Endothelial Surface Protrusion by a Point Force

During leukocyte rolling on the endothelium, surface protrusion and membrane tether extraction occur consecutively on leukocytes. Both surface protrusion and tether extraction of leukocytes stabilize leukocyte rolling. Tethers can also be extracted from endothelial cells (ECs), but surface protrusion of ECs has never been confirmed to exist. In this study, we examined EC surface protrusion with the micropipette aspiration technique. We found that, like leukocytes, surface protrusion on an EC did exist when a point force was imposed. Both the protrusional stiffness and the crossover force of EC surface protrusion were dependent on the force loading rate and the cytoskeletal integrity, but neither of them was dependent on tumor necrosis factor α stimulation. Temperature (37°C) affected the protrusional stiffness only at small force loading rates. When a neutrophil was employed to directly impose the pulling force on the EC, simultaneous surface protrusion from both cells occurred, and it can be modeled as two springs connected in series, although the spring constants should be adjusted according to the force loading rate. Therefore, EC surface protrusion is an important aspect of leukocyte rolling, and it should not be ignored when leukocyte rolling stability is studied systematically.     

Membrane tether extraction from human umbilical vein endothelial cells and its implication in leukocyte rolling

During the rolling of human neutrophils on the endothelium, tethers (cylindrical membrane tubes) are likely extracted from the neutrophil. Tether extraction reduces the force imposed on the adhesive bond between the neutrophil and endothelium, thereby facilitating the rolling. However, whether tethers can be extracted from the endothelium is still unknown. Here, with the micropipette-aspiration technique, we show that tethers can be extracted from either suspended or attached human umbilical vein endothelial cells. We also show that a linear relationship between the pulling force and tether growth velocity exists and this relationship does not depend on the receptor type (used to impose point forces), tumor necrosis factor-alpha stimulation, or cell attachment state. With linear regression, we determined that the threshold force was 50 pN and the effective viscosity was 0.50 pN.s/microm. Therefore, tethers might be simultaneously extracted from the neutrophil and endothelial cell during the rolling and, more importantly, the endothelial cell might contribute much more to the total composite tether length than the neutrophil. Compared with tether extraction from the neutrophil alone, simultaneous tether extraction results in a larger increase in the lifetime of the adhesive bond, and thus further stabilizes the rolling of neutrophils under high physiological shear stresses.     

Tangential Tether Extraction and Spontaneous Tether Retraction of Human Neutrophils

Membrane tethers are extracted when neutrophils roll on the endothelium to initiate their transendothelial migration. Tether extraction from both neutrophils and endothelial cells stabilizes neutrophil rolling, so it has been studied extensively and the force-velocity relationship for tether extraction is of great interest. Due to limitations of the techniques used in previous studies, this relationship has been obtained only from tethers perpendicular to the cell surface. Here, with the microcantilever technique, where latex beads affixed on silicon cantilevers were used as the force transducer, we extracted tethers either perpendicular or tangential to the neutrophil surface. We found that the force-velocity relationship was not sensitive to tether pulling direction. Little movement of the tether-cell junction was observed during tangential tether extraction, and no coalescence was observed during multiple tether extraction. Following adhesion rupture, spontaneous tether retraction was visualized by membrane staining, which revealed two phases: one was fast and exponential, whereas the other was slow and linear. Both phases can be reproduced with a mechanical model. These results show for the first time, to our knowledge, how neutrophil tethers shorten upon instantaneous force removal, and furthermore, they illustrate how membrane tethers contribute to neutrophil rolling stability during the inflammatory response.     

Effect of temperature on tether extraction, surface protrusion, and cortical tension of human neutrophils

Neutrophil rolling on endothelial cells, the initial stage of its migrational journey to a site of inflammation, is facilitated by tether extraction and surface protrusion. Both phenomena have been studied extensively at room temperature, which is considerably lower than human body temperature. It is known that temperature greatly affects cellular mechanical properties such as viscosity. Therefore, we carried out tether extraction, surface protrusion, and cortical tension experiments at 37 degrees C with the micropipette aspiration technique. The experimental temperature was elevated using a custom-designed microscope chamber for the micropipette aspiration technique. To evaluate the constant temperature assumption in our experiments, the temperature distribution in the whole chamber was computed with finite element simulation. Our simulation results showed that temperature variation around the location where our experiments were performed was less than 0.2 degrees C. For tether extraction at 37 degrees C, the threshold force required to pull a tether (40 pN) was not statistically different from the value at room temperature (51 pN), whereas the effective viscosity (0.75 pN.s/microm) decreased significantly from the value at room temperature (1.5 pN.s/microm). Surface protrusion, which was modeled as a linear deformation, had a slightly smaller spring constant at 37 degrees C (40 pN/microm) than it did at room temperature (56 pN/microm). However, the cortical tension at 37 degrees C (5.7+/-2.2 pN/microm) was substantially smaller than that at room temperature (23+/-8 pN/microm). These data clearly suggest that neutrophils roll differently at body temperature than they do at room temperature by having distinct mechanical responses to shear stress of blood flow.     

Simultaneous tether extraction contributes to neutrophil rolling stabilization: a model study

Neutrophil rolling is the initial step of neutrophil recruitment to sites of inflammation. During the rolling, membrane tethers are very likely extracted from both the neutrophil and the endothelial cell lining of vessel walls. Here, we present a two-dimensional neutrophil-rolling model to investigate whether and how membrane tethers contribute to stable neutrophil rolling. In our model, neutrophils are assumed to be rigid spheres covered with randomly distributed deformable microvilli, and endothelial cells are modeled as flat membrane surfaces decorated with evenly distributed ligands. The instantaneous rolling velocity and other unknowns of the model are calculated by coupling the hydrodynamic resistance functions, the geometric relationships, and the constitutive equations that govern microvillus extension and tether extraction. Our results show that glutaraldehyde-fixed neutrophils (without microvillus extension or tether extraction) roll unstably on a P-selectin-coated substrate with large variance in rolling velocity. In contrast, normal neutrophils roll much more stably, with small variance in rolling velocity. Compared with tether extraction from the neutrophil alone, simultaneous tether extraction from the neutrophil and endothelial cell greatly increases the lifetime of the adhesive bond that mediates the rolling, allows more transient tethers to make the transition into stable rolling, and enables rolling neutrophils to be more shear-resistant.     

Cell protrusions and tethers: a unified approach

Low pulling forces applied locally to cell surface membranes produce viscoelastic cell surface protrusions. As the force increases, the membrane can locally separate from the cytoskeleton and a tether forms. Tethers can grow to great lengths exceeding the cell diameter. The protrusion-to-tether transition is known as the crossover. Here we propose a unified approach to protrusions and tethers providing, to our knowledge, new insights into their biomechanics. We derive a necessary and sufficient condition for a crossover to occur, a formula for predicting the crossover time, conditions for a tether to establish a dynamic equilibrium (characterized by constant nonzero pulling force and tether extension rate), a general formula for the tether material after crossover, and a general modeling method for tether pulling experiments. We introduce two general protrusion parameters, the spring constant and effective viscosity, valid before and after crossover. Their first estimates for neutrophils are 50 pN μm⁻¹ and 9 pN s μm⁻¹, respectively. The tether elongation after crossover is described as elongation of a viscoelastic-like material with a nonlinearly decaying spring (NLDs-viscoelastic material). Our model correctly describes the results of the published protrusion and tether pulling experiments, suggesting that it is universally applicable to such experiments.     

Double tether extraction from human neutrophils and its comparison with CD4+ T-lymphocytes

The initial arrest and subsequent rolling of a leukocyte on the vascular endothelium is believed to be facilitated by the extraction of tethers, which are narrow membranous tubes drawn from the leukocyte. Although single tether extraction from neutrophils has been studied thoroughly, the relationship between the tether force (F) and tether-growth velocity (U(t)) is still unknown for double tethers drawn from neutrophils. In this study, we have determined this relationship with the micropipette-aspiration technique. As a comparison, tether extraction from CD4+ T-lymphocytes was also studied. The threshold force and effective viscosity for single tether extraction from passive CD4+ T-lymphocytes were found to be 46 pN and 1.55 pN x s/microm, respectively. These values were modulated by stimulation with phorbol myristate acetate (PMA), but not interleukin-8 (IL-8). More importantly, for both types of leukocyte, the threshold force and effective viscosity for double tether extraction are about twice as large as those corresponding to single tether extraction. Neither IL-8 nor PMA stimulation had any effect on this correlation. These results indicate that double tethers are highly localized on cellular surfaces and independent of each other during the rolling process.     

Direct observation of membrane tethers formed during neutrophil attachment to platelets or P-selectin under physiological flow

Adhesion and subsequent aggregation between neutrophils and platelets is dependent upon the initial binding of P-selectin on activated platelets to P-selectin glycoprotein ligand 1 (PSGL-1) on the microvilli of neutrophils. High speed, high resolution videomicroscopy of flowing neutrophils interacting with spread platelets demonstrated that thin membrane tethers were pulled from neutrophils in 32 +/- 4% of the interactions. After capture by spread platelets, neutrophil membrane tethers (length of 5.9 +/- 4.1 microm, n = 63) were pulled at an average rate of 6-40 microm/s as the wall shear rate was increased from 100-250 s(-1). The average tether lifetime decreased significantly (P < 0.001) from 630 to 133 ms as the shear rate was increased from 100 s(-1) (F(bond) = 86 pN) to 250 s(-1) (F(bond) = 172 pN), which is consistent with P-selectin/PSGL-1 bond dynamics under stress. Tether formation was blocked by antibodies against P-selectin or PSGL-1, but not by anti-CD18 antibodies. During neutrophil rolling on P-selectin at 150 s(-1), thin membrane tethers were also pulled from the neutrophils. The characteristic jerking motion of the neutrophil coexisted with tether growth (8.9 +/- 8.8 microm long), whereas tether breakage (average lifetime of 3.79 +/- 3.32 s) caused an acute jump in the rolling velocity, proving multiple bonding in the cell surface and the tether surface contact area. Extremely long membrane tethers (>40 microm) were sometimes pulled, which detached in a flow-dependent mechanism of microparticle formation. Membrane tethers were also formed when neutrophils were perfused over platelet monolayers. These results are the first visualization of the often hypothesized tethers that shield the P-selectin/PSGL-1 bond from force loading to regulate neutrophil rolling during inflammation and thrombosis.     

Simultaneous tether extraction from endothelial cells and leukocytes: observation, mechanics, and significance

It has been hypothesized, from earlier studies on single-tether extraction from individual leukocytes and human umbilical vein endothelial cells, that during rolling of leukocytes on the endothelium, simultaneous extraction of membrane nanotubes (tethers) occurs, resulting in enhancement of the force decrease on the adhesive bond. In this study, using the micropipette aspiration technique and fluorescence microscopy, we show that tethers are indeed extracted simultaneously when an endothelial cell and a leukocyte are separated after brief contact and adhesion, and the endothelial cell contributes much more to the composite tether length. In addition, the constitutive relationship for simultaneous tether extraction is determined with neutrophils and T-lymphocytes as force transducers, and cytokine-stimulated human umbilical vein and dermal microvascular endothelial cells as substrates, respectively. This relationship is consistent with that derived theoretically from the constitutive equations for single-tether extraction from either cell alone. Moreover, we show that simultaneous tether extraction was likely terminated by receptor-ligand bond dissociation. With a biomechanical model of leukocyte rolling, we predict the force history of the adhesive receptor-ligand bond and show that it is remarkably similar for different leukocyte-endothelial cell pairs. Simultaneous tether extraction therefore represents a generic mechanism for stabilizing leukocyte rolling on the endothelium.     

Molecular structure of membrane tethers

Membrane tethers are nanotubes formed by a lipid bilayer. They play important functional roles in cell biology and provide an experimental window on lipid properties. Tethers have been studied extensively in experiments and described by theoretical models, but their molecular structure remains unknown due to their small diameters and dynamic nature. We used molecular dynamics simulations to obtain molecular-level insight into tether formation. Tethers were pulled from single-component lipid bilayers by application of an external force to a lipid patch along the bilayer normal or by lateral compression of a confined bilayer. Tether development under external force proceeded by viscoelastic protrusion followed by viscous lipid flow. Weak forces below a threshold value produced only a protrusion. Larger forces led to a crossover to tether elongation, which was linear at a constant force. Under lateral compression, tethers formed from undulations of unrestrained bilayer area. We characterized in detail the tether structure and its formation process, and obtained the material properties of the membrane. To our knowledge, these results provide the first molecular view of membrane tethers.     

Mechanical anchoring strength of L-selectin, beta2 integrins, and CD45 to neutrophil cytoskeleton and membrane.

The strength of anchoring of transmembrane receptors to cytoskeleton and membrane is important in cell adhesion and cell migration. With micropipette suction, we applied pulling forces to human neutrophils adhering to latex beads that were coated with antibodies to CD62L (L-selectin), CD18 (beta2 integrins), or CD45. In each case, the adhesion frequency between the neutrophil and bead was low, and our Monte Carlo simulation indicates that only a single bond was probably involved in every adhesion event. When the adhesion between the neutrophil and bead was ruptured, it was very likely that receptors were extracted from neutrophil surfaces. We found that it took 1-2 s to extract an L-selectin at a force range of 25-45 pN, 1-4 s to extract a beta2 integrin at a force range of 60-130 pN, and 1-11 s to extract a CD45 at a force range of 35-85 pN. Our results strongly support the conclusion that, during neutrophil rolling, L-selectin is unbound from its ligand when the adhesion between neutrophils and endothelium is ruptured.     

Nano- to microscale dynamics of P-selectin detachment from leukocyte interfaces. II. Tether flow terminated by P-selectin dissociation from PSGL-1

We have used a biomembrane force probe decorated with P-selectin to form point attachments with PSGL-1 receptors on a human neutrophil (PMN) in a calcium-containing medium and then to quantify the forces experienced by the attachment during retraction of the PMN at fixed speed. From first touch to final detachment, the typical force history exhibited the following sequence of events: i), an initial linear-elastic displacement of the PMN surface, ii), an abrupt crossover to viscoplastic flow that signaled membrane separation from the interior cytoskeleton and the beginning of a membrane tether, and iii), the final detachment from the probe tip most often by one precipitous step of P-selectin:PSGL-1 dissociation. Analyzing the initial elastic response and membrane unbinding from the cytoskeleton in our companion article I, we focus in this article on the regime of tether extrusion that nearly always occurred before release of the extracellular adhesion bond at pulling speeds > or =1 microm/s. The force during tether growth appeared to approach a plateau at long times. Examined over a large range of pulling speeds up to 150 microm/s, the plateau force exhibited a significant shear thinning as indicated by a weak power-law dependence on pulling speed, f(infinity) = 60 pN(nu(pull)/microm/s)(0.25). Using this shear-thinning response to describe the viscous element in a nonlinear Maxwell-like fluid model, we show that a weak serial-elastic component with a stiffness of approximately 0.07 pN/nm provides good agreement with the time course of the tether force approach to the plateau under constant pulling speed.     

Ethanol enhances neutrophil membrane tether growth and slows rolling on P-selectin but reduces capture from flow and firm arrest on IL-1-treated endothelium

The effects of ethanol at physiological concentrations on neutrophil membrane tether pulling, adhesion lifetime, rolling, and firm arrest behavior were studied in parallel-plate flow chamber assays with adherent 1-microm-diameter P-selectin-coated beads, P-selectin-coated surfaces, or IL-1-stimulated human endothelium. Ethanol (0.3% by volume) had no effect on P-selectin glycoprotein ligand-1 (PSGL-1), L-selectin, or CD11b levels but caused PSGL-1 redistribution. Also, ethanol prevented fMLP-induced CD11b up-regulation. During neutrophil collisions with P-selectin-coated beads at venous wall shear rates of 25-100 s(-1), ethanol increased membrane tether length and membrane growth rate by 2- to 3-fold but reduced the adhesion efficiency (detectable bonding per total collisions) by 2- to 3-fold, compared with untreated neutrophils. Without ethanol treatment, adhesion efficiency and adhesion lifetime declined as wall shear rate was increased, whereas ethanol caused the adhesion lifetime over all events to increase from 0.1 s to 0.5 s as wall shear rate was increased, an example of pharmacologically induced hydrodynamic thresholding. Consistent with this increased membrane fluidity and reduced capture, ethanol reduced rolling velocity by 37% and rolling flux by 55% on P-selectin surfaces at 100 s(-1), compared with untreated neutrophils. On IL-1-stimulated endothelium, rolling velocity was unchanged by ethanol treatment, but the fraction of cells converting to firm arrest was reduced from 35% to 24% with ethanol. Overall, ethanol caused competing biophysical and biochemical effects that: 1) reduced capture due to PSGL-1 redistribution, 2) reduced rolling velocity due to increased membrane tether growth, and 3) reduced conversion to firm arrest.     

Single membrane tether extraction from adult and neonatal dermal microvascular endothelial cells

Membrane tethers were found to be extracted from leukocytes and macrovascular endothelial cells (e.g., human umbilical vein endothelial cells or HUVECs) when a point pulling force was exerted. These tethers stabilize leukocyte rolling on the endothelium during the inflammatory response. However, little is known about tether extraction from other vascular cells like microvascular endothelial cells (MECs). In this study, we extracted tethers from both adult and neonatal dermal MECs with the micropipette aspiration technique. We found a linear relationship between the pulling force and tether growth velocity for both cell lines. This constitutive relationship is mainly determined by the membrane mechanical property and the underlying actin-based cytoskeleton for both attached and suspended endothelial cells. It is independent of cell surface receptor type, attachment state, cytokine stimulation, or cell lineage. For both types of MECs, the threshold forces are 50 pN and the effective viscosities are around 0.5 pN·s/µm. These results, which are close to what was obtained from HUVECs, indicate that homogeneity is preserved in terms of tether extraction among different types of endothelial cells, and simultaneous tethers are likely extracted when leukocytes roll on either microvascular or macrovascular surfaces. leukocyte rolling; cell mechanics; micropipette; cytoskeleton     

Forces Required to Initiate Membrane Tether Extrusion from Cell Surface Depend on Cell Type But Not on the Surface Molecule

When a cell adhered to another cell or substratum via surface proteins is forced to detach, lipid membrane tethers are often extruded from the cell surface before the protein bond dissociates. For example, during the inflammatory reaction leukocytes roll on the surface of activated endothelial cells. The rolling adhesion is mediated by interactions of selectins with their ligands, e.g., P-selectin glycoprotein ligand (PSGL)-1, which extrudes membrane tethers from the surfaces of both leukocytes and endothelial cells. Membrane tether extrusion has been suggested to regulate leukocyte rolling. Here we examine several factors that may affect forces required to initiate membrane tethers, or initial tether force. It was found that initial tether forces were similar regardless of the presence or absence of the cytoplasmic tail of P-selectin and regardless of whether the tethers were extruded via binding to PSGL-1 or Fcγ receptors. Initial tether forces were found to depend on the cell types tested and were greatly reduced by treatment of latrunculin A, which inhibits actin polymerization. These data provide additional insights to the control of membrane tether extrusion, which should be taken into account when cellular functions such as rolling where tether extrusion plays a regulatory role are compared using different cell types expressing the same molecule.     

Neutrophil adhesion molecules in experimental rhinovirus infection in COPD

Background

COPD exacerbations are associated with neutrophilic airway inflammation. Adhesion molecules on the surface of neutrophils may play a key role in their movement from blood to the airways. We analysed adhesion molecule expression on blood and sputum neutrophils from COPD subjects and non-obstructed smokers during experimental rhinovirus infections.

Methods

Blood and sputum were collected from 9 COPD subjects and 10 smoking and age-matched control subjects at baseline, and neutrophil expression of the adhesion molecules and activation markers measured using flow cytometry. The markers examined were CD62L and CD162 (mediating initial steps of neutrophil rolling and capture), CD11a and CD11b (required for firm neutrophil adhesion), CD31 and CD54 (involved in neutrophil transmigration through the endothelial monolayer) and CD63 and CD66b (neutrophil activation markers). Subjects were then experimentally infected with rhinovirus-16 and repeat samples collected for neutrophil analysis at post-infection time points.

Results

At baseline there were no differences in adhesion molecule expression between the COPD and non-COPD subjects. Expression of CD11a, CD31, CD62L and CD162 was reduced on sputum neutrophils compared to blood neutrophils. Following rhinovirus infection expression of CD11a expression on blood neutrophils was significantly reduced in both subject groups. CD11b, CD62L and CD162 expression was significantly reduced only in the COPD subjects. Blood neutrophil CD11b expression correlated inversely with inflammatory markers and symptom scores in COPD subjects.

Conclusion

Following rhinovirus infection neutrophils with higher surface expression of adhesion molecules are likely preferentially recruited to the lungs. CD11b may be a key molecule involved in neutrophil trafficking in COPD exacerbations.     

Determination of bilayer membrane bending stiffness by tether formation from giant, thin-walled vesicles.

The curvature elastic modulus (bending stiffness) of stearoyloleoyl phosphatidylcholine (SOPC) bilayer membrane is determined from membrane tether formation experiments. R. E. Waugh and R. M. Hochmuth 1987. Biophys. J. 52:391-400) have shown that the radius of a bilayer cylinder (tether) is inversely related to the force supported along its axis. The coefficient that relates the axial force on the tether to the tether radius is the membrane bending stiffness. Thus, the bending stiffness can be calculated directly from measurements of the tether radius as a function of force. Giant (10-50-microns diam) thin-walled vesicles were aspirated into a micropipette and a tether was pulled out of the surface by gravitational forces on small glass beads that had adhered to the vesicle surface. Because the vesicle keeps constant surface area and volume, formation of the tether requires displacement of material from the projection of the vesicle in the pipette. Tethers can be made to grow longer or shorter or to maintain equilibrium by adjusting the aspiration pressure in the micropipette at constant tether force. The ratio of the change in the length of the tether to the change in the projection length is proportional to the ratio of the pipette radius to the tether radius. Thus, knowing the density and diameter of the glass beads and measuring the displacement of the projection as a function of tether length, independent determinations of the force on the tether and the tether radius were obtained. The bending stiffness for an SOPC bilayer obtained from these data is approximately 2.0 x 10(-12) dyn cm, for tether radii in the range of 20-100 nm.(ABSTRACT TRUNCATED AT 250 WORDS)     

Nano- to microscale dynamics of P-selectin detachment from leukocyte interfaces. I. Membrane separation from the cytoskeleton

We have used a biomembrane force probe decorated with P-selectin to form point attachments with PSGL-1 receptors on a human neutrophil (PMN) in a calcium-containing medium and then to quantify the forces experienced by the attachment during retraction of the PMN at fixed speed. From first touch to final detachment, the typical force history exhibited the following sequence of events: i), an initial linear-elastic displacement of the PMN surface, ii), an abrupt crossover to viscoplastic flow that signaled membrane separation from the interior cytoskeleton and the beginning of a membrane tether, and iii), the final detachment from the probe tip by usually one precipitous step of P-selectin:PSGL-1 dissociation. In this first article I, we focus on the initial elastic response and its termination by membrane separation from the cytoskeleton, initiating tether formation. Quantifying membrane unbinding forces for rates of loading (force/time) in the elastic regime from 240 pN/s to 38,000 pN/s, we discovered that the force distributions agreed well with the theory for kinetically limited failure of a weak bond. The kinetic rate for membrane unbinding was found to increase as an exponential function of the pulling force, characterized by an e-fold scale in force of approximately 17 pN and a preexponential factor, or apparent unstressed off rate, of approximately 1/s. The rheological properties of tether growth subsequent to the membrane unbinding events are presented in a companion article II.     

Simulation of cell rolling and adhesion on surfaces in shear flow: general results and analysis of selectin-mediated neutrophil adhesion.

The receptor-mediated adhesion of cells to ligand-coated surfaces in viscous shear flow is an important step in many physiological processes, such as the neutrophil-mediated inflammatory response, lymphocyte homing, and tumor cell metastasis. This paper describes a calculational method which simulates the interaction of a single cell with a ligand-coated surface under flow. The cell is idealized as a microvilli-coated hard sphere covered with adhesive springs. The distribution of microvilli on the cell surface, the distribution of receptors on microvilli tips, and the forward and reverse reaction between receptor and ligand are all simulated using random number sampling of appropriate probability functions. The velocity of the cell at each time step in the simulation results from a balance of hydrodynamic, colloidal and bonding forces; the bonding force is derived by summing the individual contributions of each receptor-ligand tether. The model can simulate the effect of many parameters on adhesion, such as the number of receptors on microvilli tips, the density of ligand, the rates of reaction between receptor and ligand, the stiffness of the resulting receptor-ligand springs, the response of springs to strain, and the magnitude of the bulk hydrodynamic stresses. The model can successfully recreate the entire range of expected and observed adhesive phenomena, from completely unencumbered motion, to rolling, to transient attachment, to firm adhesion. Also, the method can generate meaningful statistical measures of adhesion, including the mean and variance in velocity, rate constants for cell attachment and detachment, and the frequency of adhesion. We find a critical modulating parameter of adhesion is the fractional spring slippage, which relates the strain of a bond to its rate of breakage; the higher the slippage, the faster the breakage for the same strain. Our analysis of neutrophil adhesive behavior on selectin-coated (CD62-coated) surfaces in viscous shear flow reported by Lawrence and Springer (Lawrence, M.B., and T.A. Springer 1991. Cell. 65:859-874) shows the fractional spring slippage of the CD62-LECAM-1 bond is likely below 0.01. We conclude the unique ability of this selectin bond to cause neutrophil rolling under flow is a result of its unique response to strain. Furthermore, our model can successfully recreate data on neutrophil rolling as function of CD62 surface density.     

Adhesive dynamics simulations of the mechanical shedding of L-selectin from the neutrophil surface

Here we accurately recreate the mechanical shedding of L-selectin and its effect on the rolling behavior of neutrophils in vitro using the adhesive dynamics simulation by incorporating the shear-dependent shedding of L-selectin. We have previously shown that constitutively expressed L-selectin is cleaved from the neutrophil surface during rolling on a sialyl Lewis x-coated planar surface at physiological shear rates without the addition of exogenous stimuli. Utilizing a Bell-like model to describe a shedding rate which presumably increases exponentially with force, we were able to reconstruct the characteristics of L-selectin-mediated neutrophil rolling observed in the experiments. First, the rolling velocity was found to increase during rolling due to the mechanical shedding of L-selectin. When most of the L-selectin concentrated on the tips of deformable microvilli was cleaved by force exerted on the L-selectin bonds, the cell detached from the reactive plane to join the free stream as observed in the experiments. In summary, we show through detailed computational modeling that the force-dependent shedding of L-selectin can explain the rolling behavior of neutrophils mediated by L-selectin in vitro.