The strand transfer oligonucleotide inhibitors of HIV-integrase

Retroviral integrase participates in two catalytic reactions, which require interactions with the two ends of the viral DNA in the 3'processing reaction, and with a targeted host DNA in the strand transfer reaction. The 3'-hydroxyl group of 2'-deoxyadenosine resulting from the specific removing of GT dinucleotide from the viral DNA in the processing reaction provides the attachment site for the host DNA in a transesterification reaction. We synthesized oligonucleotides (ONs) of various lengths that mimic the processed HIV-1 U5 terminus of the proviral long terminal repeat (LTR) and are ended by 2'-deoxyadenosine containing a 3'-O-phosphonomethyl group. The duplex stability of phosphonomethyl ONs was increased by covalent linkage of the modified strand with its complementary strand by a triethylene glycol loop (TEG). Modified ONs containing up to 10 bases inhibited in vitro the strand transfer reaction catalyzed by HIV-1 integrase at nanomolar concentrations.     

Inhibition of HIV-1 integrase by modified oligonucleotides derived from U5' LTR.

Retroviral integrase catalyzes integration of double-stranded viral DNA into the host chromosome by a process that has become an attractive target for drug design. In the 3' processing reaction, two nucleotides are specifically cleaved from both 3' ends of viral DNA yielding a 5' phosphorylated dimer (pGT). The resulting recessed 3' hydroxy groups of adenosine provide the attachment sites to the host DNA in the strand transfer reaction. Here, we studied the effect of modified double-stranded oligonucleotides mimicking both the unprocessed (21-mer oligonucleotides) and 3' processed (19-mer oligonucleotides) U5 termini of proviral DNA on activities of HIV-1 integrase in vitro. The inhibitions of 3' processing and strand transfer reactions were studied using 21-mer oligonucleotides containing isopolar, nonisosteric, both conformationally flexible and restricted phosphonate internucleotide linkages between the conservative AG of the sequence CAGT, and using a 21-mer oligonucleotide containing 2'-fluoroarabinofuranosyladenine. All modified 21-mer oligonucleotides competitively inhibited both reactions mediated by HIV-1 integrase with nanomolar IC50 values. Our studies with 19-mer oligonucleotides showed that modifications of the 3' hydroxyl significantly reduced the strand transfer reaction. The inhibition of integrase with 19-mer oligonucleotides terminated by (S)-9-(3-hydroxy-2-phosphonomethoxypropyl)adenine, 9-(2-phosphonomethoxyethyl)adenine, and adenosine showed that proper orientation of the 3' OH group and the presence of the furanose ring of adenosine significantly influence the strand transfer reaction.     

Characterization of a replication-defective human immunodeficiency virus type 1 att site mutant that is blocked after the 3' processing step of retroviral integration

Two activities of retroviral integrase, 3' processing and DNA strand transfer, are required to integrate viral cDNA into a host cell chromosome. Integrase activity has been analyzed in vitro using purified protein and recombinant DNA substrates that model the U3 and U5 ends of viral cDNA or by using viral preintegration complexes (PICs) that form during virus infection. Numerous studies have investigated changes in integrase or viral DNA for effects on both 3' processing and DNA strand transfer activities using purified protein, but similar analyses have not been carried out using PICs. Here, we analyzed PICs from human immunodeficiency virus type 1 (HIV-1) strain 604del, an integration-defective mutant lacking 26 bp of U5, and revE1, a revertant of 604del containing an additional 19-bp deletion, for levels of 3' processing activity that occurred in infected cells and for levels of in vitro DNA strand transfer activity. Whereas revE1 supported one-third to one-half of the level of wild-type DNA strand transfer activity, the level of 604del DNA strand transfer activity was undetectable. Surprisingly, integrase similarly processed the 3' ends of 604del and revE1 in vivo. We therefore conclude that 604del is blocked in its ability to replicate in cells after the 3' processing step of retroviral integration. Whereas Western blotting showed that wild-type, revE1, and 604del PICs contained similar levels of integrase protein, Mu-mediated PCR footprinting revealed only minimal protein-DNA complex formation at the ends of 604del cDNA. We propose that 604del is replication defective because proteins important for DNA strand transfer activity do not stably associate with this cDNA after in vivo 3' processing by integrase.     

Substrate features important for recognition and catalysis by human immunodeficiency virus type 1 integrase identified by using novel DNA substrates.

The integrase encoded by human immunodeficiency virus type 1 (HIV-1) is required for integration of viral DNA into the host cell chromosome. In vitro, integrase mediates a concerted cleavage-ligation reaction (strand transfer) that results in covalent attachment of viral DNA to target DNA. With a substrate that mimics the strand transfer product, integrase carries out disintegration, the reverse of the strand transfer reaction, resolving this integration intermediate into its viral and target DNA parts. We used a set of disintegration substrates to study the catalytic mechanism of HIV-1 integrase and the interaction between the protein and the viral and target DNA sequence. One substrate termed dumbbell consists of a single oligonucleotide that can fold to form a structure that mimics the integration intermediate. Kinetic analysis using the dumbbell substrate showed that integrase turned over, establishing that HIV-1 integrase is an enzyme. Analysis of the disintegration activity on the dumbbell substrate and its derivatives showed that both the viral and target DNA parts of the molecule were required for integrase recognition. Integrase recognized target DNA asymmetrically: the target DNA upstream of the viral DNA joining site played a much more important role than the downstream target DNA in protein-DNA interaction. The site of transesterification was determined by both the DNA sequence of the viral DNA end and the structure of the branched substrate. Using a series of disintegration substrates with various base modifications, we found that integrase had relaxed structural specificity for the hydroxyl group used in transesterification and could tolerate distortion of the double-helical structure of these DNA substrates.     

Position-specific suppression and enhancement of HIV-1 integrase reactions by minor groove benzo[a]pyrene diol epoxide deoxyguanine adducts: implications for molecular interactions between integrase and substrates

The viral protein HIV-1 integrase is required for insertion of the viral genome into human chromosomes and for viral replication. Integration proceeds in two consecutive integrase-mediated reactions: 3'-processing and strand transfer. To investigate the DNA minor groove interactions of integrase relative to known sites of integrase action, we synthesized oligodeoxynucleotides containing single covalent adducts of known absolute configuration derived from trans-opening of benzo-[a]pyrene 7,8-diol 9,10-epoxide by the exocyclic 2-amino group of deoxyguanosine at specific positions in a duplex sequence corresponding to the terminus of the viral U5 DNA. Because the orientations of the hydrocarbon in the minor groove are known from NMR solution structures of duplex oligonucleotides containing these deoxyguanosine adducts, a detailed analysis of the relationship between the position of minor groove ligands and integrase interactions is possible. Adducts placed in the DNA minor groove two or three nucleotides from the 3'-processing site inhibited both 3'-processing and strand transfer. Inosine substitution showed that the guanine 2-amino group is required for efficient 3'-processing at one of these positions and for efficient strand transfer at the other. Mapping of the integration sites on both strands of the DNA substrates indicated that the adducts both inhibit strand transfer specifically at the minor groove bound sites and enhance integration at sites up to six nucleotides away from the adducts. These experiments demonstrate the importance of position-specific minor groove contacts for both the integrase-mediated 3'-processing and strand transfer reactions.     

Identification of discrete functional domains of HIV-1 integrase and their organization within an active multimeric complex.

HIV-1 integrase protein possesses the 3' processing and DNA strand transfer activities that are required to integrate HIV DNA into a host chromosome. The N-, C-terminal and core domains of integrase are necessary for both activities in vitro. We find that certain pairs of mutant integrase proteins, which are inactive when each protein is assayed alone, can support near wild type levels of activity when both proteins are present together in the reaction mixture. This complementation implies that HIV-1 integrase functions as a multimer and has enabled us to probe the organization of the functional domains within active mixed multimers. We have identified a minimal set of functional integrase domains that are sufficient for 3' processing and DNA strand transfer and find that some domains are contributed in trans by separate monomers within the functional complex.     

Homogeneous high-throughput screening assays for HIV-1 integrase 3beta-processing and strand transfer activities

HIV-1 integrase (HIV-IN) is a well-validated antiviral drug target catalyzing a multistep reaction to incorporate the HIV-1 provirus into the genome of the host cell. Small molecule inhibitors of HIV-1 integrase that specifically target the strand transfer step have demonstrated efficacy in the suppression of virus propagation. However, only few specific strand transfer inhibitors have been identified to date, and the need to screen for novel compound scaffolds persists. Here, the authors describe 2 homogeneous time-resolved fluorescent resonance energy transfer-based assays for the measurement of HIV-1 integrase 3'-processing and strand transfer activities. Both assays were optimized for high-throughput screening formats, and a diverse library containing more than 1 million compounds was screened in 1536-well plates for HIV-IN strand transfer inhibitors. As a result, compounds were found that selectively affect the enzymatic strand transfer reaction over 3beta processing. Moreover, several bioactive molecules were identified that inhibited HIV-1 reporter virus infection in cellular model systems. In conclusion, the assays presented herein have proven their utility for the identification of mechanistically interesting and biologically active inhibitors of HIV-1 integrase that hold potential for further development into potent antiviral drugs.     

HIV-1整合酶四聚体结构模拟及其活性位点分析

HIV-1复制需要HIV-1整合酶将其环状DNA整合进宿主DNA中,这其中包括2个重要反应,即“3′-加工”和“链转移”,两者均由HIV-1整合酶催化完成.阻断其中的任一反应,都能达到抑制HIV-1复制的目的.因此,了解HIV-1整合酶的完整结构和聚合状态,对深入探讨其作用机理及设计新型抑制剂具有重要的指导作用.然而,迄今为止仅有HIV-1整合酶单独结构域的晶体结构可供参考,而其全酶晶体结构尚未获得解析.本研究利用分子模拟技术,通过蛋白质 蛋白质/DNA分子对接、动力学模拟等方法,构建了全长整合酶四聚体的结构模型、HIV-1 DNA与整合酶复合物的结构模型,进一步从理论上证实HIV-1整合酶是以四聚体形态发挥催化作用,明确“3′-加工”和“链转移”在HIV-1整合酶上的催化位点.同时,通过与作用机理相似的细菌转座子Tn5转座酶等的结构比对,推测HIV-1整合酶的核心结构域中应有第2个Mg^２＋存在,其位置螯合于Asp64与Glu152之间.在HIV-1整合酶结构研究的基础上,有望进一步设计出新的抗艾滋病药物.     

High affinity interaction of HIV-1 integrase with specific and non-specific single-stranded short oligonucleotides.

Retroviral integrase (IN) catalyzes the integration of double-stranded viral DNA into the host cell genome. The reaction can be divided in two steps: 3'-end processing and DNA strand transfer. Here we studied the effect of short oligonucleotides (ODNs) on human immunodeficiency virus type 1 (HIV-1) IN. ODNs were either specific, with sequences representing the extreme termini of the viral long terminal repeats, or nonspecific. All ODNs were found to competitively inhibit the processing reaction with Ki values in the nM range for the best inhibitors. Our studies on the interaction of IN with ODNs also showed that: (i) besides the 3'-terminal GT, the interaction of IN with the remaining nucleotides of the 21-mer specific sequence was also important for an effective interaction of the enzyme with the substrate; (ii) in the presence of specific ODNs the activity of the enzyme was enhanced, a result which suggests an ODN-induced conformational change of HIV-1 IN.     

Processing of deoxyuridine mismatches and abasic sites by human immunodeficiency virus type-1 integrase.

We have examined the activities of HIV-1 integrase on substrates containing mismatches, composed of deoxyuridine at different positions in either the processed or nonprocessed strand of viral DNA, within and near the conserved CA dinucleotide of the U5 end of the HIV-1 LTR. Substitution in the processed strand of either the C or A of the CA dinucleotide or of the G 5' to the CA reduced strand transfer six-, three- and seven-fold respectively. 3'-processing was also reduced by substitution at the GC but not at the A. Substitution in the nonprocessed strand of the G nucleotide at the processing site abolished strand transfer while substitution of the T had no effect. DNA binding of HIV-1 integrase was not affected by deoxyuridine substitutions. Deoxyuridine substitution outside the trinucleotide remained compatible with enzyme activity. Enzymatically generated abasic sites were created at each mismatch to determine the effect of a missing base on integrase activity. Consistent with the deoxyuridine mismatch observations, 3'-processing and strand transfer were abolished when the abasic site was substituted for either of the nucleotides of the GCA trinucleotide. Integrase was, however, able to tolerate mismatches within this trinucleotide during the disintegration reaction. Taken together, these results suggest that base-mismatched or base-deleted substrates, which can be created by the proofreading-deficient HIV-1 RT, can be tolerated by HIV-1 integrase when located outside of the GCA trinucleotide at the U5 end of the LTR.     

Mapping of HIV-1 integrase preferences for target site selection with various oligonucleotides

HIV integrase (IN) catalyzes the insertion of proviral DNA into the host cell chromosome. While IN has strict sequence requirements for the viral cDNA ends, the integration site preference has been shown to be very diverse. Here, we mapped the HIV IN strand transfer reaction requirements using various short oligonucleotides (ON) that mimic the target DNA. Most double stranded DNA dodecamers served as excellent IN targets with variable integration efficiency depending mostly on the ON sequences. The preferred integration was lost with any changes in the geometry of the DNA double helical structures. Various hairpin-loop-forming ONs also served as efficient integration targets. Similar integration preferences were also observed for ONs, in which the nucleotide hairpin loop was replaced with a flexible aliphatic linker. The integration biases with all target DNA structures tested were significantly influenced by changes in the resulting secondary ON structures.     

Efficient magnesium-dependent human immunodeficiency virus type 1 integrase activity.

The integrase protein from human immunodeficiency virus type 1 (HIV-1) has generally been reported to require Mn2+ for efficient in vitro activity. We have reexamined the divalent metal ion requirements of HIV-1 integrase and find that the protein is capable of promoting efficient 3' processing and DNA strand transfer with either Mn2+ or Mg2+. The metal ion preference depended upon the reaction conditions. HIV-1 integrase displayed significantly less nonspecific nuclease activity in reaction mixtures containing Mg2+ than it did under the previously described reaction conditions with mixtures containing Mn2+.     

3'-processing and strand transfer catalysed by retroviral integrase in crystallo

Retroviral integrase (IN) is responsible for two consecutive reactions, which lead to insertion of a viral DNA copy into a host cell chromosome. Initially, the enzyme removes di- or trinucleotides from viral DNA ends to expose 3'-hydroxyls attached to the invariant CA dinucleotides (3'-processing reaction). Second, it inserts the processed 3'-viral DNA ends into host chromosomal DNA (strand transfer). Herein, we report a crystal structure of prototype foamy virus IN bound to viral DNA prior to 3'-processing. Furthermore, taking advantage of its dependence on divalent metal ion cofactors, we were able to freeze trap the viral enzyme in its ground states containing all the components necessary for 3'-processing or strand transfer. Our results shed light on the mechanics of retroviral DNA integration and explain why HIV IN strand transfer inhibitors are ineffective against the 3'-processing step of integration. The ground state structures moreover highlight a striking substrate mimicry utilized by the inhibitors in their binding to the IN active site and suggest ways to improve upon this clinically relevant class of small molecules.     

Inhibition of HIV-1 Integration by Mono- & Bifunctionalized Triple Helix Forming Oligonucleotides

Abstract

HIV-1 DNA integration is carried out by integrase, a viral protein which binds to specific sequences located on both extremities of the HIV-1 DNA LTR. Inhibition of integration was observed with submicromolar concentrations of mono- or bifunctionalized 11-mer oligonucleotide-intercalators, which were designed to form an alternate strand triple helix with the U5 LTR end containing two adjacent purine tracts on opposite strands 5′-GGAAAATCTCT-3′/3′-CCTTTTAGAGA-5′.     

Activity of recombinant HIV-1 integrase on mini-HIV DNA

Integration of the human immunodeficiency virus type 1 (HIV-1) cDNA into the genome of a human cell is an essential step in the viral replication cycle. Understanding of the integration process has been facilitated by the development of in vitro assays using specific oligonucleotides and recombinant integrase. However, understanding of the biology of retroviral integration will require in vitro and in vivo model systems using long DNA substrates that mimic the HIV cDNA. We have now studied the activity of recombinant HIV-1 integrase on a linear 4.7 kb double-stranded DNA, containing flanking regions of approximately 200 bp that represent the intact ends of the HIV-1 long terminal repeat (LTR) sequences (mini-HIV). The strand transfer products of the integration reaction can be directly visualized after separation in agarose gels by ethidium bromide staining. The most prominent reaction product resulted from integration of one LTR end into another LTR end (U5 into U5 and U5 into U3). Sequence analysis of the reaction products showed them to be products of legitimate integration preceded by correct processing of the viral LTR ends. Hotspots for integration were detected. Electron microscopy revealed the presence of a range of reaction products resulting from single or multiple integration events. The binding of HIV-1 integrase to mini-HIV DNA was visualized. Oligomers of integrase seem to induce DNA looping whereby the enzyme often appears to be bound to the DNA substrate that adopts the structure of a three-site synapsis that is reminiscent of the Mu phage transposase complex.     

Virtual screening application of a model of full-length HIV-1 integrase complexed with viral DNA

To address the absence of experimental data on the full-length structure of HIV-1 integrase and the way it binds to viral and human DNA, we had previously [Karki, R. G.; Tang, Y.; Burke, T. R., Jr.; Nicklaus, M. C. J. Comput. Aided Mol. Des.2004, 18, 739] constructed models of full-length HIV-1 integrase complexed with models of viral and human DNA. Here we describe the discovery of novel HIV-1 integrase strand transfer inhibitors based on one of these models. Virtual screening methods including docking and filtering by predicted ADME/Tox properties yielded several microM level inhibitors of the strand transfer reaction catalyzed by wild-type HIV-1 integrase.     

Both substrate and target oligonucleotide sequences affect in vitro integration mediated by human immunodeficiency virus type 1 integrase protein produced in Saccharomyces cerevisiae.

Integration of retroviral DNA into the host cell genome requires the interaction of retroviral integrase (IN) protein with the outer ends of both viral long terminal repeats (LTRs) to remove two nucleotides from the 3' ends (3' processing) and to join the 3' ends to newly created 5' ends in target DNA (strand transfer). We have purified the IN protein of human immunodeficiency virus type 1 (HIV-1) after production in Saccharomyces cerevisiae and found it to have many of the properties described for retroviral IN proteins. The protein performs both 3' processing and strand transfer reactions by using HIV-1 or HIV-2 attachment (att) site oligonucleotides. A highly conserved CA dinucleotide adjacent to the 3' processing site of HIV-1 is important for both the 3' processing and strand transfer reactions; however, it is not sufficient for full IN activity, since alteration of nucleotide sequences internal to the HIV-1 U5 CA also impairs IN function, and Moloney murine leukemia virus att site oligonucleotides are poor substrates for HIV-1 IN. When HIV-1 att sequences are positioned internally in an LTR-LTR circle junction substrate, HIV-1 IN fails to cleave the substrate preferentially at positions coinciding with correct 3' processing, implying a requirement for positioning att sites near DNA ends. The 2 bp normally located beyond the 3' CA in linear DNA are not essential for in vitro integration, since mutant oligonucleotides with single-stranded 3' or 5' extensions or with no residues beyond the CA dinucleotide are efficiently used. Selection of target sites is nonrandom when att site oligonucleotides are joined to each other in vitro. We modified an in vitro assay to distinguish oligonucleotides serving as the substrate for 3' processing and as the target for strand transfer. The modified assay demonstrates that nonrandom usage of target sites is dependent on the target oligonucleotide sequence and independent of the oligonucleotide used as the substrate for 3' processing.