Rapid and specific detection of RNA base sequence using fluorescence polarization.

Rapid and specific determination of the RNA gene of hepatitis C virus (HCV), which had been multiplied by NASBA, was performed using a fluorescence polarization assay. The polarization of the probe DNA in the presence of HCV positive sample, amplified by NASBA, was obviously different from those in the presence of negative control samples. The total time for the gene amplification and detection was about 90 min, while the polarization detection was completed within 10 min. The slight increase of polarization was also confirmed with the hybridization between probe oligo-DNA 25-mers and the synthesized complementary oligo-RNA 25-mers. The polarization of positive and negative samples showed excellent agreement with the results obtained from electrophoresis and dot-blot hybridization.     

Rapid and simple detection of PCR product DNA: a comparison between Southern hybridization and fluorescence polarization analysis

The essential aim of this study was to compare two different methods, Southern hybridization and fluorescence polarization (FP) assay. They both detect specific hybridization and were examined using common asymmetric PCR products and probes. FP assay clearly showed the hybridization of probe DNAs with the asymmetric PCR products of their target genes. Southern blot patterns presented excellent consistency with the results of FP assay. In both methods, two types of Shiga toxin (vero toxin) genes held in enterohaemorrhagic Escherichia coli (EHEC) were used as target genes. For detection of the two genes, stx1 and stx2, two respective DNA probes were synthesized. Both in FP assay and in Southern hybridization, the probe for stx1 hybridized only with the product of stx1 and vice versa. The results of the DNA detection using different methods were completely in agreement. Moreover, FP assay makes it possible to detect the hybridization rapidly. In our high NaCl concentration condition, hybridization between the probes and the asymmetric PCR products could be monitored within about 15min.     

DNA hybridization assays using metal-enhanced fluorescence

We describe a new approach to DNA hybridization assays using metal-enhanced fluorescence. Thiolated oligonucleotides were bound to silver particles on a glass substrate. Addition of a complementary fluorescein-labeled oligonucleotide resulted in a dramatic time-dependent 12-fold increase in fluorescence intensity during hybridization. Proximity to silver particles resulted in a decreased fluorescence lifetime. This effect is thought to be the result of enhanced fluorescence from fluorescein near metallic silver particles. Hybridization could thus be measured from the decay kinetics of the emission, which can be measured independently from the emission intensity. These results suggest the use of silver particles as a general approach to measure DNA hybridization as a method to increase the sensitivity of DNA detection.     

Palytoxin detection and quantification using the fluorescence polarization technique

Palytoxin (PLT) is a highly toxic nonpeptidic marine natural product, with a complex chemical structure. Its mechanism of action targets Na,K-ATPase. Fluorescence polarization (FP) is a spectroscopic technique that can be used to determine molecular interactions. It is based on exciting a fluorescent molecule with plane-polarized light and measuring the polarization degree of the emitted light. In this study, FP was used to develop a detection method based on the interaction between the Na,K-ATPase and the PLT. The Na,K-ATPase was labeled with a reactive succinimidyl esther of carboxyfluorescein, and the FP of protein-dye conjugate was measured when the amount of PLT in the medium was modified. The assay protocol was first developed using ouabain as a binding molecule. The final result was a straight line that correlates FP units and PLT concentration. Within this line the PLT equivalents in a natural sample can be quantified. A selective cleaning procedure to mussel samples and dinoflagellates cultures was also developed to avoid the matrix effect. The LOQ (limit of quantification) of the method is 10nM and the LOD (limit of detection) is 2 nM. This new PLT detection method is easier, faster, and more reliable than the other methods described to date.     

The extremely rapid oligonucleotide hybridization and high throughput detection of microbial gene sequences using fluorescence polarization

The hybridization of oligonucleotide sequences complementary to the genes of Shiga toxins (verotoxins) types 1 and 2 of enterohaemorrhagic Escherichia coli (EHEC) and human hepatitis C virus (HCV) was monitored using fluorescence polarization under the reaction condition of high salt concentration (0.8 M NaCl), which was optimized to obtain a higher rate of hybridization. The time courses of hybridization of fluorescently labeled oligomers (probe DNAs) with the amplified DNA or RNA of the genes were recorded. Two methods, the asymmetric PCR and NASBA, were used to amplify the genetic DNA of Shiga toxins and that of RNA in HCV, respectively. Probe DNA sequences were designed which hybridized extremely rapidly with amplicons of the genes of Shiga toxins types 1 and 2 and that of HCV. In the cases using the three different DNA probes, the hybridization was 90% complete in about 1 min, considerably faster than that of the 3 min reported previously. The rapidity of this hybridization could not be explained by the melting temperature or the G+C content of the probe sequences but its relationship with high order structure of the single stranded DNA or RNA of the amplicons in the solution was strongly suggested.     

DNA detection by strand displacement amplification and fluorescence polarization with signal enhancement using a DNA binding protein.

Strand displacement amplification (9SDA) is an isothermal in vitro method of amplifying a DNA sequence prior to its detection. We have combined SDA with fluorescence polarization detection. A 5'-fluorescein-labelled oligodeoxynucleotide detector probe hybridizes to the amplification product that rises in concentration during SDA and the single- to double strand conversion is monitored through an increase in fluorescence polarization. Detection sensitivity can be enhanced by using a detector probe containing an EcoRI recognition sequence at its 5'-end that is not homologous to the target sequence. During SDA the probe is converted to a fully double-stranded form that specifically binds a genetically modified form of the endonuclease EcoRI which lacks cleavage activity but retains binding specificity. We have applied this SDA detection system to a target sequence specific for Mycobacterium tuberculosis.     

Testing the generation time hypothesis using DNA/DNA hybridization between artiodactyls

Heterogeneous rates of molecular change between some mammalian lineages are commonly explained by contrasts in generation time length. Here the generation time hypothesis is tested by comparing the relative rates of molecular change in related artiodactyl taxa differing by their generation time. A demographic model based on allometric relations with the adult body weight is used to estimate the cohort generation time in Bovidae and Cervidae families (Artiodactyla, Mammalia). Two pairs of closely related taxa (two cervids, two bovids) were selected, each showing clear ratios (1.5 to 3.5 times) in their generation time. Rates of genetic change in non-repeated nuclear DNA were estimated by DNA/DNA hybridization experiments performed among these ruminants and a camelid outgroup. Relative rate tests were applied to the two pairs of ingroup taxa differing by their generation time, in order to test if shorter generation time would correspond to higher rate of molecular change. Contradictory statistical results did not show a greater accumulation of nucleotide changes in the lineage leading to the short generation time species. The recorded differences in branch lengths of sister taxa were either conflicting or too small (relative to the contrasted generation times) to reveal a generation time effect. Alternative hypotheses are suggested to explain these preliminary results.     

Ultrasensitive hybridization analysis using fluorescence correlation spectroscopy.

The hybridization of fluorescently tagged 18mer deoxyribonucleotides with complementary DNA templates was analysed by fluorescence correlation spectroscopy (FCS) in a droplet under an epi-illuminated fluorescence microscope at the level of single molecules. The interaction can be monitored by the change in the translational diffusion time of the smaller (18mer) primer when binding to the bigger (7.5 kb) DNA containing the complementary sequence. The hybridization process in the presence of template M13mp18 ssDNA was monitored in a small volume (2 x 10(-16)I) at various temperatures. The Arrhenius plot of the association rate constant shows that the activation energy was 38.8 kcal/mol, but the hybridization process may involve several components. The titration experiment suggested that approximately 2 primers can be associated with one template DNA at 40 degrees C. Results of a simple homology search for the sequences complementary to the primer indicate the existence of additional sites of lower specificity.     

The isolation and measurement of tRNAmeti using RNA/DNA hybridization

A pBR322 plasmid containing the initiator tRNAmet gene of Xenopus (pt145 - donated by Stuart Clarkson) will specifically bind to mouse initiator tRNAmet (tRNAmeti) when total mouse tRNA, extracted from uninduced Friend erythroleukemia cells, is hybridized to the gene probe. One dimensional electrophoresis of the hybridizing tRNA in 20% polyacrylamide reveals one major band (95%) and a minor band. The hybridizing tRNA has been identified as initiator tRNAmet by RNA sequencing. Hybridization of tRNAtotal to another plasmid containing the Xenopus gene for tRNAasn results in two bound species with different electrophoretic mobilities than the tRNA bound to the initiator tRNAmet gene. pt145 has been used to measure the steady state concentration of initiator tRNAmet in the uninduced and erythroid Friend cell, and in the unfertilized egg and 21 h blastula of the sea urchin. Initiator tRNAmet represents 0.91% and 0.52% of the tRNA populations extracted from uninduced and erythroid Friend cells, respectively. Based upon the total tRNA content per cell, there is a 3.8 fold decrease in initiator tRNAmet per cell during erythroid differentiation. tRNA extracted from unfertilized eggs and 21 h blastula of the sea urchin both have 0.5% of total tRNA as initiator tRNAmet (approximately 1.5 pg).     

Delineation of DNA replication time zones by fluorescence in situ hybridization.

Fluorescence in situ hybridization has been used to visualize specific genomic DNA sequences in interphase nuclei. In normal diploid cells, unreplicated DNA segments give singlet hybridization signals while replicated loci are characterized by doublets. The distribution of these two patterns in unsynchronized cell populations can be used to determine the S phase replication time of any DNA sequence. The validity of this approach was established by analyzing genes whose replication profiles in expressing and non-expressing cells had been determined previously by conventional methods. Using this technique it has been possible to map the replication timing topography of the DNA within and flanking the cystic fibrosis (CF) gene locus on chromosome 7. The gene itself is located within a defined time zone which is approximately 500 kb in length and is under developmental control. It is early replicating in cells which express CF but late replicating in other cell types. These time zones probably represent basic units of chromosome structure.     

Measuring thermodynamic details of DNA hybridization using fluorescence

Modern real-time PCR systems make it easy to monitor fluorescence while temperature is varied for hundreds of samples in parallel, permitting high-throughput studies. We employed such system to investigate melting transitions of ordered nucleic acid structures into disordered random coils. Fluorescent dye and quencher were attached to oligonucleotides in such a way that changes of fluorescence intensity with temperature indicated progression of denaturation. When fluorescence melting data were compared with traditional ultraviolet optical experiments, commonly used dye/quencher combinations, like fluorescein and tetramethylrhodamine, showed substantial discrepancies. We have therefore screened 22 commercially available fluorophores and quenchers for their ability to reliably report annealing and melting transitions. Dependence of fluorescence on temperature and pH was also investigated. The optimal performance was observed using Texas Red or ROX dyes with Iowa Black RQ or Black Hole quenchers. These labels did not alter two-state nature of duplex melting process and provided accurate melting temperatures, free energies, enthalpies, and entropies. We also suggest a new strategy for determination of DNA duplex thermodynamics where concentration of a dye-labeled strand is kept constant and its complementary strand modified with a quencher is added at increasing excess. These methodological improvements will help build predictive models of nucleic acid hybridization.     

DNA computing using single-molecule hybridization detection

DNA computing aims at using nucleic acids for computing. Since micromolar DNA solutions can act as billions of parallel nanoprocessors, DNA computers can in theory solve optimization problems that require vast search spaces. However, the actual parallelism currently being achieved is at least a hundred million-fold lower than the number of DNA molecules used. This is due to the quantity of DNA molecules of one species that is required to produce a detectable output to the computations. In order to miniaturize the computation and considerably reduce the amount of DNA needed, we have combined DNA computing with single-molecule detection. Reliable hybridization detection was achieved at the level of single DNA molecules with fluorescence cross-correlation spectroscopy. To illustrate the use of this approach, we implemented a DNA-based computation and solved a 4-variable 4-clause instance of the computationally hard Satisfiability (SAT) problem.     

Specific-primer-directed DNA sequencing using automated fluorescence detection.

Automated fluorescence-based DNA sequence analysis offers the possibility to undertake very large scale sequencing projects. Directed strategies, such as the specific-primer-directed sequencing approach ('gene walking'), should prove useful in such projects. Described herein is a study involving the use of this approach in conjunction with automated fluorescence detection on a commercial instrument (ABI 370A DNA sequencer). This includes procedures for the rapid chemical synthesis and purification of labeled primers, the design of primer sequences that are compatible with the commercial analysis software, and automated DNA sequence analysis using such primers. A set of four fluorophore-labeled primers can be reliably synthesized in a twenty-four hour period, and greater than 300 nucleotides of analyzed new sequence obtained using this set in an additional twenty-four hours. Scale-up of these procedures to take advantage of the full capabilities of the sequencer is, at present, too slow and costly to be suitable for routine sequencing, and therefore the use of specific-primers is best suited to the closure of gaps in extended sequence produced using random cloning and sequencing strategies.     

Localizing DNA and RNA within nuclei and chromosomes by fluorescence in situ hybridization.

The enormous potential of in situ hybridization derives from the unique ability of this approach to directly couple cytological and molecular information. In recent years, there has been a surge of success in powerful new applications, resulting from methodologic advances that bring the practical capabilities of this technology closer to its theoretical potential. A major advance has been improvements that enable, with a high degree of reproducibility and efficiency, precise visualization of single sequences within individual metaphase and interphase cells. This has implications for gene mapping, the analysis of nuclear organization, clinical cytogenetics, virology, and studies of gene expression. This article discusses the current state of the art of fluorescence in situ hybridization, with emphasis on applications to human genetics, but including brief discussions on studies of nuclear DNA and RNA organization, and on applications to clinical genetics and virology. Although a review of all of the literature in this field is not possible here, many of the major contributions are summarized along with recent work from our laboratory.     

Specific detection of Pseudomonas spp. in milk by fluorescence in situ hybridization using ribosomal RNA directed probes

AIMS: Pseudomonas spp. are considered the most important milk spoilage organisms. Here we describe development of a fluorescence in situ hybridization (FISH) probe specific for detection and enumeration of Pseudomonas spp. in milk. METHODS AND RESULTS: 16S rRNA sequences were analysed to develop specific oligonucleotide probe for the genus Pseudomonas. Twenty different Pseudomonas spp. and 23 bacterial species from genera other than Pseudomonas (as negative controls) were tested. All tested Pseudomonas spp. yielded a positive FISH reaction, whereas negative controls showed no FISH reaction except for Burkholderia cepacia that showed a relatively weak FISH reaction. The FISH assay specifically stains Pseudomonas in milk when the milk contains a mixture of other bacterial species. The FISH assay takes 2 h and compares favourably with current culturing methods, which take a minimum of 48 h. Specificity of the probe was validated using polymerase chain reaction to selectively amplifying the Pseudomonas rDNA gene and sequencing the gene products. CONCLUSIONS: The method presented in this study allows simultaneously detection, identification and enumeration of Pseudomonas spp. in milk. SIGNIFICANCE AND IMPACT OF THE STUDY: Rapid and accurate enumeration of Pseudomonas facilitates the identification of specific contamination sources in dairy plants, the accurate validation of pasteurization treatments and the prediction of shelf life of processed milk.     

Microarray-based methylation analysis using dual-color fluorescence hybridization

BACKGROUND: Aberrant DNA methylation of CpG sites is among the earliest and most frequent alterations in cancer. It is of great importance to develop simple, high-throughput and quantitative methods for methylation detection. METHODS: A high-throughput methylation analysis method has been developed based on microarray and dual-color fluorescence hybridization. The genomic DNA was treated with bisulfite, resulting in conversion of non-methylated cytosine, but not methylated cytosine, into uracil within CpG islands of interest. PCR products of the treated genomic templates were spotted and immobilized onto a poly-l-lysine coated glass slide to fabricate a microarray and then interrogated by hybridization with dual-color probes to determine the methylation status. The hybridized signals were obtained with a scanner and the results were analyzed with the software Genepix Pro 3.0. RESULTS: The methylation status of the CpG islands of IGFBP7 gene has been successfully evaluated by the microarray method for twenty-seven samples. All the investigated samples, including twenty human breast tumor tissues, six corresponding normal human breast tissues and one liver cell line, all CpG sites were found completely methylated. CONCLUSIONS: The microarray technology has been proven to have potential for high-throughput detection of the methylation status for a given gene in multi-genomic samples, which could be a novel approach for rapidly screening DNA methylation marker for early stage cancer diagnosis.     

Multiwavelength fluorescence detection for DNA sequencing using capillary electrophoresis.

Multiwavelength detection of laser induced fluorescence for dideoxynucleotide DNA sequencing with four different fluorophores and separation by capillary gel electrophoresis is described. A cryogenically cooled, low readout noise, 2-dimensional charge-coupled device is used as a detector for the on-line, on-column recording of emission spectra. The detection system has no moving parts and provides wavelength selectivity on a single detector device. The detection limit of fluorescently labeled oligonucleotides meets the high sensitivity requirements for capillary DNA sequencing largely due to the efficient operation of the CCD detector with a 94% duty cycle. Using the condition number as a selectivity criterion, multiwavelength detection provides better analytical selectivity than detection with four bandpass filters. Monte Carlo studies and analytical estimates show that base assignment errors are reduced with peak identification based on entire emission spectra. High-speed separation of sequencing samples and the treatment of the 2-dimensional electropherogram data is presented. Comparing the DNA sequence of a sample separated by slab gel electrophoresis with sequence from capillary gel electrophoresis and multiwavelength detection we find no significant difference in the amount of error attributable to the instrumentation.