The Properties of Chondrocyte Membrane Reservoirs and Their Role in Impact-Induced Cell Death

Impact loading of articular cartilage causes extensive chondrocyte death. Cell membranes have a limited elastic range of 3–4% strain but are protected from direct stretch during physiological loading by their membrane reservoir, an intricate pattern of membrane folds. Using a finite-element model, we suggested previously that access to the membrane reservoir is strain-rate-dependent and that during impact loading, the accessible membrane reservoir is drastically decreased, so that strains applied to chondrocytes are directly transferred to cell membranes, which fail when strains exceed 3–4%. However, experimental support for this proposal is lacking. The purpose of this study was to measure the accessible membrane reservoir size for different membrane strain rates using membrane tethering techniques with atomic force microscopy. We conducted atomic force spectroscopy on isolated chondrocytes (n = 87). A micron-sized cantilever was used to extract membrane tethers from cell surfaces at constant pulling rates. Membrane tethers could be identified as force plateaus in the resulting force-displacement curves. Six pulling rates were tested (1, 5, 10, 20, 40, and 80 μm/s). The size of the membrane reservoir, represented by the membrane tether surface areas, decreased exponentially with increasing pulling rates. The current results support our theoretical findings that chondrocytes exposed to impact loading die because of membrane ruptures caused by high tensile membrane strain rates.     

Extraction of membrane proteins from a living cell surface using the atomic force microscope and covalent crosslinkers

The force curve mode of the atomic force microscope (AFM) was applied to extract intrinsic membrane proteins from the surface of live cells using AFM tips modified by amino reactive bifunctional covalent crosslinkers. The modified AFM tips were individually brought into brief contact with the living cell surface to form covalent bonds with cell surface molecules. The force curves recorded during the detachment process from the cell surface were often characterized by an extension of a few hundred nanometers followed mostly by a single step jump to the zero force level. Collection and analysis of the final rupture force revealed that the most frequent force values (of the force) were in the range of 0.4–0.6 nN. The observed rupture force most likely represented extraction events of intrinsic membrane proteins from the cell membrane because the rupture force of a covalent crosslinking system was expected to be significantly larger than 1.0 nN, and the separation force of noncovalent ligand-receptor pairs to be less than 0.2 nN, under similar experimental conditions. The transfer of cell surface proteins to the AFM tip was verified by recording characteristic force curves of protein stretching between the AFM tips used on the cell surface and a silicon surface modified with amino reactive bifunctional crosslinkers. This method will be a useful addition to bionanotechnological research for the application of AFM.     

The Properties of Chondrocyte Membrane Reservoirs and Their Role in Impact-Induced Cell Death

Impact loading of articular cartilage causes extensive chondrocyte death. Cell membranes have a limited elastic range of 3–4% strain but are protected from direct stretch during physiological loading by their membrane reservoir, an intricate pattern of membrane folds. Using a finite-element model, we suggested previously that access to the membrane reservoir is strain-rate-dependent and that during impact loading, the accessible membrane reservoir is drastically decreased, so that strains applied to chondrocytes are directly transferred to cell membranes, which fail when strains exceed 3–4%. However, experimental support for this proposal is lacking. The purpose of this study was to measure the accessible membrane reservoir size for different membrane strain rates using membrane tethering techniques with atomic force microscopy. We conducted atomic force spectroscopy on isolated chondrocytes (n = 87). A micron-sized cantilever was used to extract membrane tethers from cell surfaces at constant pulling rates. Membrane tethers could be identified as force plateaus in the resulting force-displacement curves. Six pulling rates were tested (1, 5, 10, 20, 40, and 80 μm/s). The size of the membrane reservoir, represented by the membrane tether surface areas, decreased exponentially with increasing pulling rates. The current results support our theoretical findings that chondrocytes exposed to impact loading die because of membrane ruptures caused by high tensile membrane strain rates.     

Penetration of Cell Membranes and Synthetic Lipid Bilayers by Nanoprobes

Nanoscale devices have been proposed as tools for measuring and controlling intracellular activity by providing electrical and/or chemical access to the cytosol. Unfortunately, nanostructures with diameters of 50–500 nm do not readily penetrate the cell membrane, and rationally optimizing nanoprobes for cell penetration requires real-time characterization methods that are capable of following the process of membrane penetration with nanometer resolution. Although extensive work has examined the rupture of supported synthetic lipid bilayers, little is known about the applicability of these model systems to living cell membranes with complex lipid compositions, cytoskeletal attachment, and membrane proteins. Here, we describe atomic force microscopy (AFM) membrane penetration experiments in two parallel systems: live HEK293 cells and stacks of synthetic lipid bilayers. By using the same probes in both systems, we were able to clearly identify membrane penetration in synthetic bilayers and compare these events with putative membrane penetration events in cells. We examined membrane penetration forces for three tip geometries and 18 chemical modifications of the probe surface, and in all cases the median forces required to penetrate cellular and synthetic lipid bilayers with nanoprobes were greater than 1 nN. The penetration force was sensitive to the probe''s sharpness, but not its surface chemistry, and the force did not depend on cell surface or cytoskeletal properties, with cells and lipid stacks yielding similar forces. This systematic assessment of penetration under various mechanical and chemical conditions provides insights into nanoprobe-cell interactions and informs the design of future intracellular nanoprobes.     

Penetration of Cell Membranes and Synthetic Lipid Bilayers by Nanoprobes

Nanoscale devices have been proposed as tools for measuring and controlling intracellular activity by providing electrical and/or chemical access to the cytosol. Unfortunately, nanostructures with diameters of 50–500 nm do not readily penetrate the cell membrane, and rationally optimizing nanoprobes for cell penetration requires real-time characterization methods that are capable of following the process of membrane penetration with nanometer resolution. Although extensive work has examined the rupture of supported synthetic lipid bilayers, little is known about the applicability of these model systems to living cell membranes with complex lipid compositions, cytoskeletal attachment, and membrane proteins. Here, we describe atomic force microscopy (AFM) membrane penetration experiments in two parallel systems: live HEK293 cells and stacks of synthetic lipid bilayers. By using the same probes in both systems, we were able to clearly identify membrane penetration in synthetic bilayers and compare these events with putative membrane penetration events in cells. We examined membrane penetration forces for three tip geometries and 18 chemical modifications of the probe surface, and in all cases the median forces required to penetrate cellular and synthetic lipid bilayers with nanoprobes were greater than 1 nN. The penetration force was sensitive to the probe's sharpness, but not its surface chemistry, and the force did not depend on cell surface or cytoskeletal properties, with cells and lipid stacks yielding similar forces. This systematic assessment of penetration under various mechanical and chemical conditions provides insights into nanoprobe-cell interactions and informs the design of future intracellular nanoprobes.     

Discrete interactions in cell adhesion measured by single-molecule force spectroscopy

Cell-cell adhesion mediated by specific cell-surface molecules is essential for multicellular development. Here we quantify de-adhesion forces at the resolution of individual cell-adhesion molecules, by controlling the interactions between single cells and combining single-molecule force spectroscopy with genetic manipulation. Our measurements are focused on a glycoprotein, contact site A (csA), as a prototype of cell-adhesion proteins. csA is expressed in aggregating cells of Dictyostelium discoideum, which are engaged in development of a multicellular organism. Adhesion between two adjacent cell surfaces involves discrete interactions characterized by an unbinding force of 23 +/- 8 pN, measured at a rupture rate of 2.5 +/- 0.5 microm s-1.     

Construction of an artificial cell membrane anchor using DARC as a fitting for artificial extracellular functionalities of eukaryotic cells

The need to functionalize cell membranes in a directed way for specific applications as single cell arrays or to force close cell-to-cell contact for artificial intercellular interaction and/or induction concerning stem cell manipulation or in general to have a tool for membrane and cell surface-associated processes, we envisaged a neutral inactive membrane anchor for extracellular entities to facillitate the above mentioned functionalities.     

Templating membrane assembly, structure, and dynamics using engineered interfaces

The physical and chemical properties of biological membranes are intimately linked to their bounding aqueous interfaces. Supported phospholipid bilayers, obtained by surface-assisted rupture, fusion, and spreading of vesicular microphases, offer a unique opportunity, because engineering the substrate allows manipulation of one of the two bilayer interfaces as well. Here, we review a collection of recent efforts, which illustrates deliberate substrate-membrane coupling using structured surfaces exhibiting chemical and topographic patterns. Vesicle fusion on chemically patterned substrates results in co-existing lipid phases, which reflect the underlying pattern of surface energy and wettability. These co-existing bilayer/monolayer morphologies are useful both for fundamental biophysical studies (e.g., studies of membrane asymmetry) as well as for applied work, such as synthesizing large-scale arrays of bilayers or living cells. The use of patterned, static surfaces provides new models to design complex membrane topographies and curvatures. Dynamic switchable-topography surfaces and sacrificial trehalose based-substrates reveal abilities to dynamically introduce membrane curvature and change the nature of the membrane-substrate interface. Taken together, these studies illustrate the importance of controlling interfaces in devising model membrane platforms for fundamental biophysical studies and bioanalytical devices.     

Detachment of agglutinin-bonded red blood cells. I. Forces to rupture molecular-point attachments.

A simple micromechanical method has been developed to measure the rupture strength of a molecular-point attachment (focal bond) between two macroscopically smooth membrane capsules. In the procedure, one capsule is prepared with a low density coverage of adhesion molecules, formed as a stiff sphere, and held at fixed position by a micropipette. The second capsule without adhesion molecules is pressurized into a spherical shape with low suction by another pipette. This capsule is maneuvered to initiate point contact at the pole opposite the stiff capsule which leads to formation of a few (or even one) molecular attachments. Then, the deformable capsule is slowly withdrawn by displacement of the pipette. Analysis shows that the end-to-end extension of the capsule provides a direct measure of the force at the point contact and, therefore, the rupture strength when detachment occurs. The range for point forces accessible to this technique depends on the elastic moduli of the membrane, membrane tension, and the size of the capsule. For biological and synthetic vesicle membranes, the range of force lies between 10(-7)-10(-5) dyn (10(-12)-10(-10) N) which is 100-fold less than presently measurable by Atomic Force Microscopy! Here, the approach was used to study the forces required to rupture microscopic attachments between red blood cells formed by a monoclonal antibody to red cell membrane glycophorin, anti-A serum, and a lectin from the snail-helix pomatia. Failure of the attachments appeared to be a stochastic function of the magnitude and duration of the detachment force. We have correlated the statistical behavior observed for rupture with a random process model for failure of small numbers of molecular attachments. The surprising outcome of the measurements and analysis was that the forces deduced for short-time failure of 1-2 molecular attachments were nearly the same for all of the agglutinin, i.e., 1-2 x 10(-6) dyn. Hence, microfluorometric tests were carried out to determine if labeled agglutinins and/or labeled surface molecules were transferred between surfaces after separation of large areas of adhesive contact. The results showed that the attachments failed because receptors were extracted from the membrane.     

Optical manipulation reveals strong attracting forces at membrane contact sites between endoplasmic reticulum and chloroplasts

Eukaryote cells depend on membrane lipid trafficking from biogenic membranes, like the endoplasmic reticulum (ER), to other membranes in the cell. Two major routes for membrane lipid transport are recognized: vesicular trafficking and lipid transfer at zones of close contact between membranes. Specific ER regions involved in such membrane contact sites (MCSs) have been isolated, and lipid transfer at MCSs as well as protein-protein interactions between the partaking membranes have been demonstrated (reviewed by Holthuis, J. C. M., and Levine, T. P. (2005) Nat. Rev. 6, 209-220). Here we present the first demonstration of the physical association between membranes involved in MCSs: by using optical imaging and manipulation, strong attracting forces between ER and chloroplasts are revealed. We used Arabidopsis thaliana expressing green fluorescent protein in the ER lumen and observed leaf protoplasts by confocal microscopy. The ER network was evident, with ER branch end points apparently localized at chloroplast surfaces. After rupture of a protoplast using a laser scalpel, the cell content was released. ER fragments remained attached to the released chloroplasts and could be stretched out by optical tweezers. The applied force, 400 pN, could not drag a chloroplast free from its attached ER, which could reflect protein-protein interactions at the ER-chloroplast MCSs. As chloroplasts rely on import of ER-synthesized lipids, we propose that lipid transfer occurs at these MCSs. We suggest that lipid transfer at the MCSs also occurs in the opposite direction, for example to channel plastid-synthesized acyl groups to supply substrates for ER-localized synthesis of membrane and storage lipids.     

Single molecule studies of antibody-antigen interaction strength versus intra-molecular antigen stability

We investigated molecular recognition of antibodies to membrane-antigens and extraction of the antigens out of membranes at the single molecule level. Using dynamic force microscopy imaging and enzyme immunoassay, binding of anti-sendai antibodies to sendai-epitopes genetically fused into bacteriorhodopsin molecules from purple membranes were detected under physiological conditions. The antibody/antigen interaction strength of 70-170 pN at loading rates of 2-50 nN/second yielded a barrier width of x = 0.12 nm and a kinetic off-rate (corresponding to the barrier height) of k(off) = 6s(-1), respectively. Bacteriorhodopsin unfolding revealed a characteristic intra-molecular force pattern, in which wild-type and sendai-bacteriorhodopsin molecules were clearly distinguishable in their length distributions, originating from the additional 13 amino acid residues epitope in sendai purple membranes. The inter-molecular antibody/antigen unbinding force was significantly lower than the force required to mechanically extract the binding epitope-containing helix pair out of the membrane and unfold it (126 pN compared to 204 pN at the same loading rate), meeting the expectation that inter-molecular unbinding forces are weaker than intra-molecular unfolding forces responsible for stabilizing native conformations of proteins.     

Mechanics of cellular adhesion to artificial artery templates

We are using polymer templates to grow artificial artery grafts in vivo for the replacement of diseased blood vessels. We have previously shown that adhesion of macrophages to the template starts the graft formation. We present a study of the mechanics of macrophage adhesion to these templates on a single cell and single bond level with optical tweezers. For whole cells, in vitro cell adhesion densities decreased significantly from polymer templates polyethylene to silicone to Tygon (167, 135, and 65 cells/mm(2)). These cell densities were correlated with the graft formation success rate (50%, 25%, and 0%). Single-bond rupture forces at a loading rate of 450 pN/s were quantified by adhesion of trapped 2-microm spheres to macrophages. Rupture force distributions were dominated by nonspecific adhesion (forces <40 pN). On polystyrene, preadsorption of fibronectin or presence of serum proteins in the cell medium significantly enhanced adhesion strength from a mean rupture force of 20 pN to 28 pN or 33 pN, respectively. The enhancement of adhesion by fibronectin and serum is additive (mean rupture force of 43 pN). The fraction of specific binding forces in the presence of serum was similar for polystyrene and polymethyl-methacrylate, but specific binding forces were not observed for silica. Again, we found correlation to in vivo experiments, where the density of adherent cells is higher on polystyrene than on silica templates, and can be further enhanced by fibronectin adsorption. These findings show that in vitro adhesion testing can be used for template optimization and to substitute for in-vivo experiments.     

Aggregation of smooth muscle membranes and its use in the preparation of plasma membrane enriched fraction from gastric fundus smooth muscle

Microsomal membranes isolated from rat gastric fundus smooth muscle by differential centrifugation aggregate substantially in the presence of the divalent metal ion Mg2+ or Ca2+. The magnitude of cation-induced membrane aggregation is higher for Ca2+ than for Mg2+, but the ion concentration required for half-maximum membrane aggregation (K0.5 value) is similar for Mg2+ and Ca2+. Cation-induced membrane aggregation is suppressed by high ionic strength and low pH of the medium. Cation-induced membrane aggregation of mitochondrial membrane and plasma membrane enriched fractions differ in the rate of aggregate formation, metal ion concentration dependence, and pH dependence. Such different properties of membrane aggregation were used to prepare a plasma membrane enriched fraction by conventional differential centrifugation. Subfractionation of the heterogeneous microsomal membranes by free-flow electrophoresis indicated that smooth muscle plasma membranes showed a higher electrophoretic mobility than the intracellular membranes. These results suggest that ionic interactions on the cell membrane surfaces differ from those on the intracellular membrane surfaces and that induction of membrane aggregation by Ca2+ or Mg2+ is a useful procedure for an effective and rapid preparation of plasma membrane enriched fraction from smooth muscle.     

Single-molecule manipulation of macromolecules on GUV or SUV membranes using optical tweezers

Despite their wide applications in soluble macromolecules, optical tweezers have rarely been used to characterize the dynamics of membrane proteins, mainly due to the lack of model membranes compatible with optical trapping. Here, we examined optical trapping and mechanical properties of two potential model membranes, giant and small unilamellar vesicles (GUVs and SUVs, respectively) for studies of membrane protein dynamics. We found that optical tweezers can stably trap GUVs containing iodixanol with controlled membrane tension. The trapped GUVs with high membrane tension can serve as a force sensor to accurately detect reversible folding of a DNA hairpin or membrane binding of synaptotagmin-1 C2AB domain attached to the GUV. We also observed that SUVs are rigid enough to resist large pulling forces and are suitable for detecting protein conformational changes induced by force. Our methodologies may facilitate single-molecule manipulation studies of membrane proteins using optical tweezers.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Protein fractionation using fast flow immobilized metal chelate affinity membranes

A new group-specific affinity membrane using metal chelates as ligands and inorganic glass hollow fiber microfiltration membranes as support matrices is developed and tested. The study focused on developing the optimum activation and coupling procedures to bind the chelating agent (iminodiacetic acid, IDA) to the surface of the microporous glass hollow fiber membrane and testing the resultant affinity membrane. Starting with three different glass surfaces, five modification reactions were evaluated. All the modified "active surfaces" were first tested for their protein adsorptive properties in batch mode with suspended microporous glass grains using model proteins with known binding characteristics with Cu-IDA systems. The metal loading capacities of the surfaces exhibiting favorable fractionation were then measured by atomic absorption spectroscopy.The results were compared with the results obtained with a commercial material used in immobilized metal affinity column chromatography. The protein binding characteristics of the hollow fiber affinity membranes were also evaluated under conditions of convective flow. This was performed by flowing single solute protein solutions through the microporous membrane at different flow rates. These results were then used to estimate the optimum loading and elution times for the process. A mathematical model incorporating radial diffusion was solved using a finite difference discretization method. Comparison between model predictions and experimental results was performed for four different proteins at one flow rate. These results suggested that the kinetics of adsorption was concentration dependent. Finally, the hollow fiber affinity membranes were challenged with two component mixtures to test their ability to fractionate mixed protein solutions. Efficient separation and good purity were obtained.The results presented here represent the development of a new fast flow affinity membrane process-immobilized metal affinity membranes (IMAM). (c) 1994 John Wiley & Sons, Inc.     

Positively charged mineral surfaces promoted the accumulation of organic intermediates at the origin of metabolism

Identifying plausible mechanisms for compartmentalization and accumulation of the organic intermediates of early metabolic cycles in primitive cells has been a major challenge in theories of life’s origins. Here, we propose a mechanism, where positive membrane potentials elevate the concentration of the organic intermediates. Positive membrane potentials are generated by positively charged surfaces of protocell membranes due to accumulation of transition metals. We find that (i) positive membrane potentials comparable in magnitude to those of modern cells can increase the concentration of the organic intermediates by several orders of magnitude; (ii) generation of large membrane potentials destabilize ion distributions; (iii) violation of electroneutrality is necessary to induce nonzero membrane potentials; and (iv) violation of electroneutrality enhances osmotic pressure and diminishes reaction efficiency, resulting in an evolutionary driving force for the formation of lipid membranes, specialized ion channels, and active transport systems.     

AFM: a nanotool in membrane biology

Cellular membranes are vital for life. They confine cells and cytosolic compartments and are involved in virtually every cellular process. Cellular membranes form cellular contacts and focal adhesions, anchor the cytoskeleton, generate energy gradients, transform energy, transduce signals, move cells, and actively form compartments to assemble different membrane proteins into functional entities. But how do cellular membranes perform these tasks? What do the machineries of cellular membranes look like, and how are they controlled and guided? Atomic force microscopy (AFM) allows the observation of biological surfaces in their native environment at a signal-to-noise ratio superior to that of any optical microscopic technique. With a spatial resolution approaching approximately 1 nm, AFM can identify the supramolecular assemblies, characteristic structure, and functional conformation of native membrane proteins. In recent years, AFM has evolved from imaging applications to a multifunctional "laboratory on a tip" that allows observation and manipulation of the machineries of cellular membranes. In the force spectroscopy mode, AFM detects interactions between two single cells at molecular resolution. Force spectroscopy can also be used to probe the local elasticity, chemical groups, and receptor sites of live cells. Other applications locate molecular interactions driving membrane protein folding, assembly, and their switching between functional states. It is also possible to examine the energy landscape of biomolecular reactions, as well as reaction pathways, associated lifetimes, and free energy. In this review, we provide a flavor of the fascinating opportunities offered by the use of AFM as a nanobiotechnological tool in modern membrane biology.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Membrane-based actuation for high-speed single molecule force spectroscopy studies using AFM

Atomic force microscopy (AFM)-based dynamic force spectroscopy of single molecular interactions involves characterizing unbinding/unfolding force distributions over a range of pulling speeds. Owing to their size and stiffness, AFM cantilevers are adversely affected by hydrodynamic forces, especially at pulling speeds >10 μm/s, when the viscous drag becomes comparable to the unbinding/unfolding forces. To circumvent these adverse effects, we have fabricated polymer-based membranes capable of actuating commercial AFM cantilevers at speeds ≥100 μm/s with minimal viscous drag effects. We have used FLUENT^®, a computational fluid dynamics (CFD) software, to simulate high-speed pulling and fast actuation of AFM cantilevers and membranes in different experimental configurations. The simulation results support the experimental findings on a variety of commercial AFM cantilevers and predict significant reduction in drag forces when membrane actuators are used. Unbinding force experiments involving human antibodies using these membranes demonstrate that it is possible to achieve bond loading rates ≥10⁶ pN/s, an order of magnitude greater than that reported with commercial AFM cantilevers and systems.