Characterization of cytoskeleton mechanical properties and 3D-actin structure in twisted adherent epithelial cells

Evaluation of the cytoskeleton mechanical properties requires specific micromanipulation techniques such as the magnetic twisting cytometry technique, in which microbeads are specifically linked to the cytoskeleton via transmembrane receptors. The aim of the study was to assess the structural relationship between the bead and the cytoskeleton structure. The spatial arrangement of the CSK network was therefore studied in fixed cells probed by beads and stained for F-actin by rhodamined phallo?dine. The spatial character of the actin CSK network, both in the bead neighborhood and at the cell scale, could then be studied for various degrees of fluorescent intensity from 3D-images of the actin structure, reconstructed from z-stack views obtained by confocal microscopy. Results show the feasibility of the staining/reconstruction technique which allows to reveal the three-dimensional organization of the cytoskeleton structure including an internal cytosolic structure with a high fluorescent F-actin intensity, and a sub-membranous cortical structure with a low fluorescent F-actin intensity.     

Semiconductor fluorescent nanocrystals (quantum dots) in biological biochips

Comprehension of biological processes in cells, tissues and organisms requires identification and analysis of numerous biological objects, mechanisms of their action and regulation. Microarray (biochips) technology is a rare tool to solve this problem. It is based on high-throughput recognition of a target to the probe and has the potential to measure simultaneously the presence of numerous molecules in multiplexed testes, all contained in a small drop of test fluid. Biochips allow the parallel analysis of genomic or proteomic content in healthy versus disease-affected or altered tissues or cells. The signals read-out from the biochips is done with organic dyes which often suffer from photobleaching, low brightness and background fluorescence. Recent data show that the use of fluorescent nanocrystals "quantum dots" (QDs) allows push away these restrictions. The QDs are sufficiently bright to be detected as individual particles, extremely resistant to photobleaching and provide unique possibilities for multiplexing thus supplying the microarray technology with the novel read-out option enabling the sensitivity of detection reaching the single molecule level. This paper is aimed at the development of the approaches to the QDs application in microarray-based detection. Possibilities of QDs application both in solid state (planar) biochips as well as intensively developing technique of suspension biochips (bead-based assays or liquid biochips) are demonstrated. The latter are more and more applied for simultaneous identification of very large numbers of molecules in proteomics, genomics, drug screening and clinical diagnostics. This assays base on spectral encoded elements (as a rule polymer microbeads). The benefits of using optically encoded microbeads (instead of the solid-state two-dimensional arrays) are derived from the freedom of bead to move in three dimensions. Polymeric beads optically encoded with organic dyes allow for a limited number of unique codes, whereas the use of semiconductor nanocrystals as fluorescent tags improves the beads multiplexed imaging capabilities, photostability and sensitivity of the biological objects detection. Additionally, an employment in suspension biochips of Frster resonance energy transfer (FRET) allows improving detection specificity. The absence of fluorescent background from non-interacting with the beads dye-labelled antibodies additionally increases the sensitivity of detection and further facilitates the multiplexing capabilities of nanocrystals-based detection and diagnostics. So the combination of the biochips and QDs techniques allow increasing detection sensitivity and significantly raising the number of detected objects (multiplexing capacities). Such combination should provide the breakthrough in proteomics, particularly in new drugs development, clinical diagnostics, new disease markers identification, better understanding of intracellular mechanisms.     

The BARC biosensor applied to the detection of biological warfare agents

The Bead ARray Counter (BARC) is a multi-analyte biosensor that uses DNA hybridization, magnetic microbeads, and giant magnetoresistive (GMR) sensors to detect and identify biological warfare agents. The current prototype is a table-top instrument consisting of a microfabricated chip (solid substrate) with an array of GMR sensors, a chip carrier board with electronics for lock-in detection, a fluidics cell and cartridge, and an electromagnet. DNA probes are patterned onto the solid substrate chip directly above the GMR sensors, and sample analyte containing complementary DNA hybridizes with the probes on the surface. Labeled, micron-sized magnetic beads are then injected that specifically bind to the sample DNA. A magnetic field is applied, removing any beads that are not specifically bound to the surface. The beads remaining on the surface are detected by the GMR sensors, and the intensity and location of the signal indicate the concentration and identity of pathogens present in the sample. The current BARC chip contains a 64-element sensor array, however, with recent advances in magnetoresistive technology, chips with millions of these GMR sensors will soon be commercially available, allowing simultaneous detection of thousands of analytes. Because each GMR sensor is capable of detecting a single magnetic bead, in theory, the BARC biosensor should be able to detect the presence of a single analyte molecule.     

Synaptic differentiation can be evoked by polymer microbeads that mimic localized pericellular proteolysis by removing proteins from adjacent surfaces

Synaptic differentiation is normally "induced" by regulatory signals that are exchanged only at close contacts between neurites and their predetermined target cells. These signals can, however, be mimicked by contact of either cell with some kinds of polymer microbeads. To find what bead action is responsible for this mimicry, we compared the effects of active and inert microbeads on Xenopus muscle cells developing in culture and on glass-adsorbed films of laminin or fibronectin. Our results show that inductive bioactivity is a property of native polystyrene microbeads that (a) is not dependent merely on bead-muscle adhesion, (b) can be eliminated simply by exposing the beads to inert serum proteins, and (c) correlates closely with the ability of some beads to desorb proteins from adjacent surfaces. Quasi-synaptic differentiation of the muscle surface thus seems to be triggered by the focal removal of peripheral cell surface components, rather than by direct bead interactions with membrane receptors or ion channels or their gradual acquisition of endogenous regulatory substances. Since nerve-muscle interaction also causes an elimination of extracellular matrix proteins from the muscle surface, very early in synapse development, we consider the possibility that the extracellular degradation of peripheral surface components contributes to the transmission of inductive positional signals during synaptogenesis.     

Quantum-dot-tagged microbeads for multiplexed optical coding of biomolecules.

Multicolor optical coding for biological assays has been achieved by embedding different-sized quantum dots (zinc sulfide-capped cadmium selenide nanocrystals) into polymeric microbeads at precisely controlled ratios. Their novel optical properties (e.g., size-tunable emission and simultaneous excitation) render these highly luminescent quantum dots (QDs) ideal fluorophores for wavelength-and-intensity multiplexing. The use of 10 intensity levels and 6 colors could theoretically code one million nucleic acid or protein sequences. Imaging and spectroscopic measurements indicate that the QD-tagged beads are highly uniform and reproducible, yielding bead identification accuracies as high as 99.99% under favorable conditions. DNA hybridization studies demonstrate that the coding and target signals can be simultaneously read at the single-bead level. This spectral coding technology is expected to open new opportunities in gene expression studies, high-throughput screening, and medical diagnostics.     

Specific detection of DNA using quantum dots and magnetic beads for large volume samples

Here we present a sensitive DNA detection protocol using quantum dots (QDs) and magnetic beads (MBs) for large volume samples. In this study, QDs, conjugated with streptavidin, were used to produce fluorescent signals while magnetic beads (MBs) were used to isolate and concentrate the signals. The presence of target DNAs leads to the sandwich hybridization between the functionalized QDs, the target DNAs and the MBs. In fact, the QDs-MBs complex, which is bound using the target DNA, can be isolated and then concentrated. The binding of the QDs to the surface of the MBs was confirmed by confocal microscopy and Cd elemental analysis. It was found that the fluorescent intensity was proportional to concentration of the target DNA, while the presence of non-complementary DNA produced no significant fluorescent signal. In addition, the presence of low copies of target DNAs such as 0.5 pM in large volume samples up to 40 mL was successfully detected by using a magnet-assisted concentration protocol which consequently results in the enhancement of the sensitivity more than 100-fold.     

Sensitive bondforce measurements of ligand-receptor pairs with magnetic beads

The bondforces between biotinylated surfaces and streptavidin or avidin coated beads are investigated by a magnetic field based manipulation system for magnetic microbeads. The magnetic field is generated by currents through a set of conducting lines, and its gradient exerts a force onto the magnetic beads. The force can be increased until the bond between the bead and the surface breaks. Consistent with other groups we found two conformations for both investigated bonds. The measured bondforces for the two conformations are for Streptavidin-Biotin: 55.9 and 244.7 fN and for Avidin-Biotin: 15.9 and 58.4 fN. These very low bondforces (10-100 times smaller than earlier measurements) match to the extremely low loading rate of about 1 fN/s. This new technique thus allows to investigate biomolecular bonds by extremely low forces.     

Compact Quantum Dots for Single-molecule Imaging

Single-molecule imaging is an important tool for understanding the mechanisms of biomolecular function and for visualizing the spatial and temporal heterogeneity of molecular behaviors that underlie cellular biology ^1-4. To image an individual molecule of interest, it is typically conjugated to a fluorescent tag (dye, protein, bead, or quantum dot) and observed with epifluorescence or total internal reflection fluorescence (TIRF) microscopy. While dyes and fluorescent proteins have been the mainstay of fluorescence imaging for decades, their fluorescence is unstable under high photon fluxes necessary to observe individual molecules, yielding only a few seconds of observation before complete loss of signal. Latex beads and dye-labeled beads provide improved signal stability but at the expense of drastically larger hydrodynamic size, which can deleteriously alter the diffusion and behavior of the molecule under study.Quantum dots (QDs) offer a balance between these two problematic regimes. These nanoparticles are composed of semiconductor materials and can be engineered with a hydrodynamically compact size with exceptional resistance to photodegradation ⁵. Thus in recent years QDs have been instrumental in enabling long-term observation of complex macromolecular behavior on the single molecule level. However these particles have still been found to exhibit impaired diffusion in crowded molecular environments such as the cellular cytoplasm and the neuronal synaptic cleft, where their sizes are still too large ^4,6,7.Recently we have engineered the cores and surface coatings of QDs for minimized hydrodynamic size, while balancing offsets to colloidal stability, photostability, brightness, and nonspecific binding that have hindered the utility of compact QDs in the past ^8,9. The goal of this article is to demonstrate the synthesis, modification, and characterization of these optimized nanocrystals, composed of an alloyed Hg_xCd_1-xSe core coated with an insulating Cd_yZn_1-yS shell, further coated with a multidentate polymer ligand modified with short polyethylene glycol (PEG) chains (Figure 1). Compared with conventional CdSe nanocrystals, Hg_xCd_1-xSe alloys offer greater quantum yields of fluorescence, fluorescence at red and near-infrared wavelengths for enhanced signal-to-noise in cells, and excitation at non-cytotoxic visible wavelengths. Multidentate polymer coatings bind to the nanocrystal surface in a closed and flat conformation to minimize hydrodynamic size, and PEG neutralizes the surface charge to minimize nonspecific binding to cells and biomolecules. The end result is a brightly fluorescent nanocrystal with emission between 550-800 nm and a total hydrodynamic size near 12 nm. This is in the same size range as many soluble globular proteins in cells, and substantially smaller than conventional PEGylated QDs (25-35 nm).     

基于硒化镉量子点磁微球的微悬臂梁式免疫传感器片上磁分离

应用了以硒化镉量子点为荧光探针,具有磁性和抗体双重靶向功能的聚苯乙烯磁微球.设计了基于此种磁微球的新型微悬臂梁式免疫传感器,满足在液相环境中,借助嵌入到聚苯乙烯磁微球的荧光探针及微球表面的特异性抗体探针,达到生物分子的定性检测,借助具有纳米机械响应的微悬臂梁及微平面电感线圈,达到生物分子的定量检测及传感器的复用性,解决传统微悬臂梁式免疫传感器的不足.着重对三种粒径尺寸的硒化镉量子点进行了表征,同时针对片上磁分离的机理,梁上微电感线圈的结构,微磁场对磁微球的吸引进行了研究,设计并优化出满足新型微悬臂梁式免疫传感器所需的蛇形微平面电感线圈.通过生物磁分离实验,验证了设计及优化的结果,实现了用于生物分子分离的片上磁分离技术.     

Peptides, antibodies, and FRET on beads in flow cytometry: A model system using fluoresceinated and biotinylated beta-endorphin.

BACKGROUND: Particulate surfaces such as beads are routinely used as platforms for molecular assembly for fundamental and practical applications in flow cytometry. Molecular assembly is transduced as the direct analysis of fluorescence, or as a result of fluorescence resonance energy transfer. Binding of fluorescent ligands to beads sometimes alters their emission yield relative to the unbound ligands. Characterizing the physical basis of factors that regulate the fluorescence yield of bound fluorophores (on beads) is a necessary step toward their rational use as mediators of numerous fluorescence based applications. METHODS: We have examined the binding between two biotinylated and fluoresceinated beta-endorphin peptides and commercial streptavidin beads using flow cytometric analysis. We have analyzed the assembly between a specific monoclonal antibody and an endorphin peptide in solution using resonance energy transfer and compared the results on beads in flow cytometry using steady-state and time-resolved fluorescence. RESULTS: We have defined conditions for binding biotinylated and fluoresceinated endorphin peptides to beads. These measurements suggest that the peptide structure can influence both the intensity of fluorescence and the mode of peptide binding on the bead surface. We have defined conditions for binding antibody to the bead using biotinylated protein A. We compared and contrasted the interactions between the fluoresceinated endorphin peptide and the rhodamine- labeled antibody. In solution we measure a K(d) of <38 nM by resonance energy transfer and on beads 22 nM. DISCUSSION: Some issues important to the modular assembly of a fluorescence resonance energy transfer (FRET) based sensing scheme have been resolved. The affinity of peptides used herein is a function of their solubility in water, and the emission intensity of the bound species depends on the separation distance between the fluorescein and the biotin moiety. This is due to the quasi-specific quenching interaction between the fluorescein and a proximal binding pocket of streptavidin. Detection of antibodies in solution and on beads either by FRET or capture of fluorescent ligands by dark antibodies subsequently enables the determination of K(d) values, which indicate agreement between solution and flow cytometric determinations.     

A Bead-Based Method for Multiplexed Identification and Quantitation of DNA Sequences Using Flow Cytometry

A new multiplexed, bead-based method which utilizes nucleic acid hybridizations on the surface of microscopic polystyrene spheres to identify specific sequences in heterogeneous mixtures of DNA sequences is described. The method consists of three elements: beads (5.6-μm diameter) with oligomer capture probes attached to the surface, three fluorophores for multiplexed detection, and flow cytometry instrumentation. Two fluorophores are impregnated within each bead in varying amounts to create different bead types, each associated with a unique probe. The third fluorophore is a reporter. Following capture of fluorescent cDNA sequences from environmental samples, the beads are analyzed by flow cytometric techniques which yield a signal intensity for each capture probe proportional to the amount of target sequences in the analyte. In this study, a direct hybrid capture assay was developed and evaluated with regard to sequence discrimination and quantitation of abundances. The target sequences (628 to 728 bp in length) were obtained from the 16S/23S intergenic spacer region of microorganisms collected from polluted groundwater at the nuclear waste site in Hanford, Wash. A fluorescence standard consisting of beads with a known number of fluorescent DNA molecules on the surface was developed, and the resolution, sensitivity, and lower detection limit for measuring abundances were determined. The results were compared with those of a DNA microarray using the same sequences. The bead method exhibited far superior sequence discrimination and possesses features which facilitate accurate quantitation.     

Transport limitation of chlorine disinfection of Pseudomonas aeruginosa entrapped in alginate beads

An artificial biofilm system consisting of Pseudomonas aeruginosa entrapped in alginate and agarose beads was used to demonstrate transport limitation of the rate of disinfection of entrapped bacteria by chlorine. Alginate gel beads with or without entrapped bacteria consumed chlorine. The specific rate of chlorine consumption increased with increasing cell loading in the gel beads and decreased with increasing bead radius. The value of an observable modulus comparing the rates of reaction and diffusion ranged from less than 0.1 to 8 depending on the bead radius and cell density. The observable modulus was largest for large (3-mm-diameter) beads with high cell loading (1.8 x 10(9) cfu/cm(3)) and smallest for small beads (0.5 mm diameter) with no cells added. A chlorine microelectrode was used to measure chlorine concentration profiles in agarose beads (3.0 mm diameter). Chlorine fully penetrated cell-free agarose beads rapidly; the concentration of chlorine at the bead center reached 50% of the bulk concentration within approximately 10 min after immersion in chlorine solution. When alginate and bacteria were incorporated into an agarose bead, pronounced chlorine concentration gradients persisted within the gel bead. Chlorine did gradually penetrate the bead, but at a greatly retarded rate; the time to reach 50% of the bulk concentration at the bead center was approximately 46 h. The overall rate of disinfection of entrapped bacteria was strongly dependent on cell density and bead radius. Small beads with low initial cell loading (0.5 mm diameter, 1.1 x 10(7) cfu/cm(3)) experienced rapid killing; viable cells could not be detected (<1.6 x 10(5) cfu/cm(3)) after 15 min of treatment in 2.5 mg/L chlorine. In contrast, the number of viable cells in larger beads with a higher initial cell density (3.0 mm diameter, 2.2 x 10(9) cfu/cm(3)) decreased only about 20% after 6 h of treatment in the same solution. Spatially nonuniform killing of bacteria within the beads was demonstrated by measuring the transient release of viable cells during dissolution of the beads. Bacteria were killed preferentially near the bead surface. Experimental results were consistent with transport limitation of the penetration of chlorine into the artificial biofilm arising from a reaction-diffusion interaction. The methods reported here provide tools for diagnosing the mechanism of biofilm resistance to reactive antimicrobial agents in such applications as the treatment of drinking and cooling waters. (c) 1996 John Wiley & Sons, Inc.     

A bead-based method for multiplexed identification and quantitation of DNA sequences using flow cytometry

A new multiplexed, bead-based method which utilizes nucleic acid hybridizations on the surface of microscopic polystyrene spheres to identify specific sequences in heterogeneous mixtures of DNA sequences is described. The method consists of three elements: beads (5.6-microm diameter) with oligomer capture probes attached to the surface, three fluorophores for multiplexed detection, and flow cytometry instrumentation. Two fluorophores are impregnated within each bead in varying amounts to create different bead types, each associated with a unique probe. The third fluorophore is a reporter. Following capture of fluorescent cDNA sequences from environmental samples, the beads are analyzed by flow cytometric techniques which yield a signal intensity for each capture probe proportional to the amount of target sequences in the analyte. In this study, a direct hybrid capture assay was developed and evaluated with regard to sequence discrimination and quantitation of abundances. The target sequences (628 to 728 bp in length) were obtained from the 16S/23S intergenic spacer region of microorganisms collected from polluted groundwater at the nuclear waste site in Hanford, Wash. A fluorescence standard consisting of beads with a known number of fluorescent DNA molecules on the surface was developed, and the resolution, sensitivity, and lower detection limit for measuring abundances were determined. The results were compared with those of a DNA microarray using the same sequences. The bead method exhibited far superior sequence discrimination and possesses features which facilitate accurate quantitation.     

Ultrastructure of beaded agarose.

Beaded agarose was dehydrated and embedded in Epon by a procedure that preserves the size, shape and, most likely, the native ultrastructure of the beads. Thin sections of the embedded beads reveal under the electron microscope a network sponge-like structure, uniform throughout the bead. The matrix skeleton is fairly rigid, though it occupies only a small percentage of the bead volume. This skeleton is composed of thin filaments (~20 Å in diameter) bundled in a side-by-side assembly. The pores or channels between the filament bundles vary in shape and diameter (up to 0.3 μm). This structure accounts for some of the known physicochemical properties of beaded agarose.     

Injectable polymeric microspheres with X-ray visibility. Preparation,properties, and potential utility as new traceable bulking agents

The copolymer of methyl methacrylate (MMA) and 2-[2',3',5'-triiodobenzoyl]oxoethyl methacrylate (1), ratio 3:1 (mass:mass), was prepared via a free-radical polymerization in bulk. The copolymer (M(w) = 97.8 kD and M(n) = 41.5 kD) was dissolved in chloroform and subsequently transformed into beads with a diameter in the micrometer range, using a solvent evaporation technique. The resulting microbeads were characterized by different techniques, including NMR spectroscopy, differential scanning calorimetry, gel permeation chromatography, and scanning electron microscopy. The latter technique was used as the basis for statistical analysis of the bead size. Typically, an average diameter of 96 microm and a standard deviation of 21 microm were obtained. The beads were also subjected to some preliminary tests regarding cytotoxicity. The copolymer of MMA and 1 contains covalently bound iodine. Therefore, the material is intrinsically radiopaque, i.e., capable of absorbing X-radiation while no contrast additive is needed. Our interest in these microspheres stems primarily from their possible utility as injectable and afterward traceable (radiopaque) bulking agents, e.g., for use in urology for the treatment of female stress incontinence due to sphincter deficiency. As a first test into this direction, a sample of the microbeads was mixed with ethylene glycol, and the resulting suspension was studied with respect to injectability and radiopacity. The results suggest that the radiopaque microbeads may provide access to improved bulking agents. Further modification of the surface may be necessary in order to suppress the migratory aptitude of the radiopaque polymeric microspheres in vivo.     

Micropatterning tractional forces in living cells

Here we describe a method for quantifying traction in cells that are physically constrained within micron-sized adhesive islands of defined shape and size on the surface of flexible polyacrylamide gels that contain fluorescent microbeads (0.2-microm diameter). Smooth muscle cells were plated onto square (50 x 50 microm) or circular (25- or 50-microm diameter) adhesive islands that were created on the surface of the gels by applying a collagen coating through microengineered holes in an elastomeric membrane that was later removed. Adherent cells spread to take on the size and shape of the islands and cell tractions were quantitated by mapping displacement fields of the fluorescent microbeads within the gel. Cells on round islands did not exhibit any preferential direction of force application, but they exerted their strongest traction at sites where they formed protrusions. When cells were confined to squares, traction was highest in the corners both in the absence and presence of the contractile agonist, histamine, and cell protrusions were also observed in these regions. Quantitation of the mean traction exerted by cells cultured on the different islands revealed that cell tension increased as cell spreading was promoted. These results provide a mechanical basis for past studies that demonstrated a similar correlation between spreading and growth within various anchorage-dependent cells. This new approach for analyzing the spatial distribution of mechanical forces beneath individual cells that are experimentally constrained to defined sizes and shapes may provide additional insight into the biophysical basis of cell regulation.     

A Novel Method for Localizing Reporter Fluorescent Beads Near the Cell Culture Surface for Traction Force Microscopy

PA gels have long been used as a platform to study cell traction forces due to ease of fabrication and the ability to tune their elastic properties. When the substrate is coated with an extracellular matrix protein, cells adhere to the gel and apply forces, causing the gel to deform. The deformation depends on the cell traction and the elastic properties of the gel. If the deformation field of the surface is known, surface traction can be calculated using elasticity theory. Gel deformation is commonly measured by embedding fluorescent marker beads uniformly into the gel. The probes displace as the gel deforms. The probes near the surface of the gel are tracked. The displacements reported by these probes are considered as surface displacements. Their depths from the surface are ignored. This assumption introduces error in traction force evaluations. For precise measurement of cell forces, it is critical for the location of the beads to be known. We have developed a technique that utilizes simple chemistry to confine fluorescent marker beads, 0.1 and 1 µm in diameter, in PA gels, within 1.6 μm of the surface. We coat a coverslip with poly-D-lysine (PDL) and fluorescent beads. PA gel solution is then sandwiched between the coverslip and an adherent surface. The fluorescent beads transfer to the gel solution during curing. After polymerization, the PA gel contains fluorescent beads on a plane close to the gel surface.     

Visualising fouling of a chromatographic matrix using confocal scanning laser microscopy

Confocal scanning laser microscopy (CSLM) was used to visualise the spatial location of foulants during the fouling of Q Sepharose FF matrix in finite batch experiments and for examining the subsequent effectiveness of clean-in-place (CIP) treatments in cleaning the heavily fouled beads. Beads were severely fouled with partially clarified E. coli homogenate by contacting the beads with the foulant for contact times of 5 min, 1 or 12 h. The use of two different fluorescent dyes, PicoGreen and Cy5.5, for labelling genomic PicoGreen-labelled dsDNA and protein respectively, allowed the direct observation of the chromatographic beads. The extent of fouling was assessed by measuring the subsequent adsorption of Cy5.5-labelled BSA to the beads. Control studies established that the labelling of BSA did not affect significantly the protein properties. In the control case of contacting the unfouled matrix with Cy5.5-labelled BSA, protein was able to penetrate the entire matrix volume. After fouling, Cy5.5-labelled BSA was unable to penetrate the bead but only to bind near the bead surface where it slowly displaced PicoGreen-conjugated dsDNA, which bound only at the exterior of the beads. Labelled host cell proteins bound throughout the bead interior but considerably less at the core; suggesting that other species might have occupied that space. The gross levels of fouling achieved drastically reduced the binding capacity and maximum Cy5.5-labelled BSA uptake rate. The capacity of the resin was reduced by 2.5-fold when incubated with foulant for up to 1 h. However, when the resin was fouled for a prolonged time of 12 h a further sixfold decrease in capacity was seen. The uptake rate of Cy5.5-labelled BSA decreased with increased fouling time of the resin. Incubating the fouled beads in 1 M NaCl dissociated PicoGreen-labelled dsDNA from the bead exterior within 15 min of incubation but proved ineffective in removing all the foulant protein. Cy5.5-labelled BSA was still unable to bind beyond the outer region of the beads. A harsher CIP treatment of 1 M NaCl dissolved in 1 M NaOH was also ineffective in removing all the foulant protein but did remove PicoGreen-conjugated dsDNA within 15 min of incubation. Cy5.5-labelled BSA was able to bind throughout the bead interior after this more aggressive CIP treatment but at a lower capacity than in the case of fresh beads. The competitive adsorption of BacLight Red-labelled whole cells or cell debris and PicoGreen-conjugated dsDNA was also visualised using CSLM.     

Rapid, femtomolar bioassays in complex matrices combining microfluidics and magnetoelectronics

A significant challenge for all biosensor systems is to achieve high assay sensitivity and specificity while minimizing sample preparation requirements, operational complexity, and sample-to-answer time. We have achieved multiplexed, unamplified, femtomolar detection of both DNA and proteins in complex matrices (including whole blood, serum, plasma, and milk) in minutes using as few as two reagents by labeling conventional assay schemes with micrometer-scale magnetic beads, and applying fluidic force discrimination (FFD). In FFD assays, analytes captured onto a microarray surface are labeled with microbeads, and a controlled laminar flow is then used to apply microfluidic forces sufficient to preferentially remove only nonspecifically bound bead labels. The density of beads that remain bound is proportional to the analyte concentration and can be determined with either optical counting or magnetoelectronic detection of the magnetic labels. Combining FFD assays with chip-based magnetoelectronic detection enables a simple, potentially handheld, platform capable of both nucleic acid hybridization assays and immunoassays, including orthogonal detection and identification of bacterial and viral pathogens, and therefore suitable for a wide range of biosensing applications.     

Quantum dots versus organic dyes as fluorescent labels

Suitable labels are at the core of Luminescence and fluorescence imaging and sensing. One of the most exciting, yet also controversial, advances in label technology is the emerging development of quantum dots (QDs)--inorganic nanocrystals with unique optical and chemical properties but complicated surface chemistry--as in vitro and in vivo fluorophores. Here we compare and evaluate the differences in physicochemical properties of common fluorescent labels, focusing on traditional organic dyes and QDs. Our aim is to provide a better understanding of the advantages and limitations of both classes of chromophores, to facilitate label choice and to address future challenges in the rational design and manipulation of QD labels.