Molecular genetic analysis of bacteriophage P22 gene 3 product, a protein involved in the initiation of headful DNA packaging.

Bacteriophage P22 DNA packaging events occur in processive series on concatemeric phage DNA molecules. At the point where such series initiate, the DNA is recognized at a site called pac, and most molecular left ends are generated within six short regions called end sites, which are present in a 120 base-pair region surrounding the pac site. The bacteriophage P22 genes 2 and 3 proteins are required for successful generation of these ends and DNA packaging during progeny virion assembly. Mutants lacking the 162-amino-acid gene 3 protein replicate DNA and assemble functional procapsids. In this report we describe the nucleotide changes and DNA packaging phenotypes of a number of missense mutations of gene 3, which give the phage a higher than normal frequency of generalized transduction. In cells infected by these mutants, more packaging events initiate on the host chromosome than in wild-type infections, so the mutations are thought to affect the specificity of packaging initiation. In addition to having this phenotype, these mutations affect the process of phage DNA packaging in detectable ways. They may: (1) alter the target site specificity for packaging; (2) make target site recognition more promiscuous; (3) affect end site utilization; (4) alter the pac site; and (5) cause apparent random DNA packaging series initiation on phage DNA.     

Analysis in vivo of the bacteriophage P22 headful nuclease

Bacteriophage P22 packages its double-stranded DNA chromosomes from concatemeric replicating DNA in a processive, sequential fashion. According to this model, during the initial packaging event in such a series the packaging apparatus recognizes a nucleotide sequence, called pac, on the DNA, and then condenses DNA within the coat protein shell unidirectionally (rightward) from that point. DNA ends are generated near the pac site before or during the condensation reaction. The right end of the mature chromosome is created by a cut made in the DNA by the "headful nuclease" after a complete chromosome is condensed within the phage head. Subsequent packaging events on that concatemeric DNA begin at the end generated by the headful cut of the previous event and proceed in the same direction as the previous event. We report here accurate measurements of the P22 chromosome length (43,400( +/- 750) base-pairs, where the uncertainty is the range in observed lengths), genome length (41,830( +/- 315) base-pairs, where the uncertainty represents the accuracy with which the length is known), the terminal redundancy (1600( +/- 750) base-pairs or 3.8( +/- 1.8)%, where the uncertainty is the observed range) and the imprecision in the headful measuring device ( +/- 750 base-pairs or +/- 1.7%). In addition, we present evidence for a weak nucleotide sequence specificity in the headful nuclease. These findings lend further support to, and extend our understanding of, the sequential series model of P22 DNA packaging.     

The DNA site utilized by bacteriophage P22 for initiation of DNA packaging

Virion proteins recognize their cognate nucleic acid for encapsidation into virions through recognition of a specific nucleotide sequence contained within that nucleic acid. Viruses like bacteriophage P22, which have partially circularly permuted, double-stranded virion DNAs, encapsidate DNA through processive series of packaging events in which DNA is recognized for packaging only once at the beginning of the series. Thus a single DNA recognition event programmes the encapsidation of multiple virion chromosomes. The protein product of P22 gene 3, a terminase component, is thought to be responsible for this recognition. The site on the P22 genome that is recognized by the gene 3 protein to initiate packaging series is called the pac site. We report here a strategy for assaying pac site activity in vivo, and the utilization of this system to identify and characterize the site genetically. It is an asymmetric site that spans 22 basepairs and is located near the centre of P22 gene 3.     

Initiation of bacteriophage P22 DNA packaging series. Analysis of a mutant that alters the DNA target specificity of the packaging apparatus

Bacteriophage P22 is thought to package its double-stranded DNA chromosome from concatemeric replicating DNA in a "processive" sequential fashion. According to this model, during the initial packaging event in such a series the packaging apparatus recognizes a nucleotide sequence, called pac, on the DNA, and then condenses DNA within the coat protein shell unidirectionally from that point. DNA ends are generated near the pac site before or during the condensation reaction. The opposite end of the mature chromosome is created by a cut made in the DNA after a complete chromosome is condensed within the phage head. Subsequent packaging events on that concatemeric DNA begin at the end generated by the headful cut of the previous event and proceed in the same direction as the previous event. We report here the identification of a consensus nucleotide sequence for the pac site, and present evidence that supports the idea that the gene 3 protein is a central participant in this recognition event. In addition, we tentatively locate the portion of the gene 3 protein that contacts the pac site during the initiation of packaging.     

Herpes Simplex Virus DNA Packaging without Measurable DNA Synthesis

Herpes simplex virus (HSV) type 1 DNA synthesis and packaging occur within the nuclei of infected cells; however, the extent to which the two processes are coupled remains unclear. Correct packaging is thought to be dependent upon DNA debranching or other repair processes, and such events commonly involve new DNA synthesis. Furthermore, the HSV UL15 gene product, essential for packaging, nevertheless localizes to sites of active DNA replication and may link the two events. It has previously been difficult to determine whether packaging requires concomitant DNA synthesis due to the complexity of these processes and of the viral life cycle; however, we have recently described a model system which simplifies the study of HSV assembly. Cells infected with HSV strain tsProt.A accumulate unpackaged capsids at the nonpermissive temperature of 39°C. Following release of the temperature block, these capsids proceed to package viral DNA in a single, synchronous wave. Here we report that, when DNA replication was inhibited prior to release of the temperature block, DNA packaging and later events in viral assembly nevertheless occurred at near-normal levels. We conclude that, under our conditions, HSV DNA packaging does not require detectable levels of DNA synthesis.     

Cosmid DNA packaging in vivo

The packaging of cosmid DNA into phage particles during phage lambda growth is described. Evidence is presented supporting the work of others that cosmid transducing phages contain linear multimers of cosmid DNA in which the number of cosmid copies is that required to make a packagable DNA length (greater than 0.77 of the lambda DNA length). The yield of cosmid transducing phages declines sharply as the number of cosmid copies required to make a packagable DNA length increases. The cosmid DNA replication that produces the packaging substrate shares with lambda rolling-circle replication a dependence on the lambda gam gene product.     

The Estimation of the Number and the Length Distribution of Gene Conversion Tracts from Population DNA Sequence Data

DNA sequence variation studies report the transfer of small segments of DNA among different sequences caused by gene conversion events. Here, we provide an algorithm to detect gene conversion tracts and a statistical model to estimate the number and the length distribution of conversion tracts for population DNA sequence data. Two length distributions are defined in the model: (1) that of the observed tract lengths and (2) that of the true tract lengths. If the latter follows a geometric distribution, the relationship between both distributions depends on two basic parameters: ψ, which measures the probability of detecting a converted site, and , the parameter of the geometric distribution, from which the average true tract length, 1/(1 - ), can be estimated. Expressions are provided for estimating by the method of the moments and that of the maximum likelihood. The robustness of the model is examined by computer simulation. The present methods have been applied to the published rp49 sequences of Drosophila subobscura. Maximum likelihood estimate of for this data set is 0.9918, which represents an average conversion tract length of 122 bp. Only a small percentage of extant conversion events is detected.     

Requirement for double-strand breaks but not for specific DNA sequences in herpes simplex virus type 1 genome isomerization events.

Herpes simplex virus type 1 (HSV-1) genome isomerization occurs as a result of DNA replication-mediated homologous recombination between several sets of inverted repeat sequences present in the viral DNA. The frequency with which this recombination occurs has been demonstrated to be dependent upon DNA homology length rather than specific sequences. However, the smallest of the viral inverted repeats, the alpha sequence, has been shown to function as a recombinational hot spot, leading to speculation that this sequence may represent a specific element through which genome isomerization is mediated. To investigate this apparent paradox, a quantitative transient recombination assay system was developed and used to examine the recombinogenic properties of a panel of alpha sequence mutants. This analysis revealed that the presence of both the pac1 and pac2 elements was both necessary and sufficient for the induction of high-frequency recombination events by the alpha sequence. However, it was the double-strand break promoted by pac1 and pac2 during cleavage and packaging at the alpha sequence, and not the DNA sequences of the elements themselves, which appeared to be critical for recombination. This was illustrated (i) by the inability of the same pac1 and pac2 sequences to mediate inversion events in cells infected with an HSV-1 mutant which was competent for DNA replication-dependent recombination but defective for the cleavage and packaging process and (ii) by the ability of double-strand breaks generated in non-HSV-1 DNA by an in vivo-expressed restriction endonuclease to significantly stimulate the initiation of recombination events in virus-infected cells. Thus, the alpha sequence appears to act as a hot spot for homologous recombination simply because it happens to coincide with the site of the double-strand break which is generated during the cleavage and packaging process, not because it contains discrete sequences which are required for this activity. However, it was found that this enhanced recombinogenicity disappeared when the element was flanked by regions of extensive sequence homology, particularly that of the large inverted repeats which flank the alpha sequence at its natural site in the HSV-1 genome. These findings are consistent with a model for HSV-1 genome isomerization in which recombination is initiated primarily by multiple random double-strand breaks which arise during DNA replication across the inverted repeats of the genome, rather than by a single specific break which occurs at the alpha sequence during the cleavage and packaging process.     

Initial cos cleavage of bacteriophage lambda concatemers requires proheads and gpFI in vivo

The development of bacteriophage lambda and double-stranded DNA viruses in general involves the convergence of two separate pathways: DNA replication and head assembly. Clearly, packaging will proceed only if an empty capsid shell, the prohead, is present to receive the DNA, but genetic evidence suggests that proheads play another role in the packaging process. For example, lambda phages with an amber mutation in any head gene or in FI, the gene encoding the accessory packaging protein gpFI, are able to produce normal amounts of DNA concatemers but they are not cut, or matured, into unit length chromosomes for packaging. Similar observations have been made for herpes simplex 1 virus. In the case of lambda, a negative model proposes that in the amber phages, unassembled capsid components are inhibitory to maturation, and a positive model suggests that assembled proheads are required for cutting. We tested the negative model by using a deletion mutant devoid of all prohead genes and FI in an in vivo cos cleavage assay; in this deleted phage, the cohesive ends were not cut. When lambda proheads and gpFI were provided in vivo via a second prophage, cutting was restored, and gpFI was required, results that support the positive model. Phage 21 is a sister phage of lambda, and although its capsid proteins share approximately 60% residue identity with lambda's, phage 21 proheads did not restore cutting, even when provided with the accessory protein gpFI. Models for the role of proheads and gpFI in cos cutting are discussed.     

Measurements of single DNA molecule packaging dynamics in bacteriophage lambda reveal high forces, high motor processivity, and capsid transformations

Molecular motors drive genome packaging into preformed procapsids in many double-stranded (ds)DNA viruses. Here, we present optical tweezers measurements of single DNA molecule packaging in bacteriophage lambda. DNA-gpA-gpNu1 complexes were assembled with recombinant gpA and gpNu1 proteins and tethered to microspheres, and procapsids were attached to separate microspheres. DNA binding and initiation of packaging were observed within a few seconds of bringing these microspheres into proximity in the presence of ATP. The motor was observed to generate greater than 50 picoNewtons (pN) of force, in the same range as observed with bacteriophage phi29, suggesting that high force generation is a common property of viral packaging motors. However, at low capsid filling the packaging rate averaged approximately 600 bp/s, which is 3.5-fold higher than phi29, and the motor processivity was also threefold higher, with less than one slip per genome length translocated. The packaging rate slowed significantly with increasing capsid filling, indicating a buildup of internal force reaching 14 pN at 86% packaging, in good agreement with the force driving DNA ejection measured in osmotic pressure experiments and calculated theoretically. Taken together, these experiments show that the internal force that builds during packaging is largely available to drive subsequent DNA ejection. In addition, we observed an 80 bp/s dip in the average packaging rate at 30% packaging, suggesting that procapsid expansion occurs at this point following the buildup of an average of 4 pN of internal force. In experiments with a DNA construct longer than the wild-type genome, a sudden acceleration in packaging rate was observed above 90% packaging, and much greater than 100% of the genome length was translocated, suggesting that internal force can rupture the immature procapsid, which lacks an accessory protein (gpD).     

Gene 18 protein of bacteriophage T7. Overproduction, purification, and characterization

Genetic and physical analyses indicate that gene 18 protein of bacteriophage T7 is essential for packaging of T7 DNA. T7 DNA is replicated via linear intermediates, culminating in the formation of concatemers many genomes in length which are then packaged into capsids. In infections with phage carrying amber mutations in gene 18, development is blocked at the concatemer stage. Biochemical studies on the role of gene 18 protein in concatemer processing and DNA packaging have been hampered by its low level of expression of gene 18 during T7 infections. We have cloned gene 18 on a plasmid downstream from the bacteriophage lambda PL promoter controlled by the temperature-sensitive lambda repressor encoded by c 1857. Thermal induction leads to the expression of the 10,000-Da gene 18 protein to the extent of approximately 10% of the total protein after 2 h. The overexpressed gene 18 protein is susceptible to proteolytic degradation, a condition that can be alleviated by expression in an Escherichia coli strain carrying the lon100 deletion which reduces production of protease La. Extracts of induced cells will complement an extract of T7-infected cells lacking gene 18 protein for packaging of exogenous T7 DNA. The assay has been used to monitor the purification of gene 18 protein to essential homogeneity. The identity of the purified protein has been confirmed by sequencing of the N terminus. Gel filtration analysis suggests that the native protein is an octomer. Treatment of gene 18 protein with 3 M guanidine hydrochloride denatures it to a monomer. Removal of the denaturing agent by dialysis regenerates the octomeric structure and the ability to complement packaging extracts.     

The role of DNA twist in the packaging of viral genomes

We performed molecular dynamics simulations of the genome packaging of bacteriophage P4 using two coarse-grained models of DNA. The first model, 1DNA6 (one pseudo-atom per six DNA basepairs), represents DNA as a string of beads, for which DNA torsions are undefined. The second model, 3DNA6 (three pseudo-atoms per six DNA basepairs), represents DNA as a series of base planes with torsions defined by the angles between successive planes. Bacteriophage P4 was packaged with 1DNA6, 3DNA6 in a torsionally relaxed state, and 3DNA6 in a torsionally strained state. We observed good agreement between the packed conformation of 1DNA6 and the packed conformations of 3DNA6. The free energies of packaging were in agreement, as well. Our results suggest that DNA torsions can be omitted from coarse-grained bacteriophage packaging simulations without significantly altering the DNA conformations or free energies of packaging that the simulations predict.     

Quantum yield for preferential photodimerization in long pyrimidine tracts.

The quantum yield for cyclobutyl-pyrimidine dimerization in DNA has been observed to increase approximately linearly with increasing pyrimidine tract length. A model without adjustable parameters for this yield is proposed based on energy delocalization, vibronic symmetry switching, and saturation statistics that describe the average number of (base pairwise) breathing modes in a given tract of pyrimidines. This average number of modes is an approximately linear function of the tract length. Monte Carlo techniques are used to simulate base sequences and photochemical events, and indicate that this model is consistent with experiment for Tetrahymena pyriformis DNA.     

Close encounters of the RNF8th kind: when chromatin meets DNA repair

Cells counteract the adverse effects of chromosome breakage by activating the DNA damage response (DDR), which entails a coordinated series of events that regulate cell cycle progression and repair of DNA lesions. The packaging of genomic DNA into condensed, often inaccessible chromatin severely complicates efficient DNA damage repair in living cells. Recent studies implicate a large number of chromatin-modifying enzymes in the DDR, suggesting a stepwise model in which chromatin is continually reconfigured to accommodate the association and action of repair factors during the different stages of the DDR. Emerging evidence suggests that the histone ubiquitin ligases RNF8/RNF168 act in concert with ATP-dependent chromatin remodelling enzymes to orchestrate the signalling and repair of DNA lesions in specific chromatin topologies.     

Formation of the right before the left mature DNA end during packaging-cleavage of bacteriophage T7 DNA concatemers.

During bacteriophage T7 morphogenesis in a T7-infected cell, mature length T7 DNA molecules join end-to-end to form concatemers that are subsequently both packaged in the T7 capsid and cut to mature size. In the present study, the kinetics of the appearance in vivo of the mature right and left T7 DNA ends have been analyzed. To perform this analysis, the intercalating dye proflavine is used to interrupt DNA packaging. When used at 0.5 to 8.0 micrograms/ml, proflavine progressively inhibits events in the T7 DNA packaging pathway, without either altering protein synthesis or degrading intracellular T7 DNA. Restriction endonuclease kinetic analysis reveals that proflavine (8 micrograms/ml) completely blocks formation of the mature T7 DNA left end, but only partially blocks formation of the mature T7 DNA right end. Both these and other observations are explained by the hypothesis that, in the T7 DNA packaging pathway, events occur in the following sequence: (1) formation of a mature right end; (2) packaging of at least some of the genome; (3) formation of the mature left end.     

Study of herpes simplex virus maturation during a synchronous wave of assembly.

Production of an infectious herpes simplex virus (HSV) particle requires sequential progression of maturing virions through a series of complex assembly events. Capsids must be constructed in the nucleus, packaged with the viral genome, and transported to the nuclear periphery. They then bud into the nuclear membrane to acquire an envelope, traffic through the cytoplasm, and are released from the cell. Most of these phenomena are very poorly defined, and no suitable model system has previously been available to facilitate molecular analyses of genomic DNA packaging, capsid envelopment, and intracellular virion trafficking. We report the development of such an assay system for HSV type 1 (HSV-1). Using a reversible temperature-sensitive mutation in capsid assembly, we have developed conditions in which an accumulated population of immature capsids can be rapidly, efficiently, and synchronously chased to maturity. By assaying synchronized scaffold cleavage, DNA packaging, and acquisition of infectivity, we have demonstrated the kinetics with which these events occur. Kinetic and morphological features of intranuclear and extranuclear virion trafficking have similarly been examined by indirect immunofluorescence microscopy and electron microscopy. This system should prove a generally useful tool for the molecular dissection of many late events in HSV-1 biogenesis.     

Structure and inherent properties of the bacteriophage lambda head shell. VI. DNA-packaging-defective mutants in the major capsid protein

Some amino acid substitutions in the major capsid protein (gene E product) of lambda phage are found to cause a defect in DNA packaging. These substitutions permit initiation of DNA packaging and expansion of the prohead. However, cleavage of the concatemer DNA at the cos site takes place only to a very small extent, and the capsid eventually becomes empty. Interestingly, the mutations are suppressed by a decrease of the DNA length between the cos sites by 8000 to 10,000 bases. These properties are similar to those of amber mutants in gene D, which codes for the capsid outer-surface protein. Studies on the E missense.D amber double mutant show that the E protein and the D protein contribute additively to the stabilization of the condensed form of the DNA molecule in phage heads.     

Control of adenovirus packaging

The results of studies of Adenovirus have contributed to our basic understanding of the molecular biology of the cell. While a great body of knowledge has been developed concerning Ad gene expression, viral replication, and effects on the infected host, the molecular details of the assembly process of Adenovirus particles are largely unknown. In this article, we would like to propose a theoretical model for the packaging and assembly of Adenovirus and present an overview of the studies that have contributed to our present understanding. In particular, we will summarize the molecular details of the process for packaging of viral DNA into virus particles and highlight the events in packaging and assembly that require further study.     

Sites and gene products involved in lambdoid phage DNA packaging.

21 is a temperate lambdoid coliphage, and the genes that encode the head proteins of lambda and 21 are descended from a common ancestral bacteriophage. The sequencing of terminase genes 1 and 2 of 21 was completed, along with that of a segment at the right end of 21 DNA that includes the R4 sequence. The R4 sequence, a site that is likely involved in termination of DNA packaging, was found to be very similar to the R4 sequences of lambda and phi 80, suggesting that R4 is a recognition site that is not phage specific. DNA packaging by 21 is dependent on a host protein, integration host factor. A series of mutations in gene 1 (her mutations), which allow integration host factor-independent DNA packaging by 21, were found to be missense changes that affect predicted alpha-helixes in gp1. gp2, the large terminase subunit, is predicted to contain an ATP-binding domain and, perhaps, a second domain important for the cos-cutting activity of terminase. orf1, an open reading frame analogous in position to FI, a lambda gene involved in DNA packaging, shares some sequence identity with FI. orf1 was inactivated with nonsense and insertion mutations; these mutations were found not to affect phage growth. 21 was also not able to complement a lambda FI mutant.