Purification and physicochemical properties of polygalacturonase from Aspergillus niger MTCC 3323

Polygalacturonases are the pectinolytic enzymes that catalyze the hydrolytic cleavage of the polygalacturonic acid chain. In the present study, polygalacturonase from Aspergillus niger (MTCC 3323) was purified. The enzyme precipitated with 60% ethanol resulted in 1.68-fold purification. The enzyme was purified to 6.52-fold by Sephacryl S-200 gel-filtration chromatography. On SDS–PAGE analysis, enzyme was found to be a heterodimer of 34 and 69 kDa subunit. Homogeneity of the enzyme was checked by NATIVE-PAGE and its molecular weight was found to be 106 kDa. The purified enzyme showed maximum activity in the presence of polygalacturonic acid at temperature of 45 °C, pH of 4.8, reaction time of 15 min. The enzyme was stable within the pH range of 4.0–5.5 for 1 h. At 4 °C it retained 50% activity after 108 h but at room temperature it lost its 50% activity after 3 h. The addition of Mn²⁺, K⁺, Zn²⁺, Ca²⁺ and Al³⁺ inhibited the enzyme activity; it increased in the presence of Mg²⁺ and Cu²⁺ ions. Enzyme activity was increased on increasing the substrate concentration from 0.1% to 0.5%. The K_m and V_max values of the enzyme were found to be 0.083 mg/ml and 18.21 μmol/ml/min. The enzyme was used for guava juice extraction and clarification. The recovery of juice of enzymatically treated pulp increased from 6% to 23%. Addition of purified enzyme increased the %T₆₅₀ from 2.5 to 20.4 and °Brix from 1.9 to 4.8. The pH of the enzyme treated juice decreased from 4.5 to 3.02.     

Demineralization of crab shell waste by Pseudomonas aeruginosa F722

Crab shell (CS) waste samples (particle size 3–10 and 20–35 mm) were inoculated with the newly isolated Pseudomonas aeruginosa F722 to study the efficiency of microbial demineralization (DM) and deproteinization (DP) in the process of extracting chitin. The inoculated waste was incubated for 7 days at 25, 30 and 35 °C. Various concentrations of glucose were supplemented as carbon source. At the optimal temperature of 30 °C, DM was 92% and DP was 63% DP, whereas the pH dropped from initial pH 8.0 to 4.1. In comparative experiments with different amounts of CS waste, 5% CS waste treatment was shown to be the optimal amount for efficient DM. A positive relationship is correlated between DM and glucose concentration (r² = 0.821), whereas a negative relationship is correlated between DM and pH (r² = 0.793). DP and protease activity were little affected by different crab shell sizes.     

Structural characterization of thermostable,solvent tolerant,cytosafe tannase from Bacillus subtilis PAB2

Tannase production by Bacillus subtilis PAB2, was investigated under solid state fermentation using tamarind seed as sole carbon source and it was found as the highest titer (73.44 U/gds). The enzyme was purified to homogeneity, which showed the molecular mass around 52 kDa (K_m = 0.445 mM, V_max = 125.8 mM/mg/min and K_cat = 2.88 min^–1). The enzyme was found stable in a range of pH (3.0–8.0) and temperature (30–70 °C) with an optimal activity at pH 5.0, pI of 4.4 and at 40 °C temperature. It exhibited half-life (t_1/2) of 4.5 h at 60 °C. The enzyme comprised a typical secondary structure containing α-helix (9.3%), β-pleated sheet (33.6%) and β-turn (17.2%). The native conformation of the enzyme was alike a 44 nm spherical nanoparticle upon aggregation. Thermodynamic parameters of tannase revealed that it was stable at 40 °C and showed Q₁₀, ΔG_d and ΔS_d values of 2.08, 99.37 KJ/mol and 252.38 J mol⁻¹ K⁻¹, respectively. Organic solvents were stimulatory with regard to enzyme activity. Moreover, the altered enzyme activity was determined to be correlated with the changes in structural conformation in presence of inducer and inhibitor. Tannase was explored to have no cytotoxicity on Vero cell line as well as rat model study.     

Effect of enzymatic and hydrothermal treatments of rapeseeds on quality of the pressed rapeseed oils: part II. Oil yield and oxidative stability

Response surface methodology was used to evaluate the quantitative effects of three independent variables: rapeseed moisture content (MC), enzymes dosage (ED) and conditioning temperature (T) on rapeseed oil yield (OY), efficiency of pressing (EP), and oxidative stability (OS). The highest OY (16.4%) and EP (42.8%) were obtained from pectolytic enzyme (0.1%) treated seeds (MC = 9%, T = 90 °C). The highest OS (12.6 h) was found for oil pressed from rapeseeds heated at 120 °C (MC = 11%), after the cellulolytic enzyme treatment. Results of OY, EP and OS determinations correlate with the predicted values calculated from the partial cubic models (PCMs) equations (R² = 0.9995, 0.9994, 0.9974 for the cellulolytic enzyme-treated oils and 0.9900, 0.9900, 0.9990 for the pectolytic enzyme-treated oils). The predicted optimum MC = 9.5% and 8.6%, ED = 0.06% and 0.1%, T = 91.2 °C and 90.1 °C resulted in OY = 15.5% and 16.5%, EP = 40.4% and 43.0% for rapeseed oils from seeds treated with cellulolytic and pectolytic enzymes. OS values (12.6 h and 11.8 h) at the optimum conditions of MC = 11.0% and 10.1%, ED = 0.04% and 0.08%, T = 120.0 °C and 119.9 °C for the cellulolytic and pectolytic enzyme-treated oils were also calculated using PCM. Moreover, scanning electron microscopy revealed structural changes in the rapeseed after enzymatic treatment.     

Characterization of functionally active immobilized carbonic anhydrase purified from sheep blood lysates

Carbonic anhydrase (CA) catalyzes the reversible reaction of hydration of CO₂ to bicarbonate and the dehydration of bicarbonate back to CO₂. Sequestration of CO₂ from industrial processes or breathing air may require a large amount of highly active and stable CA. Therefore, the objectives of the present study were to purify large amounts of CA from a cheap and easily accessible source of the enzyme and to characterize the enzymatic and kinetic properties of soluble and immobilized enzyme. We recovered 80% of pure enzyme with a specific activity of 4870 EU/mg protein in a single step using sheep blood lysates from slaughter house waste products and CA specific inhibitor affinity chromatography. Since affinity pure CA showed both anhydrase and esterase activities, we measured the esterase activities for enzymology. The Michaelis–Menten constant, K_M, pH optimum, activation energy, and thermal stability of soluble enzymes were 8 × 10^?2 M, 7.3 pH, 7.3 kcal/mol and 70 °C, respectively.The immobilization of the enzyme to Affigel-10 was very efficient and 83% of purified enzyme was immobilized. The immobilized enzyme showed a K_M of 5 × 10^?2 M and activation energy of 8.9 kcal/mol, suggesting a better preference of substrate for immobilized enzyme in comparison to soluble enzyme. In contrast to soluble enzyme, immobilized enzyme showed relatively higher activity at pH 6–8. From these results, we concluded that a shift in pH profile toward acidic pH is due to modification of lysine residues involved in the immobilization process. The immobilized enzyme was stable at higher temperatures and showed highest activity at 80 °C. The activity of immobilized enzyme in a flow reactor at 0.5–2.2 ml/min flow rate was unaffected. Collectively, results from the present study suggested the application of blood lysate waste from animal slaughterhouses for purification of homogeneous enzyme for CO₂ capture in a flow reactor.     

Purification and characterization of a thermostable α-galactosidase with transglycosylation activity from Aspergillus parasiticus MTCC-2796

An extracellular thermostable α-galactosidase from Aspergillus parasiticus MTCC-2796 was purified 16.59-fold by precipitation with acetone, followed by sequential column chromatography with DEAE-Sephadex A-50 and Sephadex G-100. The purified enzyme was homogeneous on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). It was found to be a monomeric protein with a molecular weight of about 67.5 kDa. The purified enzyme showed optimum activity against o-nitrophenyl-α-d-galactopyranoside (oNPG) at pH 5.0 and a temperature of 50 °C. The enzyme was thermostable, showing complete activity even after heating at 65 °C for 30 min. The enzyme showed strict substrate specificity for α-galactosides and hydrolyzed oNPG (K_m = 0.83 mM), melibiose (K_m = 2.48 mM) and raffinose (K_m = 5.83 mM). Among metal ions and reagents tested, Ca²⁺ and K⁺ enhanced the enzymatic activity, but Mg²⁺, Mn²⁺, ethylenediaminetetraacetic acid (EDTA) and 2-mercaptoethanol showed no effect, while Ag⁺, Hg²⁺ and Co²⁺ strongly inhibited the activity of the enzyme. The enzyme catalyzed the transglycosylation reaction for the synthesis of melibiose.     

A concise synthesis and evaluation of new malonamide derivatives as potential α-glucosidase inhibitors

A series of new malonamide derivatives were synthesized by Michael addition reaction of N¹,N³-di(pyridin-2-yl)malonamide into α,β-unsaturated ketones mediated by DBU in DCM at ambient temperature. The inhibitory potential of these compounds in vitro, against α-glucosidase enzyme was evaluated. Result showed that most of malonamide derivatives were identified as a potent inhibitors of α-glucosidase enzyme. Among all the compounds, 4K (IC₅₀ = 11.7 ± 0.5 μM) was found out as the most active one compared to standard drug acarbose (IC₅₀ = 840 ± 1.73 μM). Further cytotoxicity of 4a–4m were also evaluated against a number of cancer and normal cell lines and interesting results were obtained.     

Structures,magnetic properties,and XPS of cyanide-bridged NdIII/SmIII/GdIII–CrIII complexes

Synthesis, structural characterization, and spectroscopic and magnetic properties of three new cyano-bridged 3d–4f bimetallic complexes, Ln^III(DMF)₄(H₂O)₃Cr^III (CN)₆ · nH₂O (Ln = Nd, Sm, Gd), have been described. The Nd–Cr complex crystallizes in the monoclinic P2₁/n space group with the following unit cell parameters: a = 20.063(7) Å, b = 8.967(4) Å, c = 18.023(6) Å, b = 96.12(3)°, V = 3224(2) Å³, and Z = 4. The neodymium (III) ion, which adopts anti-prism eight-coordination environment, is linked to the [Cr^III(CN)₆]³⁻ moiety through a bridging cyanide ligand with Nd–N = 2.550(4) Å and Nd–N–C = 164.4(4)°. The variable-temperature (0.5 T at 2–300 K) and variable-field (0–5 T at 2 and 5 K) magnetic measurements reveal that the weak interaction of Gd–Cr complexes differs from that of Nd–Cr and Sm–Cr ones mainly because of the lack of orbital angular momentum. The XPS and diffuse reflectance electronic spectra were also measured to discuss charge transfer transitions concerning π-backdonation from the viewpoint of magneto-optical functions.     

Purification and characterization of an extracellular cholesterol oxidase from a Bordetella species

A soil-isolated bacterium (strain B4) was identified as a species of Bordetella and deposited with the China General Microbiological Culture Collection (code, CGMCC 2229). The bacterium grew in a mineral medium, on cholesterol as a sole source of carbon and energy. Only one metabolite of cholesterol was accumulated in detectable amounts during the strain growth. It was identified as 4-cholesten-3-one. Cholesterol oxidase (COD) (EC 1.1.3.6), which catalyzes cholesterol into this metabolite, was evidenced from the strain. The conditions of the bacterium growth were optimized for extracellular enzyme production, which then reached around 1700 UL⁻¹ within 24 h culturing. The enzyme was purified from the spent medium of the strain to homogeneity on SDS-PAGE, and characterized. Its molecular mass, as estimated by this technique, was 55 kDa. COD showed an optimum activity at pH 7.0. It was completely stable at pH 5.0 and 4 °C for 48 h, and retained 80% at least of its initial activity at pH 4.0 or at a pH of 6.0–10.0. The optimum temperature for its reaction was 37 °C. The thermal stability of COD was appreciable, as 90% or 80% of its initial activity was recovered after 1 h or 2 h incubation at 50 °C. Ag⁺ or Hg⁺ at 1 mM, was inhibitor of COD activity, while Cu²⁺, at the same concentration, was activator. The COD K_m, determined at 37 °C and pH 7.0, was 0.556 mM. The enzyme was stable at pH 7.0 and 37 °C during 24 h mechanical shaking in the presence of 33% (v/v) of either of the solvents, dimethylsulfoxide, ethyl acetate, butanol, chloroform, benzene, xylene or cyclohexane.     

Molecular design,synthesis and biological evaluation of cyclic imides bearing benzenesulfonamide fragment as potential COX-2 inhibitors. Part 2

A group of cyclic imides (1–10) was designed for evaluation as a selective COX-2 inhibitors and investigated in vivo for their anti-inflammatory activity. Compounds 6a, 6b, 8a, 8b, 9a, 9b, 10a and 10b were proved to be potent COX-2 inhibitors with IC₅₀ range of 0.1–4.0 μM. In vitro COX-1/COX-2 inhibition structure–activity studies identified compound 8a as a highly potent (IC₅₀ = 0.1 μM), and an extremely selective [COX-2 (SI) > 1000] comparable to celecoxib [COX-2 (SI) > 384], COX-2 inhibitor that showed superior anti-inflammatory activity (ED₅₀ = 72.4 mg/kg) relative to diclofenac (ED₅₀ = 114 mg/kg). Molecular modeling was carried out through docking the designed compounds into the COX-2 binding site to predict if these compounds have analogous binding mode to the COX-2 inhibitors. The study showed that the homosulfonamide fragment of 8a inserted deep inside the 2°-pocket of the COX-2 active site, where the SO₂NH₂ group underwent H-bonding interaction with Gln¹⁹²(2.95 Å), Phe⁵¹⁸(2.82 Å) and Arg⁵¹³(2.63 and 2.73 Å). Docking study of the synthesized compound 8a into the active site of COX-2 revealed a similar binding mode to SC-558, a selective COX-2 inhibitor.     

Enzyme-assisted extraction of lycopene from tomato processing waste

A central composite design was used to optimize the enzyme-assisted extraction of lycopene from the peel fraction of tomato processing waste. Tomato skins were pretreated by a food-grade enzyme preparation with pectinolytic and cellulolytic activities and then subjected to hexane extraction. The factors investigated included extraction temperature (10-50 °C), pretreatment time (0.5-6.5 h), extraction time (0.5-4.5 h), enzyme solution-to-solid ratio (10-50 dm3/kg) and enzyme load (0-0.2 kg/kg). Overall, an 8- to 18-fold increase in lycopene recovery was observed compared to the untreated plant material. From a response surface analysis of the data, a second-degree polynomial equation was developed which provided the following optimal extraction conditions: T=30 °C, extraction time=3.18 h and enzyme load=0.16 kg/kg. The obtained results strongly support the idea of using cell-wall degrading enzymes as an effective means for recovering lycopene from tomato waste.     

Purification and characterization of two thermostable protease fractions from Bacillus megaterium

Protease enzyme from Bacillus megaterium was successively purified by ammonium sulfate precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-200. The purification steps of protease resulted in the production of two protease fractions namely protease P1 and P2 with specific activities of 561.27 and 317.23 U mg^?1 of protein, respectively. The molecular weights of B. megaterium P1 and P2 were 28 and 25 KDa, respectively. The purified fractions P1 and P2 were rich in aspartic acid and serine. Relatively higher amounts of alanine, leucine, glycine, valine, thereonine valine and glutamic acid were also present. The maximum protease activities for both enzyme fractions were attained at 50 °C, pH 7.5, 1% of gelatine concentration and 0.5 enzyme concentrations. P1 and P2 fractions were more stable over pH 7.0–8.5 and able to prolong their thermal stability up to 80 °C. The effect of different inhibitors on the protease activity of both enzyme fractions was also studied. The enzyme was found to be serine active as it had been affected by lower concentrations of phenylmethylsulfonyl fluoride (PMSF). Complete dehairing of the enzyme-treated skin was achieved in 12 h, at room temperature.     

Fed-batch culture of recombinant Saccharomyces cerevisiae for glucose 6-phosphate dehydrogenase production

We examined glucose 6-phosphate dehydrogenase (G6PD) production by fed-batch cultivation, using a recombinant strain of Saccharomyces cerevisiae W303-181 overexpressing this enzyme. The cultivations were carried out in a 3 L fermenter at pH 5.7, 30 °C, 2.0 vvm aeration, 200 rpm agitation and an inoculum concentration of 1.0 g/L. The volume of the culture medium in the fed-batch process varied from 1.333 to 2.0 L, due to the addition of 15.0 g/L glucose solution during 5 h. Different feeding rates were studied (exponentially increasing and decreasing feeding rates), and the feeding profile was determined by values of the parameter K (time constant), namely: 0.2, 0.5 and 0.8 h⁻¹. The best enzyme production (847 U/L) was obtained with an exponentially increasing feeding rate and K = 0.2 h⁻¹. The results attained also showed that this process is promising for G6PD production.     

A stable immobilized d-psicose 3-epimerase for the production of d-psicose in the presence of borate

Maximal activity of the immobilized d-psicose 3-epimerase from Agrobacterium tumefaciens on Duolite A568 beads was achieved at pH 9.0 and 55 °C with borate, and at pH 8.5 and 50 °C without borate. The half-lives of the immobilized enzyme at 50 °C with and without borate were increased 4.2- and 128-fold compared to that of the free enzyme without borate, respectively. The immobilized enzyme with borate produced 441 g l^?1 psicose from 700 g l^?1 fructose at pH 9.0 and 55 °C, whereas 193 g l^?1 psicose was produced without borate at pH 8.5 and 50 °C after 120 min in a batch reaction. The immobilized enzyme in a packed-bed bioreactor without borate was produced continuously 325 g l^?1 psicose from 500 g l^?1 fructose at a dilution rate of 1.62 h^?1 over a 236 h period with productivity of 527 g l^?1 h^?1 while that without borate produced 146 g l^?1 psicose at 4.15 h^?1 over a 384-h period with productivity of 606 g l^?1 h^?1. The operational half-lives of the enzyme with and without borate in the bioreactor were 601 and 645 h, respectively. In the present study, psicose was produced stably with high productivity using the immobilized d-psicose 3-epimerase in the presence of borate.     

Optimized synthesis of lipase-catalyzed l-ascorbyl laurate by Novozym® 435

l-Ascorbyl laurate is a fatty acid derivative of l-ascorbic acid which can be widely used as a natural antioxidant in both lipid containing food and cosmetic applications. To avoid any possible harmful effects from chemically synthesized product, the enzymatic synthesis appears to be the best way to satisfy the consumer demand for natural antioxidants. The ability of immobilized lipase from Candida antarctica (Novozym^® 435) to catalyze the direct esterification between l-ascorbic acid and lauric acid was investigated. Response surface methodology (RSM) and 5-level-4-factor central composite rotatable design (CCRD) were employed to evaluate the effects of synthesis parameters, such as reaction time (2–10 h), temperature (25–65 °C), enzyme amount (10–50% w/w of l-ascorbic acid), and substrate molar ratio of l-ascorbic acid to lauric acid (1:1–1:5) on percentage molar conversion to l-ascorbyl laurate. Based on the analysis result of ridge max, the optimal enzymatic synthesis conditions were predicted as follows: reaction time 6.7 h, temperature 30.6 °C, enzyme amount 34.5%, substrate molar ratio 1:4.3; and the optimal actual yield was 93.2%.     

Celecoxib analogs possessing a N-(4-nitrooxybutyl)piperidin-4-yl or N-(4-nitrooxybutyl)-1,2,3,6-tetrahydropyridin-4-yl nitric oxide donor moiety: Synthesis,biological evaluation and nitric oxide release studies

A new group of hybrid nitric oxide (NO) releasing anti-inflammatory (AI) coxib prodrugs (NO-coxibs) wherein the para-tolyl moiety present in celecoxib was replaced by a N-(4-nitrooxybutyl)piperidyl 15a–b, or N-(4-nitrooxybutyl)-1,2,3,6-tetrahydropyridyl 17a–b, NO-donor moiety was synthesized. All compounds released a low amount of NO upon incubation with phosphate buffered saline (PBS) at pH 7.4 (2.4–5.8% range). In comparison, the percentage NO released was higher (3.1–8.4% range) when these nitrate prodrugs were incubated in the presence of l-cysteine. In vitro COX-1/COX-2 isozyme inhibition studies showed this group of compounds are moderately more potent, and hence selective, inhibitors of the COX-2 relative to the COX-1 enzyme. AI structure–activity relationship data acquired showed that compounds having a MeSO₂ COX-2 pharmacophore exhibited superior AI activity compared to analogs having a H₂NSO₂ substituent. Compounds having a MeSO₂ COX-2 pharmacophore in conjunction with a N-(4-nitrooxybutyl)piperidyl (ED₅₀ = 132.4 mg/kg po), or a N-(4-nitrooxybutyl)-1,2,3,6-tetrahydropyridyl (ED₅₀ = 118.4 mg/kg po), moiety exhibited an AI potency profile that is similar to aspirin (ED₅₀ = 128.7 mg/kg po) but lower than ibuprofen (ED₅₀ = 67.4 mg/kg po).     

Kinetic models and process parameters for ultrasound-assisted extraction of water-soluble components and polysaccharides from a medicinal fungus

This study was on the kinetics and process parameters for ultrasound-assisted extraction (UAE) of water-soluble components and polysaccharides (PS) from the dry mycelium of a medicinal fungus, Cordyceps sinensis Cs-HK1. Four process variables (factors) were evaluated at different levels, ultrasound intensity (2.44–44.1 W/cm²), temperature (40–70 °C), solid particle size (156.5–750 μm), and solid-to-liquid ratio (1/30–1/70 g/mL). The experimental data of yields versus time in most cases were fitted closely to two empirical kinetic models for solid–liquid extraction, parabolic diffusion equation (y = y_o + y₁t^1/2) and power law (y = βtⁿ) with high correlation coefficients (R²) of 0.95–0.99 for total extract yield, and 0.90–0.96 for PS yield. The PS yield was increased more significantly than the total extract yield with the ultrasound intensity. Reducing the particle size and increasing the extraction temperature led to a higher yield and extraction rate; increasing the solid-to-liquid ratio (or decreasing the liquid volume) increased the PS yield and extraction rate but had little influence on the total extract. Significant correlations were found between extraction rate (dy/dt) and ultrasound power density (P/V), and between extract yield (y) and energy density (Pt/V). The kinetic and process parameters are useful for rational design and efficient operation of UAE processes.     

Immobilization of Candida rugosa lipase on electrospun cellulose nanofiber membrane

A biocatalyst with high activity retention of lipase was fabricated by the covalent immobilization of Candida rugosa lipase on a cellulose nanofiber membrane. This nanofiber membrane was composed of nonwoven fibers with 200 nm nominal fiber diameter. It was prepared by electrospinning of cellulose acetate (CA) and then modified with alkaline hydrolysis to convert the nanofiber surface into regenerated cellulose (RC). The nanofiber membrane was further oxidized by NaIO₄. Aldehyde groups were simultaneously generated on the nanofiber surface for coupling with lipase. Response surface methodology (RSM) was applied to model and optimize the modification conditions, namely NaIO₄ content (2–10 mg/mL), reaction time (2–10 h), reaction temperature (25–35 °C) and reaction pH (5.5–6.5). Well-correlating models were established for the residual activity of the immobilized enzyme (R² = 0.9228 and 0.8950). We found an enzymatic activity of 29.6 U/g of the biocatalyst was obtained with optimum operational conditions. The immobilized lipase exhibited significantly higher thermal stability and durability than equivalent free enzyme.     

Operation of a fixed-bed bioreactor in batch and fed-batch modes for production of inulinase by solid-state fermentation

This work is focused on the inulinase production by solid-state fermentation (SSF) in a fixed-bed reactor (34 cm diameter and 50 cm height) with working capacity of 2-kg of dry substrate operated in batch and fed-batch modes. It was investigated different strategies for feeding the inlet air in the bioreactor (saturated and unsaturated air) as alternative to remove the metabolic heat generated during the microbial growth by evaporative cooling. The kinetic evaluation of the process carried out in batch mode using unsaturated air showed that the evaporative cooling decreasing the mean temperature of the solid-bed, although the enzyme production was lower than that obtained using saturated air. Results showed that maximum enzyme activity (586 ± 63 U gds⁻¹) was obtained in the fed-batch mode using saturated air after 24 h of fermentation. The enzymatic extract obtained by fed-batch mode was characterized and presented optimum temperature and pH in the range of 52–57 °C and 4.8–5.2, respectively. For a temperature range from 40 to 70 °C the enzyme presented decimal reduction time, D-value, ranging from 5748 to 47 h, respectively. For a pH range from 3.5 to 5.5 the enzyme showed good stability, presenting D-values higher than 2622 h. In terms of Michaelis–Mentem parameters were demonstrated that the crude inulinase activity presented higher affinity for substrate sucrose compared to inulin.     

Isolation and characterization of ellagitannins as the major polyphenolic components of Longan (Dimocarpus longan Lour) seeds

Longan (Dimocarpus longan Lour, syn. Euphoria longan Lam.) represents an important fruit in Northern Thailand and has significant economic impact. The fruit is either consumed fresh or as commercially prepared dried and canned products. The canning industry in Thailand produces considerable quantities of waste products, in particular Longan seeds. Because these seeds may be an exploitable source of natural phenolic antioxidants, it was of interest to identify, purify and quantitate the major potential antioxidant phenolics contained therein. The polyphenolic fraction from ground Longan seeds was obtained by extraction with methanol after delipidation with hexane. The hexane extract contained predominantly long-chain fatty acids with major contributions from palmitic (35%) and oleic (28%) acids. The polyphenolic fraction (80.90 g/kg dry weight) was dominated by ellagic acid (25.84 g/kg) and the known ellagitannins corilagin (13.31 g/kg), chebulagic acid (13.06 g/kg), ellagic acid 4-O-α-l-arabinofuranoside (9.93 g/kg), isomallotinic acid (8.56 g/kg) and geraniin (5.79 g/kg). Structure elucidation was performed with mass spectrometry and complete assignment of ¹H and ¹³C NMR signals. The methanol extracts exhibited strong antioxidant capacities with an IC₅₀ of 154 μg/ml for reactive oxygen species attack on salicylic acid and 78 μg/ml for inhibition of xanthine oxidase in the hypoxanthine/xanthine oxidase assay. The extracts were less effective in the 2-deoxyguanosine assay (IC₅₀ = 2.46 mg/ml), indicating that gallates along with ellagic acid and its congeners exert their potential antioxidant effects predominantly by precipitation of proteins such as xanthine oxidase. This was confirmed for the pure compounds gallic acid, methyl gallate, ellagic acid and corilagin.