Customised life cycle assessment tool for sugarcane (CaneLCA)—a development in the evaluation of alternative agricultural practices

Purpose

To promote eco-efficient sugarcane products, there is a need for life cycle assessment (LCA) methods that enable rapid assessment of the environmental implications of alternative agricultural practices. In response, a customised LCA method for sugarcane growing was developed and operationalized in the CaneLCA tool. The aim of the paper was to describe the CaneLCA method in detail and to test the effectiveness of the tool’s parameterisation for evaluating the environmental implications of cane growing practice alternatives.

Methods

CaneLCA (Version 1.03) was developed over 6 years (2011–2017) in conjunction with the Australian sugarcane sector. The LCA process was customised for sugarcane growing by focusing on ‘cradle to farm gate’ operations and relevant impact categories, and by parameterising practice variables. To evaluate the effectiveness of the tool, we used it to assess a case study of actual practice changes in the Wet Tropics region of Australia, in terms of the scope of practice variables and environmental implications that can be accounted for.

Results and discussion

The case study results generated by CaneLCA were consistent with those generated by past studies using LCA software. The parameterisation of practice variables allowed for all the practice changes represented in the case study to be assessed. It is suitable for evaluating such known practice alternatives, but less suited to evaluating very innovative practice alternatives, as it is constrained by the underlying algorithms and factors. Most of the environmental implications could be considered, except for effects on soil quality. This will be an area for future tool development to understand the full implications of agricultural practice change, along with the introduction of dynamic models to better estimate emissions.

Conclusions

CaneLCA makes the LCA process more rapid for evaluating alternative sugarcane growing practices, thereby speeding up progress towards devising more eco-efficient sugarcane products. It provides a model that could be adapted for other sugarcane growing regions, and for other perennial cropping systems. The novelty of the method is the detailed parameterisation of practice variables so that a wide range of alternative practices can be evaluated.

     

Life cycle assessment of the environmental performance of conventional and organic methods of open field pepper cultivation system

Purpose

As the scale of the organic cultivation sector keeps increasing, there is growing demand for reliable data on organic agriculture and its effect on the environment. Conventional agriculture uses chemical fertilizers and pesticides, whilst organic cultivation mainly relies on crop rotation and organic fertilizers. The aim of this work is to quantify and compare the environmental sustainability of typical conventional and organic pepper cultivation systems.

Methods

Two open field pepper cultivations, both located in the Anthemountas basin, Northern Greece, are selected as case studies. Life cycle assessment (LCA) is used to quantify the overall environmental footprint and identify particular environmental weaknesses (i.e. unsustainable practices) of each cultivation system. Results are analysed at both midpoint and endpoint levels in order to obtain a comprehensive overview of the environmental sustainability of each system. Attributional LCA (ALCA) is employed to identify emissions associated with the life cycles of the two systems. Results are presented for problem-oriented (midpoint) and damage-oriented (endpoint) approaches, using ReCiPe impact assessment.

Results and discussion

At midpoint level, conventional cultivation exhibits about threefold higher environmental impact on freshwater eutrophication, than organic cultivation. This arises from the extensive use of nitrogen and phosphorus-based fertilizers, with consequent direct emissions to the environment. The remaining impact categories are mainly affected by irrigation, with associated indirect emissions linked to electricity production. At endpoint level, the main hotspots identified for conventional cultivation are irrigation and fertilizing, due to intensive use of chemical fertilizers and (to a lesser degree) pesticides. For organic pepper cultivation, the main environmental hotspots are irrigation, machinery use, and manure loading and spreading processes. Of these, the highest score for irrigation derives from the heavy electricity consumption required for groundwater pumping associated with the fossil-fuel-dependent Greek electricity mix.

Conclusions

Organic and conventional cultivation systems have similar total environmental impacts per unit of product, with organic cultivation achieving lower environmental impacts in ‘freshwater eutrophication’, ‘climate change’, ‘terrestrial acidification’ and ‘marine eutrophication’ categories. Conventional cultivation has a significantly greater effect on the freshwater eutrophication impact category, due to phosphate emissions arising from application of chemical fertilizers.

     

Inclusion of uncertainty in the LCA comparison of different cherry tomato production scenarios

Purpose

Knowledge regarding environmental impacts of agricultural systems is required. Consideration of uncertainty in life cycle assessment (LCA) provides additional scientific information for decision making. The aims of this study were to compare the environmental impacts of different growing cherry tomato cultivation scenarios under Mediterranean conditions and to assess the uncertainty associated to the different agricultural production scenarios.

Materials and methods

The burdens associated to cherry tomato production were calculated and evaluated by the LCA methodology. The functional unit (FU) chosen for this study was the mass unit of 1 t of commercial loose cherry tomatoes. This study included the quantitative uncertainty analysis through Monte Carlo simulation. Three scenarios were considered: greenhouse (GH), screenhouse (SH), and open field (OF). The flows and processes of the product scenario were structured in several sections: structure, auxiliary equipment, fertilizers, crop management, pesticides, and waste management. Six midpoint impact categories were selected for their relevance: climate change, terrestrial acidification, marine eutrophication, metal depletion, and fossil depletion using the impact evaluation method Recipe Midpoint and ecotoxicity using USEtox.

Results and discussion

The structure, auxiliary equipment, and fertilizers produced the largest environmental impacts in cherry tomato production. The greatest impact in these stages was found in the manufacture and drawing of the steel structures, manufacture of perlite, the amount of HDPE plastics used, and the electricity consumed by the irrigation system and the manufacture and application of fertilizers. GH was the cropping scenario with the largest environmental impact in most categories (varying from 18 and 37% higher than SH and OF, respectively, in metal depletion, to 96% higher than SH and OF, in eutrophication). OF showed the highest uncertainty in ecotoxicity, with a bandwidth of 60 CTUe and a probability of 100 and 99.4% to be higher than GH and SH, respectively.

Conclusions

The LCA was used to improve the identification and evaluation of the environmental burdens for cherry tomato production in the Mediterranean area. This study demonstrates the significance of conducting uncertainty analyses for comparative LCAs used in comparative relative product environmental impacts.

     

What causes more LCA research—subjective values,objective problems,or scientific traditions?

Purpose

This paper aims to verify whether life cycle assessment (LCA) research can be mainly treated as a kind of pro-environmental behavior due to public environment concerns, or academic and research activities based on scientific traditions.

Methods

This paper uses the international comparisons method for modeling and SPSS 16.0 for data processing. The data in this study were obtained from the Human Development Report by the United Nations Development Programme and the Web of Science by the Institute for Scientific Information.

Results and discussion

Our empirical study shows that the two main factors influencing the outputs per capita of the research articles in LCA in a particular country are the value of Environmental Performance Index, which represents the overall environmental quality, as well as the outputs per capita of the research articles in environmental science and technology. The results of statistical analysis show two J-type curves: with the change of the independent variables, the dependent variable changes in the same direction, but at a rate that is first slow, then fast.

Conclusions

LCA research results from scientific traditions and can only develop based on fundamental research in environmental science and technology. Further, LCA research is a pro-environmental behavior due to actual and objective effects rather than subjective motives as more research on LCA can accompany, even in some degree may lead to better overall environmental qualities. However, although environmental concerns are likely to affect the number of LCA studies as an implicit variable, this has not been empirically confirmed in our optimization model.

     

A comparative life cycle assessment of the sugarcane value chain in the province of Tucumán (Argentina) considering different technology levels

Purpose

The purpose of this work is to quantify the environmental impact of the sugarcane industry in Tucumán (Argentina) through the life cycle analysis (LCA). The distinctive feature is the consideration of different technology levels (TLs) in the agricultural stage: high (HTL), medium (MTL), and low (LTL).

Methods

The scope of the study covers the agricultural and industrial stages through a “from cradle to gate” approach (from sugarcane cultivation until production of finished products: sugar and alcohol). The system is divided into Agriculture, Sugar Factory, and Distillery. Data used for the inventory are mainly provided by local experts, sugarcane growers, and processing companies. The characteristics of each TL are taken from a regional classification. For the impact assessment, the CML 2001 model (nine impact categories) is used.

Results and discussion

Regardless of the TL, in most of the impact categories, an important contribution attributable to the use of synthetic agrochemicals is evident. As for the comparison among TLs, the ethanol produced with HTL has less impact values than the ones produced with MTL and LTL in seven categories. These results can be mainly explained by the better cultural yields obtained with HTL, and to the fact that sugarcane is not burnt before harvesting in HTL as it is in MTL and LTL.

Conclusions

This study explores the implications of using different TLs for the agricultural tasks on the sugarcane supply chain in Tucumán, which is characterized by a vertically nonintegrated productive scheme. If practices associated to HTL are implemented, a reduction of the environmental impact is observed in most categories. It is necessary to compare these results with economic and social implications to ensure sustainability of the sugarcane value chain.

     

Blue mussel (<Emphasis Type="Italic">Mytilus edulis</Emphasis>) bouchot culture in Mont-St Michel Bay: potential mitigation effects on climate change and eutrophication

Purpose

Bivalve production is an important aquaculture activity worldwide, but few environmental assessments have focused on it. In particular, bivalves’ ability to extract nutrients from the environment by intensely filtering water and producing a shell must be considered in the environmental assessment.

Methods

LCA of blue mussel bouchot culture (grown out on wood pilings) in Mont Saint-Michel Bay (France) was performed to identify its impact hotspots. The chemical composition of mussel flesh and shell was analyzed to accurately identify potential positive effects on eutrophication and climate change. The fate of mussel shells after consumption was also considered.

Results and discussion

Its potential as a carbon-sink is influenced by assumptions made about the carbon sequestration in wooden bouchots and in the mussel shell. The fate of the shells which depends on management of discarded mussels and household waste plays also an important role. Its carbon-sink potential barely compensates the climate change impact induced by the use of fuel used for on-site transportation. The export of N and P in mussel flesh slightly decreases potential eutrophication. Environmental impacts of blue mussel culture are determined by the location of production and mussel yields, which are influenced by marine currents and the distance to on-shore technical base.

Conclusions

Bouchot mussel culture has low environmental impacts compared to livestock systems, but the overall environmental performances depend on farming practices and the amount of fuel used. Changes to the surrounding ecosystem induced by high mussel density must be considered in future LCA studies.

     

The EcoSpold 2 format—why a new format?

Purpose

This paper introduces the new EcoSpold data format for life cycle inventory (LCI).

Methods

A short historical retrospect on data formats in the life cycle assessment (LCA) field is given. The guiding principles for the revision and implementation are explained. Some technical basics of the data format are described, and changes to the previous data format are explained.

Results

The EcoSpold 2 data format caters for new requirements that have arisen in the LCA field in recent years.

Conclusions

The new data format is the basis for the Ecoinvent v3 database, but since it is an open data format, it is expected to be adopted by other LCI databases. Several new concepts used in the new EcoSpold 2 data format open the way for new possibilities for the LCA practitioners and to expand the application of the datasets in other fields beyond LCA (e.g., Material Flow Analysis, Energy Balancing).

     

Bridge processes: a solution for LCI datasets independent of background databases

Introduction

New platforms are emerging that enable more data providers to publish life cycle inventory data.

Background

Providing datasets that are not complete LCA models results in fragments that are difficult for practitioners to integrate and use for LCA modeling. Additionally, when proxies are used to provide a technosphere input to a process that was not originally intended by the process authors, in most LCA software, this requires modifying the original process.

Results

The use of a bridge process, which is a process created to link two existing processes, is proposed as a solution.

Discussion

Benefits to bridge processes include increasing model transparency, facilitating dataset sharing and integration without compromising original dataset integrity and independence, providing a structure with which to make the data quality associated with process linkages explicit, and increasing model flexibility in the case that multiple bridges are provided. A drawback is that they add additional processes to existing LCA models which will increase their size.

Conclusions

Bridge processes can be an enabler in allowing users to integrate new datasets without modifying them to link to background databases or other processes they have available. They may not be the ideal long-term solution but provide a solution that works within the existing LCA data model.

     

Review: life cycle assessments in Nigeria,Ghana, and Ivory Coast

Purpose

Life cycle assessments (LCAs) are considered common quantitative environmental techniques to analyze the environmental impact of products and/or services throughout their entire life cycle. A few LCA studies have been conducted in West Africa. This study aimed to discuss the availability of LCA (and similar) studies in Nigeria, Ghana, and Ivory Coast.

Methods

An online literature review of reports published between 2000 and 2016 was conducted using the following keywords: “life cycle assessment,” “carbon footprinting,” “water footprinting,” “environmental impact,” “Nigeria,” “Ghana” and “Ivory Coast.”

Results and discussion

A total of 31 LCA and environmental studies in Nigeria, Ghana, and Ivory Coast were found; all but one were conducted after 2008. These were mainly academic and most were publicly available. The industries studied included energy sector, waste management, real estate, food sector, and others such as timber and gold. The minimal number of studies on LCAs and environmental impacts in these West African states could be because companies are failing to promote quantitative environmental studies or studies are kept internally for the use of other assessment techniques. Furthermore, it could be that academic research institutions lack cutting-edge research resources for LCA, environmental impact, carbon, and water footprinting studies.

Conclusions

Further quantitative environmental studies should be conducted in Nigeria, Ghana, and Ivory Coast to increase the understanding of environmental impacts. In these countries, the existence of LCA studies (and by association the localized life cycle inventory (LCI) datasets) is crucial as more companies request this information to feed into background processes.

     

Implicit prioritization in life cycle assessment: text mining and detecting metapatterns in the literature

Purpose

Life cycle assessment aims to evaluate multiple kinds of environmental impact associated with a product or process across its life cycle. Objective evaluation is a common goal, though the community recognizes that implicit valuations of diverse impacts resulting from analytical choices and choice of subject matter are present. This research evaluates whether these implicit valuations lead to detectable priority shifts in the published English language academic LCA literature over time.

Methods

A near-comprehensive investigation of the LCA literature is undertaken by applying a text mining technique known as topic modeling to over 8200 environment-related LCA journal article titles and abstracts published between 1995 and 2014.

Results and discussion

Topic modeling using MALLET software and manual validation shows that over time, the LCA literature reflects a dramatic proportional increase in attention to climate change and a corresponding decline in attention to human and ecosystem health impacts, accentuated by rapid growth of the LCA literature. This result indicates an implicit prioritization of climate over other impact categories, a field-scale trend that appears to originate mostly in the broader environmental community rather than the LCA methodological community. Reasons for proportionally increasing publication of climate-related LCA might include the relative robustness of greenhouse gas emissions as an environmental impact indicator, a correlation with funding priorities, researcher interest in supporting active policy debates, or a revealed priority on climate versus other environmental impacts in the scholarly community.

Conclusions

As LCA becomes more widespread, recognizing and addressing the fact that analyses are not objective becomes correspondingly more important. Given the emergence of implicit prioritizations in the LCA literature, such as the impact prioritization of climate identified here with the use of computational tools, this work recommends the development and use of techniques that make impact prioritization explicit and enable consistent analysis of result sensitivity to value judgments. Explicit prioritization can improve transparency while enabling more systematic investigation of the effects of value choices on how LCA results are used.

     

Vanillin derived from lignin liquefaction: a sustainability evaluation

Purpose

Hydrothermal liquefaction of lignin has been demonstrated as a successful process for the synthesis of value-added phenolic chemical compounds such as vanillin. Vanillin has commercial value as a flavor and fragrance ingredient. This study performs a comparative process simulation and life cycle assessment (LCA) of synthesis of vanillin from depolymerization of lignin, one of the most abundant natural polymers on Earth.

Methods

Laboratory-scale scenarios for alkali lignin treatment were analyzed using LCA (TRACI 2.1) and green design metrics (process and energy efficiency, waste prevention, renewability, and hazard/pollution avoidance); scenarios included temperature, residence time, lignin loading, gas presence, and catalyst variants.

Results and discussion

Results show that models which adhere better to green design metrics also result in environmental impact reductions, demonstrating a positive correlation between both sustainability metrics. Vanillin yield increased ~ 7% when reaction time increased from 10 to 20 min; however, the energy used for maintaining operational conditions during process increased between 10 and 50%. Catalyst selection was found to be a deterministic factor affecting results. A catalytic system comprised of a heterogeneous catalyst (nickel oxide) and acidic homogeneous catalyst (supercritical carbon dioxide) was identified as the best option; the catalyst reduced carcinogenic and ecotoxicity impacts by ~ 80 and 90%, respectively when compared to molybdenum oxide. Use of energy and dichloromethane were found to be significant overall environmental impact contributors.

Conclusions

Laboratory results can be used and evaluated via LCA to identify sustainable pathways for commercial chemical processing development.

     

A generalized computational structure for regional life-cycle assessment

Purpose

Regional life-cycle assessment (LCA) is gaining an increasing attention among LCA scholars and practitioners. Here, we present a generalized computational structure for regional LCA, discuss in-depth the major challenges facing the field, and point to a direction in which we believe regional LCA should be headed.

Methods

Using an example, we first demonstrate that when there is regional heterogeneity (be it due to environmental conditions or technologies), average data would be inadequate for estimating the life-cycle impacts of a product produced in a specific region or even that of an average product produced in many regions. And when there is such regional heterogeneity, an understanding of how regions are connected through commodity flows is important to the accuracy of regional LCA estimates. Then, we present a generalized computational structure for regional LCA that takes into account interregional commodity flows, can evaluate various cases of regional differentiation, and can account for multiple impact categories simultaneously. In so doing, we show what kinds of data are required for this generalized framework of regional LCA.

Results and discussion

We discuss the major challenges facing regional LCA in terms of data requirements and computational complexity, and their implications for the choice of an optimal regional scale (i.e., the number of regions delineated within the geographic boundary studied).

Conclusions

We strongly recommend scholars from LCI and LCIA to work together and choose a spatial scale that not only adequately captures environmental characteristics but also allows inventory data to be reasonably compiled or estimated.

     

From behind the curtain: talking about values in LCA

Purpose

Practitioners of life cycle assessment (LCA) acknowledge that more input from social scientists can help advance the cause of life cycle management (LCM). This commentary offers a social science perspective on a long-running question within LCA, namely, how the field should manage not only stakeholders’ values but also those of practitioners themselves.

Methods

More than 60 interviews were conducted with LCA practitioners and their industry clients. Qualitative data were also collected through participant observation at several LCA and LCM conferences, a study of the field’s history, and extensive content and discourse analysis of LCA publications and online forums.

Results and discussion

Results show that LCA practitioners’ values are informed partly by the knowledge acquired through their LCA work. At the same time, LCA standards and professional norms implicitly advise practitioners to keep those values out of their work as much as possible, so as not to compromise its apparent objectivity. By contrast, many social scientists contend openly that value-based judgments, based on “situated knowledge,” can actually enhance the rigor, accountability, and credibility of scientific assessments.

Conclusions

LCA practitioners’ own situated knowledge justifies not only the value choices required by LCA but also their evaluative judgments of contemporary life cycle-based sustainability initiatives. This more critical voice could advance the goals of LCM while also boosting the credibility of LCA more generally.

     

LCA study of unconsumed food and the influence of consumer behavior

Purpose

In the light of anthropogenic resource depletion and the resulting influences on the greenhouse effect as well as globally occurring famine, food waste has garnered increased public interest in recent years. The aim of this study is to analyze the environmental impacts of food waste and to determine to what extent consumers’ behavior influences the environmental burden of food consumption in households.

Methods

A life cycle assessment (LCA) study of three food products is conducted, following the ISO 14040/44 life cycle assessment guidelines. This study addresses the impact categories climate change (GWP100), eutrophication (EP), and acidification (AP). Primary energy demand (PED) is also calculated. For adequate representation of consumer behavior, scenarios based on various consumer types are generated in the customer stage. The customer stage includes the food-related activities: shopping, storage, preparation, and disposal of food products as well as the disposal of the sales packaging.

Results and discussion

If the consumer acts careless towards the environment, the customer stage appears as the main hotspot in the LCA of food products. The environmental impact of food products can be reduced in the customer stage by an environmentally conscious consumer. Shopping has the highest effect on the evaluated impact categories and the PED. Additionally, consumers can reduce the resulting emissions by decreasing the electric energy demand, particularly concerning food storage or preparation. Moreover, results show that the avoidance of wasting unconsumed food can reduce the environmental impact significantly.

Conclusions

Results of this study show that the influence of consumer behavior on the LCA results is important. The customer stage of food products should not be overlooked in LCA studies. To enable comparison among results of other LCA studies, the LCA community needs to develop a common methodology for modeling consumer behavior.

     

Conceptualising attributional LCA is necessary for resolving methodological issues such as the appropriate form of land use baseline

Purpose

The purposes of this commentary are to further an on-going debate concerning the appropriate form of land use baseline for attributional life cycle assessment (LCA) and to respond to a number of arguments advanced by Soimakallio (Int J Life Cycle Assess 20:1364–1375, 2016). The commentary also seeks to clarify the conceptual nature of attributional LCA.

Methods

The overarching approach for resolving the question of the appropriate form of land use baseline for attributional LCA is to clarify what attributional LCA is seeking to represent, i.e. methodological questions can only be resolved if it is clear what the method is seeking to do. An illustrative example is used to explore the different results produced by ‘natural regeneration’ and ‘natural’ baselines.

Results and discussion

It is proposed that attributional LCA should be conceptualised as an inventory of anthropogenic impacts, conceptually akin to other forms of environmental inventory, such as national GHG inventories. The use of natural regeneration baselines is not consistent with this conceptualisation of attributional LCA, and such baselines necessitate further ad hoc or arbitrary adjustments, such as arbitrary temporal windows or the inconsistent treatment of natural emissions.

Conclusions

The use of natural regeneration baselines may be motivated by the impulse to make attributional LCA both an inventory-type method and an assessment of system-wide change. Pulling attributional LCA in two different directions at once results in a conceptually and methodologically incoherent method. The solution is to recognise attributional LCA as an inventory-type method, which therefore has distinct but complementary uses to consequential LCA, which is an assessment of system-wide change.

     

The legitimacy of life cycle assessment in the waste management sector

Purpose

Life cycle assessment (LCA) is commonly presented as a tool for rational decision-making. It has been increasingly used to support decision-making in situations where multiple actors possess diverse, and sometimes conflicting, perspectives, values and motives. Yet, little effort has been placed on understanding LCA in a social framework of action. This paper aims to analyse the legitimacy of LCA in public sector decision-making situations, the criticisms presented against LCA, and suggest potential ways to alleviate these criticisms.

Methods

This study consists of a case study of the application of LCA in the waste management sector in England and France. To gain an understanding of the justification and criticism of LCA, semi-structured interviews were undertaken with national and local level waste management actors. The justifications and criticism of the application of LCA was analysed through an analytical framework, the economies of worth. This suggests that in situations of disagreement, actors’ justifications are required to show their attachment to plural forms of common good. This work analyses the orders of worth in which justifications and criticisms of the application of LCA were based.

Results and discussion

LCA is applied primarily as a test of environmental efficiency, illustrating a collaboration between the industrial and green orders of worth. Actors apply LCA with the aspiration of replicating the scientific method and producing robust evidence to support the most efficient waste treatment option. In this case, efficiency is coupled with the green order of worth, where gains in efficiency mean lower environmental impacts. Internal criticisms of LCA, based in the industrial order of worth, highlights the limitations of LCA to act as a test of environmental efficiency. Furthermore, criticism based in the civic order of worth highlights the friction which arises in decision-making situations when LCA has been seen to subjugate the civic nature of waste management decisions.

Conclusions

One potential way forward for LCA may be to introduce aspects relevant in the civic order of worth which aims at achieving a compromise between the industrial and civic orders of worth. Envisioning LCA as a process-oriented tool, as opposed to an outcome-oriented tool, can allow for aspects on public involvement in the LCA process, thereby increasing its civic legitimacy.

     

Regionalization of agri-food life cycle assessment: a review of studies in Portugal and recommendations for the future

Purpose

One of the main trends in life cycle assessment (LCA) today is towards increased regionalization in inventories and impact assessment methods. LCA studies require the collection of activity data but also of increasingly region-specific background data to accurately depict supply chain processes and enable the application of an increasing number of geographically explicit impact assessment models. This is particularly important for agri-food products. In this review, we assess progress in Portugal towards this goal and provide recommendations for future developments.

Methods

We perform a comprehensive review of available LCA studies conducted for Portuguese agri-food products, in order to evaluate the current state of Portuguese agri-food LCA. Among other issues, we assess availability of data, methods used, level of regionalization, impact assessment model relevance and coherence for inter-product comparability. We also provide conclusions and recommendations based on recent developments in the field.

Results and discussion

We found 22 LCA studies, covering 22 different products. The analysis of these studies reveals limitations in inter-study comparability. The main challenges have to do with a lack of country-specific foreground data sources applied consistently in the studies found, with discrepancies in impact assessment categories, and with the use of simple functional units that may misrepresent the product analyzed.

Conclusions

We conclude that Portuguese agri-food LCA studies do not have a systematic and country-scale approach in order to guarantee regional accuracy and comparability. We propose a research strategy to engage the Portuguese agri-food LCA community in devising a consistent framework before practical application studies are conducted.

     

A review of environmental life cycle assessment studies examining cheese production

Purpose

Cheese is one of the world’s most widely consumed dairy products and its popularity is ever growing. However, as concerns for the environmental impact of industries increase, products like cheese, which have a significant environmental impact, may lose their popularity. A commonly used technique to assess the environmental impact of a product is life cycle assessment (LCA). In this paper, a state-of-the-art review of LCA studies on the environmental impact of cheese production is presented.

Methods

Sixteen LCA studies, which explored the impact from the production of a variety of cheese types (fresh, mature and semi-hard) were examined and discussed. The four stages of the LCA were examined and the range of results of selected environmental impact categories (global warming potential, acidification potential and eutrophication potential) were detailed and discussed.

Results and discussion

For each of these environmental impact categories, raw milk production was consistently found to be the most significant contributor to the total impact, which was followed by processing. It was found that allocation between cheese and its by-products was crucial in determining the impact of cheese production and standardisation or guidelines may be needed. Very little information relating to wastewater treatment system and processes were reported and this leads to inaccurate environmental impact modelling relating to these aspects of the manufacture of cheese. Very few studies included the design of packaging in terms of reducing food waste, which may significantly contribute to the overall environmental impact.

Conclusions

As raw milk production was found to have the greatest contribution to environmental impact, mitigation strategies at farm-level, particularly in relation to enteric fermentation and manure management, need to be implemented. Additionally, based on the literature, there is a suggestion that fresh cheese has less of an environmental impact than semi-hard cheeses, particularly when examining direct energy consumption. However, there needs to be more case studies investigated to justify this statement.

     

On the boundary between economy and environment in life cycle assessment

Purpose

We investigate how the boundary between product systems and their environment has been delineated in life cycle assessment and question the usefulness and ontological relevance of a strict division between the two.

Methods

We consider flows, activities and impacts as general terms applicable to both product systems and their environment and propose that the ontologically relevant boundary is between the flows that are modelled as inputs to other activities (economic or environmental)—and the flows that—in a specific study—are regarded as final impacts, in the sense that no further feedback into the product system is considered before these impacts are applied in decision-making. Using this conceptual model, we contrast the traditional mathematical calculation of the life cycle impacts with a new, simpler computational structure where the life cycle impacts are calculated directly as part of the Leontief inverse, treating product flows and environmental flows in parallel, without the need to consider any boundary between economic and environmental activities.

Results and discussion

Our theoretical outline and the numerical example demonstrate that the distinctions and boundaries between product systems and their environment are unnecessary and in some cases obstructive from the perspective of impact assessment, and can therefore be ignored or chosen freely to reflect meaningful distinctions of specific life cycle assessment (LCA) studies. We show that our proposed computational structure is backwards compatible with the current practice of LCA modelling, while allowing inclusion of feedback loops both from the environment to the economy and internally between different impact categories in the impact assessment.

Conclusions

Our proposed computational structure for LCA facilitates consistent, explicit and transparent modelling of the feedback loops between environment and the economy and between different environmental mechanisms. The explicit and transparent modelling, combining economic and environmental information in a common computational structure, facilitates data exchange and re-use between different academic fields.