Intermonomer cross-linking of F-actin alters the dynamics of its interaction with H-meromyosin in the weak-binding state

Previous cross-linking studies [Kim E, Bobkova E, Hegyi G, Muhlrad A & Reisler E (2002) Biochemistry 41, 86-93] have shown that site-specific cross-linking among F-actin monomers inhibits the motion and force generation of actomyosin. However, it does not change the steady-state ATPase parameters of actomyosin. These apparently contradictory findings have been attributed to the uncoupling of force generation from other processes of actomyosin interaction as a consequence of reduced flexibility at the interface between actin subdomains-1 and -2. In this study, we use EPR spectroscopy to investigate the effects of cross-linking constituent monomers upon the molecular dynamics of the F-actin complex. We show that cross-linking reduces the rotational mobility of an attached probe. It is consistent with the filaments becoming more rigid. Addition of heavy meromyosin (HMM) to the cross-linked filaments further restricts the rotational mobility of the probe. The effect of HMM on the actin filaments is highly cooperative: even a 1 : 10 molar ratio of HMM to actin strongly restricts the dynamics of the filaments. More interesting results are obtained when nucleotides are also added. In the presence of HMM and ADP, similar strongly reduced mobility of the probe was found than in a rigor state. In the presence of adenosine 5'[betagamma-imido] triphosphate (AMPPNP), a nonhydrolyzable analogue of ATP, weak binding of HMM to either cross-linked or native F-actin increases probe mobility. By contrast, weak binding by the HMM/ADP/AlF4 complex has different effects upon the two systems. This protein-nucleotide complex increases probe mobility in native actin filaments, as does HMM + AMPPNP. However, its addition to cross-linked filaments leaves probe mobility as constrained as in the rigor state. These findings suggest that the dynamic change upon weak binding by HMM/ADP/AlF4 which is inhibited by cross-linking is essential to the proper mechanical behaviour of the filaments during movement.     

Functional characterization of the secondary actin binding site of myosin II

The role of the interaction between actin and the secondary actin binding site of myosin (segment 565-579 of rabbit skeletal muscle myosin, referred to as loop 3 in this work) has been studied with proteolytically generated smooth and skeletal muscle myosin subfragment 1 and recombinant Dictyostelium discoideum myosin II motor domain constructs. Carbodiimide-induced cross-linking between filamentous actin and myosin loop 3 took place only with the motor domain of skeletal muscle myosin and not with those of smooth muscle or D. discoideum myosin II. Chimeric constructs of the D. discoideum myosin motor domain containing loop 3 of either human skeletal muscle or nonmuscle myosin were generated. Significant actin cross-linking to the loop 3 region was obtained only with the skeletal muscle chimera both in the rigor and in the weak binding states, i.e., in the absence and in the presence of ATP analogues. Thrombin degradation of the cross-linked products was used to confirm the cross-linking site of myosin loop 3 within the actin segment 1-28. The skeletal muscle and nonmuscle myosin chimera showed a 4-6-fold increase in their actin dissociation constant, due to a significant increase in the rate for actin dissociation (k(-)(A)) with no significant change in the rate for actin binding (k(+A)). The actin-activated ATPase activity was not affected by the substitutions in the chimeric constructs. These results suggest that actin interaction with the secondary actin binding site of myosin is specific for the loop 3 sequence of striated muscle myosin isoforms but is apparently not essential either for the formation of a high affinity actin-myosin interface or for the modulation of actomyosin ATPase activity.     

Structural features of cross-bridges in isometrically contracting skeletal muscle

Two-dimensional x-ray diffraction was used to investigate structural features of cross-bridges that generate force in isometrically contracting skeletal muscle. Diffraction patterns were recorded from arrays of single, chemically skinned rabbit psoas muscle fibers during isometric force generation, under relaxation, and in rigor. In isometric contraction, a rather prominent intensification of the actin layer lines at 5.9 and 5.1 nm and of the first actin layer line at 37 nm was found compared with those under relaxing conditions. Surprisingly, during isometric contraction, the intensity profile of the 5.9-nm actin layer line was shifted toward the meridian, but the resulting intensity profile was different from that observed in rigor. We particularly addressed the question whether the differences seen between rigor and active contraction might be due to a rigor-like configuration of both myosin heads in the absence of nucleotide (rigor), whereas during active contraction only one head of each myosin molecule is in a rigor-like configuration and the second head is weakly bound. To investigate this question, we created different mixtures of weak binding myosin heads and rigor-like actomyosin complexes by titrating MgATPgammaS at saturating [Ca2+] into arrays of single muscle fibers. The resulting diffraction patterns were different in several respects from patterns recorded under isometric contraction, particularly in the intensity distribution along the 5.9-nm actin layer line. This result indicates that cross-bridges present during isometric force generation are not simply a mixture of weakly bound and single-headed rigor-like complexes but are rather distinctly different from the rigor-like cross-bridge. Experiments with myosin-S1 and truncated S1 (motor domain) support the idea that for a force generating cross-bridge, disorder due to elastic distortion might involve a larger part of the myosin head than for a nucleotide free, rigor cross-bridge.     

Rigor-force producing cross-bridges in skeletal muscle fibers activated by a substoichiometric amount of ATP

Isometric skinned muscle fibers were activated by the photogeneration of a substoichiometric amount of ATP and their cross-bridge configurations examined during the development of the rigor force by x-ray diffraction and electron microscopy. By the photogeneration of approximately 100 microM ATP, approximately 2/3 of the concentration of the myosin heads in a muscle fiber, muscle fibers originally in the rigor state showed a transient drop of the force and then produced a long-lasting rigor force (approximately 50% of the maximal active force), which gradually recovered to the original force level with a time constant of approximately 4 s. Associated with the photoactivation, muscle fibers revealed small but distinct changes in the equatorial x-ray diffraction that run ahead of the development of force. After reaching a plateau of force, long-lasting intensity changes in the x-ray diffraction pattern developed in parallel with the force decline. Two-dimensional x-ray diffraction patterns and electron micrographs of the sectioned muscle fibers taken during the period of 1-1.9 s after the photoactivation were basically similar to those from rigor preparations but also contained features characteristic of fully activated fibers. In photoactivated muscle fibers, some cross-bridges bound photogenerated ATP and underwent an ATP hydrolysis cycle whereas a significant population of the cross-bridges remained attached to the thin actin filaments with no available ATP to bind. Analysis of the results obtained indicates that, during the ATP hydrolysis reaction, the cross-bridges detached from actin filaments and reattached either to the same original actin monomers or to neighboring actin monomers. The latter cross-bridges contribute to produce the rigor force by interacting with the actin filaments, first producing the active force and then being locked in a noncycling state(s), transforming their configuration on the actin filaments to stably sustain the produced force as a passive rigor force.     

Cooperative interactions between the contractile proteins of cardiac and skeletal muscle.

The calcium activation of the ATPase (ATP phosphohydrolase, EC 3.6.1.3) activity of cardiac actomyosin reconstituted from bovine cardiac myosin and a complex of actin-tropomyosin-troponin extracted from bovine cardiac muscle at 37 degrees C was studied and compared with similar proteins from rabbit fast skeletal muscle. The proteins of the actin complex were identified by polyacrylamide gel electrophoresis in sodium dodecyl sulfate. Half-maximal activation of the cardiac actomyosin was seen at a calcium concentration of 1.2 +/- 0.002 (S.E. of mean) muM. A hybridized reconstituted actomyosin made with cardiac myosin and the actin-tropomyosin-troponin complex extracted from rabbit skeletal muscle was also activated by calcium but the half-maximal value was shifted to 0.65 +/- 0.02 (S.E. of mean) muM Ca2+. Homologous rabbit skeletal actomyosin showed half-maximal activation at 0.90 +/- 0.01 (S.E. of mean) muM Ca2+ and the value for a hybridized actomyosin made with rabbit skeletal myosin and the actin-complex from cardiac muscle was found at 1.4 +/- 0.03 (S.E. of mean) muM Ca2+ concentration. Kinetic analysis of the Ca2+ activated ATPase activity of reconstituted bovine cardiac actomyosin indicated some degree of cooperativity with respect to calcium. Double reciprocal plots of reconstituted actomyosins made with bovine cardiac actin complex were curvilinear and significantly different than those of reconstituted actomyosins made with the rabbit fast skeletal actin complex. The Ca2+-dependent cooperativity was of a mixed type as determined from Hill plots for homologous reconstituted bovine cardiac and rabbit fast skeletal actomyosin. The results show that cooperative interactions in reconstituted actomyosins were greater when the actin-tropomyosin-troponin complex was derived from cardiac than skeletal muscle.     

Cryo-electron microscopy of S1-decorated actin filaments

We have applied techniques for cryo-electron microscopy, combined with image processing, to both S1-decorated native thin filaments and S1-decorated actin filaments. In our reconstruction the actin subunit has a prolate ellipsoid shape and is composed of two domains. The long axis of the monomer lies roughly perpendicular to the filament axis. The myosin head (S1) approaches the actin filament tangentially, the major interaction being with the outermost domain of actin. To distinguish the position of tropomyosin unambiguously in our map, we compared the maps from decorated thin filaments with those from decorated actin filaments. Our difference map clearly shows a peak corresponding to the position of tropomyosin; tropomyosin is bound to the inner domain of actin just in front of the myosin binding site at a radius of about 40 Å.As a first step toward looking at the actomyosin structure in a state other than rigor, we examined S1 crosslinked to actin filaments by the zero-length crosslinker EDC in the presence of ATP and after pPDM bridging of the reactive thiols of S1. S1 molecules of the crosslinked complexes in the presence of ATP and after pPDM treatment appear dramatically different from those in rigor. The S1s appear more disordered and no longer assume the characteristic rigor 45° angle with the actin filaments.     

Actin cross-linking and inhibition of the actomyosin motor.

Intrastrand cross-linking of actin filaments by ANP, N-(4-azido-2-nitrophenyl) putrescine, between Gln-41 in subdomain 2 and Cys-374 at the C-terminus, was shown to inhibit force generation with myosin in the in vitro motility assays [Kim et al. (1998) Biochemistry 37, 17801-17809]. To clarify the immobilization of which of these two sites inhibits the actomyosin motor, the properties of actins with partially overlapping cross-linked sites were examined. pPDM (N,N'-p-phenylenedimaleimide) and ABP [N-(4-azidobenzoyl) putrescine] were used to obtain actin filaments cross-linked ( approximately 50%) between Cys-374 and Lys-191 (interstrand) and Gln-41 and Lys-113 (intrastrand), respectively. ANP, ABP, and pPDM cross-linked filaments showed similar inhibition of their sliding speeds and force generation with myosin ( approximately 25%) in the in vitro motility assays. In analogy to ANP cross-linking of actin, pPDM and ABP cross-linkings did not change the strong S1 binding to actin and the V(max) and K(m) parameters of actomyosin ATPase. The similar effects of these three cross-linkings reveal the tight coupling between structural elements of the subdomain 2/subdomain 1 interface and show the importance of its dynamic flexibility to force generation with myosin. The possibility that actin cross-linkings inhibit rate-limiting steps in motion and force generation during myosin cross-bridge cycle was tested in stopped-flow experiments. Measurements of the rates of mantADP release from actoS1 and ATP-induced dissociation of actoS1 did not reveal any differences between un-cross-linked and ANP cross-linked actin in these complexes. These findings are discussed in terms of the uncoupling between force generation and other aspects of actomyosin interactions due to a constrained dynamic flexibility of the subdomain 2/subdomain 1 interface in cross-linked actin filaments.     

Cross-linking of contractile proteins from skeletal muscle by treatment with microbial transglutaminase.

The action on muscle proteins of microbial transglutaminase (MTGase), which catalyzes the formation of a "zero-length" covalent cross-link between glutamine and lysine residues in peptides, was studied in order to define a basis for future application of MTGase cross-linking to the study of muscle protein interaction. We examined the cross-linking of skeletal muscle myosin, myosin subfragments, actin, and myofibrils by treatment with MTGase and the possible side-effects of the cross-linking on the enzymic activity of myosin, and found that the rod portions of myosin in myosin filaments were quickly cross-linked to each other by the action of MTGase, but myosin subfragment 1 was not cross-linked to actin. The MgATPase activities at 0.5 M KCl of myosin, heavy meromyosin, subfragment 1, and subfragment 1-actin were not significantly affected by the MTGase reaction. A very small fraction of the head portion of heavy meromyosin was cross-linked to actin in their rigor complexes by MTGase, and the ATPase activity at 0.5 M KCl of the cross-linked heavy meromyosin-actin complexes was slightly enhanced.     

Calcium-sensitive modulation of the actomyosin ATPase by fodrin

Fodrin, a spectrin-like protein isolated from brain, is a long flexible molecule which binds calmodulin and cross-links F-actin. The effects of fodrin on the actin-activated ATPase of myosin have been examined. When added after ATP, fodrin inhibited the actomyosin ATPase. Two to three times as much fodrin was required for inhibition in the presence of Ca2+ as in its absence. Complete inhibition in the absence of Ca2+ occurred at about one fodrin to 200 actins. Inhibition does not appear to result from fodrin cross-linking F-actin, and, thereby, preventing the myosin filaments from reaching the actin filaments; but cross-linking may promote inhibition by trapping the myosin filaments within the cross-linked F-actin. When added before ATP, fodrin stimulated the actomyosin ATPase almost 3-fold in the presence of Ca2+ and by less than 50% in the absence of Ca2+. Stimulation is thought to result from fodrin cross-linking F-actin. After several minutes the stimulations in Ca2+ were greatly reduced, and in the absence of Ca2+ the actomyosin ATPases were substantially inhibited. Whether added before or after ATP, fodrin inhibited the actin-activated ATPase of myosin subfragment 1. This inhibition was also slightly Ca2+ sensitive.     

Mechanism of inhibition of relaxation by N-ethylmaleimide treatment of myosin.

It has remained unexplained why N-ethylmalaeimide (NEM) treatment of myosin can inhibit relaxation in actomyosin systems from rabbit skeletal muscle which appear to be regulated solely through tropomyosin and troponin. Since rigor complexes between (nucleotide-free) myosin and actin affect the tropinin-tropomyosin system, the possibility was explored that, as a result of NEM treatment, some of the myosin maintains rigor complexes with actin in the presence of ATP which might be responsible for inhibition of relaxation. Evidence is presented indicating that such a mechanism might account for the effects of NEM treatment. First, after exhaustive NEM treatment of heavy meromysin (HMM), acto-HMM complexes were no longer dissociated by ATP. Second, admixture of such NEM-treated, enzymatically inactive HMM or myosin to native regulated actomyosin or acto-HMM inhibited relaxation.     

Antibody against the amino terminus of alpha-actin inhibits actomyosin interactions in the presence of ATP

Actomyosin interactions in the presence of ATP were examined by using site-specific antibodies directed against the first seven N-terminal residues on skeletal alpha-actin. Fab fragments of these antibodies (S alpha N Fab) inhibited effectively the actin-activated ATPase of myosin subfragment 1 (S-1) at both 5 and 25 degrees C. Binding experiments carried out in the presence of ATP at 5 degrees C revealed that the catalytic inhibition was related to the inhibition of S-1 binding to actin by Fab. At equimolar ratios of Fab to actin, the binding of S-1 to actin and the activated ATPase were inhibited by 75 and 82%, respectively. These results, when contrasted with the small effect of Fab on rigor actomyosin binding, suggest ATP-induced changes at the interface of actin and myosin.     

Time-resolved electron microscopic analysis of the behavior of myosin heads on actin filaments after photolysis of caged ATP

The interaction between myosin subfragment 1 (S1) and actin filaments after the photolysis of P3-1-(2-nitrophenyl)ethyl ester of ATP (caged ATP) was analyzed with a newly developed freezing system using liquid helium. Actin and S1 (100 microM each) formed a ropelike double-helix characteristic of rigor in the presence of 5 mM caged ATP at room temperature. At 15 ms after photolysis, the ropelike double helix was partially disintegrated. The number of S1 attached to actin filaments gradually decreased up to 35 ms after photolysis, and no more changes were detected from 35 to 200 ms. After depletion of ATP, the ropelike double helix was reformed. Taking recent analyses of actomyosin kinetics into consideration, we concluded that most S1 observed on actin filaments at 35-200 ms are so called "weakly bound S1" (S1.ATP or S1.ADP.Pi) and that the weakly bound S1 under a rapid association- dissociation equilibrium with actin filaments can be captured by electron microscopy by means of our newly developed freezing system. This enabled us to directly compare the conformation of weakly and strongly bound S1. Within the resolution of deep-etch replica technique, there were no significant conformational differences between weakly and strongly bound S1, and neither types of S1 showed any positive cooperativity in their binding to actin filaments. Close comparison revealed that the weakly and strongly bound S1 have different angles of attachment to actin filaments. As compared to strongly bound S1, weakly bound S1 showed a significantly broader distribution of attachment angles. These results are discussed with special reference to the molecular mechanism of acto-myosin interaction in the presence of ATP.     

Effect of cardiac and skeletal tropomyosin on Mg2+-actomyosin ATPase.

Tropomyosin, one of the proteins regulating the sarcomere, was prepared from pig heart and rabbit skeletal muscles. The effect of these two different tropomyosins was studied between 0.5 and 10 mM of Mg2+ at a constant ATP concentration (1 mM) on reconstituted actomyosin prepared from pig heart myosin and rabbit skeletal actin. Cardiac and skeletal tropomyosin both activated the ATPase at low Mg2+ concentrations and inhibited it above 3 mM. The pig heart and rabbit skeletal tropomyosins which contain two isomers, alpha alpha and alpha beta, respectively has very similar effects on actomyosin ATPase.     

Cooperative structural change of actin filaments interacting with activated myosin motor domain, detected with copolymers of pyrene-labeled actin and acto-S1 chimera protein

Acto-S1 chimera proteins CP24 and CP18 carry the entire actin sequence, inserted in loop 2 of the motor domain of Dictyostelium myosin II, and have MgATPase activity close to that of natural Dictyostelium actomyosin [M.S.P. Siddique, T. Miyazaki, E. Katayama, T.Q.P. Uyeda, M. Suzuki, Evidence against essential roles of subdomain 1 of actin in actomyosin sliding movements, Biochem. Biophys. Res. Commun. 332 (2005) 474-481]. Here, we examined and detected cooperative structural change of actin filaments accompanying interaction with myosin motor domain in the presence of ATP using copolymer filaments consisting of pyrene-labeled skeletal actin (SA) and either CP24 or CP18. Upon addition of ATP, the fluorescence intensity increased over the range from 380 to 480nm using 365-nm excitation. The relative increases of fluorescence intensity at 390nm were 14%, 46%, and 77% for the copolymer filaments with the CP24 to actin molar ratios of 0.0625, 0.143, and 0.333, respectively, and demonstrated a sigmoid behavior. Stoichiometric analysis indicates that each CP24 molecule appears to affect four actin molecules, on average, in SA-CP24 copolymers, and each CP18 molecule appears to affect three actin molecules in SA-CP18 copolymers.     

Troponin is a potential regulator for actomyosin interactions

Troponin extracted from rabbit skeletal muscle directly binds to an actin filament in a molar ratio of 1:1 even in the absence of tropomyosin. An actin filament decorated with troponin did not exhibit significant difference from pure actin filaments in the maximum rate of actomyosin ATP hydrolysis and the sliding velocity of the filament examined by means of an in vitro motility assay. However, the relative number of troponin-bound actin filaments moving in the absence of calcium ions decreased to half that in their presence. The amount of HMM bound to the filaments was less than 4% of actin monomers in the presence of TNs. In addition, actin filaments could not move when Tn molecules were bound in the molar ratio of about 1:1 although they sufficiently bind to myosin heads. These results indicate that troponin can transform an actin monomer within a filament into an Off-state without sterically blocking of the myosin-binding sites with tropomyosin molecules.     

The Fraction of Myosin Motors That Participate in Isometric Contraction of Rabbit Muscle Fibers at Near-Physiological Temperature

The duty ratio, or the part of the working cycle in which a myosin molecule is strongly attached to actin, determines motor processivity and is required to evaluate the force generated by each molecule. In muscle, it is equal to the fraction of myosin heads that are strongly, or stereospecifically, bound to the thin filaments. Estimates of this fraction during isometric contraction based on stiffness measurements or the intensities of the equatorial or meridional x-ray reflections vary significantly. Here, we determined this value using the intensity of the first actin layer line, A1, in the low-angle x-ray diffraction patterns of permeable fibers from rabbit skeletal muscle. We calibrated the A1 intensity by considering that the intensity in the relaxed and rigor states corresponds to 0% and 100% of myosin heads bound to actin, respectively. The fibers maximally activated with Ca²⁺ at 4°C were heated to 31–34°C with a Joule temperature jump (T-jump). Rigor and relaxed-state measurements were obtained on the same fibers. The intensity of the inner part of A1 during isometric contraction compared with that in rigor corresponds to 41–43% stereospecifically bound myosin heads at near-physiological temperature, or an average force produced by a head of ∼6.3 pN.     

Evidence against essential roles for subdomain 1 of actin in actomyosin sliding movements

We have engineered acto-S1chimera proteins carrying the entire actin inserted in loop 2 of the motor domain of Dictyostelium myosin II with 24 or 18 residue-linkers (CP24 and CP18, respectively). These proteins were capable of self-polymerization as well as copolymerization with skeletal actin and exhibited rigor-like structures. The MgATPase rate of CP24-skeletal actin copolymer was 1.06 s(-1), which is slightly less than the V(max) of Dictyostelium S1. Homopolymer filaments of skeletal actin, CP24, and CP18 moved at 4.7+/-0.6, 2.9+/-0.6, and 4.1+/-0.8 microm/s (mean+/-SD), respectively, on coverslips coated with skeletal myosin at 27 degrees C. Statistically thermodynamic considerations suggest that the S1 portion of chimera protein mostly resides on subdomain 1 (SD-1) of the actin portion even in the presence of ATP. This and the fact that filaments of CP18 with shorter linkers moved faster than CP24 filaments suggest that SD-1 might not be as essential as conventionally presumed for actomyosin sliding interactions.     

Binding of myosin to actin in myofibrils during ATP hydrolysis

Measurements of cross-bridge attachment to actin in myofibrils during ATP hydrolysis require prior fixation of myofibrils to prevent their contraction. The optimal cross-linking of myofibrils was achieved by using 10 mM carbodiimide (EDC) under rigor conditions and at 4 degrees C. The fixed myofibrils had elevated MgATPase activity (150%) and could not contract. As judged by chymotryptic digestions and subsequent SDS gel electrophoresis analysis, less than 25% of myosin heads were cross-linked in these myofibrils. The isolated, un-cross-linked myosin heads showed pH-dependent Ca2+- and EDTA(K+)-ATPase activities similar to those of standard intact S-1. For measurements of myosin binding to actin, the modified myofibrils were digested with trypsin at a weight ratio of 1:50 under rigor, relaxed, and active-state conditions. Aliquots of tryptic digestion reactions were then cleaved with chymotrypsin to yield isolated myosin heads and their fragments. Analysis of the decay of myosin heavy-chain bands on SDS gels yielded the rates of myosin cleavage under all conditions and enabled the measurements of actomyosin binding in myofibrils in the presence of MgATP. Using this approach, we detected rigorlike binding of 25 +/- 6% of myosin heads to actin in myofibrils during ATP hydrolysis.     

Interaction of myosin with F-actin: time-dependent changes at the interface are not slow

The kinetics of formation of the actin-myosin complex have been reinvestigated on the minute and second time scales in sedimentation and chemical cross-linking experiments. With the sedimentation method, we found that the binding of the skeletal muscle myosin motor domain (S1) to actin filament always saturates at one S1 bound to one actin monomer (or two S1 per actin dimer), whether S1 was added slowly (17 min between additions) or rapidly (10 s between additions) to an excess of F-actin. The carbodiimide (1-ethyl-3-(3-dimethylaminopropyl) carbodiimide, EDC)-induced cross-linking of the actin-S1 complex was performed on the subsecond time scale by a new approach that combines a two-step cross-linking protocol with the rapid flow-quench technique. The results showed that the time courses of S1 cross-linking to either of the two actin monomers are identical: they are not dependent on the actin/S1 ratio in the 0.3-20-s time range. The overall data rule out a mechanism by which myosin rolls from one to the other actin monomer on the second or minute time scales. Rather, they suggest that more subtle changes occur at the actomyosin interface during the ATP cycle.     

Direct modeling of x-ray diffraction pattern from skeletal muscle in rigor

Available high-resolution structures of F-actin, myosin subfragment 1 (S1), and their complex, actin-S1, were used to calculate a 2D x-ray diffraction pattern from skeletal muscle in rigor. Actin sites occupied by myosin heads were chosen using a "principle of minimal elastic distortion energy" so that the 3D actin labeling pattern in the A-band of a sarcomere was determined by a single parameter. Computer calculations demonstrate that the total off-meridional intensity of a layer line does not depend on disorder of the filament lattice. The intensity of the first actin layer A1 line is independent of tilting of the "lever arm" region of the myosin heads. Myosin-based modulation of actin labeling pattern leads not only to the appearance of the myosin and "beating" actin-myosin layer lines in rigor diffraction patterns, but also to changes in the intensities of some actin layer lines compared to random labeling. Results of the modeling were compared to experimental data obtained from small bundles of rabbit muscle fibers. A good fit of the data was obtained without recourse to global parameter search. The approach developed here provides a background for quantitative interpretation of the x-ray diffraction data from contracting muscle and understanding structural changes underlying muscle contraction.