Differential reduction of interchain disulphide bonds of mouse immunoglobulin G

The relative lability of the interchain disulphide bonds of mouse G_2a-myeloma protein 5563 was studied as a function of 2-mercaptoethanol concentration. Analysis of partial-reduction mixtures by polyacrylamide-gel electrophoresis and microdensitometry showed that the disulphide bonds between light and heavy chains are much more susceptible to reduction than the bonds between heavy chains. At a low concentration of 2-mercaptoethanol (10mm) the major dissociable products of mouse immunoglobulin G are heavy-chain dimers and free light chains. These findings contrast with the reported behaviour of rabbit immunoglobulin G, for which the lability of inter-heavy-chain bonds was found to exceed that of the bonds linking light and heavy chains (Hong & Nisonoff, 1965); the relative stability of rabbit immunoglobulin G interchain bonds was confirmed in the present study. Examination of human immunoglobulin G and an immunoglobulin G (γ2) of guinea pig showed that at least in the majority of molecules, as with mouse immunoglobulin G, the disulphide bonds between light and heavy chains are more susceptible to reduction than the inter-heavy-chain bonds.     

Interconversion of conformational isomers of light chains in the Mcg immunoglobulins.

Previous crystallographic studies in this laboratory demonstrated that immunoglobulin light chains with the same amino acid sequence can have at least two and probably three or more conformations, depending on whether the second member of an interacting pair is a light or heavy chain. If a heavy chain is not available in the assembly medium, a second light chain plays the structural role of the heavy chain in the formation of a dimer. In the present work, the lambda-type light chains were dissociated from the heavy chains of a serum IgG1 immunoglobulin from the patient Mcg and reassembled noncovalently into a dimer. The reassembly process was completed by allowing the penultimate half-cystine residues to form an interchain disulfide bond. The covalently linked dimer was compared with the Mcg urinary Bence-Jones dimer, for which an atomic model has been fitted to a 2.3-A electron density map. The assembled dimer and the native Bence-Jones protein were indistinguishable in their chromatographic and electrophoretic properties, as well as in their activity in the binding of bis(dinitrophenyl)lysine. These results indicate that the light chains can be converted into the two types of Bence-Jones conformational isomers. The procedure was also reversed: the two Bence-Jones isomers were dissociated and reassembled as the single type of isomer associating with each of two heavy chains in the IgG1 protein. The change in activity occurring when a light chain associates with a heavy chain instead of a second light chain is illustrated by the fact that the Mcg IgG1 immunoglobulin does not bind dis(dinitrophenyl)lysine in measurable amounts.     

The amino acid sequences of the Fd fragments of two human γ heavy chains

The amino acid sequences of the Fd fragments of two human pathological immunoglobulins of the immunoglobulin G1 class are reported. Comparison of the two sequences shows that the heavy-chain variable regions are similar in length to those of the light chains. The existence of heavy chain variable region subgroups is also deduced, from a comparison of these two sequences with those of another gamma 1 chain, Eu, a mu chain, Ou, and the partial sequence of a fourth gamma 1 chain, Ste. Carbohydrate has been found to be linked to an aspartic acid residue in the variable region of one of the gamma 1 chains, Cor.     

Co-translational modification of nascent immunoglobulin heavy and light chains

We have investigated the in vivo co-translational covalent modification of nascent immunoglobulin heavy and light chains. Nascent polypeptides were separated from completed polypeptides by ion-exchange chromatography of solubilized ribosomes on QAE-Sephadex. First, we have demonstrated that MPC 11 nascent heavy chains are quantitatively glycosylated very soon after the asparaginyl acceptor site passes through the membrane into the cisterna of the rough endoplasmic reticulum. Nonglycosylated completed heavy chains of various classes cannot be glycosylated after release from the ribosome, due either to rapid intramolecular folding and/or intermolecular assembly, which cause the acceptor site to become unavailable for the glycosylation enzyme. Second, we have shown that the formation of the correct intrachain disulfide loop within the first light chain domain occurs rapidly and quantitatively as soon as the appropriate cysteine residues of the nascent light chain pass through the membrane into the cisterna of the endoplasmic reticulum. The intrachain disulfide loop in the second or constant region domain of the light chain is not formed on nascent chains, because one of the cysteine residues involved in this disulfide bond does not pass through the endoplasmic reticulum membrane prior to chain completion and release from the ribosome. Third, we have demonstrated that some of the initial covalent assembly (formation of interchain disulfide bonds) occurs on nascent heavy chains prior to their release from the ribosome. The results are consistent with the pathway of covalent assembly of the cell line, in that completed light chains are assembled onto nascent heavy chains in MPC 11 cells (IgG₂b), where a heavy-light half molecule is the major initial covalent intermediate; and completed heavy chains are assembled onto nascent heavy chains in MOPC 21 cells (IgG₁), where a heavy chain dimer is the major initial disulfide linked intermediate.     

One cell–one immunoglobin. Origin of limited heterogeneity of myeloma proteins

Plasma-cell tumour 5563 forms a single molecular species of immunoglobulin IgG(2)a, i.e. one variant of heavy chain and one variant of light chain. The molecules formed are labile and undergo alterations in charge properties, which rapidly lead to heterogeneity of the myeloma protein after synthesis. The single immunoglobulin species originally formed is found only after the shortest time-intervals tested, i.e. 10min incubation. Two types of changes in charge properties take place: (1) The originally formed protein (component o) is converted via an intermediate o' into the most basic form of 5563 myeloma protein found in serum (component a). Charge differences between these components are suppressed at pH8.9, but can be studied by chromatography at pH6.5 or by analysis of isoelectric points by isoelectric focusing in polyacrylamide gel. The conversion of components o and o' into component a apparently commences soon after assembly of the molecules and proceeds to completion extracellularly. (2) The second type of charge difference that distinguishes components a, b, c and d is exhibited over the pH range 6.0-8.9, but not at acid pH, and has been studied by electrophoresis at pH8.9, by chromatography and by isoelectric focusing. Conversion of component a into components b, c, d and e is only partial so that all five components can be found at decreasing concentrations in serum. Both types of charge alteration can be effected in vitro in the presence of serum, with optimum pH8.0. None of the charge differences could be attributed to the secretion process, since a component with the same isoelectric point as component o was found in secreted myeloma protein (1h). We have found no evidence to support the idea that the first type of change from component o to component a is due to ring formation of N-terminal [(14)C]glutamine into pyrrolid-2-one-5-carboxylic acid; however, our findings do not exclude this process happening very rapidly to a precursor of component o, possibly the polypeptide chain during or immediately after synthesis. In studying this point we noted that not only the heavy chains but also the kappa-type light chain of mouse 5563 myeloma protein have a blocked N-terminus.     

The molecular organization of the protein HC-IgA complex (HC-IgA)

Complexes of protein HC and monoclonal IgA1 or IgA2 or polyclonal IgA were isolated from human blood plasma. Dodecyl sulfate-polyacrylamide gel electrophoresis and immunoblotting showed that all complexes contain three types of chains: two light immunoglobulin chains, one regular IgA alpha-chain, and one chain with Mr = 90,000 carrying both alpha-chain and protein HC epitopes. The complexes were split into Fab alpha and Fc alpha fragments by bacterial IgA proteases. The protein HC epitopes were linked to the Fc fragments. Complexes of protein HC and an alpha-chain devoid of the variable region and the first heavy chain constant domain could also be demonstrated to be present in the blood plasma of a patient with alpha-heavy chain disease. Pepsin digestion of HC-IgA released a fragment containing all the protein HC epitopes and the C-terminal nonapeptide of the IgA alpha-chain. The light immunoglobulin chains, the regular alpha-chain, and the 90,000-Da chain from monoclonal HC-IgA1 were isolated by preparative dodecyl sulfate-polyacrylamide gel electrophoresis and by repeated gel filtration in dodecyl sulfate-containing buffer. The N-terminal amino acid sequence of the alpha-chain was identical with that of a regular human heavy immunoglobulin chain of subgroup III. Subtractive degradations of the 90,000-Da chain displayed 2 amino acid residues in each position in a pattern suggesting simultaneous degradations of a chain identical with the regular alpha-chain of HC-IgA and of uncomplexed, low molecular weight, protein HC. All the results are compatible with a model for HC-IgA in which a single low molecular weight protein HC polypeptide chain is covalently linked, side by side, to the C-terminal nonapeptide of one of the two alpha-chains of a regular monomeric IgA unit.     

Sequence studies of the Fd section of the heavy chain of rabbit immunoglobulin G

A partial amino acid sequence was given by Cebra, Steiner & Porter (1968b) of the N-terminal half of the heavy chain of rabbit immunoglobulin G. This was extended and in part corrected to give a continuous sequence of 136 residues, which together with other work accounts for three-quarters of the total sequence. Evidence is given suggesting that there is a limited region of 10–15 residues that are exceptionally variable in the heavy chains from pooled rabbit immunoglobulin G.     

The binding of lanthanides to non-immune rabbit immunoglobulin G and its fragments.

The binding of Gd(III) to rabbit IgG (immunoglobulin G) and the Fab (N-terminal half of heavy and light chain), (Bab')2 (N-terminal half of heavy and light chains joined by inter-chain disulphide bond), Fc (C-terminal half of heavy-chain dimer)and pFc' (C-terminal quarter of heavy-chain dimer) fragments was demonstrated by measurements of the enhancement of the solvent-water proton relaxation rates in the appropriate Gd(III) solutions. At pH 5.5 there are six specific Gd(III)-binding sites on the IgG. These six sites can be divided into two classes; two very 'tight' sites on the Fc fragment (Kd approx. 5 muM) and two weaker sites on each Fab region (Kd approx. 140 muM). Ca(II) does not apparently compete for these metal-binding sites. The metal-binding parameters for IgG can be explained as the sum of the metal binding to the isolated Fab and Fc fragments, suggesting that there is no apparent interaction between the Fab and Fc regions in the IgG molecule. The binding of Gd(III) to Fab and Fc fragments was also monitored by measuring changes in the electron-spin-resonance spectrum of Gd(III) in the presence of each fragment and also by monitoring the effects of Gd(III) on the protein fluorescence at 340 nm (excitation 295 nm). The fluorescence of Tb(III) solutions of 545 nm (excitation 295 nm) is enhanced slightly on addition of Fab or Fc.     

Accumulation of immunoglobulin messenger ribonucleic acid in immunized mouse spleen.

We have measured the concentration of mRNAs coding for immunoglobulins, k and lambda type light chains and gamma 1 type heavy chain, in mouse spleen cells activated by bacterial lipopolysaccharide or sheep red blood cells. These mRNAs were quantitated by hybridization to radioactive DNA complementary to highly purified immunoglobulin mRNAs from mouse myelomas. In the lipopolysaccharide-stimulated spleen cells, only light chain mRNA accumulated, whereas gamma 1 type heavy chain mRNA remained unvaried. The light chain mRNA concentration also increased in purified bone-marrow-derived lymphocytes. The lipopolysaccharide-induced light chain mRNA was similar to light chain mRNAs purified from myelomas. The accumulation and disappearance of light chain mRNA in bone-marrow-derived lymphocytes coincide with the kinetics of synthesis of immunoglobulin M which is the major species induced by lipopolysaccharide. In sheep red blood cell stimulated spleen, the specific accumulation of k type light chain and gamma 1 type heavy chain mRNAs parallels immunoglobulin G synthesis. These results seem to indicate that the increment of immunoglobulin mRNA concentration in bone-marrow-derived lymphocytes is important for induction of immunoglobulin synthesis.     

Contribution to the structural characterization of gamma globulin from pig colostrum

From the results obtained in the present work it is concluded that gamma globulin of the 7 S type (γG) which represents the main immunoglobulin component of pig colostrum, differs from serum γG globulin by the presence of another type of polypeptide chain, designed L₂; the latter was detected after S-sulfonation in starch gel electrophoresis as the fastest moving component and its immunoelectrophoretic pattern shows the presence of two precipitating components. Preparation of soluble heavy and light chains enabled us to study them imunochemically. The heavy chain is represented by two zones; the fainter one was not detected in comparative analysis of the heavy chain of serum γG globulin. The L₁ chain of colostral gamma globulin and the light chain of serum gamma globulin seem to contain three precipitating components, one of which appears due to aging of the chain solution in the presence of glycine. The material from colostrum seems to contain a larger amount of this component than serum. Further it was shown that the component arising in this way is antigenically closely related to the heavy chain.     

Formation of intermolecular disulfide bonds on nascent immunoglobulin polypeptides.

The initial step of intermolecular covalent assembly of immunoglobulins molecules involves formation of heavy chain-light chain or heavy chain-heavy chain disulfide bonds. Using QAE-Sephadex chromatography to isolate microsomal nascent polypeptides, we have shown that this initial step of intermolecular covalent assembly occurs, to a substantial extent, on nascent heavy chains, as well as on completed heavy chains as previously demonstrated by others. In MPC 11 mouse myeloma cells, completed light chains are assembled covalently to nascent heavy chains, whereas in MOPC 21 mouse myeloma cells, completed heavy chains are assembled covalently to nascent heavy chains. These results are consisted with the heavy-light half-molecule being the major initial intermediate in the assembly of MPC 11 IgG2b and heavy-heavy dimer being the major initial intermediate formed in assembly of MOPC 21 IgG1. The nascent MPC 11 heavy chain must be at least 38,000 daltons in size before assembly with the light chain occurs, even though the heavy chain cysteine involved in this disulfide bond is 131 residues (approximately 15,000 daltons) from the NH2 terminus. In addition, pulse-chase labeling studies of MPC 11 cells have shown that the assembly of completed light chains with the nascent heavy chain must occur within a few minutes of the synthesis of the light chain even though a large excess of unassembled MPC 11 light chains remain inside the cell for an average time of 2 h before being secreted.     

Characterization of Humanized Antibodies Secreted by Aspergillus niger

Two different humanized immunoglobulin G1(κ) antibodies and an Fab′ fragment were produced by Aspergillus niger. The antibodies were secreted into the culture supernatant. Both light and heavy chains were initially synthesized as fusion proteins with native glucoamylase. After antibody assembly, cleavage by A. niger KexB protease allowed the release of free antibody. Purification by hydrophobic charge induction chromatography proved effective at removing any antibody to which glucoamylase remained attached. Glycosylation at N297 in the Fc region of the heavy chain was observed, but this site was unoccupied on approximately 50% of the heavy chains. The glycan was of the high-mannose type, with some galactose present, and the size ranged from Hex₆GlcNAc₂ to Hex₁₅GlcNAc₂. An aglycosyl mutant form of antibody was also produced. No significant difference between the glycosylated antibody produced by Aspergillus and that produced by mammalian cell cultures was observed in tests for affinity, avidity, pharmacokinetics, or antibody-dependent cellular cytotoxicity function.     

Biochemical characterization of a Dictyostelium myosin II heavy-chain phosphatase that promotes filament assembly.

In Dictyostelium cells, myosin II is found as cytosolic nonassembled monomers and cytoskeletal bipolar filaments. It is thought that the phosphorylation state of three threonine residues in the tail of myosin II heavy chain regulates the molecular motor's assembly state and localization. Phosphorylation of the myosin heavy chain at threonine residues 1823, 1833 and 2029 is responsible for maintaining myosin in the nonassembled state, and subsequent dephosphorylation of these residues is a prerequisite for assembly into the cytoskeleton. We report here the characterization of myosin heavy-chain phosphatase activities in Dictyostelium utilizing myosin II phosphorylated by myosin heavy-chain kinase A as a substrate. One of the myosin heavy-chain phosphatase activities was identified as protein phosphatase 2A and the purified holoenzyme was composed of a 37-kDa catalytic subunit, a 65-kDa A subunit and a 55-kDa B subunit. The protein phosphatase 2A holoenzyme displays two orders of magnitude higher activity towards myosin phosphorylated on the heavy chains than it does towards myosin phosphorylated on the regulatory light chains, consistent with a role in the control of filament assembly. The purified myosin heavy-chain phosphatase activity promotes bipolar filament assembly in vitro via dephosphorylation of the myosin heavy chain. This system should provide a valuable model for studying the regulation and localization of protein phosphatase 2A in the context of cytoskeletal reorganization.     

Allotype-related sequence variation of the heavy chain of rabbit immunoglobulin G

The heavy chain of rabbit immunoglobulin G exists in three major allotypic patterns, Aa1–Aa3. A comparison of the amino acid compositions of the heavy chains isolated from immunoglobulin IgG homozygous for each allotypic determinant revealed the presence of an additional methionine residue per chain in the Aa3 allotype relative to the Aa1 and Aa2 allotypes. The position of the additional methionine residue was determined by cyanogen bromide cleavage and by tryptic digestion of the γ-chains; it coincided with the inter-Fd–Fc area of the chain. Isolation and characterization of the corresponding tryptic peptides of 31 amino acid residues from each of the allotypes showed the presence of a methionine-for-threonine replacement in the Aa3 allotype, but only in about 70–80% of the molecules. No other allotypic variations were seen in this tryptic peptide. Allotypically related variations in composition were also detected in the N-terminal cyanogen bromide-cleavage peptide.     

Effect of a disulfide-interchange enzyme on the assembly of human secretory immunoglobulin A from immunoglobulin A and free secretory component.

A disulfide-interchange enzyme from rat liver microsomes was found to promote binding in vitro of human free secretory component (SC) to dimeric serum-type IgA containing J chain, as assessed by immune precipitation and gel filtration. This effect was greater withe native than with partially reduced SC. Most of the bound SC was covalently linked, as determined by electrophoresis in polyacrylamide gels in detergent. The enzyme did not promote binding of native or partially reduce SC to IgG, IgA monomer, IgA dimer without J chain, or IgM. In the case of IgM, the enzyme did, however, promote covalent bonding of previously non-covalently linked SC. The results overall suggest that a disulfide-interchange enzyme could play a role in vivo in the cell-associated assembly of secretory IgA by promoting the covalent attachment of SC to a dimer of serum-type IgA and that the J chain in the IgA dimer contributes to the enzyme effect.     

Assembly, secretion, and vacuolar delivery of a hybrid immunoglobulin in plants

Secretory immunoglobulin (Ig) A is a decameric Ig composed of four alpha-heavy chains, four light chains, a joining (J) chain, and a secretory component (SC). The heavy and light chains form two tetrameric Ig molecules that are joined by the J chain and associate with the SC. Expression of a secretory monoclonal antibody in tobacco (Nicotiana tabacum) has been described: this molecule (secretory IgA/G [SIgA/G]) was modified by having a hybrid heavy chain sequence consisting of IgG gamma-chain domains linked to constant region domains of an IgA alpha-chain. In tobacco, about 70% of the protein assembles to its final, decameric structure. We show here that SIgA/G assembly and secretion are slow, with only approximately 10% of the newly synthesized molecules being secreted after 24 h and the bulk probably remaining in the endoplasmic reticulum. In addition, a proportion of SIgA/G is delivered to the vacuole as at least partially assembled molecules by a process that is blocked by the membrane traffic inhibitor brefeldin A. Neither the SC nor the J chain are responsible for vacuolar delivery, because IgA/G tetramers have the same fate. The parent IgG tetrameric molecule, containing wild-type gamma-heavy chains, is instead secreted rapidly and efficiently. This strongly suggests that intracellular retention and vacuolar delivery of IgA/G is due to the alpha-domains present in the hybrid alpha/gamma-heavy chains and indicates that the plant secretory system may partially deliver to the vacuole recombinant proteins expected to be secreted.     

Primary structure of human gamma 3 immunoglobulin deletion mutant: gamma 3 heavy-chain disease protein Wis

The complete sequence of a gamma 3 heavy-chain disease (HCD) protein Wis is presented. The molecule is a dimer of a 289-residue chain linked by 12 disulfide bonds. Protein Wis has an unusual amino terminus, followed by a deletion of most of the VH domain. After a small stretch homologous to the VC joining region, there is a second deletion which ends at the beginning of the quadruplicated hinge. Two carbohydrate groups are linked to Asn-6 and -140. the molecule has an extra interchain disulfide bridge at position 7 in addition to the 11 normally present in the quadruplicated hinge. The previously noted homology to the gamma 1 heavy chain is striking; from positions 224 to 234, protein Wis resembles gamma 1 Nei [Ponstingl, H., & Hilschmann, N. (1976) Hoppe-Seyler's Z. Physiol. Chem. 357, 1571--1604] except for a serine which replaces Asn at position 227. The results, taken together with studies of other immunoglobulin heavy-chain deletion mutants, support the suggestion that the different domains and interdomain regions of human H chains are coded for by different gene segments and that the deleted proteins reflect alterations in the recombination of different genes and/or the splicing of heterogeneous nuclear messenger ribonucleic acid (hn mRNA).     

Structural characterization of immunoglobulin G using time-dependent disulfide bond reduction

Time-dependent reduction of the disulfide bonds of immunoglobulin G (IgG) using dithiothreitol (DTT) was used to characterize the structure of IgG. After treatment with DTT, gel electrophoresis was used to separate the resulting IgG fragments, which were subsequently quantified. Using this approach, the disulfide bond between a light chain and a heavy chain was determined to be cleaved faster than the disulfide bonds between two heavy chains.     

Subfragments from the Fc fragment of human immunoglobulin G. Isolation and physicochemical characterization

A fragment termed fragment Fc' and a related fragment termed fragment pFc' produced by the actions of papain and pepsin respectively on human immunoglobulin G have been isolated and characterized. Amino acid analyses and experiments utilizing cyanogen bromide to cleave the methionyl bonds of the Fc' and pFc' fragments make it possible to locate both fragments within the known chain structure of the immunoglobulin G molecule. The pFc' fragment is probably a non-covalently linked dimer situated at the C-terminal end of the molecule, containing about 232 amino acid residues and having a molecular weight of 26000. The Fc' fragment is a similar dimer of about 182 residues extending from near residue 14 to near residue 105 (numbered from the C-terminal end) of the gamma-chain and has a molecular weight of 21000.