Enzymatic recycling-based amperometric immunosensor for the ultrasensitive detection of okadaic acid in shellfish

Electrochemical immunosensors based on a competitive indirect enzyme-linked immunosorbent assay (ciELISA) and an enzymatic recycling system were developed for the detection of okadaic acid (OA). OA-ovalbumin (OA-OVA) conjugate was immobilised on screen-printed electrodes (SPEs) and competition of a newly generated monoclonal antibody (MAb) for free and immobilised OA was subsequently performed. Secondary antibodies labelled with alkaline phosphatase (ALP) or horseradish peroxidase (HRP) were used for signal generation. Experimental parameters were firstly optimised by colorimetric ELISA on microtiter wells and on SPEs. The ELISA system was then tested by amperometry at +300 mV vs. Ag/AgCl (detection of p-aminophenol produced by the reaction of p-aminophenyl phosphate with ALP) or -200 mV vs. Ag/AgCl (detection of 5-methyl-phenazinium methyl sulfate, redox mediator in the HRP bioelectrocatalysis). The limits of detection (LODs) with standard solutions were 1.07 and 1.98 microgL(-1) when using ALP and HRP labels, respectively. An electrochemical signal amplification system based on diaphorase (DI) recycling was integrated into the ALP-based immunosensor, decreasing the LOD to 0.03 microgL(-1) and enlarging the working range by two orders of magnitude. Preliminary results with mussel and oyster extracts were obtained and compared with the colorimetric immunoassay, the colorimetric protein phosphatase inhibition assay (PPIA) and LC-MS/MS.     

Development of evanescent wave all-fiber immunosensor for environmental water analysis

A compact and portable evanescent wave all-fiber immunosensor is developed, which employs a novel single-multi-mode fiber optic coupler for exciting and collecting fluorescence emission from the fiber optic probe. Combination tapered fiber probes are produced by tube-etching method and the best tapered ratio of the probe determined is approximately 0.37. Calibration curves obtained for 2,4-dichlorophenoxyacetic acid (2,4-D) and Microcystin-LR (MC-LR) have detection limits of 0.09 microgL(-1)and 0.03 microgL(-1), respectively. The 50% inhibition concentration (IC(50)) for MC-LR and 2,4-D were 1.12+/-0.01 microgL(-1)and 3.81+/-0.03 microgL(-1), respectively. A reusable immunosurface is provided via the covalent attachment of the analyte derivative to a self-assembled monolayer formed onto the fiber optic probe. The regeneration of the sensor surface allows the performance of more than 100 assay cycles within an analysis time of about 20 min for each assay cycle.     

Magnetic beads-based electrochemical immunosensor for monitoring allergenic food proteins

Screen-printed platinum electrodes as transducer and magnetic beads as solid phase were combined to develop a particle-based electrochemical immunosensor for monitoring the serious food allergen ovalbumin. The standard arrangement of enzyme-linked immunosorbent assay became the basis for designing the immunosensor. A sandwich-type immunocomplex was formed between magnetic particles functionalized with specific anti-ovalbumin immunoglobulin G and captured ovalbumin molecules, and secondary anti-ovalbumin antibodies conjugated with the enzyme horseradish peroxidase were subsequently added as label tag. The electrochemical signal proportional to the enzymatic reaction of horseradish peroxidase during the reduction of hydrogen peroxide with thionine as electron mediator was measured by linear sweep voltammetry. The newly established method of ovalbumin detection exhibits high sensitivity suitable for quantification in the range of 11 to 222 nM and a detection limit of 5 nM. Magnetic beads-based assay format using external magnets for rapid and simple separation has been proven to be an excellent basis for electrochemical detection and quantification of food allergens in highly complex sample matrices.     

Three-dimensional interdigitated electrode array as a transducer for label-free biosensors

A new transducer for biosensor applications has been developed based on a three-dimensional interdigitated electrode array (IDEA) with electrode digits separated by an insulating barrier. Binding of molecules to a chemically modified surface of the transducer induces important changes in conductivity between the electrodes. Three-dimensional sensor shows considerable improvement compared with a standard planar IDEA design. The potential of the developed device as a sensor transducer to detect immunochemical and enzymatic reactions, as well as DNA hybridization events is demonstrated. The immunosensor allows direct detection of the antibiotic sulfapyridine and shows the IC(50) parameter value of 5.6 microgL(-1) in a buffer. Immunochemical determination occurs under competitive configurations and without the use of any label. Each modified sensor is of a single use. Nevertheless, biochemical reagents can be easily cleaned off the sensor surface for its reuse. Layer-by-layer method of used to deposit polyethyleneimine and glucose oxidase showed that the sensor is also highly effective for detecting single and multilayered molecular assemblies.     

Sensitive electrochemical immunosensor for cancer biomarker with signal enhancement based on nitrodopamine-functionalized iron oxide nanoparticles

A novel electrochemical immunosensor for sensitive detection of cancer biomarker prostate specific antigen (PSA) based on nitrodopamine (NDA) functionalized iron oxide nanoparticles (NDA-Fe(3)O(4)) is described. NDA-Fe(3)O(4) was used both for the immobilization of primary anti-PSA antibody (Ab(1)) and as secondary anti-PSA antibody (Ab(2)) label. For the preparation of the label, mediator thionine (TH) was first conjugated onto NDA-Fe(3)O(4) based on the amino groups of NDA, and then the amino group of TH was used to immobilize horseradish peroxidase (HRP) and Ab(2). Due to the high amount of NDA anchored onto Fe(3)O(4) surface, the loading of antibodies as well as mediator and enzyme onto NDA-Fe(3)O(4) was substantially increased, which increased the sensitivity of the immunosensor. The resulting immunosensor displayed a wide range of linear response (0.005-50 ng/mL), low detection limit (4 pg/mL), good reproducibility and stability. The immunosensor was used to detect the PSA contents in serum samples with satisfactory results.     

Electrochemiluminescence of peroxydisulfate enhanced by L-cysteine film for sensitive immunoassay

A novel label free electrochemiluminescence (ECL) immunosensor based on the ECL of peroxydisulfate solution for detection of α-1-fetoprotein (AFP) has been developed. For this proposed immunosensor, L-cysteine was firstly electrodeposited on the gold electrode surface, which promoted the electron transfer and largely enhanced the ECL of peroxydisulfate solution. Subsequently, gold nanoparticles (nano-Au) were assembled onto the L-cysteine film modified electrode to improve the absorption capacity of antibody and further amplify the ECL signal. Then, antibody was immobilized onto the electrode through nano-Au. At last bovine serum albumin (BSA) was employed to block the nonspecific binding sites. As a result, a novel ECL immunosensor was firstly obtained by applying the ECL of peroxydisulfate solution without conventional luminescent reagents. The AFP was determined in the range of 0.01-100 ng mL(-1), with a low detection limit of 3.3 pg mL(-1) (S/N=3). The proposed ECL immunosensor provides a rapid, simple, and sensitive immunoassay protocol for protein detection, which might hold a promise for clinical application. Moreover, this work would open up a new field in the application of peroxydisulfate solution ECL for highly sensitive bioassays.     

Label-free capacitive immunosensor for microcystin-LR using self-assembled thiourea monolayer incorporated with Ag nanoparticles on gold electrode

A label-free immunosensor based on a modified gold electrode incorporated with silver (Ag) nanoparticles (NPs) to enhance the capacitive response to microcystin-LR (MCLR) has been developed. Anti-microcystin-LR (anti-MCLR) was immobilized on silver nanoparticles bound to a self-assembled thiourea monolayer. Interaction of anti-MCLR and MCLR were directly detected by capacitance measurement. Under optimum conditions, MCLR could be determined with a detection limit of 7.0pgl(-1) and linearity between 10pgl(-1) and 1mugl(-1). The immobilized anti-MCLR on self-assembled thiourea monolayer incorporated with silver nanoparticles was stable and good reproducibility of the signal could be obtained up to 43 times with an R.S.D. of 2.1%. Comparing to the modified electrode without silver nanoparticles it gave 1.7-fold higher sensitivity and lower limit of detection. The developed immunosensor was applied to analyze MCLR in water samples and the results were in good agreement with those obtained by high-performance liquid chromatography (HPLC) (P<0.05).     

Sensitive immunosensor for tumor necrosis factor α based on dual signal amplification of ferrocene modified self-assembled peptide nanowire and glucose oxidase functionalized gold nanorod

Sensitive electrochemical immunosensor for the detection of protein biomarker tumor necrosis factor α (TNF-α) was reported that uses ferrocene carboxylic acid (Fc) functionalized self-assembled peptide nanowire (Fc-PNW) as sensor platform and glucose oxidase (GOx) modified gold nanorod (GNR) as label. Greatly enhanced sensitivity is achieved based on a dual signal amplification strategy: first, the synthesized Fc-PNW used as the sensor platform increased the loading of primary anti-TNF-α antibody (Ab(1)) onto electrode surface due to its large surface area. At the same time, the Fc moiety on the nanowire is used as a mediator for GOx to catalyze the glucose reaction. Second, multiple GOx and secondary anti-TNF-α antibody (Ab(2)) molecules are bounded onto each GNR to increase the sensitivity of the immunosensor. After the preparation of the immunosensor based on the traditional sandwich protocol, the response of the immunosensor towards glucose was used as a signal to differentiate various concentrations of TNF-α. The resulting immunosensor has high sensitivity, wide linear range (0.005-10ng/mL) and good selectivity. This immunosensor preparation strategy is a promising platform for clinical screening of protein biomarkers.     

Highly amplified electrochemiluminescence of peroxydisulfate using bienzyme functionalized palladium nanoparticles as labels for ultrasensitive immunoassay

An immunosensor based on the electrochemiluminescence (ECL) of peroxydisulfate was firstly proposed by coupling the cooperation of two enzymes to in situ generate coreactant with palladium nanoparticles (PdNPs) as catalyst for the ECL reaction. PdNPs were previously synthesized, which successfully attached to functional carbon nanotubes (FCNTs), to bind the secondary antibody and bienzyme (horseradish peroxidase and glucose oxidase). Then the prepared bioconjugates were introduced to the electrode via sandwich immunoreactions. Accordingly, a dramatically amplified ECL signal was obtained for that GOD catalyzed glucose to produce H(2)O(2) which was subsequently reduced by HRP to in situ generate O(2), then PdNPs as catalyst for the ECL reaction of peroxydisulfate/O(2). The present immunosensor was used to detect α-1-fetoprotein (AFP) and showed a wide linear range of 1×10(-5)-100ngmL(-1), with a low detection limit of 3.3fgmL(-1)(S/N=3). This new signal amplification strategy for preparation of the ECL immunosensor could be easily realized and has a potential application in ultrasensitive bioassays.     

Disposable and integrated amperometric immunosensor for direct determination of sulfonamide antibiotics in milk

The preparation and performance of a disposable amperometric immunosensor, based on the use of a selective capture antibody and screen-printed carbon electrodes (SPCEs), for the specific detection and quantification of sulfonamide residues in milk is reported. The antibody was covalently immobilized onto a 4-aminobenzoic acid (4-ABA) film grafted on the disposable electrode, and a direct competitive immunoassay using a tracer with horseradish peroxidase (HRP) for the enzymatic labeling was performed. The amperometric response measured at -0.2 V vs the silver pseudo-reference electrode of the SPCE upon the addition of H(2)O(2) in the presence of hydroquinone (HQ) as mediator was used as transduction signal. The developed methodology showed very low limits of detection (in the low ppb level) for 6 sulfonamide antibiotics tested in untreated milk samples, and a good selectivity against other families of antibiotics residues frequently detected in milk and dairy products. These features, together with the short analysis time (30 min), the simplicity, and easy automation and miniaturization of the required instrumentation make the developed methodology a promising alternative in the development of devices for on-site analysis.     

An amplified mass piezoelectric immunosensor for Schistosoma japonicum

An ultrasensitive piezoelectric immunosensor using an amplification path based on an insoluble biocatalyzed precipitation product has proposed for Schistosoma japonicum. A mercapto Schistosoma japonicum antigen was self-assembled onto the quartz crystal surface via an Au nanoparticle mediator monolayer to sense the Schistosoma japonicum antibody (SjAb). And the horseradish peroxidase labeled protein A conjugate which was bounded to the SjAb by a "sandwich" format was used as a biocatalyst for the oxidative precipitation of 4-chloro-1-naphthol by H(2)O(2) to yield the insoluble product benzo-4-chlorohexadienone, resulting in an amplified mass sensing of antigen-antibody interaction. The amount of the precipitate accumulated on the quartz crystal is controlled by the antibody concentration. The SjAb can be linearly determined in the range of 10-200 ngml(-1) and the detection limit reaches as low as 5 ngml(-1).     

Sensitive sandwich electrochemical immunosensor for alpha fetoprotein based on prussian blue modified hydroxyapatite

A sandwich electrochemical immunosensor for the sensitive determination of alpha fetoprotein (AFP) has been fabricated. Prussian blue modified hydroxyapatite (PB@HAP) was firstly prepared and used as electrochemical label due to the wonderful conductivity and good biocompatibility of HAP. The results proved that the immunosensor fabricated using the label based on PB@HAP loaded with horse radish peroxidase (HRP) and secondary anti-AFP antibody (Ab(2)) (PB@HAP-HRP-Ab(2)) had high sensitivity, and the sensitivity of the label PB@HAP-HRP-Ab(2) was much higher than labels of PB@HAP-Ab(2), PB-HRP-Ab(2) and HAP-HRP-Ab(2). The mixture of graphene sheet (GS) and thionine (TH) was not only used to immobilize anti-AFP antibody (Ab(1)) but also took part in the signal amplification. The amperometric signal increased linearly with AFP concentration in the range of 0.02-8 ng/mL with a low detection limit of 9 pg/mL. The immunosensor had the advantages of high sensitivity, good selectivity and good stability, and was applied to the analysis of AFP in serum sample with satisfactory results. Due to the low-cost and easy synthesis of PB@HAP, the screen-printed electrodes could be used instead of the bare glass carbon electrode in order to achieve mass production. In addition, it had potential application in the detection of other tumor markers.     

A highly sensitive flow-through amperometric immunosensor based on the Peroxidase chip and enzyme-channeling principle

A concept based on the Peroxidase-chip (P-chip), antibody co-immobilization, competitive and enzyme-channeling principle was exploited to develop an integrated flow-through amperometric biosensor for detection of environmental pollutants such as s-triazine herbicides. In this concept, recombinant peroxidase is immobilized on the gold electrode (P-chip) in such a way that direct electron transfer is achieved. The recognition and quantitation the target analyte is realized through the competition between the simazine-glucose oxidase (GOD) conjugate and free simazine for the binding sites of the monoclonal antibody co-immobilized with peroxidase on the gold electrode. The arrangement allows to generate a specific signal in the presence of glucose through the channeling of H2O2 produced by GOD conjugate bound to the antibody. The immunosensor exhibited 50% signal decrease (IC50 value) at approximately 0.02 microg l(-1). A concentration of 0.1 ng l(-1) gave a signal clearly distinguishable from the blank whereas the ELISA using the same antibody had a typical detection limit of about 1 microg l(-1), which is four orders of magnitude higher compared to the presented biosensor system. The results demonstrated that gene engineering biomolecules, in this case recombinant peroxidase, might be attractive reagents for the development of electrochemical immunosensors.     

An impedimetric immunosensor based on interdigitated microelectrodes (IDmicroE) for the determination of atrazine residues in food samples

A novel impedimetric immunosensor for atrazine detection has been developed. The immunosensor is based on an array of interdigitated micro-electrodes (IDmicroE) and immunoreagents specifically developed to detect this pesticide. Immunochemical determination of atrazine is possible without the use of any label. An atrazine-haptenized protein was covalently immobilized on the surface of the interdigitated mu-electrodes area (interdigits space) previously activated with (3-glycidoxypropyl)trimethoxysilane. Before, the gold electrodes were blocked using N-acetylcysteamine to prevent non-specific adsorptions. All biofunctionalization steps were characterized by chemical affinity methods and impedance spectroscopy. Immunosensors measures are made by exposing the sensor to solutions containing a mixture of the analyte and the specific antibody. With this configuration, the immunosensor detects atrazine with a limit of detection of 0.04 microg L(-1) without the use of any label. The potential of the immunosensor to analyze pesticide residues in complex sample matrices, such as red wine, has been evaluated. The results shown that after solid-phase extraction atrazine can be determined in this type of sample with a limit of detection of 0.19 microg L(-1), far below the Maximum Residue Level (MRL) established by EC for residues of this herbicide in wine.     

Bi-enzyme synergetic catalysis to in situ generate coreactant of peroxydisulfate solution for ultrasensitive electrochemiluminescence immunoassay

A novel electrochemiluminescence (ECL) immunosensor for ultrasensitive detection of α-1-fetoprotein (AFP) was designed based on the in situ bi-enzymatic reaction to generate coreactant of peroxydisulfate for signal amplification. In this work, AuNPs were electrodeposited on the glassy carbon electrode (GCE) surface, which promoted the electron transfer. Then, L-cysteine and another layer of AuNPs were, respectively assembled onto the modified electrode surface, which formed the multilayer films for amplifying the ECL signal of peroxydisulfate and immobilizing antibody. At last, glucose oxidase (GOD) and horseradish peroxidase (HRP) were employed to block the nonspecific binding sites. When proper amounts of glucose were added in the detection solution, GOD catalyzed the oxidation of glucose to generate H(2)O(2), which could be further catalyzed by HRP to generate O(2) for the signal amplification. The linear range for AFP detection was 0.001-100 ng mL(-1), with a low detection limit of 3.3 × 10(-4) ng mL(-1). The novel strategy has the advantages of simplicity, sensitivity, good selectivity and reproducibility which might hold a new promise for highly sensitive bioassays applied in clinical detection.     

Ultrasensitive electrochemical strategy for NT-proBNP detection with gold nanochains and horseradish peroxidase complex amplification

A novel electrochemical immunosensor for sensitive detection of cardiac biomarker N-terminal pro-B-type natriuretic peptide (NT-proBNP) is fabricated based on the nanostructural gold and carbon nanotubes composite as desirable platform for the capture antibodies immobilization and gold nanochains (AuNCs) and horseradish peroxidase (HRP) complex labeled secondary antibodies (AuNCs-HRP-Ab(2)) for signal amplification. The gold nanochains were prepared by the employment of L-ascorbic acid (AA) as a mediator and template. With the surface area enhancement by nanostructural gold functionalized carbon nanotubes composite, the amount of immobilized primary antibodies (Ab(1)) can be enhanced. More importantly, enhanced sensitivity can be achieved by introducing the multibioconjugates of AuNCs-HRP-Ab(2) onto the electrode surface through "sandwich" immunoreactions. The linear range extended from 0.02 to 100 ng/mL with a correlation coefficient of R=0.997 and a limit of detection reaching 6 pg/mL at a signal-to-noise ratio of 3:1, which is well below the commonly accepted concentration threshold (0.1 ng/mL) used in clinical diagnosis. The specificity, regeneration and stability test demonstrated the feasibility of the developed immunoassay, which gives the attractive characteristics to be a candidate for the detection of NT-proBNP and other proteins of interest in both fundamental and applied research.     

A disposable two-throughput electrochemical immunosensor chip for simultaneous multianalyte determination of tumor markers

A disposable two-throughput immunosensor array was proposed for simultaneous electrochemical determination of tumor markers. The low-cost immunosensor array was fabricated simply using cellulose acetate membrane to co-immobilize thionine as a mediator and two kinds of antigens on two carbon electrodes of a screen-printed chip, respectively. With two simultaneous competitive immunoreactions the corresponding horseradish peroxidase (HRP) labeled antibodies were captured on the membranes, respectively, on which the immobilized thionine shuttled electrons between HRP and the electrodes for enzymatic reduction of H2O2 to produce detectable signals. The electrochemical and electronic cross-talks between the electrodes could be avoided, which was beneficial to the miniaturization of the array without considering the distance between immunosensors. Under optimal conditions the immunosensor array could be used for fast simultaneous electrochemical detection of CA 19-9 and CA 125 with the limits of detection of 0.2 and 0.4 U/ml, respectively. The serum samples from clinic were assayed with the proposed method and the results were in acceptable agreement with the reference values. The proposed method for preparation of immunosensor array could be conveniently used for fabrication of disposable electrochemical biochip with high throughput and possessed the potential of mass production and commercialization.     

A chemiluminescence flow immunosensor based on a porous monolithic metacrylate and polyethylene composite disc modified with protein G

A generic, fast, sensitive and new type of flow immunosensor has been developed. The basis is a monolithic porous poly(glycidyl methacrylate-co-trimethylolpropane trimethacrylate) polymer disc modified with protein G, placed in a fountain type flow cell compartment, in close proximity to a photomultiplier tube (PMT). Analyte and HRP labelled analyte derivative (tracer) compete for anti-analyte antibody binding sites. The mixture is then injected into the flow immunosensor system where the formed analyte- and tracer-antibody complexes are trapped by the monolithic protein G disc. The amount of bound tracer, inversely related to the concentration of analyte in the sample, is determined in a second step by injection of luminol, p-iodophenol and H2O2, generating enhanced chemiluminescence (CL) with horseradish peroxidase (HRP). A third and final step is need for regeneration of the protein G disc so that a new analysis cycle can take place. The performance of the disc immunosensor system was compared with a one step continuous flow injection immunoassay (FIIA) system, using the same reagents and a protein G column, in terms of assay sensitivity and influence of matrix effects from various water samples (millipore-, tap- and surface water). The detection limit for the analyte atrazine in PBS and surface water (SW) was 0.208 +/- 0.004 microg l(-1) (PBS) and 0.59 +/- 0.120 microg l(-1) (SW) for the FIIA and 0.033 +/- 0.003 microg l(-1) (PBS) and 0.038+/-0.003 microg l(-1) (SW) for the disc immunosensor. Statistical comparison of the two systems shows that the disc immunosensor results were significantly less influenced by the sample matrix, which is explained by the fact that the sample in the FIIA arrives simultaneously with the matrix to the detector, whereas these are separated in time in the disc immunosensor system.     

Highly sensitive amperometric immunosensors for microcystin detection in algae

The presence of cyanobacterial toxins in water and algae pose a health hazard for animals and humans, due to their tumour-promoting activity and carcinogen effects. The use of simple, rapid and reliable tools for routine analysis is becoming a necessity. With this purpose, our group has developed two electrochemical immunosensors for the detection of microcystin-LR (MC-LR) based on the affinity between this cyanotoxin and the corresponding monoclonal and polyclonal antibodies. A competitive direct enzyme-linked immunosorbent assays (ELISAs) was designed and, after validation of the approach on microtiter wells, screen-printed graphite electrodes were used as supports. Colorimetry was used to optimise the experimental parameters and to compare the performance of monoclonal and polyclonal antibodies. Afterwards, electrochemical measurements were performed at -200 mV (versus Ag/AgCl) using 5-methyl-phenazinium methyl sulfate (MPMS) as mediator for horseradish peroxidase (HRP), the enzymatic label of the competitor. The IC(50) values were 0.10 and 1.73 microgL(-1) for MAb and PAb, respectively. Whereas Mab provided higher sensitivities, the reproducibility was better when using PAb. The developed amperometric immunosensors were applied to the analysis of cyanobacterial samples from the Tarn River (Midi-Pyrénées, France) and the presence of MC was confirmed by the colorimetric protein phosphatase inhibition (PPI) assay and high performance liquid chromatography (HPLC). The limits of detection attained from the calibration curves and the results obtained for the real samples demonstrate the potential use of the immunosensors as screening tools for routine use in the assessment of water quality and the control of toxins in algae.     

Label-free electrochemical immunosensor based on graphene/methylene blue nanocomposite

For the specificity of prostate cancer markers, prostate specific antigen (PSA) has been widely used in prostate cancer screening, diagnosis, and treatment after monitoring. In normal male serum, PSA can only be detected in traces of 0-4 ng mL(-1). In this paper, we constructed an electrochemical immunosensor for PSA detection using a nanocomposite film of graphene sheets-methylene blue-chitosan (GS-MB-CS) as electrode material. The nanocomposite film showed high binding affinity to the electrode and was used to immobilize the antibody of PSA. The modification procedure was monitored by cyclic voltammetry (CV). An amperometric biosensor was easily developed based on the response of peak current to the capture of PSA induced by specific antigen-antibody reactions. Under optimum conditions, the amperometric signal decreased linearly with PSA concentration (0.05-5.00 ng mL(-1)). A low limit of detection (13 pg mL(-1)) and a high selectivity are obtained. Moreover, the prepared immunosensor was applied for the analysis of PSA in serum samples with satisfactory results. The proposed method may have a promising future in biochemical assays for high selectivity, good reproducibility, and stability.