Single nucleotide polymorphism genotyping of aldehyde dehydrogenase 2 gene using a single bacterial magnetic particle

A single nucleotide polymorphism (SNP) genotyping for aldehyde dehydrogenase 2 gene (ALDH2) has been developed by using a nano-sized magnetic particle, which was synthesized intracellularly by magnetic bacteria. Streptavidin-immobilized on bacterial magnetic particles (BMPs) were prepared using biotin labeled cross-linkers reacting with the amine group on BMPs. ALDH2 fragments from genomic DNA were amplified using a TRITC labeled primer and biotin labeled primer pair, and conjugated onto BMP surface by biotin-streptavidin interaction. PCR product-BMP complex was observed at a single particle level by fluorescence microscopy. These complexes were treated with restriction enzyme, specifically digesting the wild-type sequence of ALDH2 (normal allele of ALDH2). The homozygous (ALDH2*1/*1), heterozygous (ALDH2*1/*2), and mutant (ALDH2*2/*2) genotypes were discriminated by three fluorescence patterns of each particle. SNP genotyping of ALDH2 has been successfully achieved at a single particle level using BMP.     

A sensitive enzyme assay for biotin, avidin, and streptavidin

Reciprocal enzyme assays are described for the vitamin biotin and for the biotin-binding proteins avidin and streptavidin. The assays are based on the following steps: (a) biotinylated bovine serum albumin is adsorbed onto microtiter plates; (b) streptavidin (or avidin) is bound to the biotin-coated plates; (c) biotinylated enzyme (in this case alkaline phosphatase) is then interacted with the free biotin-binding sites on the immobilized protein. For biotin assay, competition between the free vitamin and the biotinylated enzyme is carried out between steps (b) and (c). The method takes advantage of the four biotin-binding sites which characterize both avidin and streptavidin. The method is extremely versatile and accurate over a concentration range exceeding three orders of magnitude. The lower limits of detection are approximately 2 pg/ml (0.2 pg/sample) for biotin and less than 100 ng/ml (10 ng/sample) for either avidin or streptavidin.     

Colorimetric competitive inhibition method for the quantification of avidin, streptavidin and biotin.

A colorimetric competitive inhibition assay for avidin, streptavidin and biotin was developed. The method for avidin or streptavidin was based on the competitive binding between avidin or streptavidin and a streptavidin-enzyme conjugate for biotinylated dextrin immobilized on the surface of a microtitre plate. For biotin quantitation the competition is between free biotin and the immobilized biotin for the streptavidin-enzyme conjugate. The limits of detection which was determined as the concentration of competitor required to give 90% of maximal absorbency (100% inhibition) was approximately 20 ng/100 microl per assay for avidin and streptavidin and 0.4 pg/100 microl per assay for biotin. The methods are simple, rapid, highly sensitive and adaptable to high throughput analysis.     

Integrating the QCM detection with magnetic separation for on-line analysis

We investigate the feasibility of coupling the quartz crystal microbalance (QCM) with magnetic separation for on-line analysis. A flow cell was integrated with QCM and magnetic force for the analysis of magnetic and nonmagnetic samples. The resonant frequency change (Deltaf) of QCM was related to the amount of deposited magnetic nanoparticles. This experiment demonstrates that QCM can be used as an on-line detector for magnetic separation. The QCM also gives a characteristic response of the binding between the streptavidin and biotin labeled on the magnetic nanoparticles. Biotin-labeled magnetic nanoparticles were flowed through a gold electrode of QCM to deposit as a matrix for selective capturing streptavidin. The resonant frequency change of QCM was proportional to the amounts of streptavidin captured by biotin. This technique can provide a simple, economic, and automatic method for on-line detection of biomarkers.     

Rapid detection and identification of biological and chemical agents by immunoassay, gene probe assay and enzyme inhibition using a silicon-based biosensor

A rapid biosensor assay procedure that utilizes biotin streptavidin mediated filtration capture onto nitrocellulose membrane, in conjunction with a silicon-based light-addressable potentiometric sensor (LAPS) was developed for detection and identification of biological and chemical threat agents. Sandwich immunoassays, nucleic acid hybridization assays and enzyme inhibition assays are described. For immunoassays, the lower limits of detection (LOD) per 100-microl sample were approximately 5 pg/ml for protein (Staphylococcal enterotoxin B), 2 ng/ml for virus (Newcastle disease virus), and 20 ng/ml for vegetative bacteria (Brucella melitensis). In a dual gene probe assay format, the LOD was 0.30 fmol (1.8 x 10(8) copies per 60-microl) of single stranded target DNA. Enzyme inhibition assays on the LAPS using acetylcholinesterase were able to detect soman and sarin in aqueous samples at 2 and 8 pg (100 and 600 pM), respectively. The assays were easy to perform and required a total time equal to the reaction period plus about 15 min for filtering, washing and sensing. The assay format is suitable for detection of a wide range of infectious and toxic substances. New assays can be developed and optimized readily, often within 1 or 2 days.     

Detection of biomolecular interaction between biotin and streptavidin on a self-assembled monolayer using magnetic nanoparticles

For developing a magnetic bioassay system, an investigation to determine the presence of a specific biomolecular interaction between biotin and streptavidin was done using magnetic nanoparticles and a silicon substrate with a self-assembled monolayer. Streptavidin was immobilized on the magnetic particles, and biotin was attached to the monolayer-modified substrate. The reaction of streptavidin-modified magnetic particles on the biotin-modified substrate was clearly observed under an optical microscope. The magnetic signals from the particles were detected using a magnetic force microscope. The results of this study demonstrate that the combination of a monolayer-modified substrate with biomolecule-modified magnetic particles is useful for detecting biomolecular interactions in medical and diagnostic analyses.     

Effects of particle characteristics on magnetic immunoassay in a thin channel

The effects of size and porosity of particles on magnetic immunoassay in a thin channel were studied. Experimental parameters were investigated and compared using a model immunoassay complex of carcinoembryonic antigen (CEA)/anti-CEA. The rate constant for the affinity reaction between functional particles increased as the size of magnetic nanoparticles (800-80 nm) decreased. The affinity reaction between functional particles had no significant effect on the sizes of microparticles (1.0-4.4 μm) at commonly used thin channel flow-rates of 0.001-0.025 ml/min. Competitive and sandwich reactions of CEA/anti-CEA were studied for CEA detection. Microparticles of different porosities produced similar linear ranges of detection and limits of detection. The limits of detection for CEA were 0.29 pg/ml and 0.21 pg/ml for competitive and sandwich reactions, respectively. The linear ranges of detection were from 0.49 pg/ml to 4.9 ng/ml for both competitive and sandwich reactions. The detection limits were lower, and the linear ranges were wider than those of literature. There was a 9% difference in CEA detection measurements between competitive and sandwich magnetic immunoassay. The measurements of two magnetic immunoassays differed by less than 13% from the ELISA reference measurements. The running time was less than 30 min. Magnetic immunoassay in a thin channel has great potential for biochemical analysis and immunoassay-related applications.     

Fluorescent detection of cyanobacterial DNA using bacterial magnetic particles on a MAG-microarray

Bacterial magnetic particles (BMPs) were used for the identification of cyanobacterial DNA. Genus-specific oligonucleotide probes for the detection of Anabaena spp., Microcystis spp., Nostoc spp., Oscillatoria spp., and Synechococcus spp. were designed from the variable region of the cyanobacterial 16S rDNA of 148 strains. These oligonucleotide probes were immobilized on BMPs via streptavidin-biotin conjugation and employed for magnetic-capture hybridization against digoxigenin-labeled cyanobacterial 16S rDNA. Bacterial magnetic particles were magnetically concentrated, spotted in 100-microm-size microwell on MAG-microarray, and the fluorescent detection was performed. This work details the development of an automated technique for the magnetic isolation, the concentration of hybridized DNA, and the detection of specific target DNA on MAG-microarray. The entire process of hybridization and detection was automatically performed using a magnetic-separation robot and all five cyanobacterial genera were successfully discriminated.     

Magnetic nanoparticle-based immunosensor for electrochemical detection of hepatitis B surface antigen

An electrochemical immunosensor was developed for the detection of hepatitis B surface antigen (HBsAg). The biotinylated hepatitis B surface antibody was immobilized on streptavidin magnetic nanoparticles and used for targeting the HBsAg. By the addition of horseradish peroxidase conjugated with secondary antibody (HRP–HBsAb), a sandwich-type immunoassay format was formed. Aminophenol as substrate for conjugated HRP was enzymatically changed into 3-aminophenoxazone (3-APZ). This electroactive enzymatic production (3-APZ) was transferred into an electrochemical cell and monitored by cyclic voltammetry. Under optimal conditions, the cathodic current response of 3-APZ, which was proportional to the HBsAg concentration, was measured by a glassy carbon electrode. The immunosensor response was linear toward HBsAg in the concentration range from 0.001 to 0.015 ng/ml with a detection limit of 0.9 pg/ml at a signal/noise ratio of 3.     

Quantitative detection of single molecules using enhancement of Dye/DNA conjugate-labeled nanoparticles

An ultrasensitive fluorescence immunoassay method for quantitative detection of single molecules is developed on the basis of counting single magnetic nanobeads (MNBs) with combined amplification of DNA and dye/DNA conjugate. Highly amplified fluorescence signal and low background signal are achieved by using mutilabel bioconjugates made by linking multiple dye/DNA conjugates to streptavidin-coated magnetic nanobeads (SA-MNBs) and magnetic separation. In this method, human IgG (Ag) is captured on the silanized glass substrate surface, followed by immunoreaction with biotinylated mouse antihuman antibody (BT-Ab). Then, SA-MNBs are attached to the BT-Ab through the biotin/streptavidin interaction at a ratio of 1:1. Subsequently, a 30 base pair double-stranded oligonucleotide terminated with biotin (BT-dsDNA) is conjugated to the SA-MNBs. The resultant Ag-BT-Ab-SA-MNBs/BT-dsDNA/SYBR Green I is achieved after a fluorescent DNA probe, SYBR Green I, is added to the substrate and bound to the oligonucleotide at high ratios. Finally, epifluorescence microscopy coupled with a high-sensitivity electron multiplying charge-coupled device is employed for human IgG fluorescence imaging and detection. The number of fluorescent spots corresponding to single protein molecules on the images is counted. It is found that the number of fluorescent spots resulting from the SA-MNBs/BT-dsDNA/SYBR Green I immuotargeted on the glass slides is correlated with the concentration of human IgG target antigen in the range 3.0-50 fM.     

Determination of diethylstilbestrol based on biotin–streptavidin‐amplified time‐resolved fluoro‐immunoassay

A rapid and sensitive time‐resolved fluoroimmunoassay (TR–FIA) based on the biotin–streptavidin amplification system was developed for the determination of diethylstilbestrol (DES). Europium‐labelled streptavidin derivatives combined with europium and anhydride of diethylene triamine penta‐acetic acid were used to label streptavidin; biotin was coupled with goat anti‐rabbit IgG to form a biotin–goat anti‐rabbit IgG bridge between streptavidin–europium and the anti‐DES antibody in the immunoassay. The DES assay was carried out by measuring the fluorescence of Eu³⁺–SA at 615 nm. The presented method produced a wide linear range, 0.001–1000.0 ng/mL, and a detection limit up to 0.81 pg/mL for DES. The method was applied to determine DES in serum samples, with recoveries of 97.4–107.8% and RSD 1.32–4.04%. The assay results by the present method showed that biotin–streptavidin amplified TR–FIA for DES detection; it may offer high sensitivity and promising alternative special methods in biological samples. Copyright © 2011 John Wiley & Sons, Ltd.     

Binding of streptavidin with biotinylated thermosensitive nanospheres based on poly(N,N-diethylacrylamide-co-2-hydroxyethyl methacrylate)

Thermosensitive polymer nanospheres based on N,N-diethylacrylamide and 2-hydroxyethyl methacrylate (HEMA) have been prepared, characterized, and conjugated with biotin. The thermosensitivity of poly(N,N-diethylacrylamide) was enhanced by the incorporation of HEMA up to about 40 mol %. Atomic force microscopic images show that these particles can be closely packed even without the surface charges as in the latex particles. Biotinylation reduces the thermosensitivity of the copolymer nanospheres. The biotinylated hydrogel nanospheres showed a reduction in size upon binding with streptavidin, indicating the formation of a less hydrophilic conjugate. No aggregation of the biotinylated particles due to the cross-linking effect of streptavidin was observed. This size change could be reversed by the addition of free biotin to the system. The interaction is specific, and no such changes were observed when streptavidin was replaced by bovine serum albumin.     

Capture and release of DNA using aminosilane-modified bacterial magnetic particles for automated detection system of single nucleotide polymorphisms

Bacterial magnetic particles (BMPs) were modified with 3-[2-(2-aminoethylamino)-ethylamino]-propyltrimethoxysilane (AEEA) to produce a dense amine surface. Modification of BMPs in a toluene solution resulted in an increased amine yield, and approximately 11.3 x 10(4) surface amines were detected on a single particle. The modified BMPs were capable of efficient electrostatic capture of DNA. The maximum amount of DNA captured on 10 microg of aminosilane-modified BMPs was 600 ng. A 10 mM phosphate buffer effectively released the captured DNA. This efficiency was dramatically enhanced by incubation at 80 degrees C and DNA recovery from aminosilane-modified BMPs approached 95%. DNA extraction from whole blood using these modified BMPs, followed by PCR, was successfully performed. Furthermore, automated single nucleotide polymorphism (SNP) detection of the aldehyde dehydrogenase 2 (ALDH2) was demonstrated.     

SNP detection in transforming growth factor-beta1 gene using bacterial magnetic particles

A single nucleotide polymorphism (SNP) within the transforming growth factor-beta1 (TGF-beta1) gene was detected by hybridization-based method using bacterial magnetic particles (BMPs). TGF-beta1 is commonly associated with a single base change resulting in a Leu(10)-->Pro (T(869)-->C) polymorphism and is a genetic marker for susceptibility to osteoporosis. Short (9 bases) and specific probes were designed to detect SNP in TGF-beta1. Detection probes were immobilized on BMPs using cross-linking reagents. TGF-beta1 PCR products (139 bp) were labeled with the fluorescent dye coumarin and hybridized with detection probes on BMPs. Complementary hybridized targets gave over four times higher fluorescent intensities, compared with one base mismatched hybridizations. The SNP genotype was successfully discriminated using this technique.     

16S rRNA-Targeted identification of cyanobacterial genera using oligonucleotide-probes immobilized on bacterial magnetic particles

16S rRNA-targeted identification of cyanobacterial genera, Anabaena,Microcystis, Nostoc, Oscillatoria, Synechococcus wasdeveloped using bacterial magnetic particles (BMPs). 16S rRNA-targetedcapture probes designed from the genus specific region of the 16S rRNAsequence were immobilized on BMPs. Identification of cyanobacteria wasperformed by a sandwich hybridization using the capture probes – BMPconjugates and a digoxigenin (DIG)-labeled detector probe complementaryto the highly conserved 16S rRNA sequence for cyanobacteria. Theluminescence intensity of the probe/target-BMP hybrids was measured afterreaction with alkaline phosphatase conjugated anti-DIG antibody. Fivespecies of cyanobacteria from five different genera were successfullydiscriminated using this magnetic capture system.     

Noncovalent Immobilization of Streptavidin on In Vitro- and In Vivo-Biotinylated Bacterial Magnetic Particles

Biotinylated magnetic nanoparticles were constructed by displaying biotin acceptor peptide (BAP) or biotin carboxyl carrier protein (BCCP) on the surface of bacterial magnetic particles (BacMPs) synthesized by Magnetospirillum magneticum AMB-1. BAP-displaying BacMPs (BAP-BacMPs) were extracted from bacterial cells and incubated with biotin and Escherichia coli biotin ligase. Then the in vitro biotinylation of BAP-BacMPs was confirmed using alkaline phosphatase-labeled antibiotin antibody. In contrast, BacMPs displaying the intact 149 residues of AMB-1 BCCP (BCCP-BacMPs) and displaying the COOH-terminal 78 residues of BCCP (BCCP78-BacMPs) were biotinylated in AMB-1 cells. The in vivo biotinylation of BCCP-BacMPs and BCCP78-BacMPs was thought to be performed by endogenous AMB-1 biotin ligase. Streptavidin was introduced onto biotinylated BacMPs by simple mixing. In an analysis using tetramethyl rhodamine isocyanate-labeled streptavidin, approximately 15 streptavidin molecules were shown to be immobilized on a single BCCP-BacMP. Furthermore, gold nanoparticle-BacMP composites were constructed via the biotin-streptavidin interaction. The conjugation system developed in this work provides a simple, low-cost method for producing biotin- or streptavidin-labeled magnetic nanoparticles. Various functional materials can be site selectively immobilized on these specially designed BacMPs. By combining the site-selective biotinylation technology and the protein display technology, more innovative and attractive magnetic nanomaterials can be constructed.     

Affinity thermoprecipitation and recovery of biotinylated biomolecules via a mutant streptavidin-smart polymer conjugate

A system has been developed for reversibly binding and thermoprecipitating biotinylated macromolecules. A high off-rate Ser45Ala (S45A) streptavidin mutant has been covalently conjugated to poly(N-isopropylacrylamide) (PNIPAAm), a temperature-responsive polymer. The resulting conjugate is shown to coprecipitate biotinylated immunoglobulin G (IgG) and a biotinylated oligonucleotide in response to a thermal stimulus. Thermally precipitated biotinylated macromolecules can be released from the S45A-PNIPAAm conjugate by simple treatment with excess free biotin. This release step has been shown to be unique to the mutant streptavidin conjugate-a conjugate of wild type (WT) streptavidin and PNIPAAm does not release bound biotinylated molecules upon treatment with excess free biotin. The capture efficiency (fraction of target molecule precipitated from solution) of the S45A-PNIPAAm conjugate is similar to that of the WT-PNIPAAm conjugate for the biotinylated IgG target molecule (near 100%), but significantly smaller for the biotinylated oligonucleotide target (approximately 60% for the S45A-PNIPAAm conjugate compared to 80% for the WT-PNIPAAm conjugate). The release efficiency (fraction of originally precipitated target molecule released after treatment with free biotin) of the S45A-PNIPAAm conjugate is 70-80% for the biotinylated IgG target and nears 100% for the biotinylated oligonucleotide target. This system demonstrates the use of a high off-rate streptavidin mutant to add reversibility to a system based on smart-polymer-streptavidin conjugates.     

Esterase 2-oligodeoxynucleotide conjugates as sensitive reporter for electrochemical detection of nucleic acid hybridization

A thermostable, single polypeptide chain enzyme, esterase 2 from Alicyclobacillus acidocaldarius, was covalently conjugated in a site specific manner with an oligodeoxynucleotide. The conjugate served as a reporter enzyme for electrochemical detection of DNA hybridization. Capture oligodeoxynucleotides were assembled on gold electrode via thiol-gold interaction. The esterase 2-oligodeoxynucleotide conjugates were brought to electrode surface by DNA hybridization. The p-aminophenol formed by esterase 2 catalyzed hydrolysis of p-aminophenylbutyrate was amperometrically determined. Esterase 2 reporters allows to detect approximately 1.5 x 10(-18)mol oligodeoxynucleotides/0.6 mm2 electrode, or 3 pM oligodeoxynucleotide in a volume of 0.5 microL. Chemically targeted, single site covalent attachment of esterase 2 to an oligodeoxynucleotide significantly increases the selectivity of the mismatch detection as compared to widely used, rather unspecific, streptavidin/biotin conjugated proteins. Artificial single nucleotide mismatches in a 510-nucleotide ssDNA could be reliably determined using esterase 2-oligodeoxynucleotide conjugates as a reporter.     

时间分辨荧光分析法在DNA探针检测中的初步应用

应用时间分辨荧光技术进行核酸杂交分析,选用自制整合剂异硫氰酸苯基-EDTA将铕离子标记连接于链霉亲和素分子中,通过光化学反应制备生物素标记pUC118DNA探针,与固定在聚苯乙烯微滴板中的靶DNA杂交后,以铕离子Eu(3+)标记的链霉亲和素为检测物,检测靶DNA的含量,可检测到30pg的靶DNA．     

Biotin interference in immunoassays based on biotin-strept(avidin) chemistry: An emerging threat

Biotinylated antibodies/antigens are currently used in many immunoassay formats in clinical settings for diversified analytes and biomarkers to offer high detection selectivity and sensitivity. Biotin cannot be synthesized by mammals and must be taken as an essential supplement. Normal intake of biotin from various foods and milk causes no effect on the streptavidin/biotin-based immunoassays. However, overconsumption of biotin (daily doses 100–300 mg) poses a significant problem for immunoassays using the biotin-strept(avidin) pair. Biotin interferences are noted in immunoassays of thyroid markers, drugs, hormones, cancer markers, the biomarker for cardiac function (β–human chorionic gonadotropin), etc. The biotin level required for serious interference in test results varies significantly from test to test and cannot easily be predicted. Immunoassay manufacturers with technologies based on strept(avidin)-biotin binding must investigate the interference from biotin (up to at least 1200 ng/mL or 4.9 μM of biotin) in various formats. There is no concrete solution to circumvent the biotin interference encountered in blood samples, short of biotin removal. Considering the short half-life of biotin in the human body, patients must stop taking biotin supplements for >48 h before the test. However, this scenario is not considered for patients in emergency situations or those with biotinidase deficiency, mitochondrial metabolic disorders or multiple sclerosis. Apparently, a rapid analytical procedure for biotin is urgently needed to quantify for its interference in immunoassays using strep(avidin)-biotin chemistry. To date, there is no quick and reliable procedure for the detection of biotin at below nanomolar levels in blood and biological samples.Traditional lab-based techniques including HPLC/MS-MS cannot process an enormous number of public samples. Biosensors with high detection sensitivity, miniaturization, low cost, and multiplexing have the potential to address this issue.