Reduced-bond tight-binding inhibitors of HIV-1 protease. Fine tuning of the enzyme subsite specificity.

Truncation of a peptide substrate in the N-terminus and replacement of its scissile amide bond with a non-cleavable reduced bond results in a potent inhibitor of HIV-1 protease. A series of such inhibitors has been synthesized, and S2-S3' subsites of the protease binding cleft mapped. The S2 pocket requires bulky Boc or PIV groups, large aromatic Phe residues are preferred in P1 and P1' and Glu in P2'. The S3' pocket prefers Phe over small Ala or Val. Introduction of a Glu residue into the P2' position yields a tight-binding inhibitor of HIV-1 protease, Boc-Phe-[CH2-NH]-Phe-Glu-Phe-OMe, with a subnanomolar inhibition constant. The relevant peptide derived from the same amino acid sequence binds to the protease with a Ki of 110 nM, thus still demonstrating a good fit of the amino acid residues into the protease binding pockets and also the importance of the flexibility of P1-P1' linkage for proper binding. A new type of peptide bond mimetic, N-hydroxylamine -CH2-N(OH)-, has been synthesized. Binding of hydroxylamino inhibitor of HIV-1 protease is further improved with respect to reduced-bond inhibitor.     

Specificity and inhibition of proteases from human immunodeficiency viruses 1 and 2

Highly purified, recombinant preparations of the virally encoded proteases from human immunodeficiency viruses (HIV) 1 and 2 have been compared relative to 1) their specificities toward non-viral protein and synthetic peptide substrates, and 2) their inhibition by several P1-P1' pseudodipeptidyl-modified substrate analogs. Hydrolysis of the Leu-Leu and Leu-Ala bonds in the Pseudomonas exotoxin derivative, Lys-PE40, is qualitatively the same for HIV-2 protease as published earlier for the HIV-1 enzyme (Tomasselli, A. G., Hui, J. O., Sawyer, T. K., Staples, D. J., FitzGerald, D. J., Chaudhary, V. K., Pastan, I., and Heinrikson, R. L. (1990) J. Biol. Chem. 265, 408-413). However, the rates of cleavage at these two sites are reversed for the HIV-2 protease which prefers the Leu-Ala bond. The kinetics of hydrolysis of this protein substrate by both enzymes are mirrored by those obtained from cleavage of model peptides. Hydrolysis by the two proteases of other synthetic peptides modeled after processing sites in HIV-1 and HIV-2 gag polyproteins and selected analogs thereof demonstrated differences, as well as similarities, in selectivity. For example, while the two proteases were nearly identical in their rates of cleavage of the Tyr-Pro bond in the HIV-1 gag fragment, Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val, the HIV-1 protease showed a 64-fold enhancement over the HIV-2 enzyme in hydrolysis of a Tyr-Val bond in the same template. Accordingly, the HIV-2 protease appears to have a different specificity than the HIV-1 enzyme; it is better able to hydrolyze substrates with small amino acids in P1 and P1', but is variable in its rate of hydrolysis of peptides with bulky substituents in these positions. In addition to these comparisons of the two proteases with respect to substrate specificity, we present inhibitor structure-activity data for the HIV-2 protease. Relative to P1-P1' statine or Phe psi [CH2N]Pro-modified pseudopeptidyl inhibitors, compounds having Xaa psi[CH(OH)CH2]Yaa inserts were found to show significantly higher affinities to both enzymes, generally binding from 10 to 100 times stronger to HIV-1 protease than to the HIV-2 enzyme. Molecular modeling comparisons based upon the sequence homology of the two enzymes and x-ray crystal structures of HIV-1 protease suggest that most of the nonconservative amino acid replacements occur in regions well outside the catalytic cleft, while only subtle structural differences exist within the active site.(ABSTRACT TRUNCATED AT 400 WORDS)     

HIV protease (HIV PR) inhibitor structure-activity-selectivity, and active site molecular modeling of high affinity Leu [CH(OH)CH2]Val modified viral and nonviral substrate analogs.

This report details the structure-activity relationships of the HIV gag substrate analog Val-Ser-Gln-Asn-Leu psi[CH(OH)CH2]Val-Ile-Val (U-85548E), an inhibitor exhibiting subnanomolar affinity towards HIV type-1 aspartic proteinase (HIV-1 PR). Our data show that the P1-P2' tripeptidyl sequence provides the minimal chemical determinant for HIV-1 PR binding. We describe the structure-activity properties of Leu psi[CH(OH)CH2]Val substitution in other peptidyl ligands of nonviral substrate origin (e.g., angiotensinogen, insulin and pepstatin). Furthermore, the aspartic proteinase selectivities of a few key compounds are summarized relative to evaluation against human renin, human pepsin, and the fungal enzyme, rhizopuspepsin. These studies have led to the rational design of nanomolar potent inhibitors of both HIV-1 and HIV-2 PR. Finally, a 2.5 A resolution X-ray crystallographic structure of U-85548E complexed to synthetic HIV-1 PR dimer (Jaskolski et al., Biochemistry 30, 1600 [1991]) provided a 3-D picture of the inhibitor bound to the enzyme active site, and we performed computer-assisted molecular modeling studies to explore the possible binding modes of the above series of Leu psi[CH(OH)CH2]Val substituted HIV-1 PR inhibitors.     

Structure at 2.5-A resolution of chemically synthesized human immunodeficiency virus type 1 protease complexed with a hydroxyethylene-based inhibitor

The crystal structure of a complex between chemically synthesized human immunodeficiency virus type 1 (HIV-1) protease and an octapeptide inhibitor has been refined to an R factor of 0.138 at 2.5-A resolution. The substrate-based inhibitor, H-Val-Ser-Gln-Asn-Leu psi [CH(OH)CH2]Val-Ile-Val-OH (U-85548e) contains a hydroxyethylene isostere replacement at the scissile bond that is believed to mimic the tetrahedral transition state of the proteolytic reaction. This potent inhibitor has Ki less than 1 nM and was developed as an active-site titrant of the HIV-1 protease. The inhibitor binds in an extended conformation and is involved in beta-sheet interactions with the active-site floor and flaps of the enzyme, which form the substrate/inhibitor cavity. The inhibitor diastereomer has the S configuration at the chiral carbon atom of the hydroxyethylene insert, and the hydroxyl group is within H-bonding distance of the two active-site carboxyl groups in the enzyme dimer. The two subunits of the enzyme are related by a pseudodyad, which superposes them at a 178 degrees rotation. The main difference between the subunits is in the beta turns of the flaps, which have different conformations in the two monomers. The inhibitor has a clear preferred orientation in the active site and the alternative conformation, if any, is a minor one (occupancy of less than 30%). A new model of the enzymatic mechanism is proposed in which the proteolytic reaction is viewed as a one-step process during which the nucleophile (water molecule) and electrophile (an acidic proton) attack the scissile bond in a concerted manner.     

Role of hydroxyl group and R/S configuration of isostere in binding properties of HIV-1 protease inhibitors.

The crystal structure of the complex between human immunodeficiency virus type 1 (HIV-1) protease and a peptidomimetic inhibitor of ethyleneamine type has been refined to R factor of 0.178 with diffraction limit 2.5 A. The peptidomimetic inhibitor Boc-Phe-Psi[CH2CH2NH]-Phe-Glu-Phe-NH2 (denoted here as OE) contains the ethyleneamine replacement of the scissile peptide bond. The inhibitor lacks the hydroxyl group which is believed to mimic tetrahedral transition state of proteolytic reaction and thus is suspected to be necessary for good properties of peptidomimetic HIV-1 protease inhibitors. Despite the missing hydroxyl group the inhibition constant of OE is 1.53 nm and it remains in the nanomolar range also towards several available mutants of HIV-1 protease. The inhibitor was found in the active site of protease in an extended conformation with a unique hydrogen bond pattern different from hydroxyethylene and hydroxyethylamine inhibitors. The isostere nitrogen forms a hydrogen bond to one catalytic aspartate only. The other aspartate forms two weak hydrogen bridges to the ethylene group of the isostere. A comparison with other inhibitors of this series containing isostere hydroxyl group in R or S configuration shows different ways of accommodation of inhibitor in the active site. Special attention is devoted to intermolecular contacts between neighbouring dimers responsible for mutual protein adhesion and for a special conformation of Met46 and Phe53 side chains not expected for free protein in water solution.     

Novel pseudosymmetric inhibitors of HIV-1 protease

Compounds containing the easily accessible Phe[CH(OH)CH₂N(NH)Phe dipeptide isostere as a non-hydrolyzable replacement of the scissile amide bond in the natural substrate are potent inhibitors of HIV-1 protease. The expected symmetric binding pattern of the most potent inhibitor in this series (CGP 53280, IC₅₀ = 9 nM) is illustrated by the X-ray analysis performed with the corresponding enzyme-inhibitor complex.     

Design and synthesis of HIV-1 protease inhibitors. Novel tetrahydrofuran P2/P2'-groups interacting with Asp29/30 of the HIV-1 protease. Determination of binding from X-ray crystal structure of inhibitor protease complex

A series of HIV-1 protease inhibitors having new tetrahydrofuran P2/P2' groups have been synthesised and tested for protease inhibition and antiviral activity. Six novel 4-aminotetrahydrofuran derivatives were prepared starting from commercially available isopropylidene-alpha-D-xylofuranose yielding six symmetrical and six unsymmetrical inhibitors. Promising sub nanomolar HIV-1 protease inhibitory activities were obtained. The X-ray crystal structure of the most potent inhibitor (23, K(i) 0.25 nM) co-crystallised with HIV-1 protease is discussed and the binding compared with inhibitors 1a and 1b.     

Active-site mobility in human immunodeficiency virus, type 1, protease as demonstrated by crystal structure of A28S mutant.

The mutation Ala28 to serine in human immunodeficiency virus, type 1, (HIV-1) protease introduces putative hydrogen bonds to each active-site carboxyl group. These hydrogen bonds are ubiquitous in pepsin-like eukaryotic aspartic proteases. In order to understand the significance of this difference between HIV-1 protease and homologous, eukaryotic aspartic proteases, we solved the three-dimensional structure of A28S mutant HIV-1 protease in complex with a peptidic inhibitor U-89360E. The structure has been determined to 2.0 A resolution with an R factor of 0.194. Comparison of the mutant enzyme structure with that of the wild-type HIV-1 protease bound to the same inhibitor (Hong L, Treharne A, Hartsuck JA, Foundling S, Tang J, 1996, Biochemistry 35:10627-10633) revealed double occupancy for the Ser28 hydroxyl group, which forms a hydrogen bond either to one of the oxygen atoms of the active-site carboxyl or to the carbonyl oxygen of Asp30. We also observed marked changes in orientation of the Asp25 catalytic carboxyl groups, presumably caused by the new hydrogen bonds. These observations suggest that catalytic aspartyl groups of HIV-1 protease have significant conformational flexibility unseen in eukaryotic aspartic proteases. This difference may provide an explanation for some unique catalytic properties of HIV-1 protease.     

Discovery of potent pyrrolidone-based HIV-1 protease inhibitors with enhanced drug-like properties

We have developed efficient syntheses of the HIV-1 protease inhibitor 4 and its analogues, which incorporate the pyrrolidone scaffold 2 as P1-P2 moiety. Evaluation of these analogues in the HIV-1 protease enzyme assay resulted in discovery of potent and more water soluble meta-amino- and meta-hydroxy inhibitors 17b and 19b. The SAR observed in this class of PIs could be rationalized with aid of the X-ray structure of inhibitor 28 co-crystallized with the HIV-1 protease, which suggested that the polar meta- (but not para-) benzyl substituents in P2 could side-step the hydrophobic S2 enzyme active pocket by rotating the P2 moiety around its Cbeta-Cgamma bond. Such reorientation allows to engage the unsubstituted, hydrophobic edge of benzyl moiety in P2 in the requisite P2/S2 hydrophobic interaction, and projects polar meta-substituent into the bound water. It appears that the meta-position can be chemically derivatized without potency loss of thus resulting inhibitors, as evidenced by potent 22-26. We thus identified pyrrolidone 2-based inhibitors exemplified by 17b and 19b, which uniquely accommodate both high enzyme potency and which provide a platform for fine-tuning of drug-like properties in this class of PIs by additional chemical manipulations on the meta-position.     

Hydroxyethylene isostere inhibitors of human immunodeficiency virus-1 protease: structure-activity analysis using enzyme kinetics, X-ray crystallography, and infected T-cell assays.

Analogues of peptides ranging in size from three to six amino acids and containing the hydroxyethylene dipeptide isosteres Phe psi Gly, Phe psi Ala, Phe psi NorVal, Phe psi Leu, and Phe psi Phe, where psi denotes replacement of CONH by (S)-CH(OH)CH2, were synthesized and studied as HIV-1 protease inhibitors. Inhibition constants (Ki) with purified HIV-1 protease depend strongly on the isostere in the order Phe psi Gly greater than Phe psi Ala greater than Phe psi NorVal greater than Phe psi Leu greater than Phe psi Phe and decrease with increasing length of the peptide analogue, converging to a value of 0.4 nM. Ki values are progressively less dependent on inhibitor length as the size of the P1' side chain within the isostere increases. The structures of HIV-1 protease complexed with the inhibitors Ala-Ala-X-Val-Val-OMe, where X is Phe psi Gly, Phe psi Ala, Phe psi NorVal, and Phe psi Phe, have been determined by X-ray crystallography (resolution 2.3-3.2 A). The crystals exhibit symmetry consistent with space group P6(1) with strong noncrystallographic 2-fold symmetry, and the inhibitors all exhibit 2-fold disorder. The inhibitors bind in similar conformations, forming conserved hydrogen bonds with the enzyme. The Phe psi Gly inhibitor adopts an altered conformation that places its P3' valine side chain partially in the hydrophobic S1' pocket, thus suggesting an explanation for the greater dependence of the Ki value on inhibitor length in the Phe psi Gly series. From the kinetic and crystallographic data, a minimal inhibitor model for tight-binding inhibition is derived in which the enzyme subsites S2-S2' are optimally occupied. The Ki values for several compounds are compared with their potencies as inhibitors of proteolytic processing in T-cell cultures chronically infected with HIV-1 (MIC values) and as inhibitors of acute infectivity (IC50 values). There is a rank-order correspondence, but a 20-1000-fold difference, between the values of Ki and those of MIC or IC50. IC50 values can approach those of Ki but are highly dependent on the conditions of the acute infectivity assay and are influenced by physiochemical properties of the inhibitors such as solubility.     

Substrate analog inhibitors of HIV-1 protease containing phenylnorstatine as a transition state element

Substrates of HIV-1 protease are classified into three groups (A, B and C) based on the amino acid residues present at P1' and P2' sites. Replacement of the scissile amide bond by phenylnorstatine in representative substrate analog sequences from class A, B and C, yielded inhibitors of HIV-1 protease. Of the twelve inhibitors synthesized in this series, class C substrate analog inhibitors are more potent inhibitors (Ki's 3.3-24 microM) than either class A or class B inhibitors. In this series of inhibitors, the (2S,3S) isomer of phenylnorstatine is preferred over the other isomers as a "transition state element" for design of inhibitors of HIV-1 protease.     

Crystal structure of an in vivo HIV-1 protease mutant in complex with saquinavir: insights into the mechanisms of drug resistance

Saquinavir is a widely used HIV-1 protease inhibitor drug for AIDS therapy. Its effectiveness, however, has been hindered by the emergence of resistant mutations, a common problem for inhibitor drugs that target HIV-1 viral enzymes. Three HIV-1 protease mutant species, G48V, L90M, and G48V/L90M double mutant, are associated in vivo with saquinavir resistance by the enzyme (Jacobsen et al., 1996). Kinetic studies on these mutants demonstrate a 13.5-, 3-, and 419-fold increase in Ki values, respectively, compared to the wild-type enzyme (Ermolieff J, Lin X, Tang J, 1997, Biochemistry 36:12364-12370). To gain an understanding of how these mutations modulate inhibitor binding, we have solved the HIV-1 protease crystal structure of the G48V/L90M double mutant in complex with saquinavir at 2.6 A resolution. This mutant complex is compared with that of the wild-type enzyme bound to the same inhibitor (Krohn A, Redshaw S, Richie JC, Graves BJ, Hatada MH, 1991, J Med Chem 34:3340-3342). Our analysis shows that to accommodate a valine side chain at position 48, the inhibitor moves away from the protease, resulting in the formation of larger gaps between the inhibitor P3 subsite and the flap region of the enzyme. Other subsites also demonstrate reduced inhibitor interaction due to an overall change of inhibitor conformation. The new methionine side chain at position 90 has van der Waals interactions with main-chain atoms of the active site residues resulting in a decrease in the volume and the structural flexibility of S1/S1' substrate binding pockets. Indirect interactions between the mutant methionine side chain and the substrate scissile bond or the isostere part of the inhibitor may differ from those of the wild-type enzyme and therefore may facilitate catalysis by the resistant mutant.     

Exploring the stereochemical requirements for protease inhibition by ureidopeptides.

A novel 'ureidopeptide' substrate analog inhibitor of the HIV-1 protease, created by substitution of a urea for the scissile amide bond of a hexapeptide substrate, was synthesized and tested for inhibition of HIV-1 protease. This inhibitor was designed as a stereochemical mutant of an earlier ureidopeptide inhibitor in which the P1' phenylalanine residue was changed from an l-isomer to a d-isomer. This was done in an attempt to increase binding to the enzyme by compensating for a lengthening of the peptide backbone. The inhibitor was synthesized from two protected tripeptide precursors using an oxidative Hoffmann rearrangement of a C-terminal peptide amide. The new inhibitor was found to inhibit HIV-1 protease with an observed IC(50) of 47 mum.     

Molecular basis for the relative substrate specificity of human immunodeficiency virus type 1 and feline immunodeficiency virus proteases

We have used a random hexamer phage library to delineate similarities and differences between the substrate specificities of human immunodeficiency virus type 1 (HIV-1) and feline immunodeficiency virus (FIV) proteases (PRs). Peptide sequences were identified that were specifically cleaved by each protease, as well as sequences cleaved equally well by both enzymes. Based on amino acid distinctions within the P3-P3' region of substrates that appeared to correlate with these cleavage specificities, we prepared a series of synthetic peptides within the framework of a peptide sequence cleaved with essentially the same efficiency by both HIV-1 and FIV PRs, Ac-KSGVF/VVNGLVK-NH(2) (arrow denotes cleavage site). We used the resultant peptide set to assess the influence of specific amino acid substitutions on the cleavage characteristics of the two proteases. The findings show that when Asn is substituted for Val at the P2 position, HIV-1 PR cleaves the substrate at a much greater rate than does FIV PR. Likewise, Glu or Gln substituted for Val at the P2' position also yields peptides specifically susceptible to HIV-1 PR. In contrast, when Ser is substituted for Val at P1', FIV PR cleaves the substrate at a much higher rate than does HIV-1 PR. In addition, Asn or Gln at the P1 position, in combination with an appropriate P3 amino acid, Arg, also strongly favors cleavage by FIV PR over HIV PR. Structural analysis identified several protease residues likely to dictate the observed specificity differences. Interestingly, HIV PR Asp30 (Ile-35 in FIV PR), which influences specificity at the S2 and S2' subsites, and HIV-1 PR Pro-81 and Val-82 (Ile-98 and Gln-99 in FIV PR), which influence specificity at the S1 and S1' subsites, are residues which are often involved in development of drug resistance in HIV-1 protease. The peptide substrate KSGVF/VVNGK, cleaved by both PRs, was used as a template for the design of a reduced amide inhibitor, Ac-GSGVF Psi(CH(2)NH)VVNGL-NH(2.) This compound inhibited both FIV and HIV-1 PRs with approximately equal efficiency. These findings establish a molecular basis for distinctions in substrate specificity between human and feline lentivirus PRs and offer a framework for development of efficient broad-based inhibitors.     

Structural studies of FIV and HIV-1 proteases complexed with an efficient inhibitor of FIV protease

Three forms of feline immunodeficiency virus protease (FIV PR), the wild type (wt) and two single point mutants, V59I and Q99V, as well as human immunodeficiency virus type 1 protease (HIV-1 PR), were cocrystallized with the C2-symmetric inhibitor, TL-3. The mutants of FIV PR were designed to replace residues involved in enzyme-ligand interactions by the corresponding HIV-1 PR residues at the structurally equivalent position. TL-3 shows decreased (improved) inhibition constants with these FIV PR mutants relative to wt FIV PR. Despite similar modes of binding of the inhibitor to all PRs (from P3 to P3'), small differences are evident in the conformation of the Phe side chains of TL-3 at the P1 and P1' positions in the complexes with the mutated FIV PRs. The differences mimick the observed binding of TL-3 in HIV-1 PR and correlate with a significant improvement in the inhibition constants of TL-3 with the two mutant FIV PRs. Large differences between the HIV-1 and FIV PR complexes are evident in the binding modes of the carboxybenzyl groups of TL-3 at P4 and P4'. In HIV-1 PR:TL-3, these groups bind over the flap region, whereas in the FIV PR complexes, the rings are located along the major axis of the active site. A significant difference in the location of the flaps in this region of the HIV-1 and FIV PRs correlates with the observed conformational changes in the binding mode of the peptidomimetic inhibitor at the P4 and P4' positions. These findings provide a structural explanation of the observed Ki values for TL-3 with the different PRs and will further assist in the development of improved inhibitors.     

Proteolysis of an active site peptide of lactate dehydrogenase by human immunodeficiency virus type 1 protease.

The muscle and heart lactate dehydrogenase (LDHs) of rabbit and pig are specifically cleaved at a single position by HIV-1 protease, resulting in the conversion of 36-kDa subunits of the oligomeric enzymes into 21- and 15-kDa protein bands as analyzed by SDS-PAGE. While the proteolysis was observed at neutral pH, it became more pronounced at pH 6.0 and 5.0. The time courses of the cleavage of the 36-kDa subunits were commensurate with the time-dependent loss of both quaternary structure and enzymatic activity. These results demonstrated that deoligomerization of rabbit muscle LDH at acidic pH rendered its subunits more susceptible to proteolysis, suggesting that a partially denatured form of the enzyme was the actual substrate. Proteolytic cleavage of the rabbit muscle enzyme occurred at a decapeptide sequence, His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp (scissile bond denoted throughout by an asterisk), which constitutes a "strand-loop" element in the muscle and heart LDH structures and contains the active site histidyl residue His-193. The kinetic parameters Km, Vmax/KmEt, and Vmax/Et for rabbit muscle LDH and the synthetic decapeptide Ac-His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp-NH2 were nearly identical, suggesting that the decapeptide within the protein substrate is conformationally mobile, as would be expected for the peptide substrate in solution. Insertion of part of this decapeptide sequence into bacterial galactokinase likewise rendered this protein susceptible to proteolysis by HIV-1 protease, and site-directed mutagenesis of this peptide in galactokinase revealed that the Glu residue at the P2' was important to binding to HIV-1 protease. Crystallographic analysis of HIV-1 protease complexed with a tight-binding peptide analogue inhibitor derived from this decapeptide sequence revealed that the "strand-loop" structure of the protein substrate must adopt a beta-sheet structure upon binding to the protease. The Glu residue in the P2' position of the inhibitor likely forms hydrogen-bonding interactions with both the alpha-amide and gamma-carboxylic groups of Asp-30 in the substrate binding site.     

Potent inhibitors of the HIV-1 protease incorporating cyclic urea P1-P2 scaffold

We have developed synthetic approaches to novel analogues of 2-imidazolidinone scaffold 2, which was found to be an effective P1-P2 mimetic in HIV-1 protease inhibitor 4. This enabled a rapid synthesis of analogues of 4 and subsequently allowed us to evaluate and rationalize the SAR. Accordingly, trans relationship of P1 and P2 substituents in the P1-P2 mimetic, as found in a related 2-pyrrolidone-based scaffold 1, was found necessary for high potency against HIV-1 protease. Results of this study provided further rationale towards subsequent optimization of 2-pyrrolidone-based lead 3, which led us to potent and drug-like HIV-1 protease inhibitors described in a follow-on report (Bioorg. Med. Chem. Lett. 2004, 14, in press. ).     

Design, synthesis, and biological evaluation of monopyrrolinone-based HIV-1 protease inhibitors possessing augmented P2' side chains

A series of monopyrrolinone-based HIV-1 protease inhibitors possessing rationally designed P2' side chains have been synthesized and evaluated for activity against wild-type HIV-1 protease. The most potent inhibitor displays subnanomolar potency in vitro for the wild-type HIV-1 protease. Additionally, the monopyrrolinone inhibitors retain potency in cellular assays against clinically significant mutant forms of the virus. X-ray structures of these inhibitors bound in the wild-type enzyme reveal important insights into the observed biological activity.     

8-Chloroguanosine: solid-state and solution conformations and their biological implications

The three-dimensional structure of 8-chloroguanosine dihydrate was determined by X-ray crystallography. The crystals belong to the orthorhombic space group P2(1)2(1)2(1), and the cell dimensions are a = 4.871 (1) A, b = 12.040 (1) A, and c = 24.506 (1) A. The structure was determined by direct methods, and least-squares refinement, which included all hydrogen atoms, converged at R = 0.031 for 1599 observed reflections. The conformation about the glycosidic bond is syn with chi CN = -131.1 degrees. The ribose ring has a C(2')-endo/C-(1')-exo (2T1) pucker, and the gauche+ conformation of the -CH2OH side chain is stabilized by an intramolecular O-(5')-H...N(3) hydrogen bond. Conformational analysis by means of 1H NMR spectroscopy showed that, in dimethyl sulfoxide, the sugar ring exhibits a marked preference for the C(2')-endo conformation (approximately 70%) and a conformation about the glycosidic bond predominantly syn (approximately 90%), hence similar to that in the solid state. However, the conformation of the exocyclic 5'-CH2OH group exhibits only a moderate preference for the gauche+ rotamer (approximately 40%), presumably due to the inability to form the intramolecular hydrogen bond to N(3) in a polar medium. The conformational features are examined in relation to the behavior of 8-substituted purine nucleosides in several enzymatic systems, with due account taken of the steric bulk and electronegativities of the 8-substituents.     

The structure and antiviral activity of ribavirin analogs. I. Molecular and crystal structure of 1-(2-hydroxyethoxymethyl)-1,2,4-triazole-5-carboxamide

The crystal and molecular structures of the antiviral compound 1-(2-hydroxyethoxymethyl)-1,2,4-triazole-5-carboxamide has been determined by the X-ray diffraction method. The space group is P2i/c, unit cell parameters a = 4,381, b = 18,679, c = 10,776 A, beta = 107,40 degrees, Z = 4. The structure was solved by the direct method and refined by a full-matrix least-squares procedure to R = 4.9%. Two planar groups of atoms can be distinguished in the molecule. The first group involves the atoms of triazole ring, C6, and C1', the second one contains C5, C6, O6 and N6 atoms. The angle between these planes is 5.6 degrees. The carboxyamide group is rotated by 180 degrees in comparison with this group in ribavirin. That is why the intramolecular hydrogen bond C1'-H1'. 1...O6 can form. Torsion angle O5'-C5'-C4'-O4' is 73.9 degrees and it corresponds to gauche-rotamer. The conformation about O4'-C4' bond is trans. The C1'-C4' bond is approximately perpendicular to the aglycone.