Detection of biotinylated proteins in polyacrylamide gels using an avidin-fluorescein conjugate

Biotinylated proteins are widely used as a molecular tool in biotechnological applications. In this paper, we demonstrated that biotinylated proteins after electrophoresis were detected directly in gels using an avidin-fluorescein conjugate with a fluorescence image analyzer. Upon analysis of the purified and chemically biotinylated protein, the sensitivity of this method was almost equal to that of silver staining. Chemically biotinylated proteins of Escherichia coli cell surfaces could also be specifically detected with our method. Furthermore, recombinant proteins fused with the biotin acceptor domain and biotinylated enzymatically in vivo were also detected in a lysate of E. coli specifically. The sensitivity and specificity of our method are high, and the procedure is simple. Therefore, our method would benefit detection of biotinylated proteins via gel electrophoresis and also various fields of study using avidin-biotin technology.     

A Comparison of Digoxigenin and Biotin Labelled DNA and RNA Probes for in Situ Hybridization

A number of in situ hybridization protocols using digoxigenin or biotin labelled probes were assessed for viral nucleic acid detection in formalin fixed, paraffin embedded tissue. Single-step detection protocols for biotin labelled probes produced low sensitivity; however, enzyme based one-step detection protocols for digoxigenin probes produced high sensitivity for both RNA and DNA systems. For both probe types, multistep detection protocols produced equally high sensitivity. Use of an enhanced APAAP procedure for digoxigenin labelled probes acheived maximal sensitivity without use of biotin-streptavidin reactions. The sensitivity of nucleic acid detection obtained with a digoxigenin labelled probe is comparable to that obtained using biotin. Digoxigenin labelled probes for nucleic acid detection are recommended for tissues with endogenous biotin.     

Biotin amplification of biotin and horseradish peroxidase signals in histochemical stains.

A procedure is described for intensifying histochemical reactions by amplification of biotinylated sites. This is achieved by deposition of biotinylated tyramine on the tissue through the enzymatic action of horseradish peroxidase (HRP). The amplified biotin sites are subsequently visualized by binding them to avidin, to which a marker is attached. This amplification greatly increases the sensitivity of staining procedures that employ HRP (and/or biotin) in tissue. For neuroanatomical pathway tracing methods, the procedure greatly increases the detectability of the injected tracer. For lectin histochemistry and immunohistochemistry, the amplification requires that the lectin or primary antibody be greatly diluted. This dilution results in less background staining and yet strong signals are produced even when very dilute reagents are used. Alternatively, the amplification permits much shorter incubations in primary antibodies when dilutions are used that would ordinarily be used with conventional bridge techniques. The procedure is also useful for amplifying very weak signals, such as those of immunoreactions in glutaraldehyde-fixed tissue. The amplification procedure, together with the availability of avidin probes labeled with fluorochromes, colloidal gold, or enzyme systems other than HRP, provides a means of greatly increasing the versatility of a variety of histochemical reactions, including those for detecting in situ hybridization probes, in addition to increasing the sensitivity of the reactions.     

Controlled layer-by-layer immobilization of horseradish peroxidase.

Horseradish peroxidase (HRP) was biotinylated with biotinamidocaproate N-hydroxysuccinimide ester (BcapNHS) in a controlled manner to obtain biotinylated horseradish peroxidase (Bcap-HRP) with two biotin moieties per enzyme molecule. Avidin-mediated immobilization of HRP was achieved by first coupling avidin on carboxy-derivatized polystyrene beads using a carbodiimide, followed by the attachment of the disubstituted biotinylated horseradish peroxidase from one of the two biotin moieties through the avidin-biotin interaction (controlled immobilization). Another layer of avidin can be attached to the second biotin on Bcap-HRP, which can serve as a protein linker with additional Bcap-HRP, leading to a layer-by-layer protein assembly of the enzyme. Horseradish peroxidase was also immobilized directly on carboxy-derivatized polystyrene beads by carbodiimide chemistry (conventional method). The reaction kinetics of the native horseradish peroxidase, immobilized horseradish peroxidase (conventional method), controlled immobilized biotinylated horseradish peroxidase on avidin-coated beads, and biotinylated horseradish peroxidase crosslinked to avidin-coated polystyrene beads were all compared. It was observed that in solution the biotinylated horseradish peroxidase retained 81% of the unconjugated enzyme's activity. Also, in solution, horseradish peroxidase and Bcap-HRP were inhibited by high concentrations of the substrate hydrogen peroxide. The controlled immobilized horseradish peroxidase could tolerate much higher concentrations of hydrogen peroxide and, thus, it demonstrates reduced substrate inhibition. Because of this, the activity of controlled immobilized horseradish peroxidase was higher than the activity of Bcap-HRP in solution. It is shown that a layer-by-layer assembly of the immobilized enzyme yields HRP of higher activity per unit surface area of the immobilization support compared to conventionally immobilized enzyme.     

Enzyme-linked coagulation assay: V. Amplified blotting assays using snake venom conjugates

We have previously reported an ultrasensitive microtiter plate assay, enzyme-linked coagulation assay (ELCA), which can measure a factor X activator isolated from Russell's viper venom (RVV-XA) at concentrations less than 0.1 amol/sample. The high sensitivity of this assay is derived from enzyme amplification via the clotting cascade in combination with the utilization of enzyme-labeled solution-phase and unlabeled solid-phase fibrinogen. Modification of the ELCA assay to detect RVV-XA directly bound to nitrocellulose, ELCA blot, as described in this report, allowed the detection of blotted RVV-XA at amounts as low as 2 fg. The high sensitivity of the ELCA blot was utilized to develop an immunodetection system for Western blots, the ELCA immunoblot, and a biotin/avidin protein stain for blotted membranes, biotin/avidin ELCA blot. For the ELCA immunoblot, using RVV-XA-labeled antibodies we were able to detect blotted placental alkaline phosphatase at amounts two orders of magnitude lower than those when using peroxidase-labeled antibodies. Using an avidin-RVV-XA conjugate in the biotin/avidin ELCA blot, 1 ng of biotinylated fibrinogen and 100 pg of biotinylated placental alkaline phosphatase, which had been subjected to electrophoresis and transferred to a nitrocellulose membrane, were visualized. These data support the general utility of the ELCA system for assay amplification on solid-phase matrices and demonstrate considerable potential of this methodology in "blotting" applications.     

Biotinylated granulocyte/macrophage colony-stimulating factor analogues: effect of linkage chemistry on activity and binding.

Biotinylated granulocyte/macrophage colony-stimulating factor (GM-CSF) analogues with different linkage chemistries and levels of conjugated biotin were synthesized by reacting recombinant human GM-CSF with sulfosuccinimidyl 6-biotinamidohexanoate or biotin hydrazide/1-[3-(dimethylamino)-propyl]-3-ethylcarbodiimide. These chemically reactive forms of biotin produced derivatives biotinylated at amine or carboxyl groups, respectively. Amine-derivatized analogues of 1.2 and 3.8 mol of biotin/mol of protein (N1-bGM-CSF and N4-bGM-CSF) and a carboxyl-modified analogue of 4.6 mol of biotin/mol of protein (C5-bGM-CSF) were synthesized. These analogues were compared to determine the effect of biotinylation on biological activity and GM-CSF receptor binding characteristics. The biotinylated proteins migrated with the same molecular weight as the native, unmodified protein as determined by SDS-PAGE and could be detected by Western blotting with alkaline phosphatase conjugated streptavidin, thus demonstrating the biotin linkage. All three analogues retained full agonist activity relative to the native protein (EC50 = 10-15 pM) when assayed for the stimulation of human bone marrow progenitor cell growth. Cell surface GM-CSF receptor binding was characterized by the binding of the analogues to human neutrophils, with detection by fluorescein-conjugated avidin and fluorescence-activated cell sorting. The N-bGM-CSFs demonstrated GM-CSF receptor specific binding that was displaceable by excess underivatized protein, with the detected fluorescence signal decreasing with increasing biotin to protein molar ratio. In contrast, C5-bGM-CSF binding above background fluorescence could not be detected using this system, suggesting that this derivative could bind to and activate the receptor, but not simultaneously bind fluorescein-conjugated avidin. The amine-derivatized biotinylated GM-CSF analogues retained biological activity, could specifically label cell surface receptors, and may be useful nonradioactive probes with which to study GM-CSF receptor cytochemistry and receptor modulation by flow cytometry.     

An immobilized biotin ligase: surface display of Escherichia coli BirA on Saccharomyces cerevisiae

The Escherichia coli biotin ligase enzyme BirA has been extensively used in recent years to generate site-specifically biotinylated proteins via a biotin acceptor peptide tag. In the present study, BirA was displayed for the first time on the yeast Saccharomyces cerevisiae using the Aga1p-Aga2p platform and assayed using a peptide-tagged protein as the substrate. The enzyme is fully functional and resembles the soluble form in many of its properties, but the yeast-displayed enzyme demonstrates stability and reusability on the time scale of weeks. Thus, the yeast-displayed BirA system represents a facile and highly economical alternative for producing site-specifically biotinylated proteins.     

Enhanced chemiluminescent method for the detection of DNA dot-hybridization assays

A simple enhanced chemiluminescent procedure for the quantitation of DNA hybridization to dot blots is described. The method utilizes DNA probes labeled with biotin, which are detected using a biotinylated streptavidin-horseradish peroxidase complex. The peroxidase enzyme then takes part in an enhanced chemiluminescent reaction with luminol, peroxide, and an enhancer. The method can be used to give quantitative results using a photomultiplier tube or qualitative results by recording the light emission on instant photographic film.     

Recombinant Gaussia luciferase with a reactive cysteine residue for chemical conjugation: Expression, purification and its application for bioluminescent immunoassays

The mutated recombinant Gaussia luciferase (hgGLase) having the hinge sequence with a reactive cysteine residue at the carboxyl terminal region was purified from Escherichia coli cells by nickel-chelate affinity chromatography and hydrophobic chromatography. The biotinylated hgGLase (Biotin-hgGLase) was prepared by chemical conjugation with a maleimide activated biotin and apply to bioluminescent immunoassay. In the streptavidin and biotin complex system using Biotin-hgGLase, the measurable range of α-fetoprotein as a model analyte was 0.02–100 ng/ml with the coefficient of variation between 2.5% and 5.2%. The sensitivity of Biotin-hgGLase was similar to that by using the detection system of aequorin, alkaline phosophatase and horseradish peroxidase as a label enzyme.     

Evaluation of the relative effectiveness of hybridization probes prepared by action of hydrazides of biotin derivatives on DNA

Efficiencies of biotinylated DNAs as hybridisation probes in a model system of non-radioactive detection were compared. Probes were obtained by interaction of single-stranded DNA and each of four different hydrazides of biotin derivatives. The most sensitivity in detection of complementary target was obtained using (biocytin hydrazide)-treated DNA. Relations between hydrazide structures and sensitivity of biotinylated probes are discussed.     

Artifactual detection of biotin on histones by streptavidin

Biotinylation is a recent addition to the list of reported posttranslational modifications made to histones. Holocarboxylase synthetase (HCS) and biotinidase have been implicated as biotinylating enzymes. However, the details of the mechanism and the regulation of biotin transfer on and off histones remains unclear. Here we report that in a cell culture system low biotin availability reduces biotinylation of carboxylases, yet apparent biotinylation of histones is unaffected. This is despite biotin depletion having detrimental effects on cell viability and proliferation. Further analysis of the widely used method for detecting biotin on histones, streptavidin blotting, revealed that streptavidin interacts with histones independently of biotin binding. Preincubation of streptavidin with free biotin reduced binding to biotinylated carboxylases but did not block binding to histones. To investigate biotinylation of histones using an alternative detection method independent of streptavidin, incorporation of 14C biotin into biotinylated proteins was analyzed. Radiolabeled biotin was readily detectable on carboxylases but not on histones, implying very low levels of biotin in the nucleus attached to histone proteins (< 0.03% biotinylation). In conclusion, we would caution against the use of streptavidin for investigating histone biotinylation.     

Insights into the mechanism and regulation of pyruvate carboxylase by characterisation of a biotin-deficient mutant of the Bacillus thermodenitrificans enzyme

Pyruvate carboxylase is a biotin-dependent enzyme in which the biotin is carboxylated by a putative carboxyphosphate intermediate that is formed in a reaction between ATP and bicarbonate. The resultant carboxybiotin then transfers its carboxyl group to pyruvate to form oxaloacetate. In the Bacillus thermodenitrificans enzyme the biotin is covalently attached to K1112. A mutant form of the enzyme (K1112A) has been prepared which is not biotinylated. This mutant did not catalyse the complete reaction, but did catalyse ATP-cleavage and the carboxylation of free biotin. Oxaloacetate decarboxylation was not catalysed, even in the presence of free biotin, suggesting that only the biotin carboxylation domain of the enzyme is accessible to free biotin. This mutant allowed the study of ATP-cleavage both coupled and not coupled to biotin carboxylation. Kinetic analyses of these reactions indicate that the major effect of the enzyme activator, acetyl CoA, is to promote the carboxylation of biotin. Acetyl CoA reduces the K(m)s for both MgATP and biotin. In addition, pH profiles of the ATP-cleavage reaction in the presence and absence of free biotin revealed the involvement of several ionisable residues in both ATP-cleavage and biotin carboxylation. K1112A also catalyses the phosphorylation of ADP from carbamoyl phosphate. Stopped-flow studies using the fluorescent ATP analogue, formycin A-5'-triphosphate, in which nucleotide binding to the holoenzyme was compared to K1112A indicated that the presence of biotin enhanced binding. Attempts to trap the putative carboxyphosphate intermediate in K1112A using diazomethane were unsuccessful.     

Biotin IgM Antibodies in Human Blood: A Previously Unknown Factor Eliciting False Results in Biotinylation-Based Immunoassays

Biotin is an essential vitamin that binds streptavidin or avidin with high affinity and specificity. As biotin is a small molecule that can be linked to proteins without affecting their biological activity, biotinylation is applied widely in biochemical assays. In our laboratory, IgM enzyme immuno assays (EIAs) of μ-capture format have been set up against many viruses, using as antigen biotinylated virus like particles (VLPs) detected by horseradish peroxidase-conjugated streptavidin. We recently encountered one serum sample reacting with the biotinylated VLP but not with the unbiotinylated one, suggesting in human sera the occurrence of biotin-reactive antibodies. In the present study, we search the general population (612 serum samples from adults and 678 from children) for IgM antibodies reactive with biotin and develop an indirect EIA for quantification of their levels and assessment of their seroprevalence. These IgM antibodies were present in 3% adults regardless of age, but were rarely found in children. The adverse effects of the biotin IgM on biotinylation-based immunoassays were assessed, including four inhouse and one commercial virus IgM EIAs, showing that biotin IgM do cause false positivities. The biotin can not bind IgM and streptavidin or avidin simultaneously, suggesting that these biotin-interactive compounds compete for the common binding site. In competitive inhibition assays, the affinities of biotin IgM antibodies ranged from 2.1×10(-3) to 1.7×10(-4 )mol/L. This is the first report on biotin antibodies found in humans, providing new information on biotinylation-based immunoassays as well as new insights into the biomedical effects of vitamins.     

Avidin- or streptavidin-biotin as a highly sensitive method to stain total protein on membranes

A sensitive method for staining proteins after transfer from polyacrylamide gels to nitrocellulose paper is described. Transferred proteins are first derivatized by reaction of the nitrocellulose replica with sulfosuccinimidobiotin and are then reacted sequentially with streptavidin, rabbit anti-streptavidin, and horseradish peroxidase-conjugated goat anti-rabbit IgG antibody. Incubation with the enzyme substrate α-chloronaphthol, produces dark protein bands against a white background. The binding of streptavidin to the proteins is dependent on biotin derivatization as demonstrated by competition with biotinylated bovine serum albumin or 10 nM biotin. The procedure detects less than 5ng of transferred protein in a single band and is thus 5–10 times more sensitive than horseradish peroxidase-conjugated avidin alone. For bovine serum albumin, the method is comparable in sensitivity to silver staining of protein in polyacrylamide gels.     

The effect of avidin-biotin interactions in detection systems for in situ hybridization.

The effect of avidin-biotin interactions in several detection systems for the non-radioactive in situ hybridization (ISH) technique was studied in a model system using a transitional cell carcinoma line and a biotinylated DNA probe. We performed fluorescence ISH to unravel the individual steps in a sensitive and frequently used amplification method which makes use of the alternating cytochemical detection layers of fluorescein isothiocyanate-conjugated avidin (AvFITC) and biotinylated goat anti-avidin (BioGAA) antibodies to detect the hybridized and biotinylated probe. Our experiments revealed that BioGAA antibodies bind with their antigen binding sites and not with their biotin moieties to avidin molecules that have already interacted with the DNA probe. The probable working mechanism of this amplification method is presented in a model. Furthermore, we used a peroxidase staining technique to compare with each other the sensitivity of several other detection systems in which avidin-biotin interactions play an important role, e.g., the avidin-biotinylated peroxidase complex (ABC) system. The experiments show that avidin molecules can not be efficiently used to interconnect two biotinylated molecular layers, since their introduction leads to firmly closed cytochemical networks. Such a closed network is already formed between the hybridized and biotinylated DNA probe and a first detection layer of avidin molecules, as appears from the finding that biotinylated molecules could hardly be coupled to these avidin molecules in a following detection layer. Therefore, the results presented here provide us with new insight into the molecular basis of cytochemical network formation. This will enable us to choose the proper procedures for increasing the sensitivity of ISH detection systems.     

Protein engineering of streptavidin for in vivo assembly of streptavidin beads

Escherichia coli was engineered to intracellularly manufacture streptavidin beads. Variants of streptavidin (monomeric, core and mature full length streptavidin) were C-terminally fused to PhaC, the polyester granule forming enzyme of Cupriavidus necator. All streptavidin fusion proteins mediated formation of the respective granules in E. coli and were overproduced at the granule surface. The monomeric streptavidin showed biotin binding (0.7 ng biotin/microg bead protein) only when fused as single-chain dimer. Core streptavidin and the corresponding single-chain dimer mediated a biotin binding of about 3.9 and 1.5 ng biotin/mug bead protein, respectively. However, biotin binding of about 61 ng biotin/mug bead protein with an equilibrium dissociation constant (KD) of about 4 x 10(-8)M was obtained when mature full length streptavidin was used. Beads displaying mature full length streptavidin were characterized in detail using ELISA, competitive ELISA and FACS. Immobilisation of biotinylated enzymes or antibodies to the beads as well as the purification of biotinylated DNA was used to demonstrate the applicability of these novel streptavidin beads. This study proposes a novel method for the cheap and efficient one-step production of versatile streptavidin beads by using engineered E. coli as cell factory.     

Use of recombinant biotinylated aequorin in microtiter and membrane-based assays: purification of recombinant apoaequorin from Escherichia coli.

Aequorin is a calcium-dependent bioluminescent protein isolated from the hydromedusan Aequorea victoria. The gene for aequorin has been cloned and overexpressed in Escherichia coli [Prasher et al. (1985) Biochem. Biophys. Res. Commun. 126, 1259; Prasher et al. (1987) Biochemistry 26, 1326]. Higher levels of expression have recently been obtained by subcloning aequorin cDNA into the pRC23 plasmid vector such that its expression is under control of the lambda PL promoter [Cormier et al. (1989) Photochem. Photobiol. 49, 509]. Purification of recombinant apoaequorin from E. coli containing this new recombinant plasmid (pAEQ1.3) was accomplished by a two-step procedure involving gel filtration and anion-exchange chromatography on Sephadex G-100 and DEAE-Sepharose, respectively. Typically, 400-500 mg of recombinant protein was obtained from 100 L of fermentation culture. The purified recombinant apoaequorin could be converted to aequorin in high yield upon incubation with synthetic coelenterate luciferin, dissolved oxygen, and a thiol reagent with a photon yield similar to the native photoprotein. Detection of recombinant aequorin in the Dynatech ML1000 Microplate luminometer was linear between 10(-18) and 10(-12) mol, and little loss of specific activity was observed when the protein was derivatized with biotin. The biotinylated derivative was stable when frozen, lyophilized, or stored at 4 degrees C. The feasibility of using biotinylated aequorin as a nonradioactive tag was established by its application in a variety of solid-phase assay formats using the high-affinity streptavidin/biotin interaction. A microtiter-based bioluminescent immunoassay (BLIA) using biotinylated aequorin and the ML1000 luminometer was developed for the detection of subnanogram amounts of a glycosphingolipid (Forsmann antigen). In addition, nanogram to subnanogram quantities of protein antigens and DNA, immobilized on Western and Southern blots, respectively, were detected on instant and X-ray films using biotinylated aequorin.     

Production of antibodies that bind biotin and inhibit biotin containing enzymes.

Methods were developed for the coupling of biotin to bovine serum albumin and bovine gamma-globulin using a water-soluble carbodimide. The use of [14-C]biotin as a tracer allowed quantitation of the incorporation of biotin into the conjugates: 2.55 mol of biotin was incorporated per mol of gamma-globulin and 7-9 mol of biotin was incorporated per mol of serum albumin in different preparations. These conjugates were highly immunogenic in the rabbit and anti-bodies reactive with the biotinyl group itself could be detected by their ability to precipitate the heterologous biotinated carrier but not the unmodified heterologous carrier. There antisera rapidly inactivated transcarboxylase and pyruvate carboxylase and this inactivation could be blocked by pretreatment of the antisera with biotin or biocytin. Using enzyme inhibition to detect free antibody, the binding constant for biotin was found to be 5.0 x 10- minus 8 M and that for biocytin 3.5 x 10- minus 8 M.     

Bioluminescent assays using glucose-6-phosphate dehydrogenase: application to biotin and streptavidin detection

A streptavidin-glucose-6-phosphate dehydrogenase (G6PDH) conjugate was synthesized and its properties were studied, along with those of biotin-G6PDH conjugates. Two bioluminescent assays were used. Streptavidin was assayed in two steps: streptavidin samples were first incubated with a small amount of biotin-G6PDH and then with biotinylated rabbit gamma-globulins. The complex was immobilized on a bioluminescent immunoadsorbent. In the single-step biotin assay, free biotin was allowed to compete with biotin linked to rabbit gamma-globulins for binding to streptavidin-G6PDH in the presence of the bioluminescent immunoadsorbent. Neither assay required washing or separation steps and the sensitivity was 0.2 ng for streptavidin and 100 fg for biotin. Different applications are described: studies of biotin reactivity when linked to probes in solution or immobilized, and quantitation of biotin in biotinylated DNA probes and oligonucleotides.