PEG/NaPA aqueous two-phase systems for the purification of proteases expressed by Penicillium restrictum from Brazilian Savanna

The partitioning of proteases expressed by Penicillium restrictum from Brazilian Savanna in an inexpensive aqueous two-phase system composed of poly (ethylene glycol) (PEG) and sodium polyacrylate (NaPA) was studied. The effects of PEG molecular weight and concentration, as well as NaPA concentration and the concentration of fermented broth on protease partitioning were studied. Partitioning into the top PEG-rich phase was increased in systems with smaller PEG-molecular weight, higher NaPA concentration and lower PEG concentration. For most systems studied, purification has been achieved by directing the biomolecule partition to the opposite phase of the other proteins, providing the enzyme purification. The highest partition coefficient was obtained using 20 wt% NaPA, 4 wt% PEG 2000 g mol⁻¹ and 45 wt% fermented broth, leading to a purification factor of 1.98 and partition coefficient of 37.73. The system showed high mass balances and yield, indicating enzyme stability and applicability for industrial processes. The partitioning results using the PEG/NaPA/NaCl system show that this method could be used to purify or concentrate protease from fermented broth.     

Extractive fermentation for enhanced gellan-hydrolysing enzyme production by Bacillus thuringiensis H14

A new extractive fermentation process using PEG and potassium phosphate aqueous two-phase system (ATPS) was developed for enhanced production of gellan-hydrolysing enzyme by Bacillus thuringiensis H14. Five different Bacillus sp. were tested for their ability to synthesize gellan-hydrolysing enzyme. Bacillus thuringiensis H14 was found to be the best organism for gellan-hydrolysing enzyme production. The enzyme showed maximum activity at pH 7.5 and 40 °C. The partition studies of gellan-hydrolysing enzyme in the system using PEG X (X = 9000, 6000, 4000) and potassium phosphate–water and PEG–sodium citrate–water system indicated at PEG (4000)– potassium phosphate–water is the best system for partitioning of gellan-hydrolysing enzyme into the PEG phase (K = 4.99). Gellan-hydrolysing enzyme production by Bacillus thuringiensis H14 was studied in ATPSs composed of PEG X (X = 9000, 6000, 4000) and potassium phosphate. The top phase is continuous and rich in PEG while the bottom phase is dispersed and is rich in phosphate, microbial cells being mainly retained in the bottom phase. The gellan-hydrolysing enzyme produced during fermentation partitioned into the upper PEG phase and total gellan-hydrolysing enzyme produced was 2.12, 2.29 and 2.40 times higher than that of homogeneous fermentation when the fermentations were carried out using PEG 9000–potassium phosphate–water, PEG 6000–potassium phosphate–water, PEG 4000–potassium phosphate–water systems respectively.     

Direct purification of Burkholderia Pseudomallei lipase from fermentation broth using aqueous two-phase systems

An aqueous two-phase purification process was employed for the recovery of Burkholderia pseudomallei lipase from fermentation broth. The partition behavior of B. pseudomallei lipase was investigated with various parameters such as phase composition, tie-line length (TLL), volume ratio (V_R), sample loading, system pH, and addition of neutral salts. Optimum conditions for the purification of lipase were obtained in polyethylene glycol (PEG) 6000-potassium phosphate system using TLL of 42.2% (w/w), with VR of 2.70, and 1% (w/w) NaCl addition at pH 7 for 20% (w/w) crude load. Based on this system, the purification factor of lipase was enhanced to 12.42 fold, with a high yield of 93%. Hence, the simplicity and effectiveness of aqueous two-phase systems (ATPS) in the purification of lipase were proven in this study.     

Variation of penicillin acylase partition coefficient with phase volume ratio in poly(ethylene glycol)–sodium citrate aqueous two-phase systems

The influence of phase volume ratio on partition and purification of penicillin acylase from Escherichia coli on poly(ethylene glycol)–sodium citrate aqueous two-phase systems was studied. In PEG 1000 systems both partition coefficients of the enzyme and total protein increased with decreasing phase volume ratio. However, in PEG 3350 containing NaCl, penicillin acylase follows a reverse trend, while total protein behaves in the same way. Implications for protein purification designs are discussed.     

AQUEOUS TWO-PHASE EXTRACTION FOR THE PURIFICATION OF ALKALINE AGARASES FROM CULTURE EXTRACTS OF Pseudomonas aeruginosa AG LSL-11

The agarases were purified for the first time an using aqueous two-phase system (ATPS) consisting of polyethylene glycol (PEG) and phosphate salt. The three extracellular, alkaline agarases produced by Pseudomonas aeruginosa AG LSL-11 were efficiently extracted into the top PEG-rich layer. The influencing factors on the partition of agarases—molecular weight of the PEG, system pH, system temperature, and NaCl concentration—were investigated. All the factors were found to have a significant effect on the partition of agarases except NaCl. The optimal ATPS parameters for the partitioning and purification of agarases were found to be 12% PEG 600 and 11.9% (w/w) phosphate salt at pH 8.0 and 4°C. All three agarases were concentrated in the top PEG phase with 6.19-fold purity and 71.21% recovery. The ATPS was found to be more convenient and economical than the conventional ion-exchange chromatography (IEC) method for extraction of three agarases and could be significantly employed for the purification of agarases from fermentation broth.     

Influence of partition parameters on a recombinant antigen of Schistosoma mansoni expressed on E. coli using poly(ethylene glycol)–hydroxypropyl starch aqueous two-phase system

This work describes the partition of a Schistosoma mansoni tegumental antigen produced by a recombinant Escherichia coli strain using an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) and purified hydroxypropyl-starch (Reppal PES 100). The effects of the polymer molecular weight, tie line length and pH on antigen partitioning were investigated. The detection of the antigen in both phases was determined by ELISA. The system composed of PEG 8000 (5.1% w/w) and Reppal PES 100 (13.0% w/w) led to a yield of 92% and a purification factor of 12 concerning the antigen in the PEG-rich phase. It was observed that antigen partition in ATPSs was strongly affected by the pH and tie line length. In addition, it was possible in a single step, to remove the cell debris, which precipitated at the interface of the system.     

Purification of protein C from human plasma by precipitation and aqueous two-phase partitioning

Summary Precipitation with PEG and partitioning in PEG/dextran aqueous two-phase systems are applied to the purification of protein C, a human plasma protein with a key role in anti-coagulation. Tandem application of precipitation followed by partitioning yields a purification factor for protein C greater than that using either process individually. The results are discussed using the hypothesis that the mechanism of solvation of protein C by PEG is similar, while that for total plasma proteins is different, in the two processes.     

Purification of lipase produced by a new source of Bacillus in submerged fermentation using an aqueous two-phase system

This work discusses the application of an aqueous two-phase system for the purification of lipases produced by Bacillus sp. ITP-001 using polyethylene glycol (PEG) and potassium phosphate. In the first step, the protein content was precipitated with ammonium sulphate (80% saturation). The enzyme remained in the aqueous solution and was dialyzed against ultra-pure water for 18 h and used to prepare an aqueous two-phase system (PEG/potassium phosphate). The use of different molecular weights of PEG to purify the lipase was investigated; the best purification factor (PF) was obtained using PEG 20,000g/mol, however PEG 8000 was used in the next tests due to lower viscosity. The influence of PEG and potassium phosphate concentrations on the enzyme purification was then studied: the highest FP was obtained with 20% of PEG and 18% of potassium phosphate. NaCl was added to increase the hydrophobicity between the phases, and also increased the purification factor. The pH value and temperature affected the enzyme partitioning, with the best purifying conditions achieved at pH 6.0 and 4°C. The molecular mass of the purified enzyme was determined to be approximately 54 kDa by SDS-PAGE. According to the results the best combination for purifying the enzyme is PEG 8000g/mol and potassium phosphate (20/18%) with 6% of NaCl at pH 6.0 and 4°C (201.53 fold). The partitioning process of lipase is governed by the entropy contribution.     

The extractive purification of peroxidase from plant raw materials in aqueous two-phase systems

The extractive purification of peroxidase from Armoracia rusticana roots and Glycine max seed coats in temperature-induced and affinity microsphere-containing aqueous two-phase systems was stuied. The extractive purification of peroxidase from Glycine max seed coats was carried out in a temperature-induced aqueous two-phase system formed by Triton X-45, Triton X-100 and sodium acetate at pH 5.5 A 99% yield with a 6-fold purification factor was obtained. When the clear top phase was subjected to concanavalin-A affinity chromatography, the purification factor rose to 41 and the yield dropped to 28%. A two-step purification process for peroxidase from Armoracia rusticana roots was developed by adding concanavalin-A affinity microspheres to a PEG/phosphate aqueous two-phase system. The method allows a 60% recovery of high purity peroxidase (1,860 guaiacol units per mg). A lower recovery rate and degree of purification of this enzyme was achieved after temperature-induced aqueous two-phase partition or acetone precipitation and concanavalin-A affinity column chromatography.     

Optimization of conditions for acid protease partitioning and purification in aqueous two-phase systems using response surface methodology

Aspergillopepsin I, an acid protease, was purified using an aqueous two-phase system that comprised various combinations of polyethylene glycol (PEG), NaH₂PO₄ and NaCl. Partition of the enzyme depended upon the molecular mass of the PEG and the presence of NaCl. With PEG 1500, 4000 and 6000, the partition coefficients were increased by 1,500-, 1,800- and 560-fold compared to values without NaCl. The presence of NaCl (8.75%, w/w) increased purification by 3.8, 9.5 and 2.8 times into these respective PEGs. The optimal aqueous two-phase system for acid protease purification was developed using response surface methodology. This system contained 17.3% of PEG 4000 (w/w), 15% NaH₂PO₄ (w/w) and 8.75% NaCl (w/w) and provided the best partition coefficient (Ke > 1,100) and yield over 99% in the same phase. The optimal ATPS purification factor of acid protease was over 5.     

Purification and in situ immobilization of lipase from of a mutant of Trichosporon laibacchii using aqueous two-phase systems

The crude intracellular lipase (cell homogenate) from Trichosporon laibacchii was subjected to partial purification by aqueous two-phase system (ATPS) and then in situ immobilization by directly adding diatomites as carrier to the top PEG-rich phase of ATPS. A partition study of lipase in the ATPS formed by polyethylene glycol–potassium phosphate has been performed. The influence of system parameters such as molecular weight of PEG, system phase composition and system pH on the partitioning behaviour of lipase was evaluated. The ATPS consisting of PEG 4000 (12%) and potassium phosphate (K₂HPO₄, 13%) resulted in partition of lipase to the PEG-rich phase with partition coefficient 7.61, activity recovery 80.4%, and purification factor of 5.84 at pH of 7.0 and 2.0% NaCl. Moreover, the in situ immobilization of lipase in PEG phase resulted in a highest immobilized lipase activity of 1114.6 U g^?1. The above results show that this novel lipase immobilization procedure which couples ATPS extract and enzyme immobilization is cost-effective as well as time-saving. It could be potentially useful technique for the purification and immobilization of lipase.     

Liquid–liquid extraction of an extracellular alkaline protease from fermentation broth using aqueous two-phase and reversed micelles systems

Summary The study of recovery of an extracellular alkaline protease from fermentation broth produced by Norcadiopsis sp, was carried out with liquid–liquid extraction through sodium di-(2-ethylhexyl) sulphosuccinate/isooctane reversed micelles systems and aqueous two-phase systems (polyethylene glycol/potassium phosphate). The best conditions for extraction and back-extraction with the reversed micelles system was obtained at pH 9.0 and pH 5.0, respectively, showing a yield of protein of 6.16%, a specific activity of 4.10 U/ml and a purification factor of 1.80. The studies using aqueous two-phase systems of polyethylene glycol/potassium phosphate at pH 10.0 showed purification factors of 2 and 5, and protein yield of 11 and 4%, respectively, for polyethylene glycol 550/potassium phosphate and polyethylene glycol 8000/potassium phosphate. The results indicate that the aqueous two-phase systems are more attractive as a first step in the isolation and purification processes.     

Production of immobilized penicillin acylase using aqueous polymer systems for enzyme purification and in situ immobilization

A novel approach for the isolation and purification of penicillin acylase (PA), which couples aqueous two-phase partitioning and enzyme immobilization has been investigated.A PA yield of 90% was achieved by treating E. coli cells with 4% butyl acetate, freeze-thawing step, and pressure homogenization. PA purification (93% recovery) was achieved by (1) removing cell debris via precipitation with polyethylene glycol (PEG 2000); (2) aqueous two-phase partitioning using a PEG 2000 + phosphate system (87% recovery).An in situ enzyme immobilization approach, using oxirane acrylic or aldehyde-agarose beads dispersed in the PEG-rich phase, was explored for the conversion of penicillin G to 6-aminopenicillanic acid. An appropriate immobilization reaction time was found. The catalytic performance of the enzyme, when immobilized, was found not to be affected by recycling of the phase-forming components.     

Liquid–liquid extraction of a recombinant protein, cytochrome b5, from an impure extract using aqueous two-phase systems

The recovery and purification of a recombinant protein, cytochrome b₅, from an impure extract of Escherichia coli disrupted cells was carried out in one step using a liquid–liquid extraction process of aqueous two-phase systems of polyethylene glycol (PEG) and potassium phosphate salts. With this separation process it was possible in one single step to remove the cell debris, that precipitate at interface of the system, and to obtain relatively high recovery yields, nearly 67%, of the target protein in the salt-rich phase, with purification factors up to 6.     

Partition of horseradish peroxidase in aqueous two-phase systems containing polyvinylpyrrolidone

Growing peroxidase utilisation in different industries encourages the search for high benefit/cost ratio purification methods such as aqueous two-phase partition. In this way, the partitioning behaviour of peroxidase from Armoracia rusticanaroots in polyvinylpirrolidone/Reppal and polyvinylpirrolidone/salt aqueous two-phase systems was investigated. Based on these results, a two-step purification process was developed. In the first system (polyvinylpyrrolidone K30/Reppal PES 200, pH 7.0), cell debris and some contaminating proteins were shifted to the bottom phase while peroxidase concentrated in the top phase. After discarding the bottom phase, the second step involved addition of magnesium sulphate thus forming a second aqueous two-phase system. At this step, the enzyme was extracted into the salt-rich bottom phase. The overall yield was 75% and the purification factor 7.3.This revised version was published online in October 2005 with corrections to the Cover Date.     

Simultaneous biosynthesis and purification of two extracellular Bacillus hydrolases in aqueous two-phase systems

Thermostable a-amylase with temperature optimum at 80 °C, molecular mass 58 kDa and pI point 6.9 was purified from a catabolite resistant Bacillus licheniformis strain. The enzyme was sensitive to inhibition by metal ions and N-bromosuccinimide. The partition behaviour of this enzyme in aqueous two-phase systems (ATPS) of the polymer-polymer-water type was investigated and some effects of type, molecular weight and concentration of phase components were studied. Up to 100% retention in the bottom phase of polyethylene glycol 10,000—20,000/dextran 200 system was reached. Best partition conditions were obtained in PEG 10,000—20,000/polyvinyl alcohol 200 systems, where the partition coefficient K increased 750 times to 7.5. Simultaneous production and purification of a-amylase and serine proteinase in PEG-polymer-water ATPS were examined. In the system PEG 6,000/ficoll, up to 90% of the amylase was retained in the bottom phase, whereas about 95% of the total protein (K = 22.8) and 60—75% of the proteinase were in the top phase. Similar separation of the enzymes from laboratory supernatant was obtained in system PEG/Na₂SO₄.     

Application of aqueous biphasic systems as strategy to purify tannase from Aspergillus tamarii URM 7115

The aims of the current study are to assess the influence of polyethylene glycol (PEG) concentration, molar mass, pH, and citrate concentrations on aqueous biphasic systems based on 2⁴ factorial designs, as well as to check their capacity to purify tannase secreted by Aspergillus tamarii URM 7115. Tannase was produced through submerged fermentation at 26°C for 67?h in Czapeck-Dox modified broth and added with yeast extract and tannic acid. The factorial design was followed to assess the influence of PEG molar mass (M_PEG 600; 4,000 and 8,000?g/?mol), and PEG (C_PEG 20.0; 22.0 and 24.0% w/w) and citrate concentrations (C_CIT 15.0, 17.5, and 20.0%, w/w), as well as of pH (6.0, 7.0, and 8.0) on the response variables; moreover, partition coefficient (K), yield (Y), and purification factor (PF) were analyzed. The most suitable parameters to purify tannase secreted by A. tamarii URM 7115 through a biphasic system were 600 (g/mol) M_PEG, 24% (w/w) C_PEG, 15% (w/w) C_CIT at pH 6.0 and they resulted in 6.33 enzyme partition, 131.25% yield, 19.80 purification factor and 195.08 selectivity. Tannase secreted by A. tamarii URM 7115 purified through aqueous biphasic systems composed of PEG/citrate can be used for industrial purposes, since it presents suitable purification factor and yield.     

Aqueous two-phase extraction for the purification of alkaline agarases from culture extracts of Pseudomonas aeruginosa AG LSL-11

The agarases were purified for the first time an using aqueous two-phase system (ATPS) consisting of polyethylene glycol (PEG) and phosphate salt. The three extracellular, alkaline agarases produced by Pseudomonas aeruginosa AG LSL-11 were efficiently extracted into the top PEG-rich layer. The influencing factors on the partition of agarases--molecular weight of the PEG, system pH, system temperature, and NaCl concentration--were investigated. All the factors were found to have a significant effect on the partition of agarases except NaCl. The optimal ATPS parameters for the partitioning and purification of agarases were found to be 12% PEG 600 and 11.9% (w/w) phosphate salt at pH 8.0 and 4°C. All three agarases were concentrated in the top PEG phase with 6.19-fold purity and 71.21% recovery. The ATPS was found to be more convenient and economical than the conventional ion-exchange chromatography (IEC) method for extraction of three agarases and could be significantly employed for the purification of agarases from fermentation broth.     

Extractive partition of L-aspartase and fumarase fromEscherichia coli using aqueous polyethylene glycol-ammonium sulfate systems

Summary Inorganic sulfate salts are used to form aqueous two-phase systems with polyethylene glycol (PEG) for enzyme purification. Two enzymes, L-aspartase and fumarase produced byEscherichia coli are efficiently separated into different phases in spite of the high degree of similarity in molecular weight and amino acid sequence between them. The ratio of L-aspartase to fumarase in the PEG-rich phase is more than sixty (60) times the ratio before extraction. A high degree of purification in a single extraction step can be achieved by careful selections of PEG molecular weight, pH, cation of the salts, and sodium chloride levels. Cations of sulfate-containing salts in the following order: NH ₄ ⁺ >Na⁺>Mg²⁺ tend to increase the partition of L-aspartase in the PEG-rich phase. The maximal degree of enzyme purification is obtained by using PEG 4000 and ammonium sulfate as a phase system at a stable pH for both enzymes.     

Effective extraction and purification of beta-xylosidase from Trichoderma koningii fermentation culture by aqueous two-phase partitioning

Effective extraction of protein from bulk medium is an important technique in bioresearch. In the present study, we describe an extracellular beta-xylosidase from the fermentation supernatant of Trichoderma koningii G-39 that was successfully extracted and purified simultaneously in a single step by using an aqueous two-phase partitioning method. This two-phase system was prepared by dissolving suitable amount of poly(ethylene glycol) (PEG) and sodium dihydrogenphosphate (NaH(2)PO(4)) in aqueous solution. beta-Xylosidase was recovered with high yield and high concentration in the bottom salt-rich phase when 25% (w/v) PEG 1500 and 20-25% (w/v) NaH(2)PO(4) were applied. Based on a 1-liter scale extraction, the purity of the enzyme was enhanced at least 33-fold. The total activity increased 422% in comparison with that in the untreated filtrate. The effectiveness and simplicity may make this technique potentially useful in various applications. The transxylosylation activity of the enzyme purified by this technique was also investigated.