Mutant isolation and cloning of the gene encoding protease VII from Escherichia coli

A mutant of Escherichia coli lacking protease VII, the outer membrane-associated protease which specifically cleaves paired basic residues (1), was isolated by using N-methyl-N'-nitro-N-nitrosoguanidine treatment. The mutant exhibited no significant change as for its growth rate and microscopic feature compared with wild cells. The gene encoding protease VII was cloned by using complementation analysis of protease VII (-) mutation. The minicell experiment showed that the gene encoded a putative precursor protein of 38,000 Mr which was processed into a protein of 36,000 Mr suggesting the presence of a signal peptide on the putative precursor.     

Studies on cytochrome c oxidase, VII. Isolation and chemical characterization of polypeptide VII.

Polypeptide VII of cytochrome c oxidase was isolated and purified by gel filtration on Bio-Gel P-10 in 10% acetic acid. Automatic Edman degradation of this peptide chain was not successful, because it is blocked at the N-terminus. The amino acid analysis shows a relatively high content of hydrophilic residues (54%). On the basis of this analysis and the apparent molecular weight by sodium dodecyl sulfate gel electrophoresis and gel filtration, a chain length of about 80 residues was calculated. Among the tryptic peptides one blocked heptapeptide was found. Cleavage of this peptide with thermolysin gave two peptide fragments, one of which was not retained on a cation exchange resin. Mass spectrometric sequence determination of this peptide revealed the structure Ac-Ala-Glu-Asp for the N-terminus of polypeptide VII. Treatment with carboxypeptidase A at two different pH values showed that the C-terminal amino acid is isoleucine and the penultimate amino acid is lysine.     

The primary structure and structural characteristics of Achromobacter lyticus protease I, a lysine-specific serine protease

The complete amino acid sequence of Achromobacter lyticus protease I (EC 3.4.21.50), which specifically hydrolyzes lysyl peptide bonds, has been established. This has been achieved by sequence analysis of the reduced and S-carboxymethylated protease and of peptides obtained by enzymatic digestion with Achromobacter protease I itself and Staphylococcus aureus V8 protease and by chemical cleavage with cyanogen bromide. The protease consists of 268 residues with three disulfide bonds, which have been assigned to Cys6-Cys216, Cys12-Cys80, and Cys36-Cys58. Comparison of the amino acid sequence of Achromobacter protease and other serine proteases of bacterial and mammalian origins has revealed that Achromobacter protease I is a mammalian-type serine protease of which the catalytic triad comprises His57, Asp113, and Ser194. It has also been shown that the protease has 9- and 26-residue extensions of the peptide chain at the N and C termini, respectively, and overall sequence homology is as low as 20% with bovine trypsin. The presence of a disulfide bridge between the N-terminal extension Cys6 and Cys216 close to the putative active site in the C-terminal region is thought to be responsible for the generation of maximal proteolytic function in the pH range 8.5-10.7 and enhanced stability to denaturation.     

Characterization of an extracellular protease inhibitor of Bacillus brevis HPD31 and nucleotide sequence of the corresponding gene.

A novel proteinaceous protease inhibitor was isolated from the culture supernatant of Bacillus brevis HPD31. The protease inhibitor of B. brevis (designated BbrPI) was produced extracellularly in multiple forms having at least three different molecular weights. One of them, BbrPI-a, was purified to near homogeneity and only showed inhibitory activity toward serine proteases, such as trypsin, chymotrypsin, and subtilisin. BbrPI was presumed to form a trypsin-inhibitor complex in a molar ratio of 1:1. The inhibitor was found to be heat resistant at neutral and acidic pHs. The gene coding for BbrPI was cloned into Escherichia coli, and its nucleotide sequence was determined. The sequence suggested that BbrPI is produced with a signal peptide of 24 amino acid residues. The amino acid sequence of the protein deduced from the DNA sequence contained the amino acid sequences of amino termini of the inhibitors, a, b, and c, and their putative precursor determined chemically. The molecular weight of the precursor was about 33,000, and the molecular weights of inhibitors a, b, and c were about 22,000, 23,500, and 24,000, respectively. It is presumed that the secreted precursor protein, which is probably inactive, is cleaved by protease into several active protease inhibitor molecules. BbrPI shows no significant homology to the protease inhibitors described previously and is unique in not having any cysteine residues in its molecule.     

Bovine factor VII. Its purification and complete amino acid sequence

A modified method for purification of blood clotting factor VII from bovine plasma was developed, and its complete amino acid sequence was established. The isolated factor VII was activated with factor XIIa, and the resulting two-chain factor VII (factor VIIa) was reduced and S-pyridylethylated or S-aminoethylated. The amino acid sequences of the S-alkylated heavy and light chains were determined by sequencing the fragments obtained from enzymatic and chemical cleavages. Fast atom bombardment mass spectrometry was also used to establish the COOH-terminal sequence of the heavy chain. The light chain consists of 152 residues with one carbohydrate chain at Asn145, and 11 gamma-carboxyglutamic acid residues are found within the NH2-terminal 35 residues. The light chain contains 0.2-0.3 mol of beta-hydroxyaspartic acid/mol of protein, indicating that an aspartic acid residue in bovine factor VII is incompletely hydroxylated. Moreover, a pentapeptide, Ala-Ser*-Ser-Pro-Cys (positions 51-55), isolated from an enzymatic digest of the light chain, contained an unknown serine derivative, but its structure is still unclear. On the other hand, the heavy chain is composed of 255 residues and one asparagine-linked carbohydrate chain at Asn203. Bovine factor VII, with a total of 407 residues, has 71% sequence identity with the human molecule (406 residues) predicted from the cDNA sequence (Hagen, F. S., Gray, C. L., O'Hara, P., Grant, F. J., Saari, G. C., Woodbury, R. G., Hart, C. E., Insley, M., Kisiel, W., Kurachi, K., and Davie, E. W. (1986) Proc. Natl. Acad. Sci. U. S. A. 83, 2412-2416).     

The nuclear-coded subunits of yeast cytochrome c oxidase. The amino acid sequences of subunits VII and VIIa, structural similarities between the three smallest polypeptides of the holoenzyme, and implications for biogenesis

The complete amino acid sequences of subunits VII and VIIa from yeast cytochrome c oxidase are reported. Subunits VII and VIIa are 57 residues (Mr = 6603) and 54 residues (Mr = 6303) in length, respectively. Both polypeptides are amphiphilic, have an internal hydrophobic section and hydrophilic NH2 and COOH termini, and terminate at their COOH termini with a basic amino acid. This structural motif is similar to that possessed by subunit VIII of yeast cytochrome c oxidase. All three polypeptides have hydrophobic sections which are long enough to span the inner membrane; all three polypeptides lack methionine at their NH2 termini; and all three polypeptides have COOH termini which could result from proteolysis by a protease with trypsin or cathepsin B-like activity. These observations raise the interesting possibility that subunits VII, VIIa, and VIII are transmembranous polypeptides which are processed at both their NH2 and COOH termini during their biogenesis.     

Characterization of an extracellular protease inhibitor of Bacillus brevis HPD31 and nucleotide sequence of the corresponding gene.

A novel proteinaceous protease inhibitor was isolated from the culture supernatant of Bacillus brevis HPD31. The protease inhibitor of B. brevis (designated BbrPI) was produced extracellularly in multiple forms having at least three different molecular weights. One of them, BbrPI-a, was purified to near homogeneity and only showed inhibitory activity toward serine proteases, such as trypsin, chymotrypsin, and subtilisin. BbrPI was presumed to form a trypsin-inhibitor complex in a molar ratio of 1:1. The inhibitor was found to be heat resistant at neutral and acidic pHs. The gene coding for BbrPI was cloned into Escherichia coli, and its nucleotide sequence was determined. The sequence suggested that BbrPI is produced with a signal peptide of 24 amino acid residues. The amino acid sequence of the protein deduced from the DNA sequence contained the amino acid sequences of amino termini of the inhibitors, a, b, and c, and their putative precursor determined chemically. The molecular weight of the precursor was about 33,000, and the molecular weights of inhibitors a, b, and c were about 22,000, 23,500, and 24,000, respectively. It is presumed that the secreted precursor protein, which is probably inactive, is cleaved by protease into several active protease inhibitor molecules. BbrPI shows no significant homology to the protease inhibitors described previously and is unique in not having any cysteine residues in its molecule.     

cDNA cloning of granzyme C, a granule-associated serine protease of cytolytic T lymphocytes

A cDNA clone corresponding to the complete amino acid sequence of a putative protease CCP2 of murine cytotoxic T lymphocytes was isolated and sequenced. The clone encodes a 248-residue long serine esterase. The deduced N-terminal amino acid sequence is identical over 40 residues to that of granzyme C, a protease of unknown function present in granules of cytotoxic lymphocytes. Analysis of the sequence of granzyme C/CCP2 reveals high homology to other granzyme proteases, i.e. granzyme A (40%) and granzyme B (67%) and to rat mast cell protease II (46%). The amino acids lining the specificity pocket are well conserved between granzyme B, C, and rat mast cell protease II, but not granzyme A, suggesting a similar general specificity of these three proteases.     

Gene identification and molecular characterization of solvent stable protease from a moderately haloalkaliphilic bacterium, Geomicrobium sp. EMB2

Cloning and characterization of the gene encoding a solvent-tolerant protease from the haloalkaliphilic bacterium Geomicrobium sp. EMB2 are described. Primers designed based on the N-terminal amino acid sequence of the purified EMB2 protease helped in the amplification of a 1,505-bp open reading frame that had a coding potential of a 42.7-kDa polypeptide. The deduced EMB2 protein contained a 35.4-kDa mature protein of 311 residues, with a high proportion of acidic amino acid residues. Phylogenetic analysis placed the EMB2 gene close to a known serine protease from Bacillus clausii KSM-K16. Primary sequence analysis indicated a hydrophobic inclination of the protein; and the 3D structure modeling elucidated a relatively higher percentage of small (glycine, alanine, and valine) and borderline (serine and threonine) hydrophobic residues on its surface. The structure analysis also highlighted enrichment of acidic residues at the cost of basic residues. The study indicated that solvent and salt stabilities in Geomicrobium sp. protease may be accorded to different structural features; that is, the presence of a number of small hydrophobic amino acid residues on the surface and a higher content of acidic amino acid residues, respectively.     

Identification, characterization and deduced amino acid sequence of the dominant protease from Kudoa paniformis and K. thyrsites: a unique cytoplasmic cysteine protease

Kudoa paniformis and Kudoa thyrsites (Myxozoa: Myxosporea) infections are associated with severe proteolysis of host muscle tissue post-mortem. The present study was undertaken to identify and characterize the protease responsible for myoliquefaction and determine mechanisms controlling protease function in vivo. N-terminal sequence analysis of partially purified protease from hake muscle infected with K. paniformis and K. thyrsites revealed a 23 amino acid sequence that aligned with cysteine proteases. Enzyme inhibition assays confirmed the presence of an essential active site cysteine residue. Using the above K. paniformis amino acid sequence data, a corresponding cDNA sequence from K. thyrsites plasmodia was elucidated revealing a cathepsin L proenzyme (Kth-CL). The translated amino acid sequence lacked a signal sequence characteristic of lysosomal and secreted proteins suggesting a unique cytoplasmic location. Only the proenzyme form of Kth-CL was present in Atlantic salmon muscle anti-mortem but this form became processed in vivo when infected muscle was stored at 4 degrees C. The proenzyme of Kth-CL showed uninhibited activity at pH 6.0, negligible activity at pH 6.5 and no measurable activity at pH 7.0 whilst the processed protease showed stability and function over a broad pH range (pH 4.5-8.8). The pH dependent processing and function of Kth-CL was consistent with histidine residues in the proregion playing a critical role in the regulation of Kth-CL.     

Molecular cloning, nucleotide sequence, and expression of the structural gene for alkaline serine protease from alkaliphilic Bacillus sp. 221.

The gene encoding an alkaline serine protease from alkaliphilic Bacillus sp. 221 was cloned in Escherichia coli and expressed in Bacillus subtilis. An open reading frame of 1,140 bases, identified as the protease gene was preceded by a putative Shine-Dalgarno sequence (AGGAGG) with a spacing of 7 bases. The deduced amino acid sequence had a pre-pro-peptide of 111 residues followed by the mature protease comprising 269 residues. The alkaline protease from alkaliphilic Bacillus sp. 221 had higher homology to the protease from alkaliphilic bacilli (82.1% and 99.6%) than to those from neutrophilic bacilli (60.6-61.7%). Also Bacillus sp. 221 protease and other protease from alkaliphilic bacilli shared common amino acid changes and 4 amino acid deletions that seemed to be related to characteristics of the enzyme of alkaliphilic bacilli when compared to the proteases from neutrophilic bacilli.     

Covalent structure of two novel neutrophile leucocyte-derived proteins of porcine and human origin. Neutrophile elastase homologues with strong monocyte and fibroblast chemotactic activities

The covalent structures of two, novel, neutrophile, leucocyte-derived, strongly basic proteins of porcine and human origin have been determined by microsequencing in combination with time-of-flight plasma desorption mass spectrometry. The porcine protein primary structure of 219 amino acid residues was shown to contain 6 cysteine residues, 2 putative carbohydrate sites and 14% basic residues. The human protein contained 221 amino acid residues of which 8 were cysteine, 4 putative carbohydrate sites and 12% basic. A 47% direct sequence similarity to human neutrophile elastase was found, but due to mutations of two of the three amino acids in the catalytic triad, proteolytic activity is absent. Modelling and alignment studies unveil a close relationship of both proteins to the serine protease family, the greatest similarity being to those serine proteases present in granules from peripheral blood cells. Both proteins have been shown to be chemotactically active for monocytes and fibroblasts in vitro.     

Cloning and analysis of WF146 protease, a novel thermophilic subtilisin-like protease with four inserted surface loops

Cloning and sequencing of the gene encoding WF146 protease, an extracellular subtilisin-like protease from the thermophile Bacillus sp. WF146, revealed that the WF146 protease was translated as a 416-amino acid precursor consisting of a putative 18-amino acid signal peptide, a 10-kDa N-terminal propeptide and a 32-kDa mature protease region. The mature WF146 protease shares a high degree of amino acid sequence identity with two psychrophilic subtilisins, S41 (68.2%) and S39 (65.4%), and a mesophilic subtilisin, SSII (67.1%). Significantly, these closely related proteases adapted to different temperatures all had four inserted surface loops not found in other subtilisins. However, unlike those of S41, S39 and SSII, the inserted loops of the WF146 protease possessed stabilizing features, such as the introduction of Pro residues into the loop regions. Interestingly, the WF146 protease contained five of the seven mutations previously found in a hyperstable variant of subtilisin S41 obtained by directed evolution. The proform of WF146 protease (pro-WF146 protease) was overexpressed in Escherichia coli in an inactive soluble form. After heat treatment, the 42-kDa pro-WF146 protease converted to a 32-kDa active mature form by processing the N-terminal propeptide. The purified mature WF146 protease hydrolyzed casein with an optimum temperature of 85 degrees C, and lost activity with a half-life of 30 min at 80 degrees C in the presence of 10 mM CaCl2.     

Purification, characterization, cloning, and expression of a glutamic acid-specific protease from Bacillus licheniformis ATCC 14580.

A glutamic acid-specific protease has been purified to homogeneity from Bacillus licheniformis ATCC 14580 utilizing Phe-Leu-D-Glu-OMe-Sepharose affinity chromatography and crystallized. The molecular weight of the protease was estimated to be approximately 25,000 by SDS-polyacrylamide gel electrophoresis. This protease, which we propose to call BLase (glutamic acid-specific protease from B. licheniformis ATCC 14580), was characterized enzymatically. Using human parathyroid hormone (13-34) and p-nitroanilides of peptidyl glutamic acid and aspartic acid, we found a marked difference between BLase and V8 protease, EC 3.4.21.9, although both proteases showed higher reactivity for glutamyl bonds than for aspartyl bonds. Diisopropyl fluorophosphate and benzyloxycarbonyl Leu-Glu chloromethyl ketone completely inhibited BLase, whereas EDTA reversibly inactivated the enzyme. The findings clearly indicate that BLase can be classified as a serine protease. To elucidate the complete primary structure and precursor of BLase, its gene was cloned from the genomic DNA of B. licheniformis ATCC 14580, and the nucleotide sequence was determined. Taking the amino-terminal amino acid sequence of the purified BLase into consideration, the clones encode a mature peptide of 222 amino acids, which follows a prepropeptide of 94 residues. The recombinant BLase was expressed in Bacillus subtilis and purified to homogeneity. Its key physical and chemical characteristics were the same as those of the wild-type enzyme. BLase was confirmed to be a protease specific for glutamic acid, and the primary structure deduced from the cDNA sequence was found to be identical with that of a glutamic acid-specific endopeptidase isolated from Alcalase (Svendsen, I., and Breddam, K. (1992) Eur. J. Biochem. 204, 165-171), being different from V8 protease and the Glu-specific protease of Streptomyces griseus which consist of 268 and 188 amino acids, respectively.     

A novel outer-membrane-associated protease in Escherichia coli.

Human gamma interferon produced by recombinant Escherichia coli was degraded by endogenous protease after cell disruption. Specific cleavages took place at the center of two pairs of basic amino acids (Lys-131-Arg-132 and Arg-142-Arg-143) in the C-terminal region, giving rise to products with molecular weights of 17,500 and 16,000. The proteolytic activity was associated with the outer membrane of E. coli. It was insensitive to the protease inhibitors diisopropylfluorophosphate, phenylmethylsulfonyl fluoride, tosyl-L-lysine chloro-methyl ketone, EDTA, and p-chloromercuribenzoate. Benzamidine and the bivalent cations Zn2+ and Cu2+ inhibited the activity. Dynorphin A(1-13) (Tyr-Gly-Gly-Phe-Leu-Arg-Arg-Ile-Arg-Pro-Lys-Leu-Lys) was a good substrate and was preferentially cleaved at the center of Arg-6-Arg-7. Neither the amino nor carboxyl sides of Arg-9 and Lys-11 were digested. These results indicate that the protease specifically cleaves the peptide bond between consecutive basic residues and therefore is different from the known membrane enzymes, proteases IV, V, and VI. We have designated this new enzyme protease VII.     

Molecular cloning,nucleotide sequence and expression of the structural gene for a thermostable alkaline protease from Bacillus sp. no. AH-101

Summary Alkaliphilic Bacillus sp. no. AH-101 produces an extremely thermostable alkaline serine protease that has a high optimum pH (pH 12–13) and shows keratinolytic activity. The gene encoding this protease was cloned in Escherichia coli and expressed in B. subtilis. The cloned protease was identical to the AH-101 protease in its optimum pH and thermostability at high alkaline pH. An open reading frame of 1083 bases, identified as the protease gene, was preceded by a putative Shine-Dalgarno sequence (AAAGGAGG) with a spacing of 11 bases. The deduced amino acid sequence revealed a pre-pro-peptide of 93 residues followed by the mature protease comprising 268 residues. AH-101 protease showed slightly higher homology to alkaline proteases from alkaliphilic bacilli (61.2% and 65.3%) than to those from neutrophilic bacilli (54.9–56.7%). Also AH-101 protease and other proteases from alkaliphilic bacilli shared common amino acid changes and a four amino acid deletion when compared to the proteases from neutrophilic bacilli. AH-101 protease, however, was distinct among the proteases from alkaliphilic bacilli in showing the lowest homology to the others.Correspondence to: H. Takami     

Synthesis, purification, and characterization of an Arg152----Glu site-directed mutant of recombinant human blood clotting factor VII

Coagulation factor VII circulates in blood as a single-chain zymogen of a serine protease and is converted to its activated two-chain form, factor VIIa, by cleavage of an internal peptide bond located at Arg152-Ile153. Previous studies using serine protease active-site inhibitors suggest that zymogen factor VII may possess sufficient proteolytic activity to initiate the extrinsic pathway of blood coagulation. In order to assess the putative intrinsic proteolytic activity of single-chain factor VII, we have constructed a site-specific mutant of recombinant human factor VII in which arginine-152 has been replaced with a glutamic acid residue. Mutant factor VII was purified in a single step from culture supernatants of baby hamster kidney cells transfected with a plasmid containing the sequence for Arg152----Glu factor VII using a calcium-dependent, murine anti-factor VII monoclonal antibody column. Purified mutant factor VII was indistinguishable from plasma-derived or recombinant wild-type factor VII by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and migrated as a single band with an apparent molecular weight of 50,000. The average specific activity of several mutant factor VII preparations was 0.00025 unit/micrograms, or 0.01% of that observed for recombinant wild-type factor VII preparations. The clotting activity of mutant factor VII was, however, completely inhibited following incubation with dansyl-Glu-Gly-Arg chloromethyl ketone, suggesting that the apparent clotting activity of mutant factor VII was due to a contaminating serine protease.(ABSTRACT TRUNCATED AT 250 WORDS)     

Genes encoding the core proteins of adenovirus type 2

The nucleotide sequence of the HindIII-D fragment of adenovirus type 2 has been determined. The sequence, which is located between coordinates 41.8 and 51.0, covers most of the L2 cotermination family. It includes three major open translational reading frames encoding the carboxyl-terminal part of the penton base as well as the major core polypeptides V and VII. An additional minor open translational reading frame encoding a highly basic polypeptide was detected in the sequence. The L2 region has a very compact organization with very short distances between the different genes, although no overlapping coding sequences were found. The predicted amino acid sequences of core proteins V and VII reveal that they are highly basic proteins and polypeptide VII resembles the arginine-rich H4 histones in its amino acid composition, but no striking similarities are apparent at the amino acid sequence level. The candidate polypeptide encoded by the newly discovered translational reading frame contains 29% basic residues and includes a hypothetical recognition sequence for the adenovirus-encoded endopeptidase. In conjunction with previously published sequences and those reported in accompanying papers (Akusj?rvi, G., Alestr?m, P., Pettersson, M., Lager, M., J?rnvall, H., and Pettersson, U. (1984) J. Biol. Chem. 259, 13976-13979; Roberts, R. J., O'Neill, K. E., and Yen, C. E. (1984) J. Biol. Chem. 259, 13965-13975) a complete sequence can now be reconstructed for the 35,937-base pairs adenovirus type 2 genome.     

Hepsin, a cell membrane-associated protease. Characterization, tissue distribution, and gene localization

Hepsin, a putative membrane-bound serine protease, was originally identified as a human liver cDNA clone (Leytus, S.P., Loeb, K.R., Hagen, F.S., Kurachi, K., and Davie, E.W. (1988) Biochemistry 27, 1067-1074). In the present study the human hepsin gene was localized to chromosome 19 at q11-13.2. The messenger RNA of hepsin is 1.85 kilobases in size and present in most tissues, with the highest level in liver. Hepsin is synthesized as a single polypeptide chain, and its mature form of 51 kDa was found in various mammalian cells including HepG2 cells and baby hamster kidney cells. It is present in the plasma-membrane in a molecular orientation of type II membrane-associated proteins, with its catalytic subunit (carboxyl-terminal half) at the cell surface, and its amino terminus facing the cytosol. Hepsin is found neither in cytosol nor in culture media. The results obtained suggest that hepsin has an important role(s) in cell growth and function.