Identification and nucleotide sequence of Rhizobium meliloti insertion sequence ISRm3: similarity between the putative transposase encoded by ISRm3 and those encoded by Staphylococcus aureus IS256 and Thiobacillus ferrooxidans IST2.

The insertion sequence ISRm3 was discovered simultaneously in different Rhizobium meliloti strains by probing Southern blots of total cellular DNA with 32P-labeled pTA2. This plasmid is indigenous to strain IZ450 and fortuitously contained four copies of ISRm3. By using an internal EcoRI fragment as a specific probe (pRWRm31), homology to ISRm3 was subsequently detected in over 90% of R. meliloti strains tested from different geographical locations around the world. The frequency of stable nonlethal ISRm3 transpositions was estimated to be 4 x 10(-5) per generation per cell in strain SU47 when grown in liquid culture. The entire nucleotide sequence of ISRm3 in R. meliloti 102F70 is 1,298 bp and has 30-bp terminal inverted repeats which are perfectly matched. Analysis of six copies of ISRm3 in two strains showed that a variable number of base pairs (usually eight or nine) were duplicated and formed direct repeats adjacent to the site of insertion. On one DNA strand, ISRm3 contains an open reading frame spanning 93% of its length. Comparison of the putative protein encoded with sequences derived from the EMBL and GenBank databases showed significant similarity between the putative transposases of ISRm3 from R. meliloti, IS256 from Staphylococcus aureus, and IST2 from Thiobacillus ferroxidans. These insertion sequences appear to be distantly related members of a distinct class.     

Nucleotide sequence of Rhizobium meliloti insertion sequence ISRm1: homology to IS2 from Escherichia coli and IS426 from Agrobacterium tumefaciens.

Nucleotide sequencing of Rhizobium meliloti insertion sequence ISRm1 showed that it is 1319 nucleotides long and includes 32/31 nucleotide terminal inverted repeats. Analysis of five different insertion sites using sequencing primers complementary to sequences within the left and right ends demonstrated that ISRm1 generates five bp direct repeats at the sites of insertion. Although ISRm1 has shown a target preference for certain short regions (hot spots), there was no apparent similarity in the DNA sequences near the insertion sites. On one strand ISRm1 contains two contiguous open reading frames (ORFs) spanning most of its length. ISRm1 was found to have over 50% sequence homology to insertion sequences IS2 from Escherichia coli and IS426 from Agrobacterium tumefaciens. Their sizes, the sequences of their inverted repeats, and the characteristics of their insertion sites are also comparable, indicating that ISRm1, IS2 and IS426 belong to a class of related insertion sequences. Comparison of the proteins potentially encoded by these insertion sequences showed that the two ORFs found in ISRm1 are also present in IS2 and IS426, suggesting that they may be functional genes.     

Distribution of insertion sequence ISRm1 in Rhizobium meliloti and other gram-negative bacteria

An internal 0.9 kb segment of Rhizobium meliloti insertion sequence ISRm1 was used as a probe to determine the distribution of ISRm1 in strains of R. meliloti and other Gram-negative bacteria. The insertion sequence was detected in 80% (12/15) of R. meliloti strains from different parts of the world. Its copy number ranged from one to at least eleven. The ISRm1 copies detected showed variation in their internal restriction sites and their degree of homology to the probe. ISRm1 was found in a variety of genomic restriction fragments, and was detected in plasmids, including the nod and exo megaplasmids of R. meliloti. Other rhizobia found to contain ISRm1 were a strain of R. leguminosarum biovar phaseoli and two Rhizobium isolates capable of nodulating both Medicago sativa and Phaseolus vulgaris. It was also found in a diazotrophic soil bacterium isolated from the roots of wetland rice.     

Sequence of ISRm4 from Rhizobium meliloti strain GR4.

ISRm4, an IS-like sequence structurally similar to Pseudomonas cepacia insertion element IS402, was identified by sequence analysis. This 933-bp element carries 17-bp putative terminal inverted repeats with five mismatches and a putative direct target duplication of 3 bp.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

Rhizobium meliloti insertion element ISRm2 and its use for identification of the fixX gene.

Two of the three plasmids of the wild-type Rhizobium meliloti 41 (pRme41a and pRme41c) carry a copy of ISRm2, a 2.7-kilobase-long transposable element. ISRm2 is terminated by 22-base-pair (bp) inverted repeat sequences, exhibiting some homology to the inverted repeats of elements generating 9-bp target sequence duplication. Transposition of ISRm2 results in a duplication of 8 bp in length, rather rare among transposable elements. DNA sequences homologous to an internal fragment of ISRm2 were found in several Rhizobium species. Transposition of ISRm2 into fixation and nodulation genes located on the symbiotic plasmid pRme41b was detected at a high frequency. Exact locations of two copies of ISRm2 which transposed into the nod-nif region on the megaplasmid were determined. In one case, integration into the protein-coding region of the hsnD gene that determines a host specificity function of nodulation occurred. In the other mutant, ISRm2 was localized upstream of nifA, where a short open reading frame coding for a new fix gene (fixX) was identified. The product of fixX is a ferredoxin carrying a characteristic cluster of cysteine residues. On the basis of the observation that the arrangement of the ISRm2 copies is identical in the free-living wild-type cells and in nitrogen-fixing nodules, we concluded that the involvement of ISRm2 transposition in the development of nitrogen-fixing symbiosis is unlikely.     

IS421, a new insertion sequence in Escherichia coli

The nucleotide sequence of a new insertion sequence (IS) in Escherichia coli, IS421, was determined. It is 1340 bp long and contains inverted repeats of 22 bp at its termini. It is flanked by 13 bp direct repeats apparently generated upon insertion. There are two ORFs longer than 200 bp in IS421. One can encode a polypeptide of 371 amino acids (aa) and the other, which is on the other strand, can encode a polypeptide of 102 aa. The C-terminal part of the 371 aa polypeptide shows some homology to that of transposases encoded in some other known IS elements. The copy number of IS421 in chromosomal DNA was 4 for E. coli K-12 and B, and 5 for E. coli C, as determined by the Southern hybridization of restriction fragments.     

Characterization of IS666, a newly described insertion element of Mycobacterium avium

The insertion sequence IS666 was isolated from Mycobacterium avium strain 101. IS666 is a 1474 bp insertion sequence belonging to the IS256 family, that includes IS6120 from Mycobacterium smegmatis, IS1166 and IS1295 from Rhodococcus sp. IGTS8, IST2 from Thiobacillus ferrooxidans, IS256 from Staphylococcus aureus, and ISRm3 from Rhizobium meliloti. IS666 has 24 bp imperfect inverted repeats that fit the consensus described for the family, and generates 9 bp duplications upon insertion into the host DNA with no apparent specificity in the target sequence. In contrast with its two closest homologues, IS1166 and IS6120, IS666 contains a single ORF that would codify a transposase of 434 aa. IS666 is restricted to M. avium, where it is present in 21% of the isolates in a number ranging between 1 to 7 copies.     

Isolation and analysis of IS6120, a new insertion sequence from Mycobacterium smegmatis

Insertion sequence IS6120 from Mycobacterium smegmatis was identified by its ability to transpose into different sites in the lambda repressor gene, cl857, carried on an Escherichia coli/mycobacteria shuttle plasmid. IS6120 is a novel 1.5 kb insertion sequence, which has 24-bp imperfect terminal inverted repeats and generates 9-bp duplications of the target DNA following insertion. IS6120 is present in at least three copies in M. smegmatis but was not found in other species, including Mycobacterium tuberculosis. Nucleotide sequence analysis revealed that IS6120 contains two open reading frames, one of which encodes a putative transposase with similarities to those found in IS256 from Staphylococcus aureus, IST2 from Thiobacillus ferrooxidans, and ISRm3 from Rhizobium meliloti. The fact that IS6120 does not recognize a consensus target sequence for insertion and has no homologous sequences in the other strains studied makes IS6120 useful for transposon mutagenesis in mycobacteria.     

Isolation and characterization of IS1165, an insertion sequence of Leuconostoc mesenteroides subsp. cremoris and other lactic acid bacteria.

We have cloned and characterized an insertion sequence from Leuconostoc mesenteroides subsp. cremoris strain DB1165. This element, designated IS1165, is 1553 bp, has imperfect inverted repeat ends, contains an open reading frame of 1236 bp, and is not related to any previously described insertion sequence. The copy number of IS1165 varies from 4 to 13 in L. mesenteroides subsp. cremoris strains allowing genetic fingerprinting of strains based on location and number of bands on hybridization. IS1165 or closely related elements have been detected by hybridization in L. lactis, L. oenos, Pediococcus sp., Lactobacillus helveticus, and Lb. casei but not in Lactococcus.     

A new insertion sequence from Sinorhizobium meliloti with homology to IS1357 from Methylobacterium sp. and IS1452 from Acetobacter pasteurianus

The insertion sequence ISRm8 was identified by sequence analysis of the cryptic plasmid pRmeGR4b of Sinorhizobium meliloti GR4. ISRm8 is 1451 bp in length and carries 22/24-bp terminal imperfect inverted repeats with seven mismatches and a direct target site duplication of 3 bp. ISRm8 carries a unique open reading frame whose putative protein showed significant similarity to the insertion sequences IS1357 and IS1452, isolated from Methylobacterium sp. and Acetobacter pasteurianus, respectively. Two copies of this IS element were found in strain GR4; one of them is linked to plasmid pRmeGR4b, whereas the other is localized out of the non-pSym plasmids. In S. meliloti field populations ISRm8 shows a limited distribution (50% of the strains tested carry the IS element), with a copy number ranging from 1 to 6.     

Sequence and distribution of IS1312: evidence for horizontal DNA transfer from Rhizobium meliloti to Agrobacterium tumefaciens.

Two novel insertion sequences, IS1312 and IS1313, were found in pTiBo542, the Ti plasmid of Agrobacterium tumefaciens strains Bo542 and A281. Nucleotide sequencing and Southern hybridization revealed that IS1312 and IS1313 are homologous to Rhizobium meliloti ISRm1 and ISRm2, respectively. IS1312, ISRm1, and another Agrobacterium insertion sequence, IS426, belong to the same IS3 family of insertion sequences; however, IS1312 is more closely related to the Rhizobium ISRm1 than it is to the Agrobacterium IS426. The distribution patterns of these insertion elements and their sequence similarities suggest that IS1312 and IS1313 were horizontally transferred from R. meliloti to A. tumefaciens.     

Identification of an insertion sequence, IS1081, in Mycobacterium bovis

Abstract: An insertion sequence, IS1081, in the genome of Mycobacterium bovis has been identified and sequenced. It is 1324 bp long with 15 bp inverted repeat ends and contains a large ORF. There are six copies of IS1081 in the genome of M. bovis and the element is also present in Mycobacterium tuberculosis . IS1081 is not closely related to other DNA elements described in actinomycetes but its putative transposase bears some resemblance to that of IS256 from Staphylococcus aureus . IS1081 may be useful for genetic manipulations and for developing a diagnostic test for bovine tuberculosis based on the polymerase chain reaction.     

ISRm4-1 and ISRm9, two novel insertion sequences from Sinorhizobium meliloti

Two novel insertion sequences, ISRm4-1 and ISRm9 have been identified in Sinorhizobium meliloti. ISRm4-1 is 936-bp in length, flanked by 17-bp putative terminal inverted repeats and a putative target duplication of 3-bp. ISRm4-1 is a member of the IS5 family of insertion sequences, closely related to ISRm4. ISRm9 is 2797-bp in length and carries 25-bp inverted repeats with target duplication of 7-bp. ISRm9 belongs to the IS21 family of insertion elements. On the non-pSym plasmid pRmeGR4b from S. meliloti strain GR4, a copy of ISRm4-1 is interrupted at nucleotide 150 from its 5′-end by a copy of ISRm9. Whereas ISRm4-like elements are widespread in S. meliloti, the distribution of ISRm9 appears to be correlated to that of pRmeGR4b-type plasmids.     

Isolation of an insertion sequence (IS1051) from Xanthomonas campestris pv. dieffenbachiae with potential use for strain identification and characterization.

A new insertion sequence was isolated from Xanthomonas campestris pv. dieffenbachiae. Sequence analysis showed that this element is 1,158 bp long and has 15-bp inverted repeat ends containing two mismatches. Comparison of this sequence with sequences in data bases revealed significant homology with Escherichia coli IS5. IS1051, which detected multiple restriction fragment length polymorphisms, was used as a probe to characterize strains from the pathovar dieffenbachiae.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

A new insertion sequence element,ISLdl1, in Lactobacillus delbrueckii subsp. lactis ATCC 15808

A new insertion sequence element designated ISLdl1 has been isolated and characterized from Lactobacillus delbrueckii subsp. lactis ATCC 15808. It is the first IS element of L. delbrueckii subsp. lactis described. ISLdl1 is a 1508 bp element flanked by 26 bp imperfect inverted repeats, and generates an 8 bp AT-rich target duplication upon insertion. It contains one ORF encoding a protein of 455 amino acids. This protein shows significant homology to the transposases of the ISL3 family and to other bacterial transposases and putative transposases, and no homology to other proteins. Based on these structural features, ISLdl1 belongs to the ISL3 family. ISLdl1 is present in about 10-12 copies in the genome of ATCC 15808 based on Southern hybridization analysis. Location sites of eight ISLdl1 copies have been determined in more detail by cloning and sequencing one or both of the flanking regions of each ISLdl1 copy. ISLdl1 or ISLdl1-like IS elements were found exclusively in Lactobacillus delbrueckii species and in all strains of subsp. lactis tested. The nucleotide sequence of ISLdl1 is deposited under the accession number AJ302652.