Optimization of fermentation conditions for alcohol production

The quantitative effects of carbohydrate levels, degree of initial saccharification, glucoamylase dosage, temperature, and fermentation time were investigated using a Box-Wilson central composite design protocol. With Saccharomyces cerevisiae ATCC 4126, it was found that the use of a partially saccharified starch substrate markedly increased yields and attainable alcohol levels. Balancing the degree of initial saccharification with the level of glucoamylase used to complete hydrolysis was found necessary to obtain optimum yields. The temperature optimum was found to be 36 degrees C. The regression equations obtained were used to model the fermentation in order to determine optimum fermentation conditions.     

星形孢菌素的发酵条件优化

提高抗生素在产生菌中的表达效价,从而降低生产成本,是实现抗生素生产应用的重要基础.星形孢菌素是一种非特异性的蛋白激酶抑制剂,能够诱导多种类型的细胞凋亡,但目前星形孢菌素生产菌株的表达效价均较低,达不到生产要求,使其应用受到限制[1-4].     

Optimization of cellulase production in batch fermentation byTrichoderma reesei

Maximum cellulase production was sought by comparing the activities of the cellulases produced by differentTrichoderma reesei strains andAspergillus niger. Trichoderma reesei Rut-C30 showed higher cellulase activity than otherTrichoderma reesei strains andAspergillus niger that was isolated from soil. By optimizing the cultivation condition during shake flask culture, higher cellulase production could be achieved. The FP (filter paper) activity of 3.7 U/ml and CMCase (Carboxymethylcellulase) activity of 60 U/ml were obtained from shake flask culture. When it was grown in 2.5L fermentor, where pH and DO levels are controlled, the Enzyme activities were 133.35 U/ml (CMCase) and 11.67 U./ml (FP), respectively. Ammonium sulfate precipitation method was used to recover enzymes from fermentation broth. The dried cellulase powder showed 3074.9 U/g of CMCase activity and 166.7 U/g of FP activity with 83.5% CMCase recovery.     

Optimization of fermentation conditions for ethanol production from whey

Summary Optimal conditions for ethanol production in 7% whey solutions by the yeast Candida pseudotropicalis ATCC 8619 included initial pH of 4.57 and 30°C. Complete fermentation of the available lactose took place without supplementary nutrients; additions of nitrogen or phosphorus salts, yeast extract or corn steep liquor resulted in increased yeast production and lower ethanol yields. A positive correlation was observed between increases in yeast inocula and lactose utilization and ethanol production rates; 8.35 g/l of ethanol was obtained within 22 h by using yeast inoculum of 13.9 g/l. No differences in fermentation rates or ethanol yields were observed when whole or deproteinized whey solutions were used. Concentrated whey permeates, obtained after removal of the valuable proteins from whey, can be effectively fermented for ethanol production.     

Optimization of fermentation conditions for thermostable cellulase production byThielavia terrestris

Summary Of the eighteen different carbon sources, solka floc was optimal for the induction of cellulases by the thermophilic fungusThielavia terrestris. The temperature optimum for growth was between 44–52°C. The effect of initial and controlled pH on fungal growth and cellulase production was investigated and the results obtained showed that the maximum volumetric productivity (6.07 I.U./1 per h) of filter paper activity was achieved when the pH was controlled at 4.5–5.0.     

类球红细菌发酵生产类胡萝卜素条件优化

本文对类球红细菌3757产类胡萝卜素进行了发酵条件优化,结果得到了较优的培养基组成:葡萄糖2%,苹果酸钠0.5%,酵母浸粉1.3%,硫酸铵0.9%,磷酸氢二钾0.09%,磷酸二氢钾0.06%,生长因子溶液1%,p H 8.0;其中,生长因子溶液配方:维生素B1 0.1%,烟酰胺(VPP)0.1%,生物素0.0016%。较优培养条件为:接种量5%,转速200 r/min,种龄24 h,发酵温度32℃,发酵时间40 h。优化后类胡萝卜素产率较优化前提高了76.2%。     

类球红细菌SOD发酵条件优化

本文对类球红细菌3757产SOD进行了发酵条件优化,结果得到了较优的培养基组成(g/L):苹果酸3,胰蛋白胨4,磷酸氢二钾0.9,磷酸二氢钾O.6,硫酸镁0.2,无水氯化钙0.075,硫酸亚铁0.012,EDATA 0.02,微量元素溶液10 mL,生长因子溶液10 mL,pH 7.5。其中,微量元素溶液配方(g/L):硼酸2.8,硫酸锰1.6,钼酸钠0.76,硫酸锌0.24,硫酸铜0.04;生长因子溶液配方(g/L):维生素B_1 1,烟酰胺(VPP)1,生物素0.016,对氨基苯甲酸1。较优培养条件为:接种量5%,转速150 r/min,种龄24 h,发酵温度32℃,发酵时间24 h。优化后酶活力较优化前提高了88.0%。     

5-酮基-D-葡萄糖酸发酵生产的工艺条件优化

葡萄糖酸氧化杆菌可将葡萄糖转化为5-酮基-D-葡萄糖酸(5-KGA),而5-KGA是重要食品添加剂L(+)-酒石酸的合成前体。为提高5-KGA产量及其对葡萄糖的转化率,对5-KGA发酵生产的工艺条件进行优化。在摇瓶水平最适的培养基和培养条件下,5-KGA最高产量为19.7 g/L,较优化前提高43.8%。在5 L发酵罐上控制恒定pH值5.5、溶氧浓度15%条件下,5-KGA产量达到46.0 g/L,较摇瓶最高产量提高1.3倍,应用葡萄糖流加工艺,5-KGA最高产量达到75.5 g/L,转化率超过70%,与已见报道的最高水平相比提高了32.0%,为实现微生物发酵生产5-KGA、进而合成L(+)-酒石酸的工业化提供了切实有效的途径。     

辅酶Q_(10)产生菌发酵条件的优化

对辅酶Q10生产菌株鞘氨醇单胞菌YZ0803的发酵条件进行优化,确定发酵时间为90 h,250 mL摇瓶装液量为30 mL。培养基组成(质量分数,下同):葡萄糖1.5%,淀粉2.5%,黄豆饼粉2.5%,(NH4)2SO40.5%,NaCl0.03%,K2HPO40.02%,MgSO40.005%。优化后的辅酶Q10产量达到192 mg/L,比采用基础培养基的产量(138mg/L)提高了39.13%。     

Optimization of fermentation conditions for production of exopolysaccharide by Bacillus polymyxa

Production of exopolysaccharide (EPS) from a strain of Bacillus polymyxa was studied. Sucrose and potassium nitrate were found to be efficient carbon and nitrogen sources, respectively, for the production of the EPS. EPS production increased with the increase of sucrose concentration, probably due to the facilitated carbon uptake. Optimal pH was 7–8, and a sufficient supply of oxygen was needed for the EPS production. It was noted that the EPS synthesis by this B. polymyxa was growth-associated, indicating that a sufficient supply of nutrients was required for a high production of the EPS. As high as 54?g/l of EPS with a yield of 63% (g EPS/g sucrose) was obtained in 48?h of fed-batch cultivation with intermittent feeding of sucrose and potassium nitrate.     

Optimization of bacteriocin production by batch fermentation of Lactobacillus plantarum LPCO10

Optimization of bacteriocin production by Lactobacillus plantarum LPCO10 was explored by an integral statistical approach. In a prospective series of experiments, glucose and NaCl concentrations in the culture medium, inoculum size, aeration of the culture, and growth temperature were statistically combined using an experimental 2(3)(5-2) fractional factorial two-level design and tested for their influence on maximal bacteriocin production by L. plantarum LPCO10. After the values for the less-influential variables were fixed, NaCl concentration, inoculum size, and temperature were selected to study their optimal relationship for maximal bacteriocin production. This was achieved by a new experimental 3(2)(3-1) fractional factorial three-level design which was subsequently used to build response surfaces and analyzed for both linear and quadratic effects. Results obtained indicated that the best conditions for bacteriocin production were shown with temperatures ranging from 22 to 27 degrees C, salt concentration from 2.3 to 2.5%, and L. plantarum LPCO10 inoculum size ranging from 10(7.3) to 10(7.4) CFU/ml, fixing the initial glucose concentration at 2%, with no aeration of the culture. Under these optimal conditions, about 3.2 x 10(4) times more bacteriocin per liter of culture medium was obtained than that used to initially purify plantaricin S from L. plantarum LPCO10 to homogeneity. These results indicated the importance of this study in obtaining maximal production of bacteriocins from L. plantarum LPCO10 so that bacteriocins can be used as preservatives in canned foods.     

Effect of culture conditions on lipase production by Fusarium solani in batch fermentation

Lipase (Glycerol ester hydrolase EC 3.1.1.3.) from a Brazilian strain of Fusarium solani FSI has been investigated. The effect of different carbon sources and trace elements added to basal medium was observed with the aim of improving enzyme production. Lipase specific activity was highest (0.45 U mg(-1)) for sesame oil. When this medium was supplemented with trace elements using olive oil, corn oil and sesame oil the lipase specific activity increased to 0.86, 1.89 and 1.64 U mg(-1), respectively, after 96 h cultivation without any considerable biomass increase. The Km of this lipase using pNPP (p-nitrophenylpalmitate) as substrate, was 1.8 mM with a Vmax of 1.7 micromol min(-1) mg protein(-1). Lipase activity increased in the presence of increasing concentrations of hexane and toluene. In contrast, incubation of this enzyme with water-soluble solvents decreased its activity after 10% concentration (v/v) of the solvent. The lipase activity was stable below 35 degrees C but above this temperature activity losses were observed.     

液态发酵豆粕制备纳豆激酶方法的优化

纳豆激酶是一种丝氨酸蛋白酶,具有很强的纤溶活性,由于具有安全性好、作用迅速持久、成本低等优点,适合用于开发新一代的溶栓剂或保健食品,具有广阔的市场前景。本研究探讨了以豆粕为原料液态发酵豆粕生产纳豆激酶的发酵方法。首先通过单因素实验发现影响产酶的主要因素有接菌量、发酵时间、培养基pH及豆粕含量,再由正交实验得到最优组合为接菌量1%,豆粕含量2%,pH为7.0,发酵时间48h,该条件下发酵酶活力最高达到4 429.6U/mL。本研究确定了以豆粕为原料制备纳豆激酶的最佳条件,为豆粕的合理使用和纳豆激酶的工业化生产提供了实验依据。     

Optimization of fermentation conditions for the production of ethylene-diamine-disuccinic acid by Amycolatopsis orientalis

The production of EDDS (ethylene-diamine-disuccinic acid), a potential substitute for EDTA, has been optimized up to a product concentration of 20 grams per litre in fermentations of Amycolatopsis orientalis. Decisive steps for the increase in productivity were variation of the synthetic medium composition, investigation of the influence of metal ions on product formation, controlled feeding of carbon and nitrogen sources in fed-batch fermentations and improvement of the downstream processing steps. Received 05 May 1997/ Accepted in revised form 13 August 1997     

重组大肠杆菌产尿素酶B高密度发酵条件的优化

探究重组大肠杆菌产尿素酶B（urease B subunit, UreB）的高密度发酵条件。通过实验室摇瓶和30 L发酵罐对UreB基因工程菌的发酵条件进行优化。结果表明：30 L发酵罐中以TB培养基为发酵培养基,接种量为5%,发酵温度为37 ℃,pH为6.8,溶氧量为30%左右,培养至2 h开始恒速流加50%甘油,4 h流加50%酵母提取物和50%胰蛋白胨,并加入终浓度为0.5 mmol/L的异丙基β-D-硫代半乳糖苷（isopropyl β-D-thiogalactoside,IPTG),诱导表达4 h,结束发酵,所得菌体干物质约为25.7 g/L,UreB表达量为31.4%。此工艺可以提高UreB的产量。     

出芽短梗霉产聚苹果酸发酵条件的优化

【背景】出芽短梗霉可发酵葡萄糖生成聚苹果酸,但存在转化率和转化效率低等瓶颈,阻碍其实现商业化生产。【目的】通过优化发酵培养条件,提高出芽短梗霉的聚苹果酸产量、糖酸转化率和生产强度。【方法】采用单因素试验优化适宜出芽短梗霉BK-10菌株产生聚苹果酸的培养条件,通过Plackett-Burman法对培养基组分筛选显著性影响因素,并对其培养基中无机盐进行正交试验优化,最后进行5 L发酵罐验证。【结果】最优培养基配方和培养条件:100 g/L葡萄糖,1.5 g/L尿素,0.20 g/L KH_2PO_4,0.20 g/L ZnSO_4,0.05 g/L MgSO_4,0.75 g/L KCl,30 g/L CaCO_3,0.01%吐温-80,发酵温度26°C,250 mL摇瓶装液量50 mL。【结论】通过优化,聚苹果酸的糖酸转化率达到0.71 g/g,生产强度达到0.89 g/(L·h),较优化前分别提高了18.33%和71.15%,为发酵葡萄糖合成聚苹果酸进而生产L-苹果酸工艺的工业化生产奠定经济性基础。     

粘性嗜热链球菌ST-1产胞外多糖发酵条件优化

应用响应面法对一株粘性嗜热链球菌ST-1的产胞外多糖的发酵条件进行了优化.根据单因素的实验结果,选取接种量,发酵温度,发酵时间作为考察因素,以胞外多糖的产量作为响应值,利用Box-Behnken实验设计方法,建立了胞外多糖产量与三个考察因素之间的回归方程并得到最佳发酵条件为:接种量5%,发酵时间14 h,发酵温度42℃...     

吸水链霉菌ATCC 29253产Hygrocin A发酵条件的优化

【背景】Hygrocins是一种萘安莎抗生素,具有良好的新药开发潜能。但在常见培养基及发酵条件下菌体内Hygrocin A含量一般很低,甚至难以直接进行准确检测。【目的】提高吸水链霉菌ATCC 29253发酵物中Hygrocin A的产量。【方法】采用单因素与正交试验设计优化相结合的方法系统考察碳源、氮源、磷酸盐、MgCl_2浓度、NaCl浓度、种子菌龄等因素对吸水链霉菌ATCC 29253产Hygrocin A能力的影响。【结果】最佳发酵条件为(g/L):葡萄糖4.0,黄豆饼粉8.0,麦芽提取物10.0,K_2HPO_4 1.5,KH_2PO_4 1.5,NaCl 1.5,Mg Cl2 1.0;种子最佳活化时间为48 h;培养参数:摇床转速200 r/min,初始pH为6.8-7.0,瓶装量50 m L/250 m L,接种量5%,30°C培养10 d。在优化条件下,Hygrocin A产量与其原始培养基M10相比提高了500%,Rapamycin产量同时下降了95%。【结论】通过培养基优化,可显著提高吸水链霉菌ATCC 29253中Hygrocin A产量,为Hygrocin A合成应用研究奠定基础,同时可使Rapamycin产量明显下降。这说明可通过选择培养条件有目的地调节两种抗生素的代谢通量,进而开展多种抗生素同时表达的代谢调控研究。     

响应面法对微拟球藻产微藻蛋白的发酵条件优化

以稳定期微藻蛋白浓度为评价指标,利用响应面设计对微拟球藻(Nannochloropsis gaditana)的分批发酵条件进行优化。在单因素试验的基础上,选取温度、p H、搅拌速度及通气量为影响因子,采用四因素三水平的Box-Benhnken中心组合法设计试验。结果表明:微拟球藻的最佳发酵条件为温度30℃、p H 6.9、搅拌速度340 r/min以及通气量0.65 vvm,在此优化条件下得到微藻蛋白浓度为6.18 g/L,与模型预测值基本相符,较优化前提高了9.18%。     

Optimization of batch fermentation processes. II. Optimum temperature profiles for batch penicillin fermentations

Optimization methods based on the continuous maximum principle and the calculus of variations were used to calculate optimum temperature profiles for batch penicillin fermentations. These methods were first applied to several general models to develop effective techniques for the numerical solution of the equations. Subsequently, these methods were applied to two particular models, derived from experimental data, and the optimum temperature profiles were determined. The results indicated that an improvement, in penicillin yield of about 15% was possible if the optimum temperature profiles were followed.