Integration of the Aedes aegypti mosquito genetic linkage and physical maps

Two approaches were used to correlate the Aedes aegypti genetic linkage map to the physical map. STS markers were developed for previously mapped RFLP-based genetic markers so that large genomic clones from cosmid libraries could be found and placed to the metaphase chromosome physical maps using standard FISH methods. Eight cosmids were identified that contained eight RFLP marker sequences, and these cosmids were located on the metaphase chromosomes. Twenty-one cDNAs were mapped directly to metaphase chromosomes using a FISH amplification procedure. The chromosome numbering schemes of the genetic linkage and physical maps corresponded directly and the orientations of the genetic linkage maps for chromosomes 2 and 3 were inverted relative to the physical maps. While the chromosome 2 linkage map represented essentially 100% of chromosome 2, approximately 65% of the chromosome 1 linkage map mapped to only 36% of the short p-arm and 83% of the chromosome 3 physical map contained the complete genetic linkage map. Since the genetic linkage map is a RFLP cDNA-based map, these data also provide a minimal estimate for the size of the euchromatic regions. The implications of these findings on positional cloning in A. aegypti are discussed.     

Map error reduction: using genetic and sequence-based physical maps to order closely linked markers

The Marshfield comprehensive genetic maps are frequently used for linkage and association studies, however, for some regions of these maps the marker order has low level of likelihood ratio support. In order to investigate the level of statistical support and the accuracy of the genetic maps compared to sequence-based physical maps, two approximately 30 cM autosomal regions were selected. The first region was selected from chromosome 3 and consisted predominately of draft sequence. The second region was selected from chromosome 21 and consisted of finished sequence data. The physical order of these markers was based upon their position on Celera (CEL) and Human Genome Project-Santa Cruz (HGP-sc) sequence-based physical maps. The chromosome 3 and 21 regions contained 100 and 61 markers, respectively, on the Marshfield genetic map. The genetic and physical map order was consistent for 88.9 and 89.2% of the markers in the region on chromosome 3 and 21, respectively. Using a novel scoring criterion to assess inconsistent marker order between genetic and physical maps, it was determined that the physical order was likely the correct order for 3.3 and 7.1% of the markers in the chromosome 3 and 21 regions, respectively. To increase the accuracy of the order of markers selected for fine mapping a method is presented which combines information from genetic and sequence-based physical maps.     

Integration of the PiGMaP and USD A maps for porcine chromosome 14

In order to align two previously published genetic linkage maps, a set of four of the United States Department of Agriculture (USDA) microsatellite linkage markers was mapped in the International Pig Gene Mapping Project (PiGMaP) reference families. Two-point linkage analysis was used between these USDA markers and the set of genes and markers previously mapped on the PiGMaP chromosome 14 map-Markers with threshold lod scores of three or greater were used for multipoint map construction. The USDA and PigGMaP linkage maps of chromosome 14 were aligned using the four USDA microsatellite markers along with three markers that are common to both maps. The PiGMaP genetic linkage map order for chromosome 14 was confirmed and the map was expanded to 193 cM with addition of the new markers.     

A primary genetic map of chromosome 13q.

We have constructed a primary genetic map spanning most of human chromosome 13. A total of 14 polymorphic DNA sequences and one protein polymorphism provided, after construction of haplotypes, seven markers for the long arm of this chromosome. A panel of cell lines from 30 three-generation families with large sibship size served as the sample set. Pairwise cross analysis of the inheritance patterns of the marker loci established that six of the seven loci constituted a single linkage group; the seventh was localized by physical means. Significantly higher recombination rates were found in female than in male meioses in several intervals. The six closely linked loci were arranged, based on the two-point data, in three clusters, and a number of alternate gene orders were excluded by three-point linkage tests. The order and spacing of the individual loci were refined by linkage analyses that considered five loci jointly.     

Statistical aspects of genetic mapping in autopolyploids.

Many plant species of agriculture importance are polyploid, having more than two copies of each chromosome per cell. In this paper, we describe statistical methods for genetic map construction in autopolyploid species with particular reference to the use of molecular markers. The first step is to determine the dosage of each DNA fragment (electrophoretic band) from its segregation ratio. Fragments present in a single dose can be used to construct framework maps for individual chromosomes. Fragments present in multiple doses can often be used to link the single chromosome maps into homologous groups and provide additional ordering information. Marker phenotype probabilities were calculated for pairs of markers arranged in different configurations among the homologous chromosomes. These probabilities were used to compute a maximum likelihood estimator of the recombination fraction between pairs of markers. A likelihood ratio test for linkage of multidose markers was derived. The information provided by each configuration and power and sample size considerations are also discussed. A set of 294 RFLP markers scored on 90 plants of the species Saccharum spontaneum L. was used to illustrate the construction of an autopolyploid map. Previous studies conducted on the same data revealed that this species of sugar cane is an autooctaploid with 64 chromosomes arranged into eight homologous groups. The methodology described permitted consolidation of 54 linkage groups into ten homologous groups.     

Fast and Accurate Construction of Ultra-Dense Consensus Genetic Maps Using Evolution Strategy Optimization

Our aim was to develop a fast and accurate algorithm for constructing consensus genetic maps for chip-based SNP genotyping data with a high proportion of shared markers between mapping populations. Chip-based genotyping of SNP markers allows producing high-density genetic maps with a relatively standardized set of marker loci for different mapping populations. The availability of a standard high-throughput mapping platform simplifies consensus analysis by ignoring unique markers at the stage of consensus mapping thereby reducing mathematical complicity of the problem and in turn analyzing bigger size mapping data using global optimization criteria instead of local ones. Our three-phase analytical scheme includes automatic selection of ~100-300 of the most informative (resolvable by recombination) markers per linkage group, building a stable skeletal marker order for each data set and its verification using jackknife re-sampling, and consensus mapping analysis based on global optimization criterion. A novel Evolution Strategy optimization algorithm with a global optimization criterion presented in this paper is able to generate high quality, ultra-dense consensus maps, with many thousands of markers per genome. This algorithm utilizes "potentially good orders" in the initial solution and in the new mutation procedures that generate trial solutions, enabling to obtain a consensus order in reasonable time. The developed algorithm, tested on a wide range of simulated data and real world data (Arabidopsis), outperformed two tested state-of-the-art algorithms by mapping accuracy and computation time.     

Twelve loci form a continuous linkage map for human chromosome 18

We have constructed a primary genetic map of human chromosome 18 consisting of 11 DNA markers and one serological marker (JK). Two of these loci define highly polymorphic VNTR systems. The markers define a continuous genetic linkage map of 97 cM in males and 205 cM in females; female genetic distances in a panel of 59 three-generation families were consistently about twice those observed in males. The high odds in support of the linear order of the markers on this recombination map, and the extent of coverage of chromosome 18, indicate that this map will permit efficient linkage studies of human genetic diseases that may be segregating on chromosome 18 and will provide anchor points for development of high-resolution maps for this chromosome.     

The integration of canine genetic maps with the canine karyotype using specific gene amplification of chromosome-specific DNA

We have used a rapid approach to place markers that are already represented in current genetic maps onto individual chromosomes in species for which chromosome paints exist. PCR-based techniques are used to look for the presence of individual marker genes within each chromosome-specific DNA pool. The presence of a given marker within a DNA pool allows assignment of the complete radiation hybrid group, or linkage group from which the marker is drawn, to an individual chromosome. We have used this method with a new set of canine chromosome paints (Yang et al., 1999). In this way, we have assigned 39 of 44 published RH or syntenic RH groups to canine chromosomes, together with 33 of 40 canine linkage groups in a recently published map (Neff et al., 1999).     

Genetic mapping of 14 short tandem repeat polymorphisms on human chromosome 22

We have constructed a linkage map of 14 short tandem repeat polymorphisms (11 with heterozygosity > 70%) on the long arm of human chromosome 22 using 23 non-CEPH pedigrees. Twelve of the markers could be positioned uniquely with a likelihood of at least 1,000:1, and distributed at an average distance of 6.62 cM (range 1.5–16.1 cM). The sex-combined map covers a total of 79.6 cM, the female map 93.2 cM and the male map 64.6 cM. Based on comparisons between physical maps and other genetic maps, we estimate that our map covers 70%–80% of the chromosome. The map integrates markers from previous genetic maps and uniquely positions one marker (D22S307). Data from physical mapping on the location of four genetic markers correlates well with our linkage map, and provides information on an additional marker (D22S315). This map will facilitate high resolution mapping of additional polymorphic loci and disease genes on chromosome 22, and act as a reference for building and verifying physical maps.     

A 2-cM genetic linkage map of human chromosome 7p that includes 47 loci.

A new high-resolution genetic linkage map for human chromosome 7p has been constructed. The map is composed of 47 loci (54 polymorphic systems), 19 of which are uniquely placed with odds of at least 1000:1. Four genes are represented, including glucokinase (GCK, ATP:D-hexose-6-phosphotransferase, EC 2.7.1.2) which was mapped via a (CA)n dinucleotide repeat polymorphism. The sex-average map measures 94.4 cM and the male and female maps measure 73.2 and 116.1 cM, respectively. We believe that the genetic map extends nearly the full length of the short arm of chromosome 7 since a centromere marker has been incorporated, and the most distal marker, D7S21, has been cytogenetically localized by in situ hybridization to 7p22-pter. The average marker spacing is 2 cM, and the largest interval between uniquely placed markers is 13 cM (sex-average map). Overall, female recombination was observed to be about 1.5 times that of males, and a statistically significant sex-specific recombination frequency was found for a single interval. The map is based on genotypic data gathered from 40 CEPH reference pedigrees and was constructed using the CRI-MAP program package. The map presented here represents a combined and substantially expanded dataset compared to previously published chromosome 7 maps, and it will serve as a "baseline" genetic map that should prove useful for future efforts to develop a 1-cM map and for construction of a contiguous clone-based physical map for this chromosome.     

利用两个测序水稻品种构建微卫星连锁图谱

利用已完成基因组测序的两个水稻品种日本晴和931l的数据库成功开发出水稻微卫星新标记,并利用由90个单株组成的日本晴×9311 F2作图群体,构建了一张包含152个SSR标记位点、覆盖基因组总长度2 455.7 cM的连锁图谱,有46个SSR新标记为自主开发,该图谱标记间的平均遗传距离为16.16 cM;并将未能在Temnykh等人(2001)构建的图谱上定位的微卫星标记RM345和RM494定位在第6染色体上.通过与Temnykh等人(2001)和兰涛等人(2003)所构建的图谱从作图群体的类型和大小、标记的类型和数量、标记在染色体上的线性排列顺序等几个方面进行比较,所绘制的图谱其标记在染色体线性排列上与Temnykh等人绘制的图谱具有很高的一致性,达93.81%.     

Use of flow-sorted canine chromosomes in the assignment of canine linkage, radiation hybrid, and syntenic groups to chromosomes: refinement and verification of the comparative chromosome map for dog and human

The mapping of the canine genome has recently been accelerated by the availability of chromosome-specific reagents and publication of radiation hybrid (RH), genetic linkage, and dog/human comparative maps, but the assignment of mapping groups to chromosomes is incomplete. To assign published radiation hybrid, linkage, and "syntenic" groups to chromosomes, individual markers found within each group have been amplified from canine and vulpine flow-sorted, chromosome-specific DNAs as templates. Here a further 102 type I genetic markers (previously mapped in human) and 21 further type II markers are assigned to canine chromosomes using marker-specific PCR. We have assigned all linkage, RH, and syntenic groups in the two most recently published canine genome maps to chromosomes. This demonstrates directly that there is at least one published mapping group for each of the 38 canine autosomes and thus that the coverage of the canine chromosome map is approaching completion. The dog/human comparative map is one of the most complex so far described, with 90 separate segments of chromosomal homology previously seen in dog-on-human cross-species chromosome-painting studies. The total of 142 type I markers now placed on canine chromosomes using this method of marker mapping has allowed us to confirm the placement of the great majority (83) of the 90 homologous segments. The positions of the remaining homologous segments were confirmed in new cross-species chromosome-painting experiments (dog-on-human, fox-on-human).     

A Primary Genetic Linkage Map of 14 Polymorphic Loci for the Short Arm of Human Chromosome 8

A genetic linkage map of markers for the short arm of human chromosome 8 has been constructed with 14 polymorphic DNA markers on the basis of genotypes obtained in 40 CEPH reference families. This unbroken map spans 45 cM in males and 79 cM in females. The 14 markers include three genes, MSR, LPL, and NEFL, and one anonymous DNA segment that were previously assigned to chromosome 8. The other 10 marker had been isolated from a chromosome 8-specific cosmid library and physically localized to chromosomal bands by fluorescence in situ hybridization. The order of loci determined by genetic linkage was consistent with their physical locations. This map will facilitate efficient linkage studies of human genetic diseases that may be segregating on chromosome 8p and will provide anchor points for development of high-resolution maps for this chromosomal region.     

Peaks of linkage are localized by a BAC/PAC contig of the 6p reading disability locus.

A gene for reading disability has been localized by nonparametric linkage to 6p21.3-p22 in several published reports. However, the lack of an uninterrupted genomic clone contig has made it difficult to determine accurate intermarker distances, precise marker order, and genetic boundaries and hinders direct comparisons of linkage. The search and discovery of the hemochromatosis gene (HFE) led to the creation of a bacterial artificial chromosome (BAC) and P-1 derived artificial chromosome (PAC) contig that extended physical maps 4 Mb from the MHC toward pter and localized new markers in that region [10-12]. Using this contig, we localized 124 sequence tagged sites, expressed sequence tags, and short tandem repeats including most of the markers in linkage with reading disability phenotypes, succinic semialdehyde dehydrogenase, GPLD1, prolactin, and 18 uncharacterized genes. This new contig joins and extends previously published physical maps to span the entire chromosome 6 reading disability genetic locus. Physical mapping data from the complete contig show overlap of the published linkage peaks for reading disability, provide accurate intermarker distances and order, and offer resources for generating additional markers and candidate genes for high resolution genetic studies in this region.     

Detection of tandem duplications and implications for linkage analysis.

The first demonstration of an autosomal dominant human disease caused by segmental trisomy came in 1991 for Charcot-Marie-Tooth disease type 1A (CMT1A). For this disorder, the segmental trisomy is due to a large tandem duplication of 1.5 Mb of DNA located on chromosome 17p11.2-p12. The search for the CMT1A disease gene was misdirected and impeded because some chromosome 17 genetic markers that are linked to CMT1A lie within this duplication. To better understand how such a duplication might affect genetic analyses in the context of disease gene mapping, we studied the effects of marker duplication on transmission probabilities of marker alleles, on linkage analysis of an autosomal dominant disease, and on tests of linkage homogeneity. We demonstrate that the undetected presence of a duplication distorts transmission ratios, hampers fine localization of the disease gene, and increases false evidence of linkage heterogeneity. In addition, we devised a likelihood-based method for detecting the presence of a tandemly duplicated marker when one is suspected. We tested our methods through computer simulations and on CMT1A pedigrees genotyped at several chromosome 17 markers. On the simulated data, our method detected 96% of duplicated markers (with a false-positive rate of 5%). On the CMT1A data our method successfully identified two of three loci that are duplicated (with no false positives). This method could be used to identify duplicated markers in other regions of the genome and could be used to delineate the extent of duplications similar to that involved in CMT1A.     

Integration of the Physical and Genetic Linkage Map for Human Chromosome 13

We have used a panel of somatic cell hybrids containing different rearrangements of human chromosome 13 to integrate genetic and physical maps of this chromosome. The positions of 17 translocation/deletion breakpoints on human chromosome 13 have been determined relative to the microsatellite markers on the genetic linkage map compiled by Généthon. Because markers on maps from several other Consortium groups have also been analyzed using many of the same hybrids, it was possible to relate these with the Généthon map. The position of all of the chromosome breakpoints have been placed, wherever possible, between two adjacent markers on the genetic linkage maps using PCR analysis for the presence/absence of the markers in the somatic cell hybrids. The positions of the breakpoints have already been determined cytogenetically, and some of these breakpoints are located at landmark positions on the chromosome. The relative density of markers along the chromosome differs between independently derived maps, and, based on the known locations of certain breakpoints in the physical map, inconsistencies in the genetic maps have been identified.     

An integrated map of Oryza sativa L. chromosome 5

The developments of molecular marker-based genetic linkage maps are now routine. Physical maps based on contigs of large insert genomic clones have been established in several plant species. However, integration of genetic, physical, and cytological maps is still a challenge for most plant species. Here we present an integrated map of rice (Oryza sativa L.) chromosome 5, developed by fluorescence in situ hybridization mapping of 18 bacterial artificial chromosome (BAC) clones or PI-derived artificial chromosome (PAC) clones on meiotic pachytene chromosomes. Each BAC/PAC clone was anchored by a restriction fragment length polymorphism marker mapped to the rice genetic linkage map. This molecular cytogenetic map shows the genetic recombination and sequence information of a physical map, correlated to the cytological features of rice chromosome 5. Detailed comparisons of the distances between markers on genetic, cytological, and physical maps, revealed the distributions of recombination events and molecular organization of the chromosomal features of rice chromosome 5 at the pachytene stage. Discordance of distances between the markers was found among the different maps. Our results revealed that neither the recombination events nor the degree of chromatin condensation were evenly distributed along the entire length of chromosome 5. Detailed comparisons of the correlative positions of markers on the genetic, cytological, and physical maps of rice chromosome 5 provide insight into the molecular architecture of rice chromosome 5, in relation to its cytological features and recombination events on the genetic map. The prospective applications of such an integrated cytogenetic map are discussed.     

Duplicate marker loci can result in incorrect locus orders on linkage maps

Genetic linkage maps, constructed from multi-locus recombination data, are the basis for many applications of molecular markers. For the successful employment of a linkage map, it is essential that the linear order of loci on a chromosome is correct. The objectives of this theoretical study were to (1) investigate the occurrence of incorrect locus orders caused by duplicate marker loci, (2) develop a statistical test for the detection of duplicate markers, and (3) discuss the implications for practical applications of linkage maps. We derived conditions, under which incorrect locus orders do or do not occur with duplicate marker loci for the general case of n markers on a chromosome in a BC₁ mapping population. We further illustrated these conditions numerically for the special case of four markers. On the basis of the extent of segregation distortion, an exact test for the presence of duplicate marker loci was suggested and its power was investigated numerically. Incorrect locus orders caused by duplicate marker loci can (1) negatively affect the assignment of target genes to chromosome regions in a map-based cloning experiment, (2) hinder indirect selection for a favorable allele at a quantitative trait locus, and (3) decrease the efficiency of reducing the length of the chromosome segment attached to a target gene in marker-assisted backcrossing.Communicated by G. WenzelM. Frisch and M. Quint contributed equally to this article.     

Transmission test for linkage disequilibrium: the insulin gene region and insulin-dependent diabetes mellitus (IDDM).

A population association has consistently been observed between insulin-dependent diabetes mellitus (IDDM) and the "class 1" alleles of the region of tandem-repeat DNA (5'' flanking polymorphism [5''FP]) adjacent to the insulin gene on chromosome 11p. This finding suggests that the insulin gene region contains a gene or genes contributing to IDDM susceptibility. However, several studies that have sought to show linkage with IDDM by testing for cosegregation in affected sib pairs have failed to find evidence for linkage. As means for identifying genes for complex diseases, both the association and the affected-sib-pairs approaches have limitations. It is well known that population association between a disease and a genetic marker can arise as an artifact of population structure, even in the absence of linkage. On the other hand, linkage studies with modest numbers of affected sib pairs may fail to detect linkage, especially if there is linkage heterogeneity. We consider an alternative method to test for linkage with a genetic marker when population association has been found. Using data from families with at least one affected child, we evaluate the transmission of the associated marker allele from a heterozygous parent to an affected offspring. This approach has been used by several investigators, but the statistical properties of the method as a test for linkage have not been investigated. In the present paper we describe the statistical basis for this "transmission test for linkage disequilibrium" (transmission/disequilibrium test [TDT]). We then show the relationship of this test to tests of cosegregation that are based on the proportion of haplotypes or genes identical by descent in affected sibs. The TDT provides strong evidence for linkage between the 5''FP and susceptibility to IDDM. The conclusions from this analysis apply in general to the study of disease associations, where genetic markers are usually closely linked to candidate genes. When a disease is found to be associated with such a marker, the TDT may detect linkage even when haplotype-sharing tests do not.     

A PCR-Based Genetic Map for Human Chromosome 3

Oligonucleotide primers for 125 simple sequence repeat microsatellite-based genetic markers have been assayed by polymerase chain reaction (PCR) in the CEPH reference family panel. These microsatellites include 101 dinucleotide repeats as well as 24 new tetranucleotide repeats. The average heterozygosity of this marker set was 72.4%. Genetic data were analyzed with the genetic mapping package LINKAGE. A subset of these microsatellite markers define a set of 56 uniquely ordered loci (>1000:1 against local inversion) that span 271 cM. Sixty-seven additional loci were tightly linked to markers on the uniquely ordered map, but could not be ordered with such high precision. These markers were positioned by CMAP into confidence intervals. One hundred thirteen of the microsatellite markers were also tested on a chromosome 3 framework somatic cell hybrid panel that divides this chromosome into 23 cytogenetically defined regions, integrating the genetic and physical maps of this chromosome. The high density, high heterozygosity, and PCR format of this genetically and physically mapped set of markers will accelerate the mapping and positional cloning of new chromosome 3 genes.