Improved M13 phage cloning vectors and host strains: nucleotide sequences of the M13mp18 and pUC19 vectors

Three kinds of improvements have been introduced into the M13-based cloning systems. (1) New Escherichia coli host strains have been constructed for the E. coli bacteriophage M13 and the high-copy-number pUC-plasmid cloning vectors. Mutations introduced into these strains improve cloning of unmodified DNA and of repetitive sequences. A new suppressorless strain facilitates the cloning of selected recombinants. (2) The complete nucleotide sequences of the M13mp and pUC vectors have been compiled from a number of sources, including the sequencing of selected segments. The M13mp18 sequence is revised to include the G-to-T substitution in its gene II at position 6 125 bp (in M13) or 6967 bp in M13mp18. (3) M13 clones suitable for sequencing have been obtained by a new method of generating unidirectional progressive deletions from the polycloning site using exonucleases HI and VII.     

A new pair of M13 vectors for selecting either DNA strand of double-digest restriction fragments

The strategy of shotgun cloning with M13 is based on obtaining random fragments used for the rapid accumulation of sequence data. A strategy, however, is sometimes needed for obtaining subcloned sequences preferentially out of a mixture of fragments. Shotgun sequencing experiments have shown that not all DNA fragments are obtained with the same frequency and that the redundant information increases during the last third of a sequencing project. In addition, experiments have shown that particular fragments are obtained more frequently in one orientation, allowing the use of only one of the two DNA strands as a template for M13 shotgun sequencing. Two new M13 vectors, M13mp8 and M13mp9, have been constructed that permit the cloning of the same restriction fragment in both possible orientations. Consequently, each of the two strands becomes a (+) strand in a pair of vectors. The fragments to be cloned are cleaved with two restriction enzymes to produce a fragment with two different ends. The insertion of such a fragment into the vector can occur only in one orientation. Since M13mp8 and M13mp9 have their array of cloning sites in an antiparallel order, either orientation for inserting a double-digest fragment can be selected by the choice of the vector.     

Experience in shotgun sequencing a 134 kilobase pair DNA molecule.

Until now, large DNA sequences have been obtained by cloning fragments of the target molecule into plasmid, cosmid or bacteriophage lambda vectors. The 134 kbp DNA sequence of channel catfish virus was determined with relative ease by shotgun cloning of random fragments of genomic DNA directly into a bacteriophage M13 vector, sequencing by dideoxynucleotide chain termination, and compilation of the data using Staden's database handling programs. Experience gained during this endeavour indicates that sequences substantially larger than 134 kbp may be obtained using this approach.     

A systemic DNA sequencing strategy

A systematic DNA sequencing strategy is presented. Instead of the sequencing of randomly selected DNA fragments (the “shotgun” method), the nucleotide order is progressively determined along a DNA chain using the dideoxynucleotide termination sequencing system and the single-stranded bacteriophage vector M13 derivatives. The length of DNA along which the sequence data can be progressively read appears to be limited only by the insertion capacity of the vector. As an example of this strategy a recombinant replicative form with a 2327 nucleotide long HindIII fragment from the restriction enzyme digest of bacteriophage λ DNA was prepared. The replicative form of the recombinant was partially digested with DNAase I in the presence of Mn²⁺. As the replication origin of the phage vector was located near one end of the inserted DNA and the priming site of the vector at the other, the breaks outside the inserted DNA either destroyed the phage or removed the priming site. With the use of a unique restriction site close to the priming site, the breaks within the inserted DNA gave rise to a recombinant mixture with the inserted DNA fixed at one end and sequentially shortened at the other. Using the ddT reaction screening procedure, 11 recombinants were identified in which the inserted DNA varied in length by about 200 nucleotides. Sequencing these recombinants by the dideoxynucleotide sequencing system covered the whole 2327 nucleotides of the HindIII DNA fragment. The average number of nucleotides read from a gel was 210, which fell into the most readable region of a sequencing gel: the overlapping regions between two gels were of 33 to 48 nucleotides.     

A simple system of cloning in phage M13 and DNA sequencing with terminators

A compilation of techniques for DNA cloning in filamentous phage M13 based vectors for a novice in cloning is presented. It does not require either specialized microbiological facilities, or any specific knowledge in Escherichia coli genetics. The cloning strategy uses only blunt-end ligation into a vector that has been prepared once for several hundred experiments. The first part describes the isolation, preparation and checking of a blunt-ended M13 vector (with M13 mp series vectors as an example), and also the isolation of clonable fragments, transformation of competent cells and preliminary analysis of recombinants. The second part describes procedures and equipment, which enable to sequence recombinant M13 clones by the chain termination procedure of Sanger et al. It includes simplified procedures for the preparation of sequencing gels, and the rules of interpretation of the sequencing ladders. Reference material is added, which includes trouble-shooting guide, E. coli K12 strain list and polylinker sequences for use of mp-series vectors as well as a fully documented cloning and sequencing experiment.     

New versatile cloning and sequencing vectors based on bacteriophage M13

A new pair of cloning and sequencing vectors based on bacteriophage M13mp7 has been developed. These vectors (M13tg130 and M13tg131) contain, in addition to the EcoRI, BamHI, HindIII, SmaI, SalI and PstI sites present in other vectors [cf., M13mp8 and M13mp9, Messing and Vieira, Gene 19 (1982) 269-276], unique restriction recognition sequences for the enzymes EcoRV, KpnI, SphI, SstI and XbaI. A restriction site for the enzyme BglII has been incorporated into the polylinker region of one of the vector pair to permit rapid discrimination between the two vectors.     

利用重组噬菌体诱导表达的大肠杆菌表达系统

将编码噬菌体T7RNA聚合酶的基因克隆至噬菌体M13mpl8RFDNA中,置于lac启动子的控制之下,得到了可表达T7 RNA聚合酶的重组噬菌体M13HEP。利用该噬菌体感染含T7启动子表达质粒的宿主菌以提供T7RNA聚合酶,可以诱导T7启动子控制下的外源基因的表达。该噬茵体诱导表达系统已成功地表达了多种外源基因,特别是一些表达产物对宿主菌有毒性的基因。同时,通过细菌接合将F',因子从大脑杆菌XL1-blue转至大肠杆菌HMS174,构建了新的大脑杆菌菌株HMSl74F,,使得T7表达质粒构建、表达及单链制备可以在同一菌株中完成,得到了一个完整的T7表达系统。     

EcoK selection vectors for shotgun cloning into M13 and deletion mutagenesis.

For shotgun cloning into M13 vectors, a double-stranded cassette of synthetic oligonucleotides containing a SmaI site within the two halves of an EcoK site, has been introduced into the vector M13mp8. Cloning of blunt end DNA into the SmaI site destroys the EcoK site, and recombinants are therefore preferentially selected on transfection into a K strain of E.coli. For deletion mutagenesis using synthetic oligonucleotides, an M13 vector with four copies of the EcoK cassette has been made to facilitate the joining of lacZ or a Factor Xa cleavage site to any protein reading frame.     

The complete nucleotide sequence of an infectious clone of cauliflower mosaic virus by M13mp7 shotgun sequencing.

We have determined the complete primary structure (8031 base pairs) of an infectious clone of cauliflower mosaic virus strain CM1841. The sequence was obtained using the strategy of cloning shotgun restriction fragments in the sequencing vector M13mp7. Comparison of the CM1841 sequence with that published for another caMV strain (Strasbourg) reveals 4.4% changes, mostly nucleotide substitutions with a few small insertions and deletions. The six open reading frames in the sequence of the Strasbourg isolate are also present in CM1841.     

利用T载体克隆快速构建布鲁氏菌缺失突变株

目的：建立一种基于T载体快速克隆构建布鲁氏菌突变株的方法,提高布鲁氏菌突变株构建的效率;方法：采用融合PCR的方法,将待缺失基因上下游的同源臂与卡那霉素抗性基因融合起来,构建突变盒,然后将突变盒直接与T载体连接,构建突变载体,将载体转入布鲁氏菌感受态细胞并筛选抗性克隆,进而获得布鲁氏菌的缺失突变株。结果：结合融合PCR和T载体快速克隆,能够在48h之内构建好突变载体,与传统的酶切连接相比,效率高、周期短。结论：基于T载体快速克隆是一种非常高效的构建突变株的方法,为布鲁氏菌突变株的构建提供了一种新方法。     

Isolation of vaccinia MVA recombinants using the viral F13L gene as the selective marker

Modified vaccinia Ankara (MVA) is a highly attenuated vaccine vector that has an excellent vaccine safety record. Also, as a eukaryotic gene expression vector, MVA can be used in a biosafety level 1 setup, in contrast to more virulent vaccinia virus strains. Isolation of recombinant MVA involves repeated plaquing of the virus and is burdensome because virus plaques are slow to develop and difficult to recognize. To facilitate the generation of MVA recombinants, we have developed a cloning system for MVA based on the selection of the viral F13L gene. Deletion of F13L in MVA produced a small plaque phenotype and a reduction in extracellular virus formation, indicating a severe block in cell-to-cell spread. When using the F13L knockout virus as the parental virus, reintroduction of the F13L gene in the original locus was used as an efficient selection for the isolation of virus recombinants. The selection procedure can be done entirely in the permissive baby hamster kidney (BHK)-21 cell line, does not require plaque isolation, and rendered close to 100% recombinant virus.     

Phasmid vectors for identification of genes by complementation of Escherichia coli mutants.

A bacteriophage lambda cloning vector was designed to facilitate the isolation of genes from procaryotic organisms by complementation of Escherichia coli mutants. This vector, lambda SE4, was constructed by attaching a very-low-copy-number replication system (from the plasmid NR1) and a spectinomycin resistance gene to the left arm of lambda 1059 (Karn et al., Proc. Natl. Acad. Sci. U.S.A. 77:5172-5176, 1980). This phasmid cloning vector is capable of growing lytically as a phage in a nonimmune host or lysogenically as a phasmid in an immune host. This phasmid utilizes the Spi- selection for insertions of DNA into the vector and has the ability to accept 2- to 19-kilobase Sau3A1, BamHI, BglII, BclI, or XhoII fragments; recombinants lysogenize immune hosts as single-copy-number selectable plasmids at 100% frequency. An E. coli library was constructed by using the initial vector lambda SE4, and clones of a number of representative genes were identified. A typical clone, lambda ant+, was shown to be readily mutagenized by a mini-Tn10 transposon. A general method for transferring cloned DNA segments onto bacteriophage lambda was developed. The method involves the use of in vivo recombination with a selection and was used to construct two derivatives of lambda SE4. Possible uses of these vectors and of the method for transferring cloned DNA onto phage lambda are discussed.     

A Streamlined Random Sequencing Strategy for Finding Coding Exons

The random (shotgun) DNA sequencing strategy is used for most large-scale sequencing projects, including the identification of human disease genes after positional cloning. The principle of the method--sequence assembly from overlap--requires the candidate gene region to be partitioned into 15- to 20-kb pieces (usually λ inserts), themselves randomly subcloned into M13 prior to sequencing with a 6- to 8-fold redundancy. Most often, a time-consuming directed strategy must be invoked to close the remaining gaps. Ultimately, computer-based methods are invoked to locate putative coding exons within the finished genomic sequence. Given the small average size of vertebrate exons, I show here that they can be detected from the computer analysis of the individual runs, much before completion of contiguity. However, the successful assessment of coding potential from the raw data depends on a combination of new sequence masking techniques. When the identification of coding exons is the primary goal, the usual random sequencing strategy can thus be greatly optimized. The streamlined approach requires only a 2- to 2.5-fold sequencing redundancy, can dispense with the subcloning in λ and the closure of gaps, and can be fully automated. The feasibility of this strategy is demonstrated using data from the X-linked Kallmann syndrome gene region.     

Sequence analysis of HLA class II domains: characterization of the DQw3 family of DQB genes

HLA class II allelic variants within the DQw3-related family of genes carry distinct allo-specificities and have been implicated in specific HLA-disease associations, such as insulin-dependent diabetes mellitus. To investigate the nucleotide variations which characterize DQw3 genes, we applied a novel cDNA cloning strategy that uses a single-stranded vector/primer system to facilitate DNA sequencing of allelically variable gene families. Using a DQB-specific primer sequence and M13 bacteriophage as the cloning vector, direct cloning and sequencing of multiple DQB genes was performed without the need for second strand synthesis or for subcloning. Sequence analysis from eight lymphoblastoid cell lines selected to represent different ethnic backgrounds revealed three DQw3-related DQB genes, DQB3.1, 3.2, and 3.3, corresponding to the newly designated HLA-DQw7, w8, and w9 specificities, respectively. An unusual Pro-Pro couplet at codons 55–56 is characteristic of all DQw3-positive sequences and may be contributing to the broad DQw3 allospecificity. Comparisons among ethnically disparate DQw3-related sequences showed no additional expressed or silent nucleotide substitutions among these DQB alleles. Thus, polymorphism within the DQw3 family of genes appears to be extremely limited, with a paucity of nucleotide variations accumulated by evolutionary distance.     

Rapid shotgun cloning utilizing the two base recognition endonuclease CviJI.

A new approach has been developed for the rapid fragmentation and fractionation of DNA into a size suitable for shotgun cloning and sequencing. The restriction endonuclease CviJI normally cleaves the recognition sequence PuGCPy between the G and C to leave blunt ends. Atypical reaction conditions which alter the specificity of this enzyme (CviJI**) yield a quasi-random distribution of DNA fragments from the small molecule pUC19 (2686 base pairs). To quantitatively evaluate the randomness of this fragmentation strategy, a CviJI** digest of pUC19 was size fractionated by a rapid gel filtration method and directly ligated, without end repair, to a lacZ minus M13 cloning vector. Sequence analysis of 76 clones showed that CviJI** restricts PyGCPy and PuGCPu, in addition to PuGCPy sites, and that new sequence data is accumulated at a rate consistent with random fragmentation. Advantages of this approach compared to sonication and agarose gel fractionation include: smaller amounts of DNA are required (0.2-0.5 micrograms instead of 2-5 micrograms), fewer steps are involved (no preligation, end repair, chemical extraction, or agarose gel electrophoresis and elution are needed), and higher cloning efficiencies are obtained (CviJI** digested and column fractionated DNA transforms 3-16 times more efficiently than sonicated, end-repaired, and agarose fractionated DNA).     

A modified T-vector for simplified assembly of hairpin RNAi constructs

We describe a modified T-vector, pGFPm-T, for direct cloning of RT-PCR products to generate bidirectional restriction fragments for assembly of hairpin-containing RNAi vectors in the popular pFGC and pGSA binary vector backbone. Green fluorescence protein (GFP) is used as a visual reporter for direct selection of recombinants under UV illumination. The simplified cloning process enables a seamless workflow from candidate gene selection and RT-PCR verification to inverted repeat cloning, using a single pair of gene-specific primers.