Mapping of quantitative trait loci controlling timing of bud flush in Salix

Dormancy release is an important phenological stage, which determines plant growth and survival in northern temperate regions. Spring bud flushing was studied in a Salix pedigree (n=82) derived from a cross between the male hybrid clone "Bj?rn" (Salix viminalis x Salix schwerinii) and the female clone "78183" (Salix viminalis). The timing of bud flush was recorded outdoors in two consecutive years (1998, 1999) and indoor in the spring of 1998. Timing of bud flush was found to be under moderately strong genetic control (clonal mean heritabilities ranging from 0.43 to 0.72). Phenotypic correlations between height growth and bud flushing were negative but non-significant (r=0.1-0.3). Using a Salix linkage map composed of 325 AFLP and 38 RFLP markers, six quantitative trait loci (QTLs) and three unmapped marker loci associated with timing of bud flush were detected. Four QTLs were detected in the field experiment while two QTLs and three unmapped marker loci were identified in the indoor experiment. One QTL associated with indoor bud flushing coincided with one of the QTL detected from the field data. Individual QTL explained 6-16% of the phenotypic variance [corrected]. None of the bud flush QTLs coincided with QTLs controlling height growth identified previously in the same pedigree.     

Regulation of Arabidopsis defense responses against Spodoptera littoralis by CPK-mediated calcium signaling

Background

Genetic markers and linkage mapping are basic prerequisites for marker-assisted selection and map-based cloning. In the case of the key grassland species Lolium spp., numerous mapping populations have been developed and characterised for various traits. Although some genetic linkage maps of these populations have been aligned with each other using publicly available DNA markers, the number of common markers among genetic maps is still low, limiting the ability to compare candidate gene and QTL locations across germplasm.

Results

A set of 204 expressed sequence tag (EST)-derived simple sequence repeat (SSR) markers has been assigned to map positions using eight different ryegrass mapping populations. Marker properties of a subset of 64 EST-SSRs were assessed in six to eight individuals of each mapping population and revealed 83% of the markers to be polymorphic in at least one population and an average number of alleles of 4.88. EST-SSR markers polymorphic in multiple populations served as anchor markers and allowed the construction of the first comprehensive consensus map for ryegrass. The integrated map was complemented with 97 SSRs from previously published linkage maps and finally contained 284 EST-derived and genomic SSR markers. The total map length was 742 centiMorgan (cM), ranging for individual chromosomes from 70 cM of linkage group (LG) 6 to 171 cM of LG 2.

Conclusions

The consensus linkage map for ryegrass based on eight mapping populations and constructed using a large set of publicly available Lolium EST-SSRs mapped for the first time together with previously mapped SSR markers will allow for consolidating existing mapping and QTL information in ryegrass. Map and markers presented here will prove to be an asset in the development for both molecular breeding of ryegrass as well as comparative genetics and genomics within grass species.     

Editor's choice: High-Resolution Linkage and Quantitative Trait Locus Mapping Aided by Genome Survey Sequencing: Building Up An Integrative Genomic Framework for a Bivalve Mollusc

Genetic linkage maps are indispensable tools in genetic and genomic studies. Recent development of genotyping-by-sequencing (GBS) methods holds great promise for constructing high-resolution linkage maps in organisms lacking extensive genomic resources. In the present study, linkage mapping was conducted for a bivalve mollusc (Chlamys farreri) using a newly developed GBS method—2b-restriction site-associated DNA (2b-RAD). Genome survey sequencing was performed to generate a preliminary reference genome that was utilized to facilitate linkage and quantitative trait locus (QTL) mapping in C. farreri. A high-resolution linkage map was constructed with a marker density (3806) that has, to our knowledge, never been achieved in any other molluscs. The linkage map covered nearly the whole genome (99.5%) with a resolution of 0.41 cM. QTL mapping and association analysis congruously revealed two growth-related QTLs and one potential sex-determination region. An important candidate QTL gene named PROP1, which functions in the regulation of growth hormone production in vertebrates, was identified from the growth-related QTL region detected on the linkage group LG3. We demonstrate that this linkage map can serve as an important platform for improving genome assembly and unifying multiple genomic resources. Our study, therefore, exemplifies how to build up an integrative genomic framework in a non-model organism.     

Comparative QTL analysis of early short-time drought tolerance in Polish fodder and malting spring barleys

Key message

An effective approach for the further evolution of QTL markers, may be to create mapping populations for locally adapted gene pools, and to phenotype the studied trait under local conditions.

Abstract

Mapping populations of Polish fodder and malting spring barleys (Hordeum vulgare L.) were used to analyze traits describing short-time drought response at the seedlings stage. High-throughput genotyping (Diversity Array Technology (DArT) markers) and phenotyping techniques were used. The results showed high genetic diversity of the studied populations which allowed the creation of high-density linkage maps. There was also high diversity in the physiological responses of the barleys. Quantitative trait locus (QTL) analysis revealed 18 QTLs for nine physiological traits on all chromosomes except 1H in malting barley and 15 QTLs for five physiological traits on chromosomes 2H, 4H, 5H and 6H in fodder barley. Chromosomes 4H and 5H contained QTLs which explained most of the observed phenotypic variations in both populations. There was a major QTL for net photosynthetic rate in the malting barley located on chromosome 5H and two major QTLs for overall photochemical performance (PI) located on 5H and 7H. One major QTL related to photochemical quenching of chlorophyll fluorescence was located on chromosome 4H in fodder barley. Three QTL regions were common to both mapping populations but the corresponding regions explained different drought-induced traits. One region was for QTLs related to PSII photosynthetic activity stress index in malting barley, and the corresponding region in fodder barley was related to the water content stress index. These results are in accordance with previous studies which showed that different traits were responsible for drought tolerance variations in fodder and malting barleys.     

Quantitative trait loci and candidate gene mapping of bud set and bud flush in populus

The genetic control of bud phenology in hybrid poplar was studied by mapping quantitative trait loci (QTL) affecting the timing of autumn bud set and spring bud flush. The founders of the mapping pedigree were collected from widely separated latitudes to maximize segregating variation for dormancy-related traits in the F(2) generation-the female Populus trichocarpa parent is from Washington State (48 degrees N) and the male P. deltoides parent is from Texas (31 degrees N). Bud set and bud flush timing were measured on the F(2) generation in a replicated clonal field trial. Using a linkage map constructed of AFLP and microsatellite markers, three QTL controlling bud set and six QTL controlling bud flush were detected. Additionally, five candidate genes believed to be involved in perception of photoperiod (PHYB1, PHYB2) or transduction of abscisic acid response signals (ABI1B, ABI1D, and ABI3) were placed on the QTL map. PHYB2 and ABI1B were found to be coincident with QTL affecting bud set and bud flush.     

Clusthaplo: a plug-in for MCQTL to enhance QTL detection using ancestral alleles in multi-cross design

Key message

We enhance power and accuracy of QTL mapping in multiple related families, by clustering the founders of the families on their local genomic similarity.

Abstract

MCQTL is a linkage mapping software application that allows the joint QTL mapping of multiple related families. In its current implementation, QTLs are modeled with one or two parameters for each parent that is a founder of the multi-cross design. The higher the number of parents, the higher the number of model parameters which can impact the power and the accuracy of the mapping. We propose to make use of the availability of denser and denser genotyping information on the founders to lessen the number of MCQTL parameters and thus boost the QTL discovery. We developed clusthaplo, an R package (http://cran.r-project.org/web/packages/clusthaplo/index.html), which aims to cluster haplotypes using a genomic similarity that reflects the probability of sharing the same ancestral allele. Computed in a sliding window along the genome and followed by a clustering method, the genomic similarity allows the local clustering of the parent haplotypes. Our assumption is that the haplotypes belonging to the same class transmit the same ancestral allele. So their putative QTL allelic effects can be modeled with the same parameter, leading to a parsimonious model, that is plugged in MCQTL. Intensive simulations using three maize data sets showed the significant gain in power and in accuracy of the QTL mapping with the ancestral allele model compared to the classical MCQTL model. MCQTL_LD (clusthaplo outputs plug in MCQTL) is a versatile and powerful tool for QTL mapping in multiple related families that makes use of linkage and linkage disequilibrium (web site http://carlit.toulouse.inra.fr/MCQTL/).     

Linear models for joint association and linkage QTL mapping

Background

Populational linkage disequilibrium and within-family linkage are commonly used for QTL mapping and marker assisted selection. The combination of both results in more robust and accurate locations of the QTL, but models proposed so far have been either single marker, complex in practice or well fit to a particular family structure.

Results

We herein present linear model theory to come up with additive effects of the QTL alleles in any member of a general pedigree, conditional to observed markers and pedigree, accounting for possible linkage disequilibrium among QTLs and markers. The model is based on association analysis in the founders; further, the additive effect of the QTLs transmitted to the descendants is a weighted (by the probabilities of transmission) average of the substitution effects of founders'' haplotypes. The model allows for non-complete linkage disequilibrium QTL-markers in the founders. Two submodels are presented: a simple and easy to implement Haley-Knott type regression for half-sib families, and a general mixed (variance component) model for general pedigrees. The model can use information from all markers. The performance of the regression method is compared by simulation with a more complex IBD method by Meuwissen and Goddard. Numerical examples are provided.

Conclusion

The linear model theory provides a useful framework for QTL mapping with dense marker maps. Results show similar accuracies but a bias of the IBD method towards the center of the region. Computations for the linear regression model are extremely simple, in contrast with IBD methods. Extensions of the model to genomic selection and multi-QTL mapping are straightforward.     

Multiple-line cross QTL mapping for biomass yield and plant height in triticale (× Triticosecale Wittmack)

Key message

QTL mapping in multiple families identifies trait-specific and pleiotropic QTL for biomass yield and plant height in triticale.

Abstract

Triticale shows a broad genetic variation for biomass yield which is of interest for a range of purposes, including bioenergy. Plant height is a major contributor to biomass yield and in this study, we investigated the genetic architecture underlying biomass yield and plant height by multiple-line cross QTL mapping. We employed 647 doubled haploid lines from four mapping populations that have been evaluated in four environments and genotyped with 1710 DArT markers. Twelve QTL were identified for plant height and nine for biomass yield which cross-validated explained 59.6 and 38.2 % of the genotypic variance, respectively. A major QTL for both traits was identified on chromosome 5R which likely corresponds to the dominant dwarfing gene Ddw1. In addition, we detected epistatic QTL for plant height and biomass yield which, however, contributed only little to the genetic architecture of the traits. In conclusion, our results demonstrate the potential of genomic approaches for a knowledge-based improvement of biomass yield in triticale.     

Development of F1 hybrid population and the high-density linkage map for European aspen (<Emphasis Type="Italic">Populus tremula</Emphasis> L.) using RADseq technology

Background

Restriction-site associated DNA sequencing (RADseq) technology was recently employed to identify a large number of single nucleotide polymorphisms (SNP) for linkage mapping of a North American and Eastern Asian Populus species. However, there is also the need for high-density genetic linkage maps for the European aspen (P. tremula) as a tool for further mapping of quantitative trait loci (QTLs) and marker-assisted selection of the Populus species native to Europe.

Results

We established a hybrid F1 population from the cross of two aspen parental genotypes diverged in their phenological and morphological traits. We performed RADseq of 122 F1 progenies and two parents yielding 15,732 high-quality SNPs that were successfully identified using the reference genome of P. trichocarpa. 2055 SNPs were employed for the construction of maternal and paternal linkage maps. The maternal linkage map was assembled with 1000 SNPs, containing 19 linkage groups and spanning 3054.9 cM of the genome, with an average distance of 3.05 cM between adjacent markers. The paternal map consisted of 1055 SNPs and the same number of linkage groups with a total length of 3090.56 cM and average interval distance of 2.93 cM. The linkage maps were employed for QTL mapping of one-year-old seedlings height variation. The most significant QTL (LOD = 5.73) was localized to LG5 (96.94 cM) of the male linkage map, explaining 18% of the phenotypic variation.

Conclusions

The set of 15,732 SNPs polymorphic in aspen and high-density genetic linkage maps constructed for the P. tremula intra-specific cross will provide a valuable source for QTL mapping and identification of candidate genes facilitating marker-assisted selection in European aspen.

     

An AFLP and RFLP linkage map and quantitative trait locus (QTL) analysis of growth traits in Salix

A genetic linkage map of Salix (2n = 38), composed of 325 AFLP and 38 RFLP markers has been constructed. The map was based on a population ( n = 87) derived from a cross between the male hybrid clone "Bj?rn" ( Salix viminalis x Salix schwerinii) and the female clone "78183" ( S. viminalis). Three hundred fifty seven AFLPs corresponding to DNA polymorphisms heterozygous in one parent and null in the other were scored. A total of 87 RFLP probes, most (83) derived from the Populus genome, yielded 39 and 11 polymorphic loci segregating in a 1:1 and 1:2:1 ratio respectively. Two maps, one for each parent, were constructed according to the "two-way pseudo-testcross" mapping strategy. The S. viminalis x S. schwerinii map (2,404 cM) included 217 markers and formed 26 major linkage groups while S. viminalis (1,844 cM) consisted of 146 markers placed on 18 major groups. In addition, eight and 14 additional minor linkage groups composed of less than four markers (doubles and triplets) were obtained in the S. viminalis x S. schwerinii and the S. viminalis maps, respectively. Both maps provided 70-80% genome coverage with an average density of markers of 14 cM. To investigate possible homologies between the parental maps, 20 AFLPs and 11 RFLPs segregating in 3:1 or 1:2:1 ratios were included in the linkage analysis. Eight linkage groups homologous between the two maps were detected. The present genetic map was used to identify quantitative trait loci (QTLs) affecting growth-related traits. Eleven QTLs were identified; seven QTLs for height growth, one QTL for stem diameter, one QTL for the height: diameter ratio, one QTL for the number of vegetative buds during flowering time and one QTL for the number of shoots. The estimated magnitude of the QTL effect ranged from 14 to 22% of the total phenotypic variance. One QTL associated with height growth and one affecting the height: diameter ratio were overlapping in the same marker interval with the QTL affecting stem diameter. QTL stability over years was estimated for traits measured in multiple years. Generally, QTLs were only significant in a single year although two QTLs for height growth were close to reaching the significance level in 2 consecutive years.     

水产养殖动物遗传连锁图谱及QTL定位研究进展

自1997年美国农业部启动5种水产养殖动物基因组计划以来,在不到10年的时间里,世界各国都相继开展了本国主要水产养殖动物基因组研究。截至2005年底,有近17种海淡水养殖动物公布了遗传连锁图谱：属于高密度连锁图谱的有虹鳟和大西洋鲑（标记数超过1000）;属于中密度遗传连锁图谱的有罗非鱼、沟鲶、黑虎虾、日本牙鲆和欧洲海鲈（标记数为400-1000）;属于低密度遗传连锁图谱的有泰国的胡鲶,中国的栉孔扇贝、鲤鱼,日本的黄尾鲕,美国的牡蛎等近10种养殖种类（标记数少于400）。水产养殖动物遗传连锁图谱的构建和发展,促进了一些与经济性状（如生长、抗逆、发育等）相关的数量性状位点（QTL）的定位研究。然而,QTL定位研究目前只在具有中高密度遗传连锁图谱的鲑科鱼类（虹鳟、大西洋鲑和北极嘉鱼）、罗非鱼、沟鲶和日本牙鲆等种类中开展,而且定位研究仍处在初级水平。遗传连锁图谱的高分辨率和QTL在图谱上的精确定位,是今后能否实现对主要水产养殖动物的经济性状进行遗传操作的技术保证,同时也是实现分子标记或基因辅助育种在水产养殖动物中成功运用的制胜法宝。     

A microsatellite-based consensus linkage map for species of Eucalyptus and a novel set of 230 microsatellite markers for the genus

Background  

Eucalypts are the most widely planted hardwood trees in the world occupying globally more than 18 million hectares as an important source of carbon neutral renewable energy and raw material for pulp, paper and solid wood. Quantitative Trait Loci (QTLs) in Eucalyptus have been localized on pedigree-specific RAPD or AFLP maps seriously limiting the value of such QTL mapping efforts for molecular breeding. The availability of a genus-wide genetic map with transferable microsatellite markers has become a must for the effective advancement of genomic undertakings. This report describes the development of a novel set of 230 EMBRA microsatellites, the construction of the first comprehensive microsatellite-based consensus linkage map for Eucalyptus and the consolidation of existing linkage information for other microsatellites and candidate genes mapped in other species of the genus.     

Composition and functional analysis of low-molecular-weight glutenin alleles with Aroona near-isogenic lines of bread wheat

Background

The polyphenolic products of the phenylpropanoid pathway, including proanthocyanidins, anthocyanins and flavonols, possess antioxidant properties that may provide health benefits. To investigate the genetic architecture of control of their biosynthesis in apple fruit, various polyphenolic compounds were quantified in progeny from a 'Royal Gala' × 'Braeburn' apple population segregating for antioxidant content, using ultra high performance liquid chromatography of extracts derived from fruit cortex and skin.

Results

Construction of genetic maps for 'Royal Gala' and 'Braeburn' enabled detection of 79 quantitative trait loci (QTL) for content of 17 fruit polyphenolic compounds. Seven QTL clusters were stable across two years of harvest and included QTLs for content of flavanols, flavonols, anthocyanins and hydroxycinnamic acids. Alignment of the parental genetic maps with the apple whole genome sequence in silico enabled screening for co-segregation with the QTLs of a range of candidate genes coding for enzymes in the polyphenolic biosynthetic pathway. This co-location was confirmed by genetic mapping of markers derived from the gene sequences. Leucoanthocyanidin reductase (LAR1) co-located with a QTL cluster for the fruit flavanols catechin, epicatechin, procyanidin dimer and five unknown procyanidin oligomers identified near the top of linkage group (LG) 16, while hydroxy cinnamate/quinate transferase (HCT/HQT) co-located with a QTL for chlorogenic acid concentration mapping near the bottom of LG 17.

Conclusion

We conclude that LAR1 and HCT/HQT are likely to influence the concentration of these compounds in apple fruit and provide useful allele-specific markers for marker assisted selection of trees bearing fruit with healthy attributes.     

Quantitative trait loci of stripe rust resistance in wheat

Key message

Over 140 QTLs for resistance to stripe rust in wheat have been published and through mapping flanking markers on consensus maps, 49 chromosomal regions are identified.

Abstract

Over thirty publications during the last 10 years have identified more than 140 QTLs for stripe rust resistance in wheat. It is likely that many of these QTLs are identical genes that have been spread through plant breeding into diverse backgrounds through phenotypic selection under stripe rust epidemics. Allelism testing can be used to differentiate genes in similar locations but in different genetic backgrounds; however, this is problematic for QTL studies where multiple loci segregate from any one parent. This review utilizes consensus maps to illustrate important genomic regions that have had effects against stripe rust in wheat, and although this methodology cannot distinguish alleles from closely linked genes, it does highlight the extent of genetic diversity for this trait and identifies the most valuable loci and the parents possessing them for utilization in breeding programs. With the advent of cheaper, high throughput genotyping technologies, it is envisioned that there will be many more publications in the near future describing ever more QTLs. This review sets the scene for the coming influx of data and will quickly enable researchers to identify new loci in their given populations.     

Mapping of quantitative trait loci controlling adaptive traits in coastal Douglas-fir. I. Timing of vegetative bud flush

Thirty three unique quantitative trait loci (QTLs) affecting the timing of spring bud flush have been identified in an intraspecific mapping population of coastal Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco var. menziesii]. Both terminal and lateral bud flush were measured over a 4-year period on clonal replicates at two test sites, allowing for the repeated estimation of QTLs. QTLs were detected on 12 linkage groups and, in general, each explained a small proportion of the total phenotypic variance and were additive in effect. Several QTLs influence the timing of bud flush over multiple years, supporting earlier evidence that the timing of bud flush through developmental stages is under moderate to strong genetic control by the same suite of genes through developmental stages. However, only a few QTLs controlling the timing of bud flush were detected at both test sites, suggesting that geographic location plays a major role in the phenology of spring growth. A small number of QTLs with year and site interactions were also estimated. Received: 20 July 2000 / Accepted: 19 October 2000     

Genetic mapping of local adaptation along the altitudinal gradient in <Emphasis Type="Italic">Abies sachalinensis</Emphasis>

Understanding the genetic bases of local adaptation in dominant conifer species is critical in predicting the impacts of rapid climate change on forest ecosystems. However, the genetic basis of adaptation is not yet fully understood due to the huge and complex genomes of conifers and the unavailability to date of suitable crossing material. In this study, we constructed a linkage map for Abies sachalinensis (2n = 24) and investigated quantitative trait loci (QTLs) associated with local adaptation along an altitudinal gradient. A segregating population of 239 seedlings was produced from a cross between two F₁ hybrids (high-altitude × low-altitude genotypes). QTL mapping of phenological and growth traits was performed using a pseudo-testcross strategy with linkage maps based on 1251 single-nucleotide polymorphism (SNP) and three simple sequence repeat (SSR) markers. Two maps consisting of 12 linkage groups with an average marker interval of ca. 3 cM were constructed for each parent. The total lengths of the maps were 1861 and 1949 cM. A permutation test identified four significant QTLs and 11 additional suggestive QTLs, with high logarithm of odds (LOD) scores (> 3.0). This is the first highly saturated linkage map produced for Abies taxa. Our results suggest that spring bud phenology is controlled by several QTLs with moderate effects. The use of the mapping population created by crossing two hybrids (high × low altitude genotypes) and numerous SNP markers enabled us to investigate the genetic basis of adaptive traits in conifer species.     

QTL mapping in autotetraploids using SNP dosage information

Key message

Dense linkage maps derived by analysing SNP dosage in autotetraploids provide detailed information about the location of, and genetic model at, quantitative trait loci.

Abstract

Recent developments in sequencing and genotyping technologies enable researchers to generate high-density single nucleotide polymorphism (SNP) genotype data for mapping studies. For polyploid species, the SNP genotypes are informative about allele dosage, and Hackett et al. (PLoS ONE 8:e63939, 2013) presented theory about how dosage information can be used in linkage map construction and quantitative trait locus (QTL) mapping for an F₁ population in an autotetraploid species. Here, QTL mapping using dosage information is explored for simulated phenotypic traits of moderate heritability and possibly non-additive effects. Different mapping strategies are compared, looking at additive and more complicated models, and model fitting as a single step or by iteratively re-weighted modelling. We recommend fitting an additive model without iterative re-weighting, and then exploring non-additive models for the genotype means estimated at the most likely position. We apply this strategy to re-analyse traits of high heritability from a potato population of 190 F₁ individuals: flower colour, maturity, height and resistance to late blight (Phytophthora infestans (Mont.) de Bary) and potato cyst nematode (Globodera pallida), using a map of 3839 SNPs. The approximate confidence intervals for QTL locations have been improved by the detailed linkage map, and more information about the genetic model at each QTL has been revealed. For several of the reported QTLs, candidate SNPs can be identified, and used to propose candidate trait genes. We conclude that the high marker density is informative about the genetic model at loci of large effects, but that larger populations are needed to detect smaller QTLs.     

Mapping and validation of quantitative trait loci associated with concentrations of 16 elements in unmilled rice grain

Key Message

QTLs controlling the concentrations elements in rice grain were identified in two mapping populations. The QTLs were clustered such that most genomic regions were associated with more than one element.

Abstract

In this study, quantitative trait loci (QTLs) affecting the concentrations of 16 elements in whole, unmilled rice (Oryza sativa L.) grain were identified. Two rice mapping populations, the ‘Lemont’ × ‘TeQing’ recombinant inbred lines (LT-RILs), and the TeQing-into-Lemont backcross introgression lines (TILs) were used. To increase opportunity to detect and characterize QTLs, the TILs were grown under two contrasting field conditions, flooded and irrigated-but-unflooded. Correlations between the individual elements and between each element with grain shape, plant height, and time of heading were also studied. Transgressive segregation was observed among the LT-RILs for all elements. The 134 QTLs identified as associated with the grain concentrations of individual elements were found clustered into 39 genomic regions, 34 of which were found associated with grain element concentration in more than one population and/or flooding treatment. More QTLs were found significant among flooded TILs (92) than among unflooded TILs (47) or among flooded LT-RILs (40). Twenty-seven of the 40 QTLs identified among the LT-RILs were associated with the same element among the TILs. At least one QTL per element was validated in two or more population/environments. Nearly all of the grain element loci were linked to QTLs affecting additional elements, supporting the concept of element networks within plants. Several of the grain element QTLs co-located with QTLs for grain shape, plant height, and days to heading; but did not always differ for grain elemental concentration as predicted by those traits alone. A number of interesting patterns were found, including a strong Mg–P–K complex.     

Functional mapping imprinted quantitative trait loci underlying developmental characteristics

Background

Genomic imprinting, a phenomenon referring to nonequivalent expression of alleles depending on their parental origins, has been widely observed in nature. It has been shown recently that the epigenetic modification of an imprinted gene can be detected through a genetic mapping approach. Such an approach is developed based on traditional quantitative trait loci (QTL) mapping focusing on single trait analysis. Recent studies have shown that most imprinted genes in mammals play an important role in controlling embryonic growth and post-natal development. For a developmental character such as growth, current approach is less efficient in dissecting the dynamic genetic effect of imprinted genes during individual ontology.

Results

Functional mapping has been emerging as a powerful framework for mapping quantitative trait loci underlying complex traits showing developmental characteristics. To understand the genetic architecture of dynamic imprinted traits, we propose a mapping strategy by integrating the functional mapping approach with genomic imprinting. We demonstrate the approach through mapping imprinted QTL controlling growth trajectories in an inbred F₂ population. The statistical behavior of the approach is shown through simulation studies, in which the parameters can be estimated with reasonable precision under different simulation scenarios. The utility of the approach is illustrated through real data analysis in an F₂ family derived from LG/J and SM/J mouse stains. Three maternally imprinted QTLs are identified as regulating the growth trajectory of mouse body weight.

Conclusion

The functional iQTL mapping approach developed here provides a quantitative and testable framework for assessing the interplay between imprinted genes and a developmental process, and will have important implications for elucidating the genetic architecture of imprinted traits.     

Genetic analysis of the components of winterhardiness in barley (Hordeum vulgare L.)

Winterhardiness in cereals is the consequence of a number of complex and interacting component characters: cold tolerance, vernalization requirement, and photoperiod sensitivity. An understanding of the genetic basis of these component traits should allow for more-effective selection. Genome map-based analyses hold considerable promise for dissecting complex phenotypes. A 74-point linkage map was developed from 100 doubled haploid lines derived from a winter x spring barley cross and used as the basis for quantitative trait locus (QTL) analyses to determine the chromosome location of genes controlling components of winterhardiness. Despite the greater genome coverage provided by the current map, a previously-reported interval on chromosome 7 remains the only region where significant QTL effects for winter survival were detected in this population. QTLs for growth habit and heading date, under 16 h and 24 h light, map to the same region. A QTL for heading date under these photoperiod regimes also maps to chromosome 2. Contrasting alleles at these loci interact in an epistatic fashion. A distinct set of QTLs mapping to chromosomes 1, 2, 3, and 5 determined heading date under 8 h of light. Under field conditions, all QTLs identified under controlled environment conditions were determinants of heading date. Patterns of differential QTL expression, coupled with additive and additive x additive QTL effects, underscore the complexity of winterhardiness. The presence of unique phenotype combinations in the mapping population suggests that coincident QTLs for heading date and winter survival represent the effects of linkage rather than pleiotropy.