Integrated flow-injection processing for on-line quantification of plasmid DNA during cultivation of E. coli

An integrated flow-injection processing (FIP) system for the quantification of plasmids during cultivation is described. The system performs on-line sampling, cell lysis, and quantification of plasmids in an integrated manner during cultivation of E. coli. The system was operated by using a miniaturized expanded-bed column which can be used for handling samples containing cells and cell debris without interfering with the binding analysis. Two types of detectors (one measuring UV absorbance at 254 nm and a fluorometer) are used for on-line plasmid detection. The system was developed using standard solutions and it was successfully applied in monitoring plasmid contents during a cultivation of E. coli.     

Rapid on-line protein detection in biotechnological processes by flow injection analysis (FIA)

Two rapid methods for on-line protein determination useful for control purposes in the automation of biotechnological processes such as fermentation and downstream processing are described. Both methods are derived from colorimetric laboratory biuret and Bradford protein assays adapted to a flow injection analyser.     

Bacteriocin production, plasmid content and plasmid location of enterocin P structural gene in enterococci isolated from food sources

AIMS: To characterize bacteriocin production, antimicrobial spectrum and plasmid content in bacteriocinogenic enterococci from foods. METHODS AND RESULTS: Bacteriocinogenic Enterococcus faecium (14 isolates) and Enterococcus faecalis (three isolates) showed two different patterns of bacteriocin production in liquid broth: exponential-phase and stationary-phase production. Bacteriocin concentrates from all enterococci were inactivated by trypsin, but seldom by heat (100-117 degrees C), extremes of pH (2.0 to 9.0) or reducing agents (such as dithiothreitol). All bacteriocin concentrates were active against Listeria innocua and Listeria monocytogenes, and most were also active against many Ent. faecalis and Ent. faecium isolates. Enterococci clustered in three main groups according to their plasmid content (which included plasmids from 2.0 to 53 kb). Several isolates from different foods showed almost identical plasmid profiles. The enterocin P structural gene (entP) was detected by hybridization on plasmids of c. 19, 26 and/or 35-38 kb. CONCLUSIONS: Enterococci from food show different patterns of bacteriocin production and different plasmid content in spite of carrying similar bacteriocin-encoding genes. SIGNIFICANCE AND IMPACT OF THE STUDY: This study provides information on the diversity of bacteriocinogenic enterococci from food sources carrying apparently similar enterocin genes.     

Amino acid supplementation decreases plasmid retention in Escherichia coli

The effect of amino acid supplementation on plasmid stability in Escherichia coli B/r was tested experimentally. Comparisons of experimental results to computer-predicted values were made using a detailed, structured single-cell model. The plasmid, pDW17 (a pBR322 derivative with a mutated tac promoter controlling the beta-lactamase gene), was used. In chemostat cultures, the amino acid supplemented cultures were always less stable than those grown in minimal medium. This effect was not a growth rate effect, as increasing growth rate imsproves stability for both cultures in minimal medium and in amino acid supplemented medium. The computer model also predicted a decrease in stability due to amino acid supplementation. The model also predicts that amino acid supplementation, combined with moderately strong plasmid-encoded protein expresion, results in a depletion of low-molecular-weight organics compared with plasmid-free cells. In minimal medium the same level of plasmid-encoded protein synthesis results in a strong reduction in amino acid pools compared with plasmid-free cells. With amino acid supplementation the growth differential between plasmid-bearing and plasmid-free cells may be due to an "energy limitation," while in minimal medium the size of the growth rate differential may be due to a "building block" limitation. (c) 1992 John Wiley & Sons, Inc.     

An automated flow injection analysis system for on-line monitoring of glucose and L-lactate during lactic acid fermentation in a recycle bioreactor

The study concerns on-line sequential analysis of glucose and L-lactate during lactic acid fermentation using a flow injection analysis (FIA) system. Enzyme electrodes containing immobilized glucose oxidase and L-lactate oxidase were used with an amperometric detection system. A 12-bit data acquisition card with 16 analog input channels and 8 digital output channels was used. The software for data acquisition was developed using Visual C++, and was devised for sampling every hour for sequential analyses of lactate and glucose. The detection range was found to be 2–100 g l^–1 for glucose and 1–60 g l^–1 for L-lactate using the biosensors. This FIA system was used for monitoring glucose utilization and L-lactate production by immobilized cells of Lactobacillus casei subsp. rhamnosus during a lactic acid fermentation process in a recycle batch reactor. After 13 h of fermentation, complete sugar utilization and maximal L-lactate production was observed. A good agreement was observed between analysis data obtained using the biosensors and data from standard analyses of reducing sugar and L-lactate. The biosensors exhibited excellent stability during continuous operation for at least 45 days.     

Isolation of a conjugative plasmid in Escherichia coli determining formaldehyde resistance

A clinical isolate of Escherichia coli which was resistant to the disinfectant formaldehyde was investigated. The strain harboured a plasmid of 62 MDa size. It was shown by conjugation, transformation and plasmid-curing experiments that the formaldehyde resistance is plasmid-mediated and transferable to other strains.     

On-line monitoring of enzymes in downstream processing by flow injection analysis (FIA)

Flow injection analysis (FIA) has been employed to automate enzyme assays for formate dehydrogenase (FDH) and l-leucine dehydrogenase (l-LeuDH). Coupled to a special sampling device the FIA assays were used to monitor on-line downstream processes, e.g. disintegration of microbial cells and cross-flow filtration of cell homogenates.     

High-throughput analysis of the plasmid bioproduction process in Escherichia coli by FTIR spectroscopy

Monitoring plasmid production systems is a lab intensive task. This article proposes a methodology based on FTIR spectroscopy and the use of chemometrics for the high-throughput analysis of the plasmid bioproduction process in E. coli. For this study, five batch cultures with different initial medium compositions are designed to represent different biomass and plasmid production behavior, with the maximum plasmid and biomass concentrations varying from 11 to 95 mg L(-1) and 6.8 to 12.8 g L(-1), respectively, and the plasmid production per biomass varying from 0.4 to 5.1 mg g(-1). After a short sample processing consisting of centrifugation and dehydration, the FTIR spectra are recorded from the collected cellular biomass using microtiter plates with 96 wells. After spectral pre-processing, the predictive FTIR spectra models are derived by using partial least squares (PLS) regression with the wavenumber selection performed by a Monte-Carlo strategy. Results show that it is possible to improve the PLS models by selecting specific spectral ranges. For the plasmid model, the spectral regions between 590-1,130, 1,670-2,025, and 2,565-3,280 cm(-1) are found to be highly relevant. Whereas for the biomass, the best wavenumber selections are between 900-1,200, 1,500-1,800, and 2,850-3,200 cm(-1). The optimized PLS models show a high coefficient of determination of 0.91 and 0.89 for the plasmid and biomass concentration, respectively. Additional PLS models for the prediction of the carbon sources glucose and glycerol and the by-product acetic acid, based on metabolism-induced correlations between the nutrients and the cellular biomass are also established.     

Improved stability and expression of a recombinant shuttle plasmid in Escherichia coli during fedbatch cultivation

The effect of higher cell densities on the expression and segregational stability of a recombinant E. coli- B. subtilisshuttle plasmid coding for carboxymethylcellulase (CMCase) activity, was studied in E. coli DH5. Of the various feeding policies adopted for maximal expression and stability, exponential feeding resulted in the highest biomass of 15g dry cell weight (DCW) l^–1 and plasmid stability of 45%. A CMCase activity of 11400 Uml^–1 was achieved as compared to 230 Uml^–1 during batch cultivation. In the case of other feeding strategies viz., constant feeding, linear feeding or intermittent feeding, the plasmid stability varied between 20% to 60%. Biomass achieved ranged from 5.0 g DCW l^–1 to 9.0 g DCW l^–1 and enzyme activities were between 2550 Uml^–1 and 6000 Uml^–1.     

Analysis of micromolar concentrations of glucose by an interference free flow injection based biosensor

A fast, sensitive, interference-free, single enzyme single reagent glucose biosensor, operated in flow injection analysis (FIA) mode, was developed. The method used involved formation of colored complex of titanium sulfate reagent with the peroxide generated by glucose oxidase immobilized in a packed bed reactor. The color developed was detected spectrophotometrically in a flow cuvette. The system could measure down to 0.5 mg glucose l^–1 and the response was reproducible and linear in the range 1 mg l^–1 to 100 mg l^–1. The analysis time for a 500 l sample was 35 s and was free of interference from a number of substances tested. Analysis results using an off-line batch kit were observed to be in agreement with the developed system for determination of glucose in blood plasma samples.     

Quantitation of glycerophosphorylcholine by flow injection analysis using immobilized enzymes

A method for quantitating glycerophosphorylcholine by flow injection analysis is reported in the present paper. Glycerophosphorylcholine phosphodiesterase and choline oxidase, immobilized on controlled porosity glass beads, are packed in a small reactor inserted in a flow injection manifold. When samples containing glycerophosphorylcholine are injected, glycerophosphorylcholine is hydrolyzed into choline and sn-glycerol-3-phosphate. The free choline produced in this reaction is oxidized to betain and hydrogen peroxide. Hydrogen peroxide is detected amperometrically.Quantitation of glycerophosphorylcholine in samples containing choline and phosphorylcholine is obtained inserting ahead of the reactor a small column packed with a mixed bed ion exchange resin. The time needed for each determination does not exceed one minute.The present method, applied to quantitate glycerophosphorylcholine in samples of seminal plasma, gave results comparable with those obtained using the standard enzymatic- spectrophotometric procedure.An alternative procedure, making use of co-immobilized glycerophosphorylcholine phosphodiesterase and glycerol-3-phosphate oxidase for quantitating glycerophosphorylcholine, glycerophosphorylethanolamine and glycerophosphorylserine is also described.Abbreviations GPC sn-glycerol-3-phosphorylcholine - GPE sn-glycerol-3-phosphorylethanolamine - GPS sn-glycerol-3-phosphorylserine - GPA sn-glycerol-3-phosphoric acid - PDE glycerophosphorylcholine-phosphodiesterase - GPA-Ox glycerophosphate oxidase - Cho-Ox choline oxidase     

Asymmetric replication of an oriC plasmid in Escherichia coli

Summary Plasmid pTSO118 containing the Escherichia coli origin of replication, oriC, initiated replication simultaneously with the chromosome when temperature-sensitive host cells were synchronized by temperature shifts. Replicating intermediates of the plasmid as well as of the chromosome were isolated from the outer membrane fraction of the cell. Plasmid DNA with eye structures was enriched when cytosine-1--arabinofuranoside was introduced into the culture during replication. Electron microscopy of the replicating molecules, after digestion with restriction endonucleases, showed that the replication fork proceeds exclusively counter-clockwise towards the unc operon. We conclude that the replication of the oriC plasmid is unidirectional or, if bidirectional, is highly asymmetric.     

Selective determination of lithium in biological fluids using flow injection analysis

The use of flow injection analysis to automated extraction methods for the determination of lithium ion utilizing crown ethers or cryptands is demonstrated. The ion-pair extraction of cryptand 211, lithium, and resazurin exhibits a linear range for lithium ion of 70 ppb to 2.1 ppm. This method could tolerate up to 1000 ppm sodium ion. The chromogenic crown ether, 1-(2-hydroxy-5-nitrobenzyl)-1-aza-4,7,10-trioxacyclododecane, exhibits a linear range for lithium ion of 0.3 to 2 ppm. A sodium ion concentration of 230 ppm can be tolerated. Both extraction systems were used in the automated determination of lithium in blood serum and urine. Both methods agreed well with the known and/or atomic absorption values.     

Determination of ammonium and L-Glutamine in hybridoma cell cultures by sequential flow injection analysis

A flow injection anlytical system based on a gas diffusion membrane module for ammonia and an ammonium flow-through potentiometric detector has been set up for measurement of L-glutamine and ammonium ions in hybridoma cell cultures. The main feature of the system is that the same basic analytical concept and equipment is used in both measurements, the only difference being for the determination of L-glutamine, in which the sample flows through an immobilized glutaminase cartridge. The conditions to enable the performance of both analysis consecutively, avoiding potential interferences by unwanted deamination of other compounds in the samples, have been determined. Finally, the proposed system has been compared with reference analytical methods for batch hybridoma cell culture experiments.