Ar+ plasma-induced damage to DNA in bacteriophage lambda: implications for the arrangement of DNA in the phage head.

Bacteriophage lambda was bombarded with low-energy Ar+ ions with the goal of determining whether particular regions of the DNA genome are found preferentially in the outer portion of the packaged DNA mass. The strategy was to fragment the DNA selectively near the surface of the virus by exposing intact phage to Ar+ ions energetic enough to break covalent chemical bonds in DNA but not energetic enough to penetrate deeply beneath the viral capsid shell. Broken DNA was then isolated, and its genomic origin was identified by Southern hybridization to mapped restriction fragments of lambda DNA. Analysis of such Southern blots revealed that all regions of the lambda genome were represented among the small DNA fragments generated during all times of Ar+ bombardment examined. Depending on the duration of exposure, however, particular regions of the genome were found to be enriched in the small-fragment population. After short periods of exposure, sequences from the leftmost 10% and from the right half of the standard genetic map were enriched in the broken-DNA fraction. Among sequences in the right half of the genome, the enrichment was progressively more pronounced beginning in the middle of the genetic map and proceeding toward the right end. In phage bombarded for longer periods of time, rightward sequences were preferentially depleted in the small-fragment population. In contrast, when Ar+ bombardment was carried out with free lambda DNA rather than intact phage, small DNA fragments arose uniformly from all regions of the genome at all times of exposure examined. The results indicate that in the intact phage, DNA sequences from the right half and from the very leftmost regions of the genome have a tendency to lie closer to the capsid than does the remainder of the genome. Since DNA is packaged into the prohead beginning at the left end, our results suggest that packaging occurs in such a way that newly entering DNA tends to be disposed externally to that packaged at earlier times.     

Domains for Protein-Protein Interactions at the N and C Termini of the Large Subunit of Bacteriophage λ Terminase

The large subunit of phage lambda terminase, gpA, the gene product of the phage A gene, interacts with the small subunit, gpNul, to form functional terminase. Terminase binds to lambda DNA at cosB to form a binary complex. The terminase:DNA complex binds a prohead to form a ternary complex. Ternary complex formation involves an interaction of the prohead with gpA. The amino terminus of gpA contains a functional domain for interaction with gpNul, and the carboxy-terminal 38 amino acids of gpA contain a functional domain for prohead binding. This information about the structure of gpA was obtained through the use of hybrid phages resulting from recombination between lambda and the related phage 21. lambda and 21 encode terminases that are analogous in structural organization and have ca. 60% sequence identity. In spite of these similarities, lambda and 21 terminases differ in specificity for DNA binding, subunit assembly, and prohead binding. A lambda-21 hybrid phage produces a terminase in which one of the subunits is chimeric and had recombinant specificities. In the work reported here; a new hybrid, lambda-21 hybrid 67, is characterized. lambda-21 hybrid 67 is the result of a crossover between lambda and 21 in the large subunit genes, such that the DNA from the left chromosome end is from 21, including cosB phi 21, the 1 gene, and the first 48 codons for the 2 gene. The rest of the hybrid 67 chromosome is lambda DNA, including 593 codons of the A gene. The chimeric gp2/A of hybrid 67 binds gp1 to form functional terminase.(ABSTRACT TRUNCATED AT 250 WORDS)     

Enhanced recovery and restriction mapping of DNA fragments cloned in a new lambda vector.

In this paper we describe a modification to the lambda vector EMBL3 which greatly expedites the construction of restriction maps of cloned DNA sequences. In the modified vector, EMBL3cos, all the phage coding sequences are placed to the right of the cloning sites so that the left cohesive end is separated by only 200bp, rather than 20kb (as in conventional lambda vectors), from the inserted DNA fragment. We show that reliable restriction maps can be rapidly constructed from partial digests of clones made in this vector by labelling the left cohesive end with a complementary 32P-labelled oligonucleotide. In addition, we quantify the restriction of clones containing human DNA by the McrA and McrB systems of E. coli and show that the use of Mcr- plating strains can increase the yield of recombinant phage up to tenfold, to give cloning efficiencies of greater than or equal to 10(7) pfu/microgram of human DNA.     

A functional domain of bacteriophage lambda terminase for prohead binding

Terminase is a multifunctional protein complex involved in DNA packaging during bacteriophage lambda assembly. Terminase is made of gpNul and gpA, the products of the phage lambda Nu1 and A genes. Early during DNA packaging terminase binds to lambda DNA to form a complex called complex I. Terminase is required for the binding of proheads by complex I to form a DNA: terminase: prohead complex known as complex II. Terminase remains associated with the DNA during encapsidation. The other known role for terminase in packaging is the production of staggered nicks in the DNA thereby generating the cohesive ends. Lambdoid phage 21 has cohesive ends identical to those of lambda. The head genes of lambda and 21 show partial sequence homology and are analogous in structure, function and position. The terminases of lambda and 21 are not interchangeable. At least two actions of terminase are involved in this specificity: (1) DNA binding; (2) prohead binding. The 1 and 2 genes at the left end of the 21 chromosome were identified as coding for the 21 terminase. gp1 and gp2 are analogous to gpNu1 and gpA, respectively. We have isolated a phage, lambda-21 hybrid 33, which is the product of a crossover between lambda and 21 within the terminase genes. Lambda-21 hybrid 33 DNA and terminase have phage 21 packaging specificity, as determined by complementation and helper packaging studies. The terminase of lambda-21 hybrid 33 requires lambda proheads for packaging. We have determined the position at which the crossover between lambda DNA and 21 DNA occurred to produce the hybrid phage. Lambda-21 hybrid 33 carries the phage 21 1 gene and a hybrid phage 2/A gene. Sequencing of lambda-21 hybrid 33 DNA shows that it encodes a protein that is homologous at the carboxy terminus with the 38 amino acids of the carboxy terminus of lambda gpA; the remainder of the protein is homologous to gp2. The results of these studies define a specificity domain for prohead binding at the carboxy terminus of gpA.     

Identification of sequences necessary for packaging DNA into lambda phage heads

Several species of DNA molecules are packaged into lambda phage heads if they carry the region around the cohesive end site of lambda phage (cos lambda). The minimal functional sequence around cos lambda needed for packaging was examined by cloning in pBR322. The results showed that the minimal region contained 85 bp around cos lambda; 45 bp of the left arm of lambda phage and 40 bp of the right arm. A 75-bp region located to the right of the minimal region seems to enhance packaging. A 223-bp fragment containing these regions can be used as a portable element for plasmid DNA packaging into lambda phage heads. Plasmid ppBest 322, a derivative of pBR322 carrying this portable packager and both amp and tet genes, was constructed. This plasmid is useful for cloning of large DNA fragments.     

Synthesis of a trans-Acting Inhibitor of DNA Maturation by Prohead Mutants of Phage λ

Bacteriophage lambda with mutations in genes that control prohead assembly and other head precursors cannot mature their DNA. In this paper we present evidence that the failure of these phage mutants to mature DNA is a reflection of a mechanism that modulates terminase nicking activity during normal phage development. We have constructed plasmids that contain the lambda-cohesive end site (cos) and the genes that code for DNA terminase, the enzyme that matures DNA by cutting at cos. The DNA terminase genes are under control of a thermosensitive cI repressor. These plasmids lack most of the genes involved in prohead morphogenesis and other head precursors. However, when repression is lifted by destruction of the thermosensitive repressor, the terminase synthesized is able to cut almost 100% of the plasmids. Therefore, these plasmids can mature in the absence of proheads and other head gene products. The plasmids are also able to complement mutants of lambda deficient in terminase and DNA maturation. However, in these complementation experiments, if the phage carry mutations in prohead genes E or B, not only is phage DNA maturation blocked, but the plasmid also fails to mature. These experiments show that, in the absence of proheads, phage lambda produces a trans-acting inhibitor of maturation. The genetic determinant of this inhibitor maps in a region extending from the middle of gene B to the end of gene C. A model is proposed in which the nicking activity of DNA-bound terminase is inhibited by the trans-acting inhibitor. Prohead (and other factors) binding to this complex would release the block to allow DNA cleavage and packaging.     

RNA-primed initiation sites of DNA replication in the origin region of bacteriophage lambda genome.

Using DNA molecules synthesized in the early stage of lambda phage infection, deoxynucleotides at the transition sites from primer RNA to DNA synthesis have been mapped in the 1.5 kbase area of the lambda phage genome containing the genetically defined replication origin (ori lambda). Sites in the 1-strand (the polarity of the 1-strand is 5' to 3' from the left to the right direction of the lambda phage genetic map) were distributed both inside and outside of the ori lambda, whereas the sites in the r-strand (the strand in the opposite polarity) were mainly distributed more than three hundred nucleotides apart from the ori lambda to the right. A CPuPu sequence was found at -12 to -10 region of transition sites of the r- and the 1-strands in the frequency of 80% and 70%, respectively, and over 60% of the CPuPu sequences were CAG. Properties of the transition sites are discussed in relation to the primer synthesis.     

A specialized transducing phage, lambda psrlA, for the sorbitol phosphotransferase of Escherichia coli K12

A specialized transducing phage for the srlA gene, specifying the sorbitol-specific Enzyme II of the phosphoenolpyruvate:sugar phosphotransferase system, was constructed and its DNA was analysed by restriction endonuclease digestion. Phage construction involved four steps: (1) integration of lambda into the srlA gene; (2) selection of phage carrying (a) the left and (b) the right end of the srlA gene by means independent of the function of the new DNA acquired; (3) reconstitution of the srlA gene in a dilysogen of these two phage; and (4) the excision, using the heteroimmune lambdoid phage 21, of a plaque-forming srlA+ phage from the dilysogenic chromosome. Comparison of the DNA restriction digests of the transducing phage with those of its parents and of wild-type lambda revealed fragments consisting partly of lambda and partly of Escherichia coli DNA. The junction points in the intermediate phage define a site that must lie within the reconstituted gene of the final phage. This technique should be of general application in relating genes, cloned by our method, to DNA sequences.     

Nucleotide sequence of the cro-cII-oop region of bacteriophage 434 DNA.

The nucleotide sequence of a 869 bp segment of phage 434 DNA including the regulatory genes cro and cII is presented and compared with the corresponding part of the phage lambda DNA sequence. The 434 cro protein as deduced from the DNA sequence is a highly basic protein of 71 amino acid residues with a calculated molecular weight of 8089. While the cro gene sequences of phage 434 and lambda DNA are very different, the nuleotide sequences to the right of the lambda imm434 boundary show differences only at 11 out of 512 positions. Nucleotide substitutions in the cII gene occur with one exception in the third positions of the respective codons and only one out of several DNA regulatory signals located in this region of the phage genomes is affected by these nucleotide substitutions.     

Structural bases of a long-stretched deletion: completing the lambda plac5 DNA primary structure.

In studying molecular mechanisms of specialised transduction, the lacI (E. coli)-Ea47 (lambda) DNA junction in transducing bacteriophage lambda plac 5 has been structurally elucidated, thus yielding the complete sequence of lambda plac 5 DNA including the lac5 substitution, a well-known segment of lambdoid vectors. The lambda plac5 DNA is shown to consist of 19368 bp (lambda left arm) + 3924 bp (lac5 substitution) + 25353 bp (lambda right arm), totally amounting to 48645 bp. The presence of the phage rho bL promoter near to the right end of the lac5 insert is shown. The lacI gene distal end in lambda plac5 proved to be much longer than it was postulated earlier, coding for 224 C-terminal amino acid residues of lac repressor. Both the recombination studied in this paper and the earlier studied abnormal prophage excision (2, 3) occur near to Chi-like structures (chi*lacI and chi*lom, respectively). On the basis of the data obtained, a key role of the E. coli RecBCD system and Chi-like sequences in the formation of deletions in bacterial cells is suggested.     

The Nul subunit of bacteriophage lambda terminase binds to specific sites in cos DNA.

The maturation and packaging of bacteriophage lambda DNA are under the control of the multifunctional viral terminase enzyme, which is composed of the protein products of Nu1 and A, the two most leftward genes of the phage chromosome. Terminase binds selectively to the cohesive end site (cos) of multimeric replicating lambda DNA and introduces staggered nicks to regenerate the 12-base single-stranded cohesive ends of the mature phage genome. The purified gpNu1 subunit of terminase forms specific complexes with cos lambda DNA. DNase I footprinting experiments showed that gpNu1 bound to three distinct regions near the extreme left end of the lambda chromosome. These regions coincided with two 16-base-pair sequences (CTGTCGTTTCCTTTCT) that were in inverted orientation, as well as a truncated version of this sequence. Bear et al. (J. Virol. 52:966-972,1984) isolated a mutant phage which contained a CG to TA transition at the 10th position of the rightmost 16-base-pair sequence, and this phage (termed lambda cos 154) exhibits a defect in DNA maturation when it replicates in Escherichia coli which is deficient in integration host factor. Footprinting experiments with cos 154 DNA showed that gpNu1 could not bind to the site which contained the mutation but could protect the other two sites. Since the DNA-packaging specificity of terminase resides in the gpNu1 subunit, these studies suggest that terminase uses these three sites as recognition sequences for specific binding to cos lambda.     

λ噬菌体和Cosmid重组DNA克隆的快速限制性内切酶图谱分析方法

cosmld克隆的线性化用λcos末端酶来完成,线性的cosmid或λDNA经部份限制性内切酶酶解后,分别与已标记的cos顺序探针杂交(探针为分别与λ的左端或右端的cos顺序互补的12核苷酸单链片段),杂交后的部份酶解片段经电泳分离和自显影后,酶切点位置可直接在X-底片上读出。在本实验室条件下,可一次完成二个克隆包括5—6种限制性内切酶的图谱分析,分析和作图可通过计算机或手工进行。     

Characterization of the small RNA of the bacteriophage phi 29 DNA packaging machine.

The prohead connector of the bacteriophage luminal diameter 29 DNA packaging machine was reconstructed with the small RNA that regulates DNA packaging in vitro. The complete sequence of the 120 nucleotide RNA proved its origination from the promoter PE1(A1) of the left early region of phi 29 DNA, the end packaged first during assembly. The prohead RNA was clearly distinct from eubacterial 5S rRNA in sequence and composition.     

Primary structure of an EcoRI fragment of lambda imm434 DNA containing regions cI-cro of phage 434 and cII-o of phage lambda.

Digestion of phage lambda imm434 DNA with restriction endonuclease EcoRI yields 7 fragments. The shortest among them (1287 bp) contains the right part of the phage 434 immunity region and the phage DNA portion proximal to it. The complete primary structure of this fragment has been determined using the chemical method of DNA sequencing. Hypothetical amino-acid sequences of proteins coded by the cro gene of phage 434 and the cII gene of phage lambda, as well as NH2-terminal amino-acid sequences of the cI protein of phage 434 and the O protein of phage lambda, have been deduced solely on the basis of the DNA sequence. The fragment studied contains also the pR and probably prm promoters and the oR operator of phage 434. The sequence coding for them differs from the respective DNA sequence of phage lambda.     

Deletion analysis of the DNA sequence required for the in vitro initiation of replication of bacteriophage lambda

Supercoiled DNA containing the replication origin of bacteriophage lambda can be replicated in vitro. This reaction requires purified lambda O and P replication proteins and a partially purified mixture of Escherichia coli proteins (Tsurimoto, T., and Matsubara, K. (1982) Proc. Natl. Acad. Sci. U.S.A. 79, 7639-7643; Wold, M. S., Mallory, J.B., Roberts, J. D., LeBowitz, J. H., and McMacken, R. (1982) Proc. Natl. Acad. Sci. U.S.A. 79, 6176-6180). The lambda origin region has four repeats of a 19-base pair sequence to which O protein binds. To the right of these sites on the lambda map is a 40-base pair region that is rich in adenine and thymine, followed by a 28-base pair palindromic sequence. To define more precisely the boundaries of the lambda origin, we cloned a 358-base pair piece of lambda DNA containing the origin region into M13mp8 in both orientations. In vitro replication of RF I DNAs prepared from cells infected with these two M13 ori lambda phage was dependent on lambda O and P proteins and a crude protein fraction from uninfected E. coli; with these conditions there was no replication of M13mp8 RF I DNA. We made deletions from the left and the right ends of the lambda origin DNA and determined the deletion end points by DNA sequencing. We have tested RF I DNAs prepared from cells infected with phage carrying ori lambda deletions for their ability to function as templates for O- and P-dependent replication in vitro. Our results show that lambda DNA between nucleotide positions 39072 and 39160 is required for efficient O- and P-dependent replication. This 89-base pair piece of DNA includes only two of the four 19-base pair O protein-binding sites (the two right-most) and the adjoining adenine- and thymine-rich region to the right of the O-binding sites.     

Initial cos cleavage of bacteriophage lambda concatemers requires proheads and gpFI in vivo

The development of bacteriophage lambda and double-stranded DNA viruses in general involves the convergence of two separate pathways: DNA replication and head assembly. Clearly, packaging will proceed only if an empty capsid shell, the prohead, is present to receive the DNA, but genetic evidence suggests that proheads play another role in the packaging process. For example, lambda phages with an amber mutation in any head gene or in FI, the gene encoding the accessory packaging protein gpFI, are able to produce normal amounts of DNA concatemers but they are not cut, or matured, into unit length chromosomes for packaging. Similar observations have been made for herpes simplex 1 virus. In the case of lambda, a negative model proposes that in the amber phages, unassembled capsid components are inhibitory to maturation, and a positive model suggests that assembled proheads are required for cutting. We tested the negative model by using a deletion mutant devoid of all prohead genes and FI in an in vivo cos cleavage assay; in this deleted phage, the cohesive ends were not cut. When lambda proheads and gpFI were provided in vivo via a second prophage, cutting was restored, and gpFI was required, results that support the positive model. Phage 21 is a sister phage of lambda, and although its capsid proteins share approximately 60% residue identity with lambda's, phage 21 proheads did not restore cutting, even when provided with the accessory protein gpFI. Models for the role of proheads and gpFI in cos cutting are discussed.     

The DNA between Rz and cosR in bacteriophage lambda is nonessential

Near the right end of phage lambda DNA, between gene Rz and the cos site, are 2050 bp of apparently non-coding DNA. We have cloned a lambda DNA fragment containing this DNA into a plasmid and constructed a deletion, omega l, extending from a site within the Rz gene to a site about 560 bp from cos. This deletion could be recombined into viable lambda phage at a frequency equal to that observed for the undeleted sequence. Recombinant phage lambda carrying the omega l deletion were demonstrated to have the same burst size and kinetics of phage production as undeleted lambda. The omega l deletion can be used to extend the capacity of lambda cloning vectors and to provide a region for the insertion of heterologous DNA which should exhibit controllable high level expression from the lambda late promoter, p'R.     

Direct and general selection for lysogens of Escherichia coli by phage lambda recombinant clones.

We report a simple in vivo technique for introducing an antibiotic resistance marker into phage lambda. This technique could be used for direct selection of lysogens harboring recombinant phages from the Kohara lambda bank (a collection of ordered lambda clones carrying Escherichia coli DNA segments). The two-step method uses homologous recombination and lambda DNA packaging to replace the nonessential lambda DNA lying between the lysis genes and the right cohesive (cos) end with the neomycin phosphotransferase (npt) gene from Tn903. This occurs during lytic growth of the phage on a plasmid-containing host strain. Neomycin-resistant (npt+) recombinant phages are then selected from the lysates containing the progeny phage by transduction of a polA1 lambda lysogenic host strain to neomycin resistance. We have tested this method with two different Kohara lambda phage clones; in both cases, neomycin resistance cotransduced with the auxotrophic marker carried by the lambda clone, indicating complete genetic linkage. Linkage was verified by restriction mapping of purified DNA from a recombinant phage clone. We also demonstrate that insertion of the npt+ recombinant phages into the lambda prophage can be readily distinguished from insertion into bacterial chromosomal sequences.     

Sites and gene products involved in lambdoid phage DNA packaging.

21 is a temperate lambdoid coliphage, and the genes that encode the head proteins of lambda and 21 are descended from a common ancestral bacteriophage. The sequencing of terminase genes 1 and 2 of 21 was completed, along with that of a segment at the right end of 21 DNA that includes the R4 sequence. The R4 sequence, a site that is likely involved in termination of DNA packaging, was found to be very similar to the R4 sequences of lambda and phi 80, suggesting that R4 is a recognition site that is not phage specific. DNA packaging by 21 is dependent on a host protein, integration host factor. A series of mutations in gene 1 (her mutations), which allow integration host factor-independent DNA packaging by 21, were found to be missense changes that affect predicted alpha-helixes in gp1. gp2, the large terminase subunit, is predicted to contain an ATP-binding domain and, perhaps, a second domain important for the cos-cutting activity of terminase. orf1, an open reading frame analogous in position to FI, a lambda gene involved in DNA packaging, shares some sequence identity with FI. orf1 was inactivated with nonsense and insertion mutations; these mutations were found not to affect phage growth. 21 was also not able to complement a lambda FI mutant.