Evaluation of high butanol/acetone ratios in ABE fermentations with cassava by graph theory and NADH regeneration analysis

Higher butanol/acetone ratio is always desirable in ABE fermentation, and this ratio is closely associated with the complicated patterns of metabolic reactions and NADH generation rate. The patterns of acetate/butyrate formation and re-assimilation in multiple closed reaction loops, as well as NADH regeneration in ABE fermentation using different substrates varies. In this study, we evaluated butanol/acetone ratio in ABE fermentations utilizing cassava and corn based media by graph theory and NADH regeneration analysis. The theoretical calculations and experimental data revealed that a lower metabolic strength in butyrate loop and enhanced NADH generation rate were responsible for the achievement of higher butanol/acetone ratio when fermenting cassava based substrate. In traditional fermentations and extractive fermentations with oleyl alcohol/bio-diesel as the extractants when using cassava based substrate, butanol/acetone ratios reached 2.24, 2.84, and 2.19 with the increasing increments of 14.9, 61.4, and 6.8% respectively, while butanol productivities stayed at comparably high levels as compared with those of the fermentations when cultivating on corn based substrate.     

乙、丁酸添加条件下丁醇发酵图论模型的构建

有机酸代谢途径在丁醇发酵过程中具有重要的作用,对细胞内碳流的分配和产物的合成影响显著。在7 L厌氧发酵罐中,进行了间歇添加乙酸或丁酸的发酵实验。结果表明,乙、丁酸的添加显著提高了总溶剂的生产效率,分别提高了47.1%和39.2%;此外,丁醇/丙酮比在添加丁酸的批次中提高了21.7%,在添加乙酸的批次中降低了16.2%;厌氧瓶中的发酵实验也证实了以上结果。有机酸代谢计算的结果表明,乙、丁酸的添加基本上阻断了相应有机酸闭环的吸收途径。基于相关报道和代谢计算结果,构建了针对乙、丁酸添加批次的图论模型,并利用该模型对不同发酵条件下的溶剂浓度和丁醇/丙酮比进行了计算。结果表明,该模型很好地预测了实验结果,合理地构建了乙、丁酸添加批次的信号传递线图。     

木薯和玉米原料丁醇发酵中丁醇丙酮质量比的图论理论计算及其验证

在丁醇发酵产溶剂阶段,乙酸和丁酸的生成途径、消耗途径同时存在,各自形成一个闭环路径。本研究利用图论对丁醇发酵中丁醇丙酮质量比进行了理论计算,并对以木薯和玉米为原料的丁醇发酵进行了模拟计算,结果表明:丁酸闭环路径(L2环)的代谢强度是影响丁醇丙酮质量比的主要因素,并且L2环的代谢强度越弱,丁醇丙酮质量比越高;与玉米原料丁醇发酵相比,木薯原料发酵的m(丁醇)/m(丙酮)提高了16.7%。实验结果证实了以上计算结果:在传统发酵、油醇萃取发酵和生物柴油萃取发酵中,以木薯(适时添加酵母浸粉)为原料的发酵批次与以玉米为原料的发酵批次相比,由于其丁酸闭环路径代谢强度较弱,相应发酵方式下丁醇丙酮质量比分别提高了12.9%、61.4%和6.7%,而且两种原料相应发酵方式的丁醇总产量和生产效率基本持平。另外,高丁醇丙酮质量比的木薯发酵所得改良型生物柴油中丁醇浓度与玉米发酵的相比提高了16%,性能得到进一步提高。     

Enhancement of ABE fermentation through regulation of ammonium acetate and D–xylose uptake from acid-pretreated corncobs

Clostridium acetobutylicum TISTR 1462 and Clostridium beijerinckii TISTR 1461 were chosen to optimize acetone–butanol–ethanol (ABE) fermentation by using glucose as a carbon source. The enhancement in its productivity by adding various concentrations of ammonium acetate was studied. Then, the variation of glucose/xylose ratios in the pre-grown medium was investigated. The results showed that both increased ammonium acetate in the production medium and D–xylose in the pre-grown medium could produce more ABE. With these conditions, using corncob hydrolysate as a substrate, 20.58 g/L ABE was produced from C. beijerinckii TISTR 1461 with 0.44 g/L/h and 0.45 of ABE productivity and yield, respectively.     

Biobutanol production in a Clostridium acetobutylicum biofilm reactor integrated with simultaneous product recovery by adsorption

Background

Clostridium acetobutylicum can propagate on fibrous matrices and form biofilms that have improved butanol tolerance and a high fermentation rate and can be repeatedly used. Previously, a novel macroporous resin, KA-I, was synthesized in our laboratory and was demonstrated to be a good adsorbent with high selectivity and capacity for butanol recovery from a model solution. Based on these results, we aimed to develop a process integrating a biofilm reactor with simultaneous product recovery using the KA-I resin to maximize the production efficiency of biobutanol.

Results

KA-I showed great affinity for butanol and butyrate and could selectively enhance acetoin production at the expense of acetone during the fermentation. The biofilm reactor exhibited high productivity with considerably low broth turbidity during repeated batch fermentations. By maintaining the butanol level above 6.5 g/L in the biofilm reactor, butyrate adsorption by the KA-I resin was effectively reduced. Co-adsorption of acetone by the resin improved the fermentation performance. By redox modulation with methyl viologen (MV), the butanol-acetone ratio and the total product yield increased. An equivalent solvent titer of 96.5 to 130.7 g/L was achieved with a productivity of 1.0 to 1.5 g?·?L^-1?·?h^-1. The solvent concentration and productivity increased by 4 to 6-fold and 3 to 5-fold, respectively, compared to traditional batch fermentation using planktonic culture.

Conclusions

Compared to the conventional process, the integrated process dramatically improved the productivity and reduced the energy consumption as well as water usage in biobutanol production. While genetic engineering focuses on strain improvement to enhance butanol production, process development can fully exploit the productivity of a strain and maximize the production efficiency.     

High-titer n-butanol production by clostridium acetobutylicum JB200 in fed-batch fermentation with intermittent gas stripping

Acetone–butanol–ethanol (ABE) fermentation with a hyper‐butanol producing Clostridium acetobutylicum JB200 was studied for its potential to produce a high titer of butanol that can be readily recovered with gas stripping. In batch fermentation without gas stripping, a final butanol concentration of 19.1 g/L was produced from 86.4 g/L glucose consumed in 78 h, and butanol productivity and yield were 0.24 g/L h and 0.21 g/g, respectively. In contrast, when gas stripping was applied intermittently in fed‐batch fermentation, 172 g/L ABE (113.3 g/L butanol, 49.2 g/L acetone, 9.7 g/L ethanol) were produced from 474.9 g/L glucose in six feeding cycles over 326 h. The overall productivity and yield were 0.53 g/L h and 0.36 g/g for ABE and 0.35 g/L h and 0.24 g/g for butanol, respectively. The higher productivity was attributed to the reduced butanol concentration in the fermentation broth by gas stripping that alleviated butanol inhibition, whereas the increased butanol yield could be attributed to the reduced acids accumulation as most acids produced in acidogenesis were reassimilated by cells for ABE production. The intermittent gas stripping produced a highly concentrated condensate containing 195.9 g/L ABE or 150.5 g/L butanol that far exceeded butanol solubility in water. After liquid–liquid demixing or phase separation, a final product containing ～610 g/L butanol, ～40 g/L acetone, ～10 g/L ethanol, and no acids was obtained. Compared to conventional ABE fermentation, the fed‐batch fermentation with intermittent gas stripping has the potential to reduce at least 90% of energy consumption and water usage in n‐butanol production from glucose. Biotechnol. Bioeng. 2012; 109: 2746–2756. © 2012 Wiley Periodicals, Inc.     

New insights into the butyric acid metabolism of Clostridium acetobutylicum

Biosynthesis of acetone and n-butanol is naturally restricted to the group of solventogenic clostridia with Clostridium acetobutylicum being the model organism for acetone-butanol-ethanol (ABE) fermentation. According to limited genetic tools, only a few rational metabolic engineering approaches were conducted in the past to improve the production of butanol, an advanced biofuel. In this study, a phosphotransbutyrylase-(Ptb) negative mutant, C. acetobutylicum ptb::int(87), was generated using the ClosTron methodology for targeted gene knock-out and resulted in a distinct butyrate-negative phenotype. The major end products of fermentation experiments without pH control were acetate (3.2?g/l), lactate (4.0?g/l), and butanol (3.4?g/l). The product pattern of the ptb mutant was altered to high ethanol (12.1?g/l) and butanol (8.0?g/l) titers in pH?≥?5.0-regulated fermentations. Glucose fed-batch cultivation elevated the ethanol concentration to 32.4?g/l, yielding a more than fourfold increased alcohol to acetone ratio as compared to the wildtype. Although butyrate was never detected in cultures of C. acetobutylicum ptb::int(87), the mutant was still capable to take up butyrate when externally added during the late exponential growth phase. These findings suggest that alternative pathways of butyrate re-assimilation exist in C. acetobutylicum, supposably mediated by acetoacetyl-CoA:acyl-CoA transferase and acetoacetate decarboxylase, as well as reverse reactions of butyrate kinase and Ptb with respect to previous studies.     

Acetone–butanol–ethanol production with high productivity using Clostridium acetobutylicum BKM19

Conventional acetone–butanol–ethanol (ABE) fermentation is severely limited by low solvent titer and productivities. Thus, this study aims at developing an improved Clostridium acetobutylicum strain possessing enhanced ABE production capability followed by process optimization for high ABE productivity. Random mutagenesis of C. acetobutylicum PJC4BK was performed by screening cells on fluoroacetate plates to isolate a mutant strain, BKM19, which exhibited the total solvent production capability 30.5% higher than the parent strain. The BKM19 produced 32.5 g L^?1 of ABE (17.6 g L^?1 butanol, 10.5 g L^?1 ethanol, and 4.4 g L^?1 acetone) from 85.2 g L^?1 glucose in batch fermentation. A high cell density continuous ABE fermentation of the BKM19 in membrane cell‐recycle bioreactor was studied and optimized for improved solvent volumetric productivity. Different dilution rates were examined to find the optimal condition giving highest butanol and ABE productivities. The maximum butanol and ABE productivities of 9.6 and 20.0 g L^?1 h^?1, respectively, could be achieved at the dilution rate of 0.85 h^?1. Further cell recycling experiments were carried out with controlled cell‐bleeding at two different bleeding rates. The maximum solvent productivities were obtained when the fermenter was operated at a dilution rate of 0.86 h^?1 with the bleeding rate of 0.04 h^?1. Under the optimal operational condition, butanol and ABE could be produced with the volumetric productivities of 10.7 and 21.1 g L^?1 h^?1, and the yields of 0.17 and 0.34 g g^?1, respectively. The obtained butanol and ABE volumetric productivities are the highest reported productivities obtained from all known‐processes. Biotechnol. Bioeng. 2013; 110: 1646–1653. © 2013 Wiley Periodicals, Inc.     

Characterization of recombinant strains of the Clostridium acetobutylicum butyrate kinase inactivation mutant: need for new phenomenological models for solventogenesis and butanol inhibition?

Two metabolic engineering tools, namely gene inactivation and gene overexpression, were employed to examine the effects of two genetic modifications on the fermentation characteristics of Clostridium acetobutylicum. Inactivation of the butyrate kinase gene (buk) was examined using strain PJC4BK, while the combined effect of buk inactivation and overexpression of the aad gene-encoding the alcohol aldehyde dehydrogense (AAD) used in butanol formation-was examined using strain PJC4BK(pTAAD). The two strains were characterized in controlled pH > or = 5.0 fermentations, and by a recently enhanced method of metabolic flux analysis. Strain PJC4BK was previously genetically characterized, and fermentation experiments at pH > or = 5.5 demonstrated good, but not exceptional, solvent-production capabilities. Here, we show that this strain is a solvent superproducer in pH > or = 5.0 fermentations producing 225 mM (16.7 g/L) of butanol, 76 mM of acetone (4.4 g/L), and 57 mM (2.6 g/L) of ethanol. Strain PJC4BK(pTAAD) produced similar amounts of butanol and acetone but 98 mM (4.5 g/L) of ethanol. Both strains overcame the 180 mM (13 g/L) butanol toxicity limit, without any selection for butanol tolerance. Work with strain PJC4BK(pTAAD) is the first reported use of dual antibiotic selection in C. acetobutylicum. One antibiotic was used for selection of strain PJC4BK while the second antibiotic selected for the pTAAD presence. Overexpression of aad from pTAAD resulted in increased ethanol production but did not increase butanol titers, thus indicating that AAD did not limit butanol production under these fermentation conditions. Metabolic flux analysis showed a decrease in butyrate formation fluxes by up to 75% and an increase in acetate formation fluxes of up to 100% during early growth. The mean specific butanol and ethanol formation fluxes increased significantly in these recombinant strains, up to 300% and 400%, respectively. Onset of solvent production occurred during the exponential-growth phase when the culture optical density was very low and when total and undissociated butyric acid levels were <1 mM. Butyrate levels were low throughout all fermentations, never exceeding 20 mM. Thus, threshold butyrate concentrations are not necessary for solvent production in these stains, suggesting the need for a new phenomenological model to explain solvent formation.     

限制葡萄糖、葡萄糖/乙酸双底物条件下自由控制丙丁梭菌ABE发酵丙酮浓度和丙酮/丁醇比

提出一种可以提高和自由控制丙丁梭菌ABE发酵丙酮浓度与丙酮/丁醇比的方法。（1）通过控制糖化酶用量、反应时间和温度调节玉米培养基初始葡萄糖浓度,使发酵进入到产溶剂期后,残留葡萄糖浓度降至接近于0 g/L的水平;（2）在葡萄糖受限的条件下,诱导丙丁梭菌合成分泌糖化酶,分解寡糖,将葡萄糖维持于低浓度,进而限制梭菌胞内糖酵解途径的碳代谢和NADH生成速度。与此同时,外添乙酸形成葡萄糖/乙酸双底物环境。在能量代谢基本不受破坏、丁醇未达到抑制浓度的条件下,适度抑制丁醇生产,有效地利用外添乙酸强化丙酮合成;（3）在外添乙酸的基础上,添加适量酿酒酵母,形成丙丁梭菌/酿酒酵母混合发酵体系,提高梭菌对高丁醇浓度的耐受能力。整个发酵体系可以将丙酮浓度和丙酮/丁醇比自由控制在5~12 g/L和0.5~1.0的水平,最大丙酮浓度和丙酮/丁醇比达到11.74 g/L和1.02,并可维持丁醇浓度于10~14 g/L的正常水平,充分满足工业ABE发酵对于丙酮和丁醇产品的不同需求。     

Acetone–Butanol–Ethanol Production by Clostridium acetobutylicum ATCC 824 Using Sago Pith Residues Hydrolysate

Sago pith residues (58 % starch, 23 % cellulose, 9.2 % hemicellulose, and 4 % lignin) are one of the abundant lignocellulosic residues generated after starch extraction process in sago mill. In this study, fermentable sugars from enzymatic hydrolysis of sago pith residues were converted to acetone–butanol–ethanol (ABE) by Clostridium acetobutylicum ATCC 824. With an initial concentration of 30 g/L of concentrated sago pith residues hydrolysate containing 23 g/L of glucose and 4.58 g/L of cellobiose, 4.22?±?0.17 g/L of ABE were produced after 72 h of fermentation with yield and productivity of 0.20 g/g glucose and 0.06 g/L/h, respectively. Results are in agreement when synthetic glucose was used as a carbon source. Increasing sago pith residue hydrolysate to 50 g/L (containing 40 g/L glucose) and supplementing with 0.5 g/L yeast extract, approximately 8.84?±?0.20 g/L of ABE (5.41?±?0.10 g/L of butanol) were produced with productivity and yield of 0.12 g/L/h and 0.30 g/g glucose respectively, providing a 52 % improvement.     

Ex situ product recovery for enhanced butanol production by <Emphasis Type="Italic">Clostridium beijerinckii</Emphasis>

In situ butanol recovery fermentation has been intensively studied as an effective alternative to conventional butanol production, which is limited due to the cellular toxicity of butanol. However, the low biocompatibility of adsorbents often leads to failure of in situ recovery fermentations. In this study, Clostridium beijerinckii NCIMB 8052 was cultured in flasks without shaking and in situ recovery fermentation was performed by using an adsorbent L493. The amounts of acetone, butanol, and ethanol (ABE) increased by 34.4 % in the presence of the adsorbent. In contrast, cell growth and production of organic acids and ABE were retarded in the 7-L batch fermentations with in situ butanol recovery. Cell damage occurred in the fermentor upon agitation in the presence of the adsorbent, unlike in static flask cultures with in situ recovery. Ex situ recovery fermentation using circulation of fermentation broth after mid-exponential phase of cell growth was developed to avoid adsorbent-cell incompatibility. No apparent cell damage was observed and 25.7 g/L of ABE was produced from 86.2 g/L glucose in the fed-batch mode using 7 L fermentors. Thus, ex situ recovery fermentation with C. beijerinckii is effective for enhancing butanol fermentation.     

Uptake and activation of acetate and butyrate in Clostridium acetobutylicum

Summary The pathway for uptake of acids during the solvent formation phase of an acetone-butanol fermentation by Clostridium acetobutylicum ATCC 824 was studied. ¹³C NMR investigations on actively metabolizing cells showed that butyrate can be taken up from the medium and quantitatively converted to butanol without accumulation of intermediates. The activities of acetate phosphotransacetylase, acetate kinase and phosphate butyryltransferase rapidly decreased to very low levels when the organism began to form solvents. This indicates that the uptake of acids does not occur via a reversal of these acid forming enzymes. No short-chain acyl-CoA synthetase activity or butyryl phosphate reducing activity could be detected. Based on our results and a critical analysis of literature data on acetone-butanol fermentations, it is suggested that an acetoacetyl-CoA: acetate (butyrate) CoA-transferase is solely responsible for uptake and activation of acetate and butyrate in C. acetobutylicum. The transferase exhibits a broad carboxylic acid specificity. The key enzyme in the uptake is acetoacetate decarboxylase, which is induced late in the fermentation and pulls the transferase reaction towards formation of acetoacetate. The major implication is that it is not feasible to obtain a batch-wise butanol fermentation without acetone formation and retention of a good yield of butanol.     

Promotion of the Clostridium acetobutylicum ATCC 824 growth and acetone–butanol–ethanol fermentation by flavonoids

An unexpected promotion effect of Ginkgo leaf on the growth of Clostridium acetobutylicum ATCC 824 and acetone–butanol–ethanol (ABE) fermentation was investigated. Component analysis of Ginkgo leaf was carried out and flavonoids were determined as the potential key metabolites. Then the flavonoids feeding experiments were carried out. Results showed that addition of only 10 mg/L flavonoids to the fermentation broth can promote butanol and ABE titre up to 14.5 and 17.8 g/L after 5 days of fermentation, that is, 74 and 68 % higher than the control. A 2.2-fold biomass also has been achieved. Furthermore, by employing such novel founding, we easily exploited flavonoids from soybean and some agriculture wastes as the wide-distributed and economic feasible ABE fermentation promoter. The mechanism of the above effects was investigated from the perspective of oxidation–reduction potential. This work opens a new way in the efforts to increase the titer of butanol.     

Acetone–butanol–ethanol production from corn stover pretreated by alkaline twin-screw extrusion pretreatment

In this study, the alkaline twin-screw extrusion pretreated corn stover was subjected to enzymatic hydrolysis after washing. The impact of solid loading and enzyme dose on enzymatic hydrolysis was investigated. It was found that 68.2 g/L of total fermentable sugar could be obtained after enzymatic hydrolysis with the solid loading of 10 %, while the highest sugar recovery of 91.07 % was achieved when the solid loading was 2 % with the cellulase dose of 24 FPU/g substrate. Subsequently, the hydrolyzate was fermented by Clostridium acetobutylicum ATCC 824. The acetone–butanol–ethanol (ABE) production of the hydrolyzate was compared with the glucose, xylose and simulated hydrolyzate medium which have the same reducing sugar concentration. It was shown that 7.1 g/L butanol and 11.2 g/L ABE could be produced after 72 h fermentation for the hydrolyzate obtained from enzymatic hydrolysis with 6 % solid loading. This is comparable to the glucose and simulated hydrozate medium, and the overall ABE yield could reach 0.112 g/g raw corn stover.     

Metabolic engineering of Clostridium acetobutylicum for enhanced production of butyric acid

Clostridium acetobutylicum has been considered as an attractive platform host for biorefinery due to its metabolic diversity. Considering its capability to overproduce butanol through butyrate, it was thought that butyric acid can also be efficiently produced by this bacterium through metabolic engineering. The pta-ctfB-deficient C. acetobutylicum CEKW, in which genes encoding phosphotransacetylase and CoA-transferase were knocked out, was assessed for its potential as a butyric acid producer in fermentations with four controlled pH values at 5.0, 5.5, 6.0, and 6.4. Butyric acid could be best produced by fermentation of the CEKW at pH 6.0, resulting in the highest titer of 26.6 g/l, which is 6.4 times higher than that obtained with the wild type. However, due to the remaining solventogenic ability of the CEKW, 3.6 g/l solvents were also produced. Thus, the CEKW was further engineered by knocking out the adhE1-encoding aldehyde/alcohol dehydrogenase to prevent solvent production. Batch fermentation of the resulting C. acetobutylicum HCEKW at pH 6.0 showed increased butyric acid production to 30.8 g/l with a ratio of butyric-to-acetic acid (BA/AA) of 6.6 g/g and a productivity of 0.72 g/l/h from 86.9 g/l glucose, while negligible solvent (0.8 g/l ethanol only) was produced. The butyric acid titer, BA/AA ratio, and productivity obtained in this study were the highest values reported for C. acetobutylicum, and the BA/AA ratio and productivity were also comparable to those of native butyric acid producer Clostridium tyrobutyricum. These results suggested that the simultaneous deletion of the pta-ctfB-adhE1 in C. acetobutylicum resulted in metabolic switch from biphasic to acidogenic fermentation, which enhanced butyric acid production.     

Continuous acetone-butanol-ethanol fermentation using SO2-ethanol-water spent liquor from spruce

SO₂–ethanol–water (SEW) spent liquor from spruce chips was successfully used for batch and continuous production of acetone, butanol and ethanol (ABE). Initially, batch experiments were performed using spent liquor to check the suitability for production of ABE. Maximum concentration of total ABE was found to be 8.79 g/l using 4-fold diluted SEW liquor supplemented with 35 g/l of glucose. The effect of dilution rate on solvent production, productivity and yield was studied in column reactor consisting of immobilized Clostridium acetobutylicum DSM 792 on wood pulp. Total solvent concentration of 12 g/l was obtained at a dilution rate of 0.21 h⁻¹. The maximum solvent productivity (4.86 g/l h) with yield of 0.27 g/g was obtained at dilution rate of 0.64 h⁻¹. Further, to increase the solvent yield, the unutilized sugars were subjected to batch fermentation.     

Carbon monoxide gasing leads to alcohol production and butyrate uptake without acetone formation in continuous cultures ofClostridium acetobutylicum

Summary When continuous, steady-state, glucose-limited cultures ofClostridium acetobutylicum were sparged with CO, the completely or almost completely acidogenic fermentations became solventogenic. Alcohol (butanol and ethanol) and lactate production at very high specific production rates were initiated and sustained without acetone, and little or no acetate and butyrate formation. In one fermentation, strong butyrate uptake without acetone formation was observed. Growth could be sustained even with 100% inhibition of H₂ formation. Although CO gasing inhibited growth up to 50%, and H₂ formation up to 100%, it enhanced the rate of glucose uptake up to 300%. TheY _ATP was strongly affected and mostly reduced with respect to its steady-state value. The results support the hypothesis that solvent formation is triggered by an altered electron flow.     

Switching Clostridium acetobutylicum to an ethanol producer by disruption of the butyrate/butanol fermentative pathway

Solventogenic clostridia are well-known since almost a century due to their unique capability to biosynthesize the solvents acetone and butanol. Based on recently developed genetic engineering tools, a targeted 3-hydroxybutyryl-CoA dehydrogenase (Hbd)-negative mutant of Clostridium acetobutylicum was generated. Interestingly, the entire butyrate/butanol (C₄) metabolic pathway of C. acetobutylicum could be inactivated without a severe growth limitation and indicated the general feasibility to manipulate the central fermentative metabolism for product pattern alteration. Cell extracts of the mutant C. acetobutylicum hbd::int(69) revealed clearly reduced thiolase, Hbd and crotonase but increased NADH-dependent alcohol dehydrogenase enzyme activities as compared to the wildtype strain. Neither butyrate nor butanol were detected in cultures of C. acetobutylicum hbd::int(69), and the formation of molecular hydrogen was significantly reduced. Instead up to 16 and 20 g/l ethanol were produced in glucose and xylose batch cultures, respectively. Further sugar addition in glucose fed-batch fermentations increased the ethanol production to a final titer of 33 g/l, resulting in an ethanol to glucose yield of 0.38 g/g.     

Metabolic engineering of Clostridium acetobutylicum for the enhanced production of isopropanol‐butanol‐ethanol fuel mixture

Butanol is considered as a superior biofuel, which is conventionally produced by clostridial acetone‐butanol‐ethanol (ABE) fermentation. Among ABE, only butanol and ethanol can be used as fuel alternatives. Coproduction of acetone thus causes lower yield of fuel alcohols. Thus, this study aimed at developing an improved Clostridium acetobutylicum strain possessing enhanced fuel alcohol production capability. For this, we previously developed a hyper ABE producing BKM19 strain was further engineered to convert acetone into isopropanol. The BKM19 strain was transformed with the plasmid pIPA100 containing the sadh (primary/secondary alcohol dehydrogenase) and hydG (putative electron transfer protein) genes from the Clostridium beijerinckii NRRL B593 cloned under the control of the thiolase promoter. The resulting BKM19 (pIPA100) strain produced 27.9 g/l isopropanol‐butanol‐ethanol (IBE) as a fuel alcohols with negligible amount of acetone (0.4 g/l) from 97.8 g/l glucose in lab‐scale (2 l) batch fermentation. Thus, this metabolically engineered strain was able to produce 99% of total solvent produced as fuel alcohols. The scalability and stability of BKM19 (pIPA100) were evaluated at 200 l pilot‐scale fermentation, which showed that the fuel alcohol yield could be improved to 0.37 g/g as compared to 0.29 g/g obtained at lab‐scale fermentation, while attaining a similar titer. To the best of our knowledge, this is the highest titer of IBE achieved and the first report on the large scale fermentation of C. acetobutylicum for IBE production. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1083–1088, 2013