Interaction between chitosan and bovine lung extract surfactants

The interaction between a cationic polyelectrolyte, chitosan, and an exogenous bovine lung extract surfactant (BLES) was studied using dynamic compression/expansion cycles of dilute BLES preparations in a Constrained Sessile Drop (CSD) device equipped with an environmental chamber conditioned at 37 degrees C and 100% R.H. air. Under these conditions, dilute BLES preparations tend to produce variable and relatively high minimum surface tensions. Upon addition of "low" chitosan to BLES ratios, the minimum surface tension of BLES-chitosan preparations were consistently low (i.e. <5 mJ/m2), and the resulting surfactant monolayers (adsorbed at the air-water interface) were highly elastic and stable. However, the use of "high" chitosan to BLES ratios induced the collapse of the surfactant monolayer at high minimum surface tensions (i.e. >15 mJ/m2). The zeta potential of the lung surfactant aggregates in the subphase suggests that chitosan binds to the anionic lipids (phosphatidyl glycerols) in BLES, and that this binding is ultimately responsible for the changes in the surface activity (elasticity and stability) of these surfactant-polyelectrolyte mixtures. Furthermore the transition from "low" to "high" chitosan to BLES ratios correlates with the flocculation and de-flocculation of surfactant aggregates in the subphase. It is proposed that the aggregation/segregation of "patches" of anionic lipids in the surfactant monolayer produced at different chitosan to BLES ratios explains the enhancing/inhibitory effects of chitosan. These observations highlight the importance of electrostatic interactions in lung surfactant systems.     

Restoring the activity of serum-inhibited bovine lung extract surfactant (BLES) using cationic additives

In this work four cationic additives were used to improve the surface activity of lung surfactants, particularly in the presence of bovine serum that was used as a model surfactant inhibitor. Two of those additives were chitosan in its soluble hydrochloride form with average molecular weights of 113 kDa and 213 kDa. The other two additives were cationic peptides, polylysine 50 kDa and polymyxin B. These additives were added to bovine lipid extract surfactant (BLES) and the optimal additive-surfactant ratio was determined based on the minimum surface tension upon dynamic compression, carried out in a constrained sessile drop (CSD) device in the presence of 50 μl/ml serum. At the optimal ratio all the BLES-additive mixtures were able to achieve desirable minimum surface tensions. The optimal additive-surfactant ratios for the chitosan chlorides are consistent with a previously proposed patch model for the binding of the anionic lipids in BLES to the positive charges in chitosan. For the peptides, the optimal binding ratios were consistent with ratios established previously for the binding of these peptides to monolayers of anionic lipids. The optimal formulation containing these peptides were able to reach low minimum surface tension in systems containing 500 μl/ml of serum, matching the effectiveness of a lung surfactant extract that had not undergone post-separation processes and therefore contained all its proteins and lipids (complete lung surfactant).     

Restoring the charge and surface activity of bovine lung extract surfactants with cationic and anionic polysaccharides

Chitosan, a cationic polysaccharide, has been found to improve the surface activity of lung surfactant extracts in the presence of various inhibitors. It has been proposed that chitosan binds to anionic lipids (e.g. phosphatidyl glycerols) in lung surfactants, producing stable lipid films at the air-water interface. This binding also reverses the net charge of the surfactant aggregates, from negative to positive. Unfortunately, positively charged aggregates may adsorb or interact with the negatively charged epithelial tissue, leading to poor surfactant performance. To address this issue an anionic polysaccharide, dextran sulfate (dexS), was used as a secondary coating to reverse the charge of chitosan-lung surfactant extracts without affecting the surface activity of the preparation. The dynamic surface tension and zeta potential of bovine lipid extract surfactant (BLES) containing chitosan chloride (chiCl) and dexS were evaluated as a function of dexS concentration. These studies were conducted in the absence and presence of sodium bicarbonate buffer, and in the absence and presence of bovine serum used as model inhibitor. It was determined that using an appropriate concentration of dexS, especially at physiological pH, it is possible to restore the negative charge of the surfactant aggregates, and retain their surface activity, even in the presence of bovine serum. High concentrations of dexS affect the binding of chiCl to BLES, and the surface activity of the preparation.     

Effect of budesonide and salbutamol on surfactant properties.

The objective of this study was to evaluate the in vitro effect of budesonide and salbutamol on the surfactant biophysical properties. The surface-tension properties of two bovine lipid extracts [bovine lipid extract surfactant (BLES) and Survanta] and a rat lung lavage natural surfactant were evaluated in vitro by the captive bubble surfactometer. Measurements were obtained before and after the addition of a low and high concentration of budesonide and salbutamol. Whereas salbutamol had no significant effect, budesonide markedly reduced the surface-tension-lowering properties of all surfactant preparations. Surfactant adsorption (decrease in surface tension vs. time) was significantly reduced (P < 0.01) at a high budesonide concentration with BLES, both concentrations with Survanta, and a low concentration with natural surfactant. At both concentrations, budesonide reduced (P < 0.01) Survanta film stability (minimal surface vs. time at minimum bubble volume), whereas no changes were seen with BLES. The minimal surface tension obtained for all surfactant preparations was significantly higher (P < 0.01), and the percentage of film area compression required to reach minimum surface tension was significantly lower after the addition of budesonide. In conclusion, budesonide, at concentrations used therapeutically, adversely affects the surface-tension-lowering properties of surfactant. We speculate that it may have the same adverse effect on the human surfactant.     

Effect of humidity on the stability of lung surfactant films adsorbed at air-water interfaces

The effect of humidity on the film stability of Bovine Lipid Extract Surfactant (BLES) is studied using the captive bubble method. It is found that adsorbed BLES films show distinctly different stability patterns at two extreme relative humidities (RHs), i.e., bubbles formed by ambient air and by air prehumidified to 100% RH at 37 °C. The differences are illustrated by the ability to maintain low surface tensions at various compression ratios, the behavior of bubble clicks, and film compressibility. These results suggest that 100% RH at 37 °C tends to destabilize the BLES films. In turn, the experimental results indicate that the rapidly adsorbed BLES film on a captive bubble presents a barrier to water transport that retards full humidification of the bubble when ambient air is used for bubble formation. These findings necessitate careful evaluation and maintenance of environmental humidity for all in vitro assessment of lung surfactants. It is also found that the stability of adsorbed bovine natural lung surfactant (NLS) films is not as sensitive as BLES films to high humidity. This may indicate a physiological function of SP-A and/or cholesterol, which are absent in BLES, in maintaining the extraordinary film stability in vivo.     

Influence of surface chemistry and topography of particles on their immersion into the lung's surface-lining layer.

Inhaled and deposited spherical particles, 1-6 micrometer in diameter and of differing surface chemistry and topography, were studied in hamster intrapulmonary conducting airways and alveoli by electron microscopy. Polystyrene and Teflon particles, as well as puffball spores, were found submersed in the aqueous lining layer and adjacent to epithelial cells. The extent of particle immersion promoted by a surfactant film was assessed in a "floating-drop-surface balance" by light microscopy. Teflon and polystyrene spheres were immersed into the subphase by 50-60% at film surface tensions of 25 and 30 mJ/m(2), respectively, and totally submersed at 15 and 25 mJ/m(2), respectively. Puffball spores were immersed by approximately 50% at 22 mJ/m(2) and totally submersed at film surface tensions of 相似文献   

Physiological and inflammatory response to instillation of an oxidized surfactant in a rat model of surfactant deficiency.

Pulmonary surfactant is a mixture of phospholipids ( approximately 90%) and surfactant-associated proteins (SPs) ( approximately 10%) that stabilize the lung by reducing the surface tension. One proposed mechanism by which surfactant is altered during acute lung injury is via direct oxidative damage to surfactant. In vitro studies have revealed that the surface activity of oxidized surfactant was impaired and that this effect could be overcome by adding SP-A. On the basis of this information, we hypothesized that animals receiving oxidized surfactant preparations would exhibit an inferior physiological and inflammatory response and that the addition of SP-A to the oxidized preparations would ameliorate this response. To test this hypothesis, mechanically ventilated, surfactant-deficient rats were administered either bovine lipid extract surfactant (BLES) or in vitro oxidized BLES of three doses: 10 mg/kg, 50 mg/kg, or 10 mg/kg + SP-A. When instilled with 10 mg/kg normal surfactant, the rats had a significantly superior arterial Po2 responses compared with the rats receiving oxidized surfactant. Interestingly, increasing the dose five times mitigated this physiological effect, and the addition of SP-A to the surfactant preparation had little impact on improving oxygenation. There were no differences in alveolar surfactant pools and the indexes of pulmonary inflammation between the 10 mg/kg dose groups, nor was there any differences observed between either of the groups supplemented with SP-A. However, there was significantly more surfactant and more inflammatory cytokines in the 50 mg/kg oxidized BLES group compared with the 50 mg/kg BLES group. We conclude that instillation of an in vitro oxidized surfactant causes an inferior physiological response in a surfactant-deficient rat.     

Constrained sessile drop as a new configuration to measure low surface tension in lung surfactant systems.

Existing methodology for surface tension measurements based on drop shapes suffers from the shortcoming that it is not capable to function at very low surface tension if the liquid dispersion is opaque, such as therapeutic lung surfactants at clinically relevant concentrations. The novel configuration proposed here removes the two big restrictions, i.e., the film leakage problem that is encountered with such methods as the pulsating bubble surfactometer as well as the pendant drop arrangement, and the problem of the opaqueness of the liquid, as in the original captive bubble arrangement. A sharp knife edge is the key design feature in the constrained sessile drop that avoids film leakage at low surface tension. The use of the constrained sessile drop configuration in conjunction with axisymmetric drop shape analysis to measure surface tension allows complete automation of the setup. Dynamic studies with lung surfactant can be performed readily by changing the volume of a sessile drop, and thus the surface area, by means of a motor-driven syringe. To illustrate the validity of using this configuration, experiments were performed using an exogenous lung surfactant preparation, bovine lipid extract surfactant (BLES) at 5.0 mg/ml. A comparison of results obtained for BLES at low concentration between the constrained sessile drop and captive bubble arrangement shows excellent agreement between the two approaches. When the surface area of the BLES film (0.5 mg/ml) was compressed by about the same amount in both systems, the minimum surface tensions attained were identical within the 95% confidence limits.     

Effect of humidity on the stability of lung surfactant films adsorbed at air-water interfaces

The effect of humidity on the film stability of Bovine Lipid Extract Surfactant (BLES) is studied using the captive bubble method. It is found that adsorbed BLES films show distinctly different stability patterns at two extreme relative humidities (RHs), i.e., bubbles formed by ambient air and by air prehumidified to 100% RH at 37 degrees C. The differences are illustrated by the ability to maintain low surface tensions at various compression ratios, the behavior of bubble clicks, and film compressibility. These results suggest that 100% RH at 37 degrees C tends to destabilize the BLES films. In turn, the experimental results indicate that the rapidly adsorbed BLES film on a captive bubble presents a barrier to water transport that retards full humidification of the bubble when ambient air is used for bubble formation. These findings necessitate careful evaluation and maintenance of environmental humidity for all in vitro assessment of lung surfactants. It is also found that the stability of adsorbed bovine natural lung surfactant (NLS) films is not as sensitive as BLES films to high humidity. This may indicate a physiological function of SP-A and/or cholesterol, which are absent in BLES, in maintaining the extraordinary film stability in vivo.     

Electrostatic barrier to recovery of dipalmitoylphosphatidylglycerol monolayers after collapse

The reincorporation of lipids into monolayers at the air-water interface after collapse is important to the maintenance of low surface tensions on subsequent expansion and compression cycles. For single component, anionic dipalmitoylphosphatidylglycerol monolayers, the fraction of recovered lipid is proportional to the subphase ionic strength. The collapse mechanism and structure of the collapsed materials appear unchanged with ionic strength. A simple electrostatic barrier model shows that the fractional recovery depends exponentially on the Debye length; this is verified by experiment. This simple model suggests possible catalytic roles for the cationic lung surfactant specific proteins SP-B and SP-C that induce structural changes in the monolayer that may act as charge-neutralizing docking sites for surfactant in the subphase, leading to faster and more efficient recovery.     

Effect of surfactant concentration, compression ratio and compression rate on the surface activity and dynamic properties of a lung surfactant

This paper reports dynamic surface tension experiments of a lung surfactant preparation, BLES, for a wide range of concentrations, compression ratios and compression rates. These experiments were performed using Axisymmetric Drop Shape Analysis-Constrained Sessile Drop (ADSA-CSD). The main purpose of the paper is to interpret the results in terms of physical parameters using the recently developed Compression-Relaxation Model (CRM). In the past, only the minimum surface tension was used generally for the characterization of lung surfactant films; however, this minimum value is not a physical parameter and depends on the compression protocol. CRM is based on the assumption that the dynamic surface tension response is governed by surface elasticities, adsorption and desorption of components of the lung surfactant. The ability of CRM to fit the surface tension response closely for a wide variety of parameters (compression ratio, compression rate and surfactant concentration) and produce sensible values for the elastic and kinetic parameters supports the validity of CRM.     

Effect of the hydrophobic surfactant proteins on the surface activity of spread films in the captive bubble surfactometer

The main function of pulmonary surfactant, a mixture of lipids and proteins, is to reduce the surface tension at the air/liquid interface of the lung. The hydrophobic surfactant proteins SP-B and SP-C are required for this process. When testing their activity in spread films in a captive bubble surfactometer, both SP-B and SP-C showed concentration dependence for lipid insertion as well as for lipid film refinement. Higher activity in DPPC refinement of the monolayer was observed for SP-B compared with SP-C. Further differences between both proteins were found, when subphase phospholipid vesicles, able to create a monolayer-attached lipid reservoir, were omitted. SP-C containing monolayers showed gradually increasing minimum surface tensions upon cycling, indicating that a lipid reservoir is required to prevent loss of material from the monolayer. Despite reversible cycling dynamics, SP-B containing monolayers failed to reach near-zero minimum surface tensions, indicating that the reservoir is required for stable films.     

Accumulation of cadmium in near-isogenic lines of durum wheat (Triticum turgidum L. var durum): the role of transpiration

Concentrations of cadmium in the grain of durum wheat (Triticum turgidum L. var durum) are often above the internationally acceptable limit of 0.2 mg kg⁻¹. Cultivars that vary in concentrations of cadmium in the grain have been identified but the physiology behind differential accumulation has not been determined. Three pairs of near-isogenic lines (isolines) of durum wheat that vary in aboveground cadmium accumulation (8982-TL ‘high’ and ‘low’, W9260-BC ‘high’ and ‘low’, and W9261-BG ‘high’ and ‘low’) were used to test the hypothesis that the greater amounts of cadmium in shoots of the ‘high’ isolines are correlated with greater volumes of water transpired. In general, cadmium content was positively correlated with transpiration only in the ‘low’ isolines. Although shoots of the ‘high’ isolines of W9260-BC and W9261-BG contained higher concentrations of cadmium than did their corresponding ‘low’ isolines, they did not transpire larger volumes of water. In addition, isolines of 8982-TL transpired less water than did the other pairs of isolines yet both ‘high’ and ‘low’ isolines of 8982-TL contained higher amounts of cadmium than did the other pairs. The difference between ‘high’ and ‘low’ isolines appears to be related to the relative contribution of transpiration to cadmium translocation to the shoot. Increased transpiration was associated with increased cadmium content in the ‘low’ isolines but in the ‘high’ isolines increased cadmium in the shoot occurred independently of the volume of water transpired.     

Atomic force microscopy studies of functional and dysfunctional pulmonary surfactant films, II: albumin-inhibited pulmonary surfactant films and the effect of SP-A

Pulmonary surfactant (PS) dysfunction because of the leakage of serum proteins into the alveolar space could be an operative pathogenesis in acute respiratory distress syndrome. Albumin-inhibited PS is a commonly used in vitro model for studying surfactant abnormality in acute respiratory distress syndrome. However, the mechanism by which PS is inhibited by albumin remains controversial. This study investigated the film organization of albumin-inhibited bovine lipid extract surfactant (BLES) with and without surfactant protein A (SP-A), using atomic force microscopy. The BLES and albumin (1:4 w/w) were cospread at an air-water interface from aqueous media. Cospreading minimized the adsorption barrier for phospholipid vesicles imposed by preadsorbed albumin molecules, i.e., inhibition because of competitive adsorption. Atomic force microscopy revealed distinct variations in film organization, persisting up to 40 mN/m, compared with pure BLES monolayers. Fluorescence confocal microscopy confirmed that albumin remained within the liquid-expanded phase of the monolayer at surface pressures higher than the equilibrium surface pressure of albumin. The remaining albumin mixed with the BLES monolayer so as to increase film compressibility. Such an inhibitory effect could not be relieved by repeated compression-expansion cycles or by adding surfactant protein A. These experimental data indicate a new mechanism of surfactant inhibition by serum proteins, complementing the traditional competitive adsorption mechanism.     

Calcium Ions as “Miscibility Switch”: Colocalization of Surfactant Protein B with Anionic Lipids under Absolute Calcium Free Conditions

One of the main determinants of lung surfactant function is the complex interplay between its protein and lipid components. The lipid specificity of surfactant protein B (SP-B), however, and the protein's ability to selectively squeeze out lipids, has remained contradictory. In this work we present, for the first time to our knowledge, by means of time-of-flight secondary ion mass spectrometry chemical imaging, a direct evidence for colocalization of SP-B as well as its model peptide KL₄ with negatively charged dipalmitoylphosphatidylglycerol under absolute calcium free conditions. Our results prove that protein/lipid localization depends on the miscibility of all surfactant components, which itself is influenced by subphase ionic conditions. In contrast to our earlier studies reporting SP-B/KL₄ colocalization with zwitterionic dipalmitoylphosphatidylcholine, in the presence of even the smallest traces of calcium, we finally evidence an apparent reversal of protein/lipid mixing behavior upon calcium removal with ethylene diamine tetraacetic acid. In addition, scanning force microscopy measurements reveal that by depleting the subphase from calcium ions the protrusion formation ability of SP-B or KL₄ is not hampered. However, in the case of KL₄, distinct differences in protrusion morphology and height are visible. Our results support the idea that calcium ions act as a “miscibility switch” in surfactant model systems and probably are one of the major factors steering lipid/protein mixing behavior as well as influencing the protein's protrusion formation ability.     

The Effect of a C-Terminal Peptide of Surfactant Protein B (SP-B) on Oriented Lipid Bilayers, Characterized by Solid-State H- and P-NMR

SP-B_CTERM, a cationic, helical peptide based on the essential lung surfactant protein B (SP-B), retains a significant fraction of the function of the full-length protein. Solid-state ²H- and ³¹P-NMR were used to examine the effects of SP-B_CTERM on mechanically oriented lipid bilayer samples. SP-B_CTERM modified the multilayer structure of bilayers composed of POPC, POPG, POPC/POPG, or bovine lipid extract surfactant (BLES), even at relatively low peptide concentrations. The ³¹P spectra of BLES, which contains ∼1% SP-B, and POPC/POPG with 1% SP-B_CTERM, look very similar, supporting a similarity in lipid interactions of SP-B_CTERM and its parent protein, full-length SP-B. In the model systems, although the peptide interacted with both the oriented and unoriented fractions of the lipids, it interacted differently with the two fractions, as demonstrated by differences in lipid headgroup structure induced by the peptide. On the other hand, although SP-B_CTERM induced similar disruptions in overall bilayer orientation in BLES, there was no evidence of lipid headgroup conformational changes in either the oriented or the unoriented fractions of the BLES samples. Notably, in the model lipid systems the peptide did not induce the formation of small, rapidly tumbling lipid structures, such as micelles, or of hexagonal phases, the observation of which would have provided support for functional mechanisms involving peptide-induced lipid flip-flop or stabilization of curved lipid structures, respectively.     

Surface tension measurements on filamentous broths

Summary The surface tension of microorganisms is an important parameter in biotechnological processes. In this work contact angles and surface tensions were determined for filamentous micro-organisms Streptomyces levoris and Aspergillus niger. The contact angles were 39.7° and 43.1°, and the surface tensions 59.0 mJ/m² and 57.3 mJ/m², respectively. The contact angles for the filamentous broths were measured with the axisymmetric drop shape analysis - contact diameter (ADSA-CD) method which is particularly well suited to rough surfaces. The contact angle results obtained were significantly larger than those earlier reported for bacteria.Visiting scientist from Helsinki University of Technology, Espoo, Finland.     

Distinct steps in the adsorption of pulmonary surfactant to an air-liquid interface

To investigate the mechanisms by which vesicles of pulmonary surfactant adsorb to an air-liquid interface, we measured the effect of different phospholipids and of their concentration both in the subphase and at the interface on this process. Adsorbing vesicles contained the hydrophobic surfactant proteins mixed with the following four sets of surfactant phospholipids that varied the content of anionic headgroups and mixed acyl chains independently: the complete set of purified phospholipids (PPL) from calf surfactant; modified PPL (mPPL) from which the anionic phospholipids were removed; a mixture of dipalmitoyl phosphatidylcholine (DPPC) and dipalmitoyl phosphatidylglycerol (DPPG) (9:1, mol:mol); and DPPC alone. The initial reduction in surface tension depended strongly on the anionic phospholipids and the subphase concentration. The acyl groups had no effect. Adsorption beyond the initial stage depended more on the mixed acyl groups, became increasingly independent of subphase concentration, and was determined instead by the interfacial concentration of the surface film. The different constituents produced the same effects in vesicles adsorbing to a clean interface or in a preexisting film to which vesicles of SP:DPPC adsorbed. Adsorption for vesicles of SP:PPL adsorbing to DPPC or of SP:DPPC to PPL above a certain threshold surface concentration followed exactly the same isotherm. Our results fit best with a two-step model for adsorption. The anionic phospholipids first promote the initial juxtaposition of vesicles to the interface. Compounds with mixed acyl constituents at the point of contact between vesicle and interface then facilitate fusion with the surface.     

A modified squeeze-out mechanism for generating high surface pressures with pulmonary surfactant

The exact mechanism by which pulmonary surfactant films reach the very low surface tensions required to stabilize the alveoli at end expiration remains uncertain. We utilized the nanoscale sensitivity of atomic force microscopy (AFM) to examine phospholipid (PL) phase transition and multilayer formation for two Langmuir-Blodgett (LB) systems: a simple 3 PL surfactant-like mixture and the more complex bovine lipid extract surfactant (BLES). AFM height images demonstrated that both systems develop two types of liquid condensed (LC) domains (micro- and nano-sized) within a liquid expanded phase (LE). The 3 PL mixture failed to form significant multilayers at high surface pressure (π while BLES forms an extensive network of multilayer structures containing up to three bilayers. A close examination of the progression of multilayer formation reveals that multilayers start to form at the edge of the solid-like LC domains and also in the fluid-like LE phase. We used the elemental analysis capability of time-of-flight secondary ion mass spectrometry (ToF-SIMS) to show that multilayer structures are enriched in unsaturated PLs while the saturated PLs are concentrated in the remaining interfacial monolayer. This supports a modified squeeze-out model where film compression results in the hydrophobic surfactant protein-dependent formation of unsaturated PL-rich multilayers which remain functionally associated with a monolayer enriched in disaturated PL species. This allows the surface film to attain low surface tensions during compression and maintain values near equilibrium during expansion.     

Disparate effects of two phosphatidylcholine binding proteins, C-reactive protein and surfactant protein A, on pulmonary surfactant structure and function

C-reactive protein (CRP) and surfactant protein A (SP-A) are phosphatidylcholine (PC) binding proteins that function in the innate host defense system. We examined the effects of CRP and SP-A on the surface activity of bovine lipid extract surfactant (BLES), a clinically applied modified natural surfactant. CRP inhibited BLES adsorption to form a surface-active film and the film's ability to lower surface tension (gamma) to low values near 0 mN/m during surface area reduction. The inhibitory effects of CRP were reversed by phosphorylcholine, a water-soluble CRP ligand. SP-A enhanced BLES adsorption and its ability to lower gamma to low values. Small amounts of SP-A blocked the inhibitory effects of CRP. Electron microscopy showed CRP has little effect on the lipid structure of BLES. SP-A altered BLES multilamellar vesicular structure by generating large, loose bilayer structures that were separated by a fuzzy amorphous material, likely SP-A. These studies indicate that although SP-A and CRP both bind PC, there is a difference in the manner in which they interact with surface films.