生物被膜的形成及其电化学阻抗检测

生物被膜是细菌及其自身分泌的胞外聚合物组成的微生物群落,其形成是受多种机制共同调控的多阶段动态过程,具有较强的耐药性且难以清除,给医疗、食品等行业带来了巨大的威胁。近年来,生物被膜的相关研究领域备受关注,尤其是针对生物被膜的有效检测技术。本文在简要介绍生物被膜的特点、形成过程及群感效应对生物被膜的调控作用基础之上,总结了生物被膜常用的检测方法,重点针对电化学阻抗技术在生物被膜检测中的应用进行调研和讨论,并对基于微流控芯片的生物被膜电化学阻抗原位检测进行了综述和展望。     

Microbial degradation of polymeric coatings measured by electrochemical impedance spectroscopy

This paper reports results of biodegradation studies of polyimide coatings exposed to a mixed fungal culture using electrochemical impedance spectroscopy (EIS). The fungal consortium was originally isolated from degraded polyimides and identified species include Aspergillus versicolor, Cladosporium cladosporioides, and a Chaetomium species. Actively growing fungi on polyimides yield distinctive EIS spectra through time, indicative of failure of the polymer integrity compared to the uninoculated controls. An initial decline in coating resistance was related to the partial ingress of water molecules and ionic species into the polymeric matrices. This was followed by further degradation of the polymers by activity of the fungi. The relationship between the changes in impedance spectra and microbial degradation of the coatings was further supported by scanning electron microscopy, showing extensive colonization of the polyimide surfaces by the fungi. Our data indicate that EIS can be a sensitive and informative technique for evaluating the biosusceptibility of polymers and coatings.     

Improving the biological activity of the antimicrobial peptide anoplin by membrane anchoring through a lipophilic amino acid derivative

The lipophilic amino acid, (S)-2-aminoundecanoic acid, was synthesized and incorporated at a number of specific positions within the peptide sequence of anoplin. These lipophilic anoplin analogs showed to be more active against Escherichia coli and Staphylococcus aureus compared to native anoplin, while the EC₅₀-value of hemolysis was at least one order of magnitude lower than the MIC values. This was in sharp contrast to the N-acylated anoplin derivative, where a gain in activity also led to a complete loss of selectivity. Thus, the incorporation of a lipophilic amino acid residue into anoplin enhanced the antimicrobial activity, while selectivity towards microbial membranes was retained.     

Spectroscopic investigations of the binding mechanisms between antimicrobial peptides and membrane models of Pseudomonas aeruginosa and Klebsiella pneumoniae

CD spectroscopy was used to investigate the interactions of a series of synthetic AMPs with LPS isolated from Pseudomonas aeruginosa and Klebsiella pneumoniae, as well as with various phospholipids to better approximate the chemical composition of the membranes of these two strains of Gram-negative bacteria. This investigation was conducted in order to probe how the contributions of key physicochemical properties of an AMP vary in different regions of the membranes of these two bacteria. The conclusions from this study are as follows. (1) The binding interactions between the AMP and the membranes are defined by the complementarity of delocalization of positive charge density of the basic amino side chains (i.e., electrostatics), molecular flexibility of the peptide backbone, and overall hydrophobicity. (2) The binding interactions of these AMPs to LPS seem to be predominantly with the lipid A region of the LPS. (3) Incorporation of phospholipids into the LPS containing SUVs resulted in dramatic changes in the conformational equilibrium of the bound AMPs. (4) For the LPS-phospholipid models of Pseudomonas aeruginosa, delocalization of the side chain positive charge plays a major role in determining the number of conformers that contribute to the binding conformational equilibrium. This relationship was not observed for the models of the outer and inner membranes of Klebsiella pneumoniae.     

Characterization of the solubilization of lipid bilayers by surfactants

This communication addresses the state of aggregation of lipid-detergent mixed dispersions. Analysis of recently published data suggest that for any given detergent-lipid mixture the most important factor in determining the type of aggregates (mixed vesicles or mixed micelles) and the size of the aggregate is the detergent to lipid molar ratio in these aggregates, herein denoted the effective ratio, R_e. For mixed bilayers this effective ratio has been previously shown to be a function of the lipid and detergent concentrations and of an equilibrium partition coefficient, K, which describes the distribution of the detergent between the bilayers and the aqueous phase. We show that, similar to mixed bilayers, the size of mixed micelles is also a function of the effective ratio, but for these dispersions the distribution of detergent between the mixed micelles and the aqueous medium obeys a much higher partition coefficient. In practical terms, the detergent concentration in the mixed micelles is equal to the difference between the total detergent concentration and the critical micelle concentration (cmc). Thus, the effective ratio is equal to this difference divided by the lipid concentration. Transformation of mixed bilayers to mixed micelles, commonly denoted solubilization, occurs when the surfactant to lipid effective ratio reaches a critical value. Experimental evaluation of this critical ratio can be based on the linear dependence of detergent concentration, required for solubilization, on the lipid concentration. According to the ‘equilibrium partition model’, the dependence of the ‘solubilizing detergent concentration’ on the lipid concentration intersects with the lipid axis at −1/K, while the slope of this dependence is the critical effective ratio. On the other hand, assuming that when solubilization occurs the detergent concentration in the aqueous phase is approximately equal to the critical micelle concentration, implies that the above dependence intersects with the detergent axis at the critical micelle concentration, while its slope, again, is equal to the critical effective ratio. Analysis of existing data suggests that within experimental error both these distinctively different approaches are valid, indicating that the critical effective ratio at which solubilization occurs is approximately equal to the product of the critical micelle concentration and the distribution coefficient K. Since the nature of detergent affects K and the critical micelle concentration in opposite directions, the critical (‘solubilizing’) effective ratio depends upon the nature of detergent less than any of these two factors.     

Continuous flow system for biofilm formation using controlled concentrations of Pseudomonas putida from chicken carcass and coupled to electrochemical impedance detection

Abstract

Most studies dealing with monitoring the dynamics of biofilm formation use microbial suspensions at high concentrations. These conditions do not always represent food or water distribution systems. A continuous flow system capable of controlling the concentration of the microbial suspension stream from 10⁴ to 10⁶ CFU ml^?1 is reported. Pseudomonas putida biofilms formed using 100-fold, 1,000-fold or 10,000-fold diluted bacterial suspensions were monitored in-line by electrochemical impedance spectroscopy (EIS) and total plate counts. Randles equivalent circuit model and a modified Randles model with biofilm elements were used to fit the EIS data. In Randles equivalent circuit, the charge transfer resistance decreased as the biofilm formed. The log colony counts of the biofilm correlated to the charge transfer resistance. In the biofilm model, the biofilm resistance and the double layer capacitance decreased as the biofilm formed. The log colony counts of the biofilm correlated to the biofilm resistance.     

Electrochemical impedance spectroscopy for study of aptamer-thrombin interfacial interactions

A simple and highly sensitive electrochemical impedance spectroscopy (EIS) biosensor based on a thrombin-binding aptamer as molecular recognition element was developed for the determination of thrombin. The signal enhancement was achieved by using gold nanoparticles (GNPs), which was electrodeposited onto a glassy carbon electrode (GCE), as a platform for the immobilization of the thiolated aptamer. In the measurement of thrombin, the change in interfacial electron transfer resistance of the biosensor using a redox couple of [Fe(CN)₆]^3−/4− as the probe was monitored. The increase of the electron transfer resistance of the biosensor is linear with the concentration of thrombin in the range from 0.12 nM to 30 nM. The association and dissociation rate constants of the immobilized aptamer–thrombin complex were 6.7 × 10³ M⁻¹ s⁻¹ and 1.0 × 10⁻⁴ s⁻¹, respectively. The association and dissociation constants of three different immobilized aptamers binding with thrombin were measured and the difference of the dissociation constants obtained was discussed. This work demonstrates that GNPs electrodeposited on GCE used as a platform for the immobilization of the thiolated aptamer can improve the sensitivity of an EIS biosensor for the determination of protein. This work also demonstrates that EIS method is an efficient method for the determination of association and dissociation constants on GNPs modified GCE.     

杂合抗菌肽牛乳铁蛋白素-天蚕素在大肠杆菌中的高效表达及其活性鉴定

【目的】菌株耐药性问题日益突出,研制新型安全高效的抗菌药物成为目前的研究热点之一。抗菌肽具有多种优良特性,高活性抗菌肽的开发及其重组表达对解决菌株耐药性问题具有重要意义。【方法】根据牛乳铁蛋白素与天蚕素的结构,设计一种新型的杂合抗菌肽牛乳铁蛋白素-天蚕素(LfcinB-Cecropin),根据Escherichia coli密码子偏爱性合成其编码基因,利用同尾酶法构建含有不同LfcinB-Cecropin基因片段拷贝数的重组表达载体,转化到E.coli BL21(DE3)进行重组表达。【结果】经IPTG诱导,LfcinB-Cecropin融合蛋白成功获得表达。经超声破碎、包涵体纯化、甲酸裂解后,获得具有明显抑菌活性的杂合肽LfcinB-Cecropin。【结论】获得一种高活性的新型抗菌肽LfcinB-Cecropin,并实现了在E.coli中的高效重组表达。     

Grazing incidence X-ray diffraction of highly aligned phospholipid membranes containing the antimicrobial peptide magainin 2

We present the first study of grazing incidence X-ray diffraction on a model system of phospholipid membranes and antimicrobial peptides. For this purpose, highly oriented multilamellar samples have been prepared on solid substrates. By this technique, the short-range order of the lipid chains in the fluid L_α phase can be investigated quantitatively, including not only the mean distance between acyl chains, but also the associated correlation length. The short-range order in lecithin is found to be severely affected by the amphiphilic peptide magainin 2. Received: 7 June 1999 / Revised version: 6 September 1999 / Accepted: 17 September 1999     

Detection of parathyroid hormone using an electrochemical impedance biosensor based on PAMAM dendrimers

This paper presents a novel hormone‐based impedimetric biosensor to determine parathyroid hormone (PTH) level in serum for diagnosis and monitoring treatment of hyperparathyroidism, hypoparathyroidism and thyroid cancer. The interaction between PTH and the biosensor was investigated by an electrochemical method. The biosensor was based on the gold electrode modified by 12‐mercapto dodecanoic (12MDDA). Antiparathyroid hormone (anti‐PTH) was covalently immobilized on to poly amidoamine dendrimer (PAMAM) which was bound to a 1‐ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide/N‐hydroxysuccinimide (EDC/NHS) couple, self‐assembled monolayer structure from one of the other NH₂ sites. The immobilization of anti‐PTH was monitored by electrochemical impedance spectroscopy, cyclic voltammetry and scanning electron microscope techniques. After the optimization studies of immobilization materials such as 12MDDA, EDC–NHS, PAMAM, and glutaraldehyde, the performance of the biosensor was investigated in terms of linearity, sensitivity, repeatability, and reproducibility. PTH was detected within a linear range of 10–60 fg/mL. Finally the described biosensor was used to monitor PTH levels in artificial serum samples. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:815–822, 2015     

Solution structure of termite-derived antimicrobial peptide,spinigerin, as determined in SDS micelle by NMR spectroscopy

Spinigerin is a linear antibacterial peptide derived from a termite insect. It consists of 25 amino acids and is devoid of cysteines. Spinigerin displays good lytic activities against Gram-positive and Gram-negative bacteria, but has no hemolytic activities against human erythrocytes. In this study, we present a three-dimensional solution structure of spinigerin in SDS micelles. According to CD data spinigerin has an alpha-helical conformation in the presence of TFE, DPC micelles, and SDS micelles. The three-dimensional structure of spinigerin as determined by NMR spectroscopy contains a stable alpha-helix from Lys4 to Thr23. Spinigerin (4-21), an 18-residue fragment from Lys4 to Leu21, contains a similar content of alpha-helical structure compared to native spinigerin and was found to retain antibacterial activity, too. Therefore, this alpha-helical structure and the strong electrostatic attraction between four Lys and three Arg residues in spinigerin and the negatively charged polar head groups of the phospholipids on the membrane surface play important roles in disrupting membrane and subsequent cell death.     

Variation in antimicrobial activity of lactoferricin-derived peptides explained by structure modelling

Antimicrobial peptides bovine lactoferricin (LfcinB) and human lactoferricin (LfcinH) are produced from the respective lactoferrin, but are more active than their precursors. Despite sequence homology, the bovine peptide and its derivatives are more active than their human homologs. Such differences between not only the peptides and their precursor but also between the bovine and the human peptides could relate to structural differences. Upon sequence alignment of both peptides with their parental proteins, the structural differences observed between the bovine lactoferrin (BLf) and LfcinB were also found between the human lactoferrin (HLf) and the LfcinH. The helical structures in HLf are replaced by beta-strands separated by a strong turn in LfcinH suggesting an antiparallel beta-sheet structure similar to LfcinB. MIC assays with HLP-2 and BLP-2, 11-residue peptides derived from the active core of both Lfcins, against Escherichia coli, showed that the bovine derivative, BLP-2, is more active than its human homolog HLP-2. Both 3D models for HLP-2 and BLP-2 showed that the beta-strand is centred between the aromatic residues giving both side chains the same orientations. The displacement towards the N-terminus observed for the beta-strand in HLP-2, compared with its central location in BLP-2, could be less favourable to membrane interaction and therefore responsible for the decrease in activity. Such a model suggests for LfcinH a mechanism similar to the one observed for LfcinB, where the absence of long-range interaction, present in lactoferrin, destabilises the first alpha helix, as observed in solution and, upon interaction with the membrane, could result in the formation of a beta-strand, as observed in the presence of LPS. The location of the beta-strand in relation to the positive charges, seems to define the efficiency of the activity of the peptide and may explain the difference in activity obtained between HLP-2 and BLP-2.     

Bilayer lipid composition modulates the activity of dermaseptins, polycationic antimicrobial peptides

The primary targets of defense peptides are plasma membranes, and the induced irreversible depolarization is sufficient to exert antimicrobial activity although secondary modes of action might be at work. Channels or pores underlying membrane permeabilization are usually quite large with single-channel conductances two orders of magnitude higher than those exhibited by physiological channels involved, e.g., in excitability. Accordingly, the ion specificity and selectivity are quite low. Whereas, e.g., peptaibols favor cation transport, polycationic or basic peptides tend to form anion-specific pores. With dermaseptin B2, a 33 residue long and mostly α-helical peptide isolated from the skin of the South American frog Phyllomedusa bicolor, we found that the ion specificity of its pores induced in bilayers is modulated by phospholipid-charged headgroups. This suggests mixed lipid–peptide pore lining instead of the more classical barrel–stave model. Macroscopic conductance is nearly voltage independent, and concentration dependence suggests that the pores are mainly formed by dermaseptin tetramers. The two most probable single-channel events are well resolved at 200 and 500 pS (in 150 mM NaCl) with occasional other equally spaced higher or lower levels. In contrast to previous molecular dynamics previsions, this study demonstrates that dermaseptins are able to form pores, although a related analog (B6) failed to induce any significant conductance. Finally, the model of the pore we present accounts for phospholipid headgroups intercalated between peptide helices lining the pore and for one of the most probable single-channel conductance.     

In vitro electrical impedance spectroscopy of human dentine: the effect of restorative materials

The influence of different restorative materials on in vitro dielectric properties of sound dentine was investigated. The studied samples were three-layer materials consisting of successive disks of dentine and silver amalgam or nanohybrid composite resin. Before being tested, the samples were maintained in physiological solution never more than 48 h from the extraction. Also, sections of intact dentine were similarly prepared for electrical measurements. Complex dielectric permittivity of these specimens was determined in a wide frequency range using the parallel-plate capacitor technique. Very similar dielectric responses of intact dentine and amalgam-dentine material were observed. This is explained on the basis of high dc conductivity exhibited by both samples. In contrast, resin-dentine specimen revealed a much more insulating behavior. A simple theoretical model for heterogeneous systems could be applied to these dental three-layer materials. The dielectric properties of restored dentine are strongly dependent on the kind of restorative material employed in each case. This suggests that electrical data should be used carefully in caries diagnosis on restored teeth.     

Characterization of unique modification of flagellar rod protein FlgG by Campylobacter jejuni lipid A phosphoethanolamine transferase, linking bacterial locomotion and antimicrobial peptide resistance

Gram-negative bacteria assemble complex surface structures that interface with the surrounding environment and are involved in pathogenesis. Recent work in Campylobacter jejuni identified a gene encoding a novel phosphoethanolamine (pEtN) transferase Cj0256, renamed EptC, that serves a dual role in modifying the flagellar rod protein, FlgG, and the lipid A domain of C. jejuni lipooligosaccharide with a pEtN residue. In this work, we characterize the unique post-translational pEtN modification of FlgG using collision-induced and electron transfer dissociation mass spectrometry, as well as a genetic approach using site-directed mutagenesis to determine the site of modification. Specifically, we show that FlgG is modified with pEtN at a single site (Thr(75)) by EptC and demonstrate enzyme specificity by showing that EptC is unable to modify other amino acids (e.g. serine and tyrosine). Using Campylobacter strains expressing site-directed FlgG mutants, we also show that defects in motility arise directly from the loss of pEtN modification of FlgG. Interestingly, alignments of FlgG from most epsilon proteobacteria reveal a conserved site of modification. Characterization of EptC and its enzymatic targets expands on the increasingly important field of prokaryotic post-translational modification of bacterial surface structures and the unidentified role they may play in pathogenesis.     

Application of electrochemical impedance spectroscopy for monitoring allergen-antibody reactions using gold nanoparticle-based biomolecular immobilization method

Gold nanoparticles were used to enhance the immobilization amount and retain the immunoactivity of recombinant dust mite allergen Der f2 immobilized on a glassy carbon electrode (GCE). The interaction between allergen and antibody was studied by electrochemical impedance spectroscopy (EIS). Self-assembled Au colloid layer (?=16nm) deposited on (3-mercaptopropyl)trimethoxysilane (MPTS)-modified GCE offered a basis to control the immobilization of allergen Der f2. The impedance measurements were based on the charge transfer kinetics of the [Fe(CN)(6)](3-/4-) redox pair, compared with bare GCE, the immobilization of allergen Der f2 and the allergen-antibody interaction that occurred on the electrode surface altered the interfacial electron transfer resistance and thereby slowed down the charge transfer kinetics by reducing the active area of the electrode or by preventing the redox species in electrolyte solution from approaching the electrode. The interactions of allergen with various concentrations of monoclonal antibody were also monitored through the change of impedance response. The results showed that the electron transfer resistance increased with increasing concentrations of monoclonal antibody.     

鸡源抗菌肽Fowlicidin-2在大肠杆菌中的 重组表达及其生物学活性鉴定

【目的】对抗菌肽Fowlicidin-2基因进行克隆与表达,并鉴定其生物学活性。【方法】根据抗菌肽Fowlicidin-2氨基酸序列,依照大肠杆菌(E.coli)密码子的偏爱性,人工设计合成其编码基因。与质粒pET-32a连接,构建重组表达载体,转化表达宿主菌E.coliBL21(DE3),IPTG诱导表达,融合蛋白经溴化氰裂解后进行纯化,测定重组抗菌肽的抑菌活性。【结果】Fowlicidin-2融合蛋白以包涵体形式表达,经溴化氰裂解后,成功释放出Fowlicidin-2,获得的重组Fowlicidin-2对革兰氏阳性菌和革兰氏阴性菌均有明显的抑菌效果。【结论】实现了抗菌肽Fowlicidin-2的重组表达,为抗菌肽的重组量化制备提供了理论基础与技术手段。     

Membrane aggregation and perturbation induced by antimicrobial peptide of S-thanatin

Thanatin, a 21-residue peptide, is an inducible insect peptide. In our previous study, we have identified a novel thanatin analog of S-thanatin, which exhibited a broad antimicrobial activity against bacteria and fungi with low hemolytic activity. This study was aimed to delineate the antimicrobial mechanism of S-thanatin and identify its interaction with bacterial membranes. In this study, membrane phospholipid was found to be the target for S-thanatin. In the presence of vesicles, S-thanatin interestingly led to the aggregation of anionic vesicles and sonicated bacteria. Adding S-thanatin to Escherichia coli suspension would result in the collapse of membrane and kill bacteria. The sensitivity assay of protoplast elucidated the importance of outer membrane (OM) for S-thanatin’s antimicrobial activity. Compared with other antimicrobial peptide, S-thanatin produced chaotic membrane morphology and cell debris in electron microscopic appearance. These results supported our hypothesis that S-thanatin bound to negatively charged LPS and anionic lipid, impeded membrane respiration, exhausted the intracellular potential, and released periplasmic material, which led to cell death.     

Investigation of the antimicrobial activity of soy peptides by developing a high throughput drug screening assay

BackgroundAntimicrobial resistance is a great concern in the medical community, as well as food industry. Soy peptides were tested against bacterial biofilms for their antimicrobial activity. A high throughput drug screening assay was developed using microfluidic technology, RAMAN spectroscopy, and optical microscopy for rapid screening of antimicrobials and rapid identification of pathogens.MethodsSynthesized PGTAVFK and IKAFKEATKVDKVVVLWTA soy peptides were tested against Pseudomonas aeruginosa and Listeria monocytogenes using a microdilution assay. Microfluidic technology in combination with Surface Enhanced RAMAN Spectroscopy (SERS) and optical microscopy was used for rapid screening of soy peptides, pathogen identification, and to visualize the impact of selected peptides.ResultsThe PGTAVFK peptide did not significantly affect P. aeruginosa, although it had an inhibitory effect on L. monocytogenes above a concentration of 625 µM. IKAFKEATKVDKVVVLWTA was effective against both P. aeruginosa and L. monocytogenes above a concentration of 37.2 µM. High throughput drug screening assays were able to reduce the screening and bacterial detection time to 4 h. SERS spectra was used to distinguish the two bacterial species.ConclusionsPGTAVFK and IKAFKEATKVDKVVVLWTA soy peptides showed antimicrobial activity against P. aeruginosa and L. monocytogenes. Development of high throughput assays could streamline the drug screening and bacterial detection process.General significanceThe results of this study show that the antimicrobial properties, biocompatibility, and biodegradability of soy peptides could possibly make them an alternative to the ineffective antimicrobials and antibiotics currently used in the food and medical fields. High throughput drug screening assays could help hasten pre-clinical trials in the medical field.     

Effect of physicochemical properties of peptides from soy protein on their antimicrobial activity

Antimicrobial peptides (AMPs) kill microbial cells through insertion and damage/permeabilization of the cytoplasmic cell membranes and has applications in food safety and antibiotic replacement. Soy protein is an attractive, abundant natural source for commercial production of AMPs. In this research, explicit solvent molecular dynamics (MD) simulation was employed to investigate the effects of (i) number of total and net charges, (ii) hydrophobicity (iii) hydrophobic moment and (iv) helicity of peptides from soy protein on their ability to bind to lipid bilayer and their transmembrane aggregates to form pores. Interaction of possible AMP segments from soy protein with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPC/POPG) bilayers, a mimic of bacterial cell membrane, was investigated. Pore formation was insensitive to helicity and occurred for hydrophobicity threshold in the range of −0.3–0 kcal/mol, hydrophobic moment threshold of 0.3 kcal/mol, net charge threshold of 2. Though low hydrophobicity and high number of charges help in the formation of water channel for transmembrane aggregates, insertion of peptides with these properties requires overcome of energy barrier, as shown by potential of mean force calculations, thereby resulting in low antimicrobial activity. Experimental evaluation of antimicrobial activity of these peptides against Gram positive L. monocytogenes and Gram negative E. coli as obtained by spot-on-lawn assay was consistent with simulation results. These results should help in the development of guidelines for selection of peptides with antimicrobial activity based on their physicochemical properties.