High-level production of soluble adenine nucleotide translocator from Schistosoma japonicum in E. coli cell-free system

Adenine nucleotide translocator is an important member of the mitochondrial carrier family, which is involved in the transportation of various metabolites. In the present work, the Escherichia coli cell-free system was chosen as an alternative way to express this highly toxic membrane protein. The expression level of insoluble sjANT from Schistosoma japonicum in E. coli cell-free system could attain 472 μg/mL, about 25.2 times improvement over the previous report. The obtained insoluble sjANT can be resolubilized with different detergents. Among them, Digitonin could effectively solubilize approximate 38% of the target membrane protein. Moreover, sjANT can be further expressed in the hydrophobic E. coli cell-free system as a soluble form with presence of different detergents. The results suggested that Digitonin and Brij 58 were two ideal candidates to support high expression of soluble sjANT, and the highest soluble expression level (182 μg/mL) was achieved with the supplementation of 0.4% (v/v) Digitonin in the cell-free system. The present work has provided a rapid and efficient procedure to express the complex and highly toxic membrane protein in the cell-free system, and will be beneficial to construct a novel drug-discovery model to screen the sjANT-based inhibitors for schistosomiasis treatment.     

YidC, an assembly site for polytopic Escherichia coli membrane proteins located in immediate proximity to the SecYE translocon and lipids

Like its mitochondrial homolog Oxa1p, the inner membrane protein YidC of Escherichia coli is involved in the integration of membrane proteins. We have analyzed individual insertion steps of the polytopic E. coli membrane protein MtlA targeted as ribosome-nascent chain complexes to inner membrane vesicles. YidC can accommodate at least the first two transmembrane segments of MtlA at the protein lipid interface and retain them even though the length of the nascent chain would amply allow insertion into membrane lipids. An even longer insertion intermediate of MtlA is described that still has the first transmembrane helix bound to YidC while the third contacts SecE and YidC during integration. Our findings suggest that YidC forms a contiguous integration unit with the SecYE translocon and functions as an assembly site for polytopic membrane proteins mediating the formation of helix bundles prior to their release into the membrane lipids.     

Alternative fermentation conditions for improved Escherichia coli-based cell-free protein synthesis for proteins requiring supplemental components for proper synthesis

Escherichia coli-based cell-free protein synthesis is a powerful emerging tool for protein engineering due to the open, accessible nature of the reaction and its straightforward, economical potential for many diverse applications. One critical limitation of this system is the inability to express some complex, eukaryotic, and/or unnatural proteins at high expression yields. A potential solution is a synthetic-biology-like approach where cell-free reactions are supplemented by expressing the required supplemental components in the E. coli cells during the fermentation, which cells are used to prepare the extract for cell-free protein synthesis. Here we report adjustments to the fermentation conditions that increase yields of complex proteins upwards of 150% over standard conditions. We consider extracts containing GroEL/ES protein folding chaperones and extracts containing orthogonal tRNA/tRNA synthetase pairs for noncanonical amino acid incorporation. In contrast to standard cell-free synthesis, delaying the harvest of supplemented fermentations lead to increased and more consistent yields of proteins that required supplemental components. Protein yields enhanced by buffering the fermentation media pH lead to an average 52% decrease in yield cost, while costs for cases unchanged or negatively affected by buffering increased an average 14%. An apparent balance is required between the supplemental components and general extract protein profile.     

Rimonabant is a dual inhibitor of acyl CoA:cholesterol acyltransferases 1 and 2

Acyl coenzyme A:cholesterol acyltransferase (ACAT) catalyzes the intracellular synthesis of cholesteryl esters (CE). Both ACAT isoforms, ACAT1 and ACAT2, play key roles in the pathophysiology of atherosclerosis and ACAT inhibition retards atherosclerosis in animal models. Rimonabant, a type 1 cannabinoid receptor (CB1) antagonist, produces anti-atherosclerotic effects in humans and animals by mechanisms which are not completely understood. Rimonabant is structurally similar to two other cannabinoid receptor antagonists, AM251 and SR144528, recently identified as potent inhibitors of ACAT. Therefore, we examined the effects of Rimonabant on ACAT using both in vivo cell-based assays and in vitro cell-free assays. Rimonabant dose-dependently reduced ACAT activity in Raw 264.7 macrophages (IC₅₀ = 2.9 ± 0.38 μM) and isolated peritoneal macrophages. Rimonabant inhibited ACAT activity in intact CHO-ACAT1 and CHO-ACAT2 cells and in cell-free assays with approximately equal efficiency (IC₅₀ = 1.5 ± 1.2 μM and 2.2 ± 1.1 μM for CHO-ACAT1 and CHO-ACAT2, respectively). Consistent with ACAT inhibition, Rimonabant treatment blocked ACAT-dependent processes in macrophages, oxysterol-induced apoptosis and acetylated-LDL induced foam cell formation. From these results we conclude that Rimonabant is an ACAT1/2 dual inhibitor and suggest that some of the atherosclerotic beneficial effects of Rimonabant are, at least partly, due to inhibition of ACAT.     

Synthesis of silver nanoparticles by solar irradiation of cell-free Bacillus amyloliquefaciens extracts and AgNO3

Silver nanoparticles (AgNPs) were obtained by solar irradiation of cell-free extracts of Bacillus amyloliquefaciens and AgNO₃. Light intensity, extract concentration, and NaCl addition influenced the synthesis of AgNPs. Under optimized conditions (solar intensity 70,000 lx, extract concentration 3 mg/mL, and NaCl content 2 mM), 98.23 ± 0.06% of the Ag⁺ (1 mM) was reduced to AgNPs within 80 min, and the ζ-potential of AgNPs reached −70.84 ± 0.66 mV. TEM (Transmission electron microscopy) and XRD (X-ray diffraction) analysis confirmed that circular and triangular crystalline AgNPs with mean diameter of 14.6 nm were synthesized. Since heat-inactivated extracts also mediated the formation of AgNPs, enzymatic reactions are likely not involved in AgNPs formation. A high absolute ζ-potential value of the AgNPs, possibly caused by interaction with proteins likely explains the high stability of AgNPs suspensions. AgNPs showed antimicrobial activity against Bacillus subtilis and Escherichia coli in liquid and solid medium.     

Hydrolysis of the soluble fluorescent molecule carboxyumbelliferyl-beta-D-glucuronide by E. coli beta-glucuronidase as applied in a rugged, in situ optical sensor

Techniques utilizing β-glucuronidase (GUS) activity as an indicator of Escherichia coli (E. coli) presence use labeled glucuronides to produce optical signals. Carboxyumbelliferyl-β-d-glucuronide (CUGlcU) is a fluorescent labeled glucuronide that is soluble and highly fluorescent at natural water pHs and temperatures and, therefore, may be an ideal reagent for use in an in situ optical sensor. This paper reports for the first time the Michaelis-Menten kinetic parameters for the binding of E. coli GUS with CUGlcU as K_m = 910 μM, V_max = 41.0 μM min⁻¹, V_max/K_m 45.0 μmol L⁻¹ min⁻¹, the optimal pH as 6.5 ± 1.0, optimal temperature as 38 °C, and the Gibb's free energy of activation as 61.40 kJ mol⁻¹. Additionally, it was found CUGlcU hydrolysis is not significantly affected by heavy solvents suggesting proton transfer and solvent addition that occur during hydrolysis are not limiting steps. Comparison studies were made with the more common fluorescent molecule methylumbelliferyl-β-d-glucuronide (MUGlcU). Experiments showed GUS preferentially binds to MUGlcU in comparison to CUGlcU. CUGlcU was also demonstrated in a prototype optical sensor for the detection of E. coli. Initial bench testing of the sensor produced detection of low concentrations of E. coli (1.00 × 10³ CFU/100 mL) in 230 ± 15.1 min and high concentrations (1.05 × 10⁵ CFU/100 mL) in 8.00 ± 1.01 min.     

Impact of hapten presentation on antibody binding at lipid membrane interfaces

We report the effects of ligand presentation on the binding of aqueous proteins to solid supported lipid bilayers. Specifically, we show that the equilibrium dissociation constant can be strongly affected by ligand lipophilicity and linker length/structure. The apparent equilibrium dissociation constants (K_D) were compared for two model systems, biotin/anti-biotin and 2,4-dinitrophenyl (DNP)/anti-DNP, in bulk solution and at model membrane surfaces. The binding constants in solution were obtained from fluorescence anisotropy measurements. The surface binding constants were determined by microfluidic techniques in conjunction with total internal reflection fluorescence microscopy. The results showed that the bulk solution equilibrium dissociation constants for anti-biotin and anti-DNP were almost identical, K_D(bulk) = 1.7 ± 0.2 nM vs. 2.9 ± 0.1 nM. By contrast, the dissociation constant for anti-biotin antibody was three orders of magnitude tighter than for anti-DNP at a lipid membrane interface, K_D = 3.6 ± 1.1 nM vs. 2.0 ± 0.2 μM. We postulate that the pronounced difference in surface binding constants for these two similar antibodies is due to differences in the ligands’ relative lipophilicity, i.e., the more hydrophobic DNP molecules had a stronger interaction with the lipid bilayers, rendering them less available to incoming anti-DNP antibodies compared with the biotin/anti-biotin system. However, when membrane-bound biotin ligands were well screened by a poly(ethylene glycol) (PEG) polymer brush, the K_D value for the anti-biotin antibody could also be weakened by three orders of magnitude, 2.4 ± 1.1 μM. On the other hand, the dissociation constant for anti-DNP antibodies at a lipid interface could be significantly enhanced when DNP haptens were tethered to the end of very long hydrophilic PEG lipopolymers (K_D = 21 ± 10 nM) rather than presented on short lipid-conjugated tethers. These results demonstrate that ligand presentation strongly influences protein interactions with membrane-bound ligands.     

Membrane insertion of the mannitol permease of Escherichia coli occurs under conditions of impaired SecA function.

The membrane insertion of the mannitol permease (MtlA protein) of Escherichia coli, a polytopic cytoplasmic membrane protein possessing an uncleaved amphiphilic signal sequence, was studied using a cell-free protein synthesis system. The MtlA protein synthesized in the presence of inside-out cytoplasmic membrane vesicles was shown to insert into the membranes based on the following criteria: (a) co-sedimentation of the majority of the MtlA protein with the vesicles; (b) selective extraction of the membrane-associated MtlA by doxycholate but not by urea treatment; and (c) protease resistance of a defined MtlA fragment observed exclusively in the presence of membranes. Post-translational addition of membrane vesicles allowed membrane association of MtlA but did not allow efficient integration. In cell-free systems having reduced levels of the export factors SecA and SecB and exhibiting defective translocation of preOmpA and preLamB, insertion of the in vitro synthesized MtlA apparently occurred normally. In contrast, when membranes from the secY24ts mutant or trypsin-treated membranes were used, insertion of MtlA was reduced. In vivo experiments monitoring the permease activity of MtlA in the secA and secY mutants supported the conclusions of the in vitro results. Thus, the insertion of MtlA is essentially SecA- and SecB-independent but may be dependent on SecY and/or an as yet unidentified membrane protein. The requirements for the insertion of the mannitol permease are therefore clearly different from those for the translocation of most proteins having a cleavable hydrophobic signal sequence.     

Characterization of Membrane Protein Interactions by Isothermal Titration Calorimetry

Understanding the structure, folding, and interaction of membrane proteins requires experimental tools to quantify the association of transmembrane (TM) helices. Here, we introduce isothermal titration calorimetry (ITC) to measure integrin αIIbβ3 TM complex affinity, to study the consequences of helix–helix preorientation in lipid bilayers, and to examine protein-induced lipid reorganization. Phospholipid bicelles served as membrane mimics. The association of αIIbβ3 proceeded with a free energy change of − 4.61 ± 0.04 kcal/mol at bicelle conditions where the sampling of random helix–helix orientations leads to complex formation. At bicelle conditions that approach a true bilayer structure in effect, an entropy saving of > 1 kcal/mol was obtained from helix–helix preorientation. The magnitudes of enthalpy and entropy changes increased distinctly with bicelle dimensions, indicating long-range changes in bicelle lipid properties upon αIIbβ3 TM association. NMR spectroscopy confirmed ITC affinity measurements and revealed αIIbβ3 association and dissociation rates of 4500 ± 100 s^− 1 and 2.1 ± 0.1 s^− 1, respectively. Thus, ITC is able to provide comprehensive insight into the interaction of membrane proteins.     

Effects on capacitance by overexpression of membrane proteins

Functional Channelrhodopsin-2 (ChR2) overexpression of about 10⁴ channels/μm² in the plasma membrane of HEK293 cells was studied by patch-clamp and freeze-fracture electron microscopy. Simultaneous electrorotation measurements revealed that ChR2 expression was accompanied by a marked increase of the area-specific membrane capacitance (C_m). The C_m increase apparently resulted partly from an enlargement of the size and/or number of microvilli. This is suggested by a relatively large C_m of 1.15 ± 0.08 μF/cm² in ChR2-expressing cells measured under isotonic conditions. This value was much higher than that of the control HEK293 cells (0.79 ± 0.02 μF/cm²). However, even after complete loss of microvilli under strong hypoosmolar conditions (100 mOsm), the ChR2-expressing cells still exhibited a significantly larger C_m (0.85 ± 0.07 μF/cm²) as compared to non-expressing control cells (0.70 ± 0.03 μF/cm²). Therefore, a second mechanism of capacitance increase may involve changes in the membrane permittivity and/or thickness due to the embedded ChR2 proteins.     

Membrane phase behavior of Escherichia coli during desiccation, rehydration, and growth recovery

The membrane lipid bilayer is one of the primary cellular components affected by variations in hydration level, which cause changes in lipid packing that may have detrimental effects on cell viability. In this study, Fourier transform infrared (FTIR) spectroscopy was used to quantify changes in the membrane phase behavior, as identified by membrane phase transition temperature (T_m), of Escherichia coli during desiccation and rehydration. Extensive cell desiccation (1 week at 20%-40% RH) resulted in an increase in T_m from 8.4 ± 1.7 °C (in undried control samples) to 16.5 ± 1.3 °C. Fatty acid methyl ester analysis (FAME) on desiccated samples showed an increase in the percent composition of saturated fatty acids (FAs) and a decrease in unsaturated FAs in comparison to undried control samples. However, rehydration of E. coli resulted in a gradual regression in T_m, which began approximately 1 day after initial rehydration and plateaued at 12.5 ± 1.8 °C after approximately 2 days of rehydration. FAME analysis during progressive rehydration revealed an increase in the membrane percent composition of unsaturated FAs and a decrease in saturated FAs. Cell recovery analysis during rehydration supported the previous findings that showed that E. coli enter a viable but non-culturable (VBNC) state during desiccation and recover following prolonged rehydration. In addition, we found that the delay period of approximately 1 day of rehydration prior to membrane reconfiguration (i.e. decrease in T_m and increase in membrane percent composition of unsaturated FAs) also preceded cell recovery. These results suggest that changes in membrane structure and state related to greater membrane fluidity may be associated with cell proliferation capabilities.     

Development of cell-free protein synthesis platforms for disulfide bonded proteins

The use of cell-free protein synthesis (CFPS) for recombinant protein production is emerging as an important technology. For example, the openness of the cell-free system allows control of the reaction environment to promote folding of disulfide bonded proteins in a rapid and economically feasible format. These advantages make cell-free protein expression systems particularly well suited for producing patient specific therapeutic vaccines or antidotes in response to threats from natural and man-made biological agents and for pharmaceutical proteins that are difficult to produce in living cells. In this work we assess the versatility of modern cell-free methods, optimize expression and folding parameters, and highlight the importance of rationally designed plasmid templates for producing mammalian secreted proteins, fusion proteins, and antibody fragments in our E. coli-based CFPS system. Two unique CFPS platforms were established by developing standardized extract preparation protocols and generic cell-free reaction conditions. Generic reaction conditions enabled all proteins to express well with the best therapeutic protein yield at 710 microg/mL, an antibody fragment at 230 microg/mL, and a vaccine fusion protein at 300 microg/mL; with the majority correctly folded. Better yields were obtained when cell-free reaction conditions were optimized for each protein. Establishing general CFPS platforms enhances the potential for cell-free protein synthesis to reliably produce complex protein products at low production and capital costs with very rapid process development timelines.     

MemStar: A one-shot Escherichia coli-based approach for high-level bacterial membrane protein production

Optimising membrane protein production yields in Escherichiacoli can be time- and resource-consuming. Here, we present a simple and effective Membrane protein Single shot amplification recipe: MemStar. This one-shot amplification recipe is based on the E. coli strain Lemo21(DE3), the PASM-5052 auto-induction medium and, contradictorily, an IPTG induction step. Using MemStar, production yields for most bacterial membrane proteins tested were improved to reach an average of 5 mg L⁻¹ per OD₆₀₀ unit, which is significantly higher than yields obtained with other common production strategies. With MemStar, we have been able to obtain new structural information for several transporters, including the sodium/proton antiporter NapA.     

Plasma luteinizing hormone concentrations in cows given repeated treatments or three different doses of gonadotropin releasing hormone

We hypothesized that: (i) repeated GnRH treatments would increase the magnitude and duration of the LH surge and would increase progesterone (P4) concentrations after ovulation; and (ii) the release of pituitary LH would be greater in response to larger doses of GnRH. In Experiment 1, ovary-intact cows were given an intravaginal P4 (1.9 g) insert (CIDR) for 10 d and 500 μg cloprostenol (PGF) at CIDR removal to synchronize estrus. On Days 7 or 8 after estrus, cows received two PGF treatments (12 h apart) and 100 μg GnRH at 36 (Control), 36 and 38 (GnRH38), or 36 and 40 h (GnRH40) after the first PGF. Mean plasma LH concentration (ng/mL) was greater (P < 0.05) in GnRH38 (8.8 ± 1.1) than in Control (5.1 ± 1.3), with that in GnRH40 (5.8 ± 1.3) being intermediate. Although the duration (h) of the LH surge was longer in GnRH40 (8.0 ± 0.4) than in either GnRH38 (P < 0.05; 7.0 ± 0.3) or Control (P < 0.09; 7.1 ± 0.4), mean postovulatory P4 (ng/mL) was greater (P < 0.01) in Control (4.2 ± 0.7) than in GnRH38 (2.9 ± 0.6) or GnRH40 (3.0 ± 0.7) cows. In Experiment 2, ovariectomized cows were given a CIDR for 10 d and 2 mg of estradiol cypionate im at CIDR insertion. Thirty-six hours after CIDR removal, cows received, 50, 100, or 250 μg of GnRH. Cows given 250 μg GnRH released more LH (9.4 ± 1.4 ng/mL) than those given 50 or 100 μg (6.1 ± 1.3 and 5.4 ± 1.4 ng/mL, respectively), and had an LH surge of longer duration than those given 50 μg (6.8 ± 0.4 vs. 5.1 ± 0.3 h). In summary, ovary-intact cows in the GnRH38 group had greater mean and peak LH concentrations, but subsequent plasma P4 concentrations were lower than in Control cows. Ovariectomized cows given 250 μg GnRH had a greater pituitary release of LH.     

The Contribution of a Covalently Bound Cofactor to the Folding and Thermodynamic Stability of an Integral Membrane Protein

The factors controlling the stability, folding, and dynamics of integral membrane proteins are not fully understood. The high stability of the membrane protein bacteriorhodopsin (bR), an archetypal member of the rhodopsin photoreceptor family, has been ascribed to its covalently bound retinal cofactor. We investigate here the role of this cofactor in the thermodynamic stability and folding kinetics of bR. Multiple spectroscopic probes were used to determine the kinetics and energetics of protein folding in mixed lipid/detergent micelles in the presence and absence of retinal. The presence of retinal increases extrapolated values for the overall unfolding free energy from 6.3 ± 0.4 kcal mol^− 1 to 23.4 ± 1.5 kcal mol^− 1 at zero denaturant, suggesting that the cofactor contributes 17.1 kcal mol^− 1 towards the overall stability of bR. In addition, the cooperativity of equilibrium unfolding curves is markedly reduced in the absence of retinal with overall m-values decreasing from 31.0 ± 2.0 kcal mol^− 1 to 10.9 ± 1.0 kcal mol^− 1, indicating that the folded state of the apoprotein is less compact than the equivalent for the holoprotein. This change in the denaturant response means that the difference in the unfolding free energy at a denaturant concentration midway between the two unfolding curves is only ca 3-6 kcal mol^− 1. Kinetic data show that the decrease in stability upon removal of retinal is associated with an increase in the apparent intrinsic rate constant of unfolding, k_u^H2O, from ~1 × 10^− 16 s^− 1 to ~1 × 10^− 4 s^− 1 at 25 °C. This correlates with a decrease in the unfolding activation energy by 16.3 kcal mol^− 1 in the apoprotein, extrapolated to zero SDS. These results suggest that changes in bR stability induced by retinal binding are mediated solely by changes in the activation barrier for unfolding. The results are consistent with a model in which bR is kinetically stabilized via a very slow rate of unfolding arising from protein-retinal interactions that increase the rigidity and compactness of the polypeptide chain.     

Selective toxin-lipid membrane interactions of natural, haemolytic Scyphozoan toxins analyzed by surface plasmon resonance

A comparison of the molecular interaction of natural Scyphozoan lysins with their bioactivity in a haemolytic assay was performed by establishing an efficient, automatable and reproducible procedure for the measurement of protein-membrane interactions. The toxin-membrane interactions were analyzed utilising a chip-based technology with immobilized liposomes as artificial cell membranes. The technique was established with streptolysin O as a cholesterol-selective model toxin and its cholesterol-selectivity has been proven. The haemolytic potency of protein fractions derived from the venom of the jellyfish Aurelia aurita and Cyanea capillata was tested and EC50 values of 35.3 μg/mL and 43.1 μg/mL against sheep and 13.5 μg/mL and 8.8 μg/mL against rabbit erythrocytes were measured. Cell membrane binding as a first step in the haemolytic process was analyzed using the Biacore^® technology. Major cell membrane lipids (cholesterol, sphingomyelin and phosphatidylcholine) were immobilized as pure liposomes and in binary mixtures. A preference for cholesterol and sphingomyelin of both jellyfish species was demonstrated. The specificity of the method was proven with a non-haemolytic A. aurita protein fraction that did not express a lipid binding. Additionally, an inactivated C. capillata lysine with negligible haemolytic activity showed a remaining but reduced adsorption onto lipid layers. The binding level of the lytic venom fraction of these dominant boreal jellyfish species increased as a function of protein concentration. The binding strength was expressed in RU50 values ranging from 12.4 μg/mL to 35.4 μg/mL, which were in the same order of magnitude as the EC50 values in the haemolytic assay.     

Cell-free protein synthesis system from Escherichia coli cells cultured at decreased temperatures improves productivity by decreasing DNA template degradation

Cell-free protein synthesis has become one of the standard methods for protein expression. One of the major advantages of this method is that PCR-amplified linear DNA fragments can be directly used as templates for protein synthesis. The productivity of cell-free protein synthesis using linear DNA templates is generally lower than that from plasmid DNA templates, especially when using an Escherichia coli cell extract. In the present study, we found that a simple modification of the protocol for cell extract preparation from E. coli, just by altering the cultivation temperature (37 °C) of the cells to a moderately lower range (20-34 °C), dramatically reduced the linear DNA degradation activity in the cell extract. This modification greatly improved the productivity of cell-free protein synthesis from linear DNA templates. The removal of the RecD protein, one of the components of exonuclease V, from the extract had almost the same effect, indicating that the linear DNA degradation activity in the extract was mainly due to the RecD protein and that its expression level was decreased at the lower cultivation temperature.