Effect of shearing on formation of silk fibers from regenerated Bombyx mori silk fibroin aqueous solution

In this paper, the spinnable regenerated silk fibroin aqueous solution with high concentration was prepared and the regenerated silk fibers were obtained from the aqueous solution by two different spinning processes at ambient temperature. The orientation of these fibers was characterized by polarizing microscope. Their secondary structure was investigated by Raman spectroscopy and related mechanical properties were also measured. These data showed that shearing is an important step for increasing orientation and silk II (β-sheet) structure, and the mechanical properties of the regenerated silk fibers can also be improved by shearing.     

Biodegradable materials based on silk fibroin and keratin

Wool and silk were dissolved and used for the preparation of blended films. Two systems are proposed: (1) blend films of silk fibroin and keratin aqueous solutions and (2) silk fibroin and keratin dissolved in formic acid. The FTIR spectra of pure films cast from aqueous solutions indicated that the keratin secondary structure mainly consists of alpha-helix and random coil conformations. The IR spectrum of pure SF is characteristic of films with prevalently amorphous structure (random coil conformation). Pure keratin film cast from formic acid shows an increase in the amount of beta-sheet and disordered keratin structures. The FTIR pattern of SF dissolved in formic acid is characteristic of films with prevalently beta-sheet conformations with beta-sheet crystallites embedded in an amorphous matrix. The thermal behavior of the blends confirmed the FTIR results. DSC curve of pure SF is typical of amorphous SF and the curve of pure keratin show the characteristic melting peak of alpha-helices for the aqueous system. These patterns are no longer observed in the films cast from formic acid due to the ability of formic acid to induce crystallization of SF and to increase the amount of beta-sheet structures on keratin. The nonlinear trend of the different parameters obtained from FTIR analysis and DSC curves of both SF/keratin systems indicate that when proteins are mixed they do not follow additives rules but are able to establish intermolecular interactions. Degradable polymeric biomaterials are preferred candidates for medical applications. It was investigated the degradation behavior of both SF/keratin systems by in vitro enzymatic incubation with trypsin. The SF/keratin films cast from water underwent a slower biological degradation than the films cast from formic acid. The weight loss obtained is a function of the amount of keratin in the blend. This study encourages the further investigation of the type of matrices presented here to be applied whether in scaffolds for tissue engineering or as controlled release drug delivery vehicles.     

Enzymatic degradation of Antheraea pernyi silk fibroin 3D scaffolds and fibers

In this study, the in vitro enzymatic degradation behavior of the regenerated Antheraea pernyi silk fibroin (Ap-SF) three-dimensional (3D) scaffolds and the natural Ap-SF fibers exposed to enzyme solutions of α-chymotrypsin, collagenase IA and protease XIV were investigated. The results indicated that all three proteases could degrade the Ap-SF 3D scaffolds, and the degradation ability was in the order protease XIV>collagenase IA>α-chymotrypsin. The regenerated Ap-SF 3D scaffold could be degraded completely in 18 days when exposed to 1.0 U/ml protease XIV at 37°C, whereas under the same condition, the natural Ap-SF fiber only lost 5.6% of its weight, revealing its long-term degradation characteristics. There were abundant peptides and some free amino acids in the Ap-SF degradation products, but no free alanine. We suggested that the polyalanine block in the regenerated Ap-SF 3D scaffolds had strong resistance to enzyme attack. The proteolytic attack occurred in the non-polyalanine block of Ap-SF. The degradation rate of Ap-SF materials depended on the molecular conformation of Ap-SF, which could be controlled in the manufacturing process.     

Significantly reinforced composite fibers electrospun from silk fibroin/carbon nanotube aqueous solutions

Microcomposite fibers of regenerated silk fibroin (RSF) and multiwalled carbon nanotubes (MWNTs) were successfully prepared by an electrospinning process from aqueous solutions. A quiescent blended solution and a three-dimensional Raman image of the composite fibers showed that functionalized MWNTs (F-MWNTs) were well dispersed in the solutions and the RSF fibers, respectively. Raman spectra and wide-angle X-ray diffraction (WAXD) patterns of RSF/F-MWNT electrospun fibers indicated that the composite fibers had higher β-sheet content and crystallinity than the pure RSF electrospun fibers, respectively. The mechanical properties of the RSF electrospun fibers were improved drastically by incorporating F-MWNTs. Compared with the pure RSF electrospun fibers, the composite fibers with 1.0 wt % F-MWNTs exhibited a 2.8-fold increase in breaking strength, a 4.4-fold increase in Young's modulus, and a 2.1-fold increase in breaking energy. Cytotoxicity test preliminarily demonstrated that the electrospun fiber mats have good biocompatibility for tissue engineering scaffolds.     

Electron microscope examination of fibroin precipitated from silk fibroin solutions

The structure of gels formed from solutions of silk fibroin has been observed by electron microscopy. The gels consist of fibrils, and possible methods of formation of these fibrils are suggested.     

Investigation of uranium recovery from dilute aqueous solutions using silk fibroin

The uranium uptake ability of silk fibroin was investigated. High ability to uptake uranium from nonsaline water containing 2.500 mg of uranium was observed with the silk fibroin tested. The uranium uptake was very rapid and was dependent on pH, uranium concentration, temperature, and retention time. Almost all uranium taken up is easily eluted with 1 mol/L CH₃COONH₄. This biomatrix, therefore appears to have potential for use in a commercial process for uranium recovery from uranium-containing waste water.     

The fine structure of silk fibroin

The fine structure of Bombyx mori silk fibroin was investigated by electron microscopy and X-ray diffraction techniques. Examination of silk fibers fragmented with ultrasonic radiation and negatively stained revealed the presence of ribbon-like filaments of well-defined lateral dimensions. Analysis of the breadths of the equatorial reflections in the X-ray diffraction pattern of fibroin yielded similar dimensions for the lateral extent of the crystallites. It is concluded that the crystalline material in B. mori silk fibroin is in the form of ribbon-like filaments of considerable length parallel to the fiber axis and of lateral dimensions approximately 20 x 60 A.     

Isolation of giant silk fibroin polysomes and fibroin mRNP particles using a novel ribonuclease inhibitor, hydroxystilbamidine

Hydroxystilbamidine isethionate, a dye capable of binding to both DNA and RNA, has been found to be a powerful inhibitor of cellular ribonucleases. A procedure has been developed that, with the aid of this compound, permits the preparative isolation of giant silk fibroin polyribosomes from the posterior silk gland of Bombyx mori. The polyribosomes contain approximately 45-112 ribosomal particles, as judged by electron microscopy. Treatment of giant fibroin polyribosomes with EDTA releases a particle that sediments at 125S. This mRNP particle contains biologically active silk fibroin mRNA, as judged by cell-free translation in an mRNA-dependent reticulocyte cell-free system.     

Tunable silk: using microfluidics to fabricate silk fibers with controllable properties

Despite widespread use of silk, it remains a significant challenge to fabricate fibers with properties similar to native silk. It has recently been recognized that the key to tuning silk fiber properties lies in controlling internal structure of assembled β-sheets. We report an advance in the precise control of silk fiber formation with control of properties via microfluidic solution spinning. We use an experimental approach combined with modeling to accurately predict and independently tune fiber properties including Young's modulus and diameter to customize fibers. This is the first reported microfluidic approach capable of fabricating functional fibers with predictable properties and provides new insight into the structural transformations responsible for the unique properties of silk. Unlike bulk processes, our method facilitates the rapid and inexpensive fabrication of fibers from small volumes (50 μL) that can be characterized to investigate sequence-structure-property relationships to optimize recombinant silk technology to match and exceed natural silk properties.     

An ESR study of spin-labeled silk fibroin membranes and spin-labeled glucose oxidase immobilized in silk fibroin membranes

This article describes the characteristics of silk fibroin membranes and glucose oxidase, immobilized in membranes as determined by a variety of physical methods, mainly the spin-label electron spin resonance (ESR) method. The properties of membranes insolubilized by different methods, i. e., immersion in 80% methanol aqueous solution, uniaxially drawing by placing on a stretcher, and hydration by placing in a desiccator of 96% relative humidity (RH) for 17 h, are compared. The results are also analyzed in relation to ESR spectra of spin-labeled immobilized glucose oxidase and 4-hydroxy-2,2,6,6-tetramethyl-1-piperidinyloxy as a model of the substrate. It is concluded that the heterogeneous structures of the swollen membranes in water differ locally among membranes insolubilized by different methods, but the immobilized state of the enzyme in such membranes is mostly similar. This is correlated to the fact that the thermal or pH stabilities are essentially same among glucose-oxidase-immobilized silk fibroin membranes insolubilized by different methods.     

糖化酶在丝素膜上的固定化及性质研究

利用丝素作糖化酶的固定化载体,应用包埋法和共价交联法两种方法,制备了固定化糖化酶丝素膜,研究结果表明,共价交联法制备的酶膜活力较高,且回收率可达50%以上;与溶液酶相比,固定化酶的最适温度提高了10℃,热稳定性与贮存稳定性也有了很大提高。     

Studies on silk fibroin of the silkworm Bombyx mori

A procedure has been developed to obtain native fibroin in a pure state from the reservoir part of the silk gland. The purified protein has a sedimentation coefficient of 10 S as determined on sucrose density gradients and the amino acid composition is similar to that reported for fibroin from the cocoons. The effects of various solvents has been studied; lithium thiocyanate was found to be the solvent of choice. By in vivo labeling of fibroin with [³H]glycine and [¹⁴C]alanine it was demonstrated that fibroin synthesized in the posterior part of the gland and that stored in the reservoir part are identical.     

Degradation mechanism and control of silk fibroin

Controlling the degradation process of silk is an important and interesting subject in the field of biomaterials. In the present study, silk fibroin films with different secondary conformations and nanostructures were used to study degradation behavior in buffered protease XIV solution. Different from previous studies, silk fibroin films with highest β-sheet content achieved the highest degradation rate in our research. A new degradation mechanism revealed that degradation behavior of silk fibroin was related to not only crystal content but also hydrophilic interaction and then crystal-noncrystal alternate nanostructures. First, hydrophilic blocks of silk fibroin were degraded. Then, hydrophobic crystal blocks that were formerly surrounded and immobilized by hydrophilic blocks became free particles and moved into solution. Therefore, on the basis of the mechanism, which enables the process to be more controllable and flexible, controlling the degradation behavior of silk fibroin without affecting other performances such as its mechanical or hydrophilic properties becomes feasible, and this would greatly expand the applications of silk as a biomedical material.     

Flexibility regeneration of silk fibroin in vitro

Although natural silk fibers have excellent strength and flexibility, the regenerated silk materials generally become brittle in the dry state. How to reconstruct the flexibility for silk fibroin has bewildered scientists for many years. In the present study, the flexible regenerated silk fibroin films were achieved by simulating the natural forming and spinning process. Silk fibroin films composed of silk I structure were first prepared by slow drying process. Then, the silk fibroin films were stretched in the wet state, following the structural transition from silk I to silk II. The difference between the flexible film and different brittle regenerated films was investigated to reveal the critical factors in regulating the flexibility of regenerated silk materials. Compared with the methanol-treated silk films, although having similar silk II structure and water content, the flexible silk films contained more bound water rather than free water, implying the great influence of bound water on the flexibility. Then, further studies revealed that the distribution of bound water was also a critical factor in improving silk flexibility in the dry state, which could be regulated by the nanoassembly of silk fibroin. Importantly, the results further elucidate the relation between mechanical properties and silk fibroin structures, pointing to a new mode of generating new types of silk materials with enhanced mechanical properties in the dry state, which would facilitate the fabrication and application of regenerated silk fibroin materials in different fields.     

Phase behavior and hydration of silk fibroin

The osmotic stress method was applied to study the thermodynamics of supramolecular self-assembly phenomena in crystallizable segments of Bombyx mori silkworm silk fibroin. By controlling compositions and phases of silk fibroin solution, the method provided a means for the direct investigation of microscopic and thermodynamic details of these intermolecular interactions in aqueous media. It is apparent that as osmotic pressure increases, silk fibroin molecules are crowded together to form silk I structure and then with further increase in osmotic pressure become an antiparallel beta-sheet structure, silk II. A partial ternary phase diagram of water-silk fibroin-LiBr was constructed based on the results. The results provide quantitative evidence that the silk I structure must contain water of hydration. The enhanced control over structure and phase behavior using osmotic stress, as embodied in the phase diagram, could potentially be utilized to design a new route for water-based wet spinning of regenerated silk fibroin.     

用桑蚕丝素蛋白制备邻苯二酚酶传感器

从蘑菇组织中提取邻苯二酚粗酶 ,利用丝素蛋白在甲醇作用下 ,其分子结构由可溶性randomcoil向不容性 β -sheet发生转变 ,从而将邻苯二酚粗酶固定在丝素蛋白膜中 ,制得邻苯一酚酶传感器。该传感器在pH6 0的KH2 PO4 -Na2 HPO4 工作介质中具有良好的响应特性 ,工作线性范围为 1 0× 10 - 5- 2 5× 10 - 4mol L ,检测限 5 0× 10 - 6 mol L ,响应时间 2min。酶经丝素蛋白的固定后具有较强的耐热性能 ,并能比较长时间保持酶的活性。该传感器在KH2 PO4 -Na2 HPO4 缓冲溶液的保存下 ,其使用寿命可达 2个月以上