Three-dimensional structure of vaccinia virus-produced human papillomavirus type 1 capsids.

The capsid proteins of papillomavirus self-assemble to form empty capsids or virus-like particles that appear quite similar to naturally occurring virions by conventional electron microscopy. To characterize such virus-like particles more fully, cryoelectron microscopy and image analysis techniques were used to generate three-dimensional reconstructions of capsids produced by vaccinia virus recombinants (V capsids) that expressed human papillomavirus type 1 L1 protein only or both L1 and L2 proteins. All V capsids had 72 pentameric capsomers arranged on a T = 7 icosahedral lattice. Each particle (approximately 60 nm in diameter) consisted of an approximately 2-nm-thick shell of protein with a radius of 22 nm with capsomers that extend approximately 6 nm from the shell. At a resolution of 3.5 nm, both V capsid structures appear identical to the capsid structure of native human papillomavirus type 1 (T. S. Baker, W. W. Newcomb, N. H. Olson, L. M. Cowsert, C. Olson, and J. C. Brown, Biophys. J. 60:1445-1456, 1991), thus implying that expressed and native capsids are structurally equivalent.     

Mechanical disassembly of single virus particles reveals kinetic intermediates predicted by theory

New experimental approaches are required to detect the elusive transient intermediates predicted by simulations of virus assembly or disassembly. Here, an atomic force microscope (AFM) was used to mechanically induce partial disassembly of single icosahedral T=1 capsids and virions of the minute virus of mice. The kinetic intermediates formed were imaged by AFM. The results revealed that induced disassembly of single minute-virus-of-mice particles is frequently initiated by loss of one of the 20 equivalent capsomers (trimers of capsid protein subunits) leading to a stable, nearly complete particle that does not readily lose further capsomers. With lower frequency, a fairly stable, three-fourths-complete capsid lacking one pentamer of capsomers and a free, stable pentamer were obtained. The intermediates most frequently identified (capsids missing one capsomer, capsids missing one pentamer of capsomers, and free pentamers of capsomers) had been predicted in theoretical studies of reversible capsid assembly based on thermodynamic-kinetic models, molecular dynamics, or oligomerization energies. We conclude that mechanical manipulation and imaging of simple virus particles by AFM can be used to experimentally identify kinetic intermediates predicted by simulations of assembly or disassembly.     

Cleavage by Formamide of Intercapsomer Bonds in Adenovirus Types 4 and 7 Virions and Hemagglutinins

When crude preparations of adenovirus types 4 and 7 were treated with solutions of formamide, a complete or nearly complete inactivation of infectivity could be achieved without affecting the complement fixation titers of the same preparations. Studies on purified virions showed that the intersubunit bonds within the viral capsid were broken and single capsomers were released as the result of treatment by formamide. When subjected to the same treatment, hemagglutinins were sequentially converted into incomplete hemagglutinins (pentons), which were in turn converted into penton bases and fibers.     

Letter: Capsid structure of bacteriophage lambda

The arrangement of capsomers in the capsid of phage λ has been investigated by electron micrography of negatively stained fragments of empty capsids, polyheads, and intact virions. The proposed structure is a composite T = 7 levo lattice, with hexamer and pentamer clustering of the D protein and trimer clustering of the E protein. Such a lattice requires that the λ capsid contain 420 copies of the D and E proteins, a number compatible with recent chemical determinations.     

The coiled-coil domain of the adenovirus type 5 protein IX is dispensable for capsid incorporation and thermostability

The 14.4-kDa hexon-associated protein IX (pIX) acts as a cement in the capsids of primate adenoviruses and confers a thermostable phenotype. Here we show that deletion of amino acids 100 to 114 of adenovirus type 5 pIX, which eliminates the conserved coiled-coil domain, impairs its capacity to self-associate. However, pIXDelta100-114 is efficiently incorporated into the viral capsid, and the resulting virions are thermostable. Deletion of the central alanine-rich domain, as in pIXDelta60-72, does not impair self-association, incorporation into the capsid, or the thermostable phenotype. These data demonstrate, first, that the self-association of pIX is dispensable for its incorporation into the capsid and generation of the thermostability phenotype and, second, that the increased thermostability results from pIX monomers binding to different hexon capsomers rather than capsid stabilization by pIX multimers.     

Nuclear import and DNA binding of human papillomavirus type 45 L1 capsid protein

During the life cycle of human papillomaviruses (HPVs), the L1 capsid proteins seem to enter the nucleus twice: once after the virions infect the cells, and later during the productive phase when they assemble the replicated HPV genomic DNA into infectious virions. We established for the high-risk HPV45 that when digitonin-permeabilized HeLa cells were incubated with L1 homopentameric capsomers, the HPV45 L1 protein was imported into the nucleus in a receptor-mediated manner. In contrast, intact capsids were not able to enter the nucleus. Immunoisolation assays showed that HPV45 L1 capsomers interact with cytosolic karyopherin alpha 2 beta 1 heterodimers. HPV45 L1 bound strongly to karyopherin alpha 2, and weakly to karyopherin beta 1, as did its nuclear localization signal (NLS). Nuclear import of HPV45 L1, or of a GST-NLS(HPV45L1) fusion protein was efficiently mediated by karyopherin alpha 2 beta 1 heterodimers, and only weakly by karyopherin beta 1. Nuclear import required RanGDP, but was independent of GTP hydrolysis by Ran. Together, these data suggest that the major nuclear import pathway for HPV45 L1 major capsid protein in infected host cells is mediated by karyopherin alpha 2 beta 1 heterodimers and that GTP hydrolysis by Ran is not required for import. Remarkably, HPV45 L1 capsomers can interact nonspecifically with different types of HPV-DNA, and the DNA binding region of HPV45 L1 overlaps with its NLS sequence.     

Structure and Development of Viruses as Observed in the Electron Microscope: XI. Entry and Uncoating of Herpes Simplex Virus

Two morphologically distinct types of capsids are described. The dense capsid appeared to be disrupted near the cellular membrane with release of core material. The light capsid was more stable and was frequently encountered close to the nucleus, where empty capsids were also found. Pretreatment of cells before infection with either puromycin or actinomycin D markedly decreased the percentage of empty capsids. It is suggested that the two types of capsids play different roles in the process of initiating infection. One (the dense capsid) releases deoxyribonucleic acid (DNA) shortly after entry. This DNA is transcribed into a virus-specific ribonucleic acid, which codes for an enzyme capable of altering the permeability of the second type of capsid (the light capsid). In proximity to the nucleus, the infectious DNA then escapes without gross disruption of the capsid.     

Structures of bovine and human papillomaviruses. Analysis by cryoelectron microscopy and three-dimensional image reconstruction.

The structures of bovine papillomavirus type 1 (BPV-1) and human papillomavirus type 1 (HPV-1) were determined at 2.5 nm resolution by cryoelectron microscopy and three dimensional image reconstruction techniques. As expected, the reconstructions showed that both viruses consist of a T = 7 icosahedral capsid (approximately 60 nm in diameter) which surrounds a nucleohistone core. The capsid morphologies of the two viruses are nearly indistinguishable. Each capsid consists of a shell layer (approximately 2 nm thick) of nearly continuous density from which capsomers project radially to a maximum height of approximately 5.8 nm. The five-coordinate (pentavalent) and six-coordinate (hexavalent) capsomers both exhibit distinct five-fold axial symmetry as was observed for SV40 and polyoma viruses. Thus, both genera (papilloma and polyoma) of the papovavirus family have now been shown to have the characteristic "all-pentamer" capsid construction. BPV-1 and HPV-1 capsomers consist of a thick (8.6 nm diameter) trunk that broadens distally to form a regular five-pointed, star-shaped head, and proximally to create the shell layer where capsomers associate. A cylindrical channel (approximately 2.8 nm diameter) extends along the axis of each capsomer from the interior of the virus to a point approximately half way to the capsomer surface. Computationally sectioned views of individual capsomers displayed at decreasing radii show that each of the five capsomer subunits (in both pentavalent and hexavalent capsomers) makes a pronounced (30 degrees) left-handed twist just above the outer surface of the capsid shell. Similar views of the reconstructions also clarify the morphology of intercapsomer contacts. For example, they show how hexavalent capsomers coordinate six neighboring capsomers despite the fact that they contain only five subunits. The system of intercapsomer contacts is indistinguishable in BPV-1 and HPV-1, but quite different from that reported for polyoma virus capsids assembled in vitro from the major capsid protein, VP1 (D. M. Salunke, D. L. D. Caspar, and R. L. Garcea. 1989. Biophys. J. 56:887-900). Thus, because both polyoma and papilloma viruses have all-pentamer capsids, it appears that intracapsomer subunit-subunit interactions which stabilize pentameric capsomers are better preserved evolutionarily than those involved in capsomer-capsomer contacts.     

Use of Ar+ plasma etching to localize structural proteins in the capsid of herpes simplex virus type 1.

Partially cored herpes simplex virus type 1 (HSV-1) capsids (B capsids) were eroded in a low-energy (0.5-keV) Ar+ ion plasma under conditions in which the outermost structural proteins were expected to be degraded before more internal ones. After various periods of etching, the proteins remaining intact were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and determined quantitatively by densitometric scanning of the stained gels. The results showed that the major capsid polypeptide (VP5) and two other capsid proteins, VP19 and VP23, were degraded rapidly beginning as soon as capsids were exposed to the ion plasma. In contrast, significant lags were observed for erosion of VP21, VP22a, and VP24, suggesting that these proteins were available to accelerated ions only after other, more external structures had been damaged or eroded away. The results suggest that VP5, VP19, and VP23 are exposed on the surface of the capsid, while VP21, VP22a, and VP24 are found inside the capsid cavity. The experiments are consistent with the view that VP5 constitutes the major structural component of the hexavalent capsomers. It is proposed that VP19 and VP23 may form other surface structures such as the pentavalent capsomers, the capsid floor, or the intercapsomeric fibers.     

Nuclear import of HPV11 L1 capsid protein is mediated by karyopherin alpha2beta1 heterodimers.

L1 major capsid proteins of human papillomaviruses (HPVs) enter the nuclei of host cells at two times during the viral life cycle: 1) after infection and 2) later during the productive phase, when they assemble the replicated HPV genomic DNA into infectious virions. L1 proteins are stable in two oligomeric configurations: as homopentameric capsomers, and as capsids composed of 72 capsomers. We found that intact L1 capsids of HPV type 11 cannot enter the nucleus, suggesting that capsid disassembly may be required for HPV11 L1 nuclear import. We established that HPV11 L1 is imported in a receptor-mediated manner into the nuclei of digitonin-permeabilized HeLa cells. HPV11 L1 docked at the nuclear pore complexes via karyopherin alpha2beta1 heterodimers. Anti-karyopherin-beta1 and anti-karyopherin alpha2 antibodies specifically inhibited nuclear import of HPV11 L1. Moreover, nuclear import of HPV11 L1 could be reconstituted using karyopherin alpha2, beta1, RanGDP and p10. In agreement with the docking and import data, we found that HPV11 L1 binds to karyopherin alpha2 and that this interaction is inhibited by a peptide representing the classical nuclear localization signal of SV40 T antigen. These results strongly suggest that HPV11 L1 enters the nucleus of the infected host cell via the karyopherin alpha2beta1 pathway.     

Dissecting the roles of VP0 cleavage and RNA packaging in picornavirus capsid stabilization: the structure of empty capsids of foot-and-mouth disease virus.

Empty capsids of foot-and-mouth disease virus (FMDV) type A22 Iraq 24/64, whose structure has been solved by X-ray crystallography, are unusual for picornaviruses since they contain VP2 and VP4, the cleavage products of the protein precursor VP0. Both the N terminus of VP1 and the C terminus of VP4, which pack together close to the icosahedral threefold symmetry axis where three pentamers associate, are more disordered in the empty capsid than they are in the RNA-containing virus. The ordering of these termini in the presence of RNA strengthens interactions within a single protomer and between protomers belonging to different pentamers. The disorder in the FMDV empty capsid forms a subset of that seen in the poliovirus empty capsid, which has VP0 intact. Thus, VP0 cleavage confers stability on the picornavirus capsid over and above that attributable to RNA encapsidation. In both FMDV and poliovirus empty capsids, the internal disordering uncovers a conserved histidine which has been proposed to be involved in the cleavage of VP0. A comparison of the putative active sites in FMDV and poliovirus suggests a structural explanation for the sequence specificity of the cleavage reaction.     

Heterogeneity of a fluorescent tegument component in single pseudorabies virus virions and enveloped axonal assemblies

The molecular mechanisms responsible for long-distance, directional spread of alphaherpesvirus infections via axons of infected neurons are poorly understood. We describe the use of red and green fluorescent protein (GFP) fusions to capsid and tegument components, respectively, to visualize purified, single extracellular virions and axonal assemblies after pseudorabies virus (PRV) infection of cultured neurons. We observed heterogeneity in GFP fluorescence when GFP was fused to the tegument component VP22 in both single extracellular virions and discrete puncta in infected axons. This heterogeneity was observed in the presence or absence of a capsid structure detected by a fusion of monomeric red fluorescent protein to VP26. The similarity of the heterogeneous distribution of these fluorescent protein fusions in both purified virions and in axons suggested that tegument-capsid assembly and axonal targeting of viral components are linked. One possibility was that the assembly of extracellular and axonal particles containing the dually fluorescent fusion proteins occurred by the same process in the cell body. We tested this hypothesis by treating infected cultured neurons with brefeldin A, a potent inhibitor of herpesvirus maturation and secretion. Brefeldin A treatment disrupted the neuronal secretory pathway, affected fluorescent capsid and tegument transport in the cell body, and blocked subsequent entry into axons of capsid and tegument proteins. Electron microscopy demonstrated that in the absence of brefeldin A treatment, enveloped capsids entered axons, but in the presence of the inhibitor, unenveloped capsids accumulated in the cell body. These results support an assembly process in which PRV capsids acquire a membrane in the cell body prior to axonal entry and subsequent transport.     

Papillomavirus Assembly Requires Trimerization of the Major Capsid Protein by Disulfides between Two Highly Conserved Cysteines

We have used viruslike particles (VLPs) of human papillomaviruses to study the structure and assembly of the viral capsid. We demonstrate that mutation of either of two highly conserved cysteines of the major capsid protein L1 to serine completely prevents the assembly of VLPs but not of capsomers, whereas mutation of all other cysteines leaves VLP assembly unaffected. These two cysteines form intercapsomeric disulfides yielding an L1 trimer. Trimerization comprises about half of the L1 molecules in VLPs but all L1 molecules in complete virions. We suggest that trimerization of L1 is indispensable for the stabilization of intercapsomeric contacts in papillomavirus capsids.     

Lytic replication of Kaposi's sarcoma-associated herpesvirus results in the formation of multiple capsid species: isolation and molecular characterization of A, B, and C capsids from a gammaherpesvirus

Despite the discovery of Epstein-Barr virus more than 35 years ago, a thorough understanding of gammaherpesvirus capsid composition and structure has remained elusive. We approached this problem by purifying capsids from Kaposi's sarcoma-associated herpesvirus (KSHV), the only other known human gammaherpesvirus. The results from our biochemical and imaging analyses demonstrate that KSHV capsids possess a typical herpesvirus icosahedral capsid shell composed of four structural proteins. The hexameric and pentameric capsomers are composed of the major capsid protein (MCP) encoded by open reading frame 25. The heterotrimeric complexes, forming the capsid floor between the hexons and pentons, are each composed of one molecule of ORF62 and two molecules of ORF26. Each of these proteins has significant amino acid sequence homology to capsid proteins in alpha- and betaherpesviruses. In contrast, the fourth protein, ORF65, lacks significant sequence homology to its structural counterparts from the other subfamilies. Nevertheless, this small, basic, and highly antigenic protein decorates the surface of the capsids, as does, for example, the even smaller basic capsid protein VP26 of herpes simplex virus type 1. We have also found that, as with the alpha- and betaherpesviruses, lytic replication of KSHV leads to the formation of at least three capsid species, A, B, and C, with masses of approximately 200, 230, and 300 MDa, respectively. A capsids are empty, B capsids contain an inner array of a fifth structural protein, ORF17.5, and C capsids contain the viral genome.     

Identification, subviral localization, and functional characterization of the pseudorabies virus UL17 protein

Homologs of the UL17 gene of the alphaherpesvirus herpes simplex virus 1 (HSV-1) are conserved in all three subfamilies of herpesviruses. However, only the HSV-1 protein has so far been characterized in any detail. To analyze UL17 of pseudorabies virus (PrV) the complete 597-amino-acid protein was expressed in Escherichia coli and used for rabbit immunization. The antiserum recognized a 64-kDa protein in PrV-infected cell lysates and purified virions, identifying PrV UL17 as a structural virion component. In indirect immunofluorescence analyses of PrV-infected cells the protein was predominantly found in the nucleus. In electron microscopic studies after immunogold labeling of negatively stained purified virion preparations, UL17-specific label was detected on single, mostly damaged capsids, whereas complete virions and the majority of capsids were free of label. In ultrathin sections of infected cells, label was primarily found dispersed around scaffold-containing B-capsids, whereas on DNA-filled C-capsids it was located in the center. Empty intranuclear A-capsids were free of label, as were extracellular capsid-less L-particles. Functional characterization of PrV-DeltaUL17F, a deletion mutant lacking codons 23 to 444, demonstrated that cleavage of viral DNA into unit-length genomes was inhibited in the absence of UL17. In electron microscopic analyses of PrV-DeltaUL17F-infected RK13 cells, DNA-containing capsids were not detected, while numerous capsidless L-particles were observed. In summary, our data indicate that the PrV UL17 protein is an internal nucleocapsid protein necessary for DNA cleavage and packaging but suggest that the protein is not a prominent part of the tegument.     

Conformational changes of a viral capsid protein. Thermodynamic rationale for proteolytic regulation of bacteriophage T4 capsid expansion, co-operativity, and super-stabilization by soc binding.

We have used differential scanning calorimetry in conjunction with cryo-electron microscopy to investigate the conformational transitions undergone by the maturing capsid of phage T4. Its precursor shell is composed primarily of gp23 (521 residues): cleavage of gp23 to gp23* (residues 66 to 521) facilitates a concerted conformational change in which the particle expands substantially, and is greatly stabilized. We have now characterized the intermediate states of capsid maturation; namely, the cleaved/unexpanded, state, which denatures at tm = 60 degrees C, and the uncleaved/expanded state, for which tm = 70 degrees C. When compared with the precursor uncleaved/unexpanded state (tm = 65 degrees C), and the mature cleaved/expanded state (tm = 83 degrees C, if complete cleavage precedes expansion), it follows that expansion of the cleaved precursor (delta tm approximately +23 degrees C) is the major stabilizing event in capsid maturation. These observations also suggest an advantage conferred by capsid protein cleavage (some other phage capsids expand without cleavage): if the gp23-delta domains (residues 1 to 65) are not removed by proteolysis, they impede formation of the stablest possible bonding arrangement when expansion occurs, most likely by becoming trapped at the interface between neighboring subunits or capsomers. Icosahedral capsids denature at essentially the same temperatures as tubular polymorphic variants (polyheads) for the same state of the surface lattice. However, the thermal transitions of capsids are considerably sharper, i.e. more co-operative, than those of polyheads, which we attribute to capsids being closed, not open-ended. In both cases, binding of the accessory protein soc around the threefold sites on the outer surface of the expanded surface lattice results in a substantial further stabilization (delta tm = +5 degrees C). The interfaces between capsomers appear to be relatively weak points that are reinforced by clamp-like binding of soc. These results imply that the "triplex" proteins of other viruses (their structural counterparts of soc) are likely also to be involved in capsid stabilization. Cryo-electron microscopy was used to make conclusive interpretations of endotherms in terms of denaturation events. These data also revealed that the cleaved/unexpanded capsid has an angular polyhedral morphology and has a pronounced relief on its outer surface. Moreover, it is 14% smaller in linear dimensions than the cleaved/expanded capsid, and its shell is commensurately thicker.     

Formation of nucleoprotein complexes between polyoma empty capsides and DNA.

Purified polyoma empty capsids and polyoma type I DNA interact in a cell-free system to form nucleoprotein complexes. Complexes that consist of one, two, three, and four empty capsids per DNA molecule have been detected. Polyoma virions or capsomers do not react with added DNA to form such complexes.     

Structure of the Small Outer Capsid Protein, Soc: A Clamp for Stabilizing Capsids of T4-like Phages

Many viruses need to stabilize their capsid structure against DNA pressure and for survival in hostile environments. The 9-kDa outer capsid protein (Soc) of bacteriophage T4, which stabilizes the virus, attaches to the capsid during the final stage of maturation. There are 870 Soc molecules that act as a “glue” between neighboring hexameric capsomers, forming a “cage” that stabilizes the T4 capsid against extremes of pH and temperature. Here we report a 1.9 Å resolution crystal structure of Soc from the bacteriophage RB69, a close relative of T4. The RB69 crystal structure and a homology model of T4 Soc were fitted into the cryoelectron microscopy reconstruction of the T4 capsid. This established the region of Soc that interacts with the major capsid protein and suggested a mechanism, verified by extensive mutational and biochemical studies, for stabilization of the capsid in which the Soc trimers act as clamps between neighboring capsomers. The results demonstrate the factors involved in stabilizing not only the capsids of T4-like bacteriophages but also many other virus capsids.     

Alix regulates egress of hepatitis B virus naked capsid particles in an ESCRT-independent manner

Hepatitis B virus (HBV) is an enveloped DNA virus that exploits the endosomal sorting complexes required for transport (ESCRT) pathway for budding. In addition to infectious particles, HBV-replicating cells release non-enveloped (nucleo)capsids, but their functional implication and pathways of release are unclear. Here, we focused on the molecular mechanisms and found that the sole expression of the HBV core protein is sufficient for capsid release. Unexpectedly, released capsids are devoid of a detectable membrane bilayer, implicating a non-vesicular exocytosis process. Unlike virions, naked capsid budding does not require the ESCRT machinery. Rather, we identified Alix, a multifunctional protein with key roles in membrane biology, as a regulator of capsid budding. Ectopic overexpression of Alix enhanced capsid egress, while its depletion inhibited capsid release. Notably, the loss of Alix did not impair HBV production, furthermore indicating that virions and capsids use diverse export routes. By mapping of Alix domains responsible for its capsid release-mediating activity, its Bro1 domain was found to be required and sufficient. Alix binds to core via its Bro1 domain and retained its activity even if its ESCRT-III binding site is disrupted. Together, the boomerang-shaped Bro1 domain of Alix appears to escort capsids without ESCRT.