The value of an assessment of skeletal maturity in orthodontic diagnosis

The morphology and body composition of the Peruvian Cashinahua, a small unacculturated rain forest population numbering 206, has been analyzed. Measurements involve anthropometry, including skinfolds, and endosteal and periosteal breadths of the second metacarpals, taken from 135 handwrist radiographs. The analysis indicates that the Cashinahua are short and relatively heavy at all ages, and are morphologically similar to other comparable populations. The relatively high skinfolds suggest an adequate caloric intake and, when considered along with other studies, lead to the conclusion that these marginal, unacculturated farming groups are in a satisfactory state of nutritional adaptation. Increased contacts with outsiders may very well upset this balance, however.     

The measurement of skeletal maturity

A new approach to the measurement of skeletal maturity has been described. This was applied to the distal end of the femur in boys aged one month to four years. It is planned to extend this study to girls and to other ages and sites and to other bones in the knee area. The study began with the testing of reported indicators of skeletal maturity in respect of replicability, validity, discrimination and universality. As a result, seven qualitative graded indicators and three quantitative ratios were selected for further investigation. Maturity scores based on each qualitative indicator can be estimated using parameters from a simple probit analysis with chronological age as the independent variable. The statistical factors that influence the usefulness of these indicators have been discussed. The quantitative indicators investigated appear very useful as measures of maturity although some are redundant. The planned extension of the present study should allow the formulation of an appropriate model for the measurement of skeletal maturity by combining qualitative and quantitative data.     

A systematic assessment of statistics,risk factors,and underlying features involved in pancreatic cancer

Pancreatic cancer remains the fourth leading cause of cancer-related death in the world, and will continue to become the number two cause of cancer-related death unless a remarkable breakthrough is achieved. With a slim chance of early diagnosis, surgery can only provide a median survival of 17–23 months. The presence of a dense stroma makes this cancer resilient to chemotherapy, with very few potent inhibitors like nab paclitaxelin available that can work in combination with chemotherapeutic agents. Survival rates, on the one hand, lie at 8.5%. Variation in types of pancreatic cancer, on the other hand, makes it notoriously difficult to come up with a practical solution for the treatment of this disease. A deeper understanding of the root cause would be beneficial for diagnosis. Advancement in the field of genomics has made the identification of novel biomarkers relatively easier. By coupling this factor with the production of suitable inhibitors, testing in large numbers can be made possible with the help of cell lines. With the combined efforts of biological knowledge and modern technology, the cure for pancreatic cancer could be at hand.     

Relative dental maturity and associated skeletal maturity in prehistoric native Americans of the Ohio valley area

Estimation of age-at-death of subadults in prehistoric skeletal samples based on modern reference standards rests on a number of assumptions of which many are untestable. If these assumptions are not met error of unknown magnitude and direction will be introduced to the subadult age estimates. This situation suggests that an independent estimate or estimates of age-related features, free of most of the assumptions made when using modern reference standards may be useful supplements in evaluating the age of subadults in prehistoric samples. The present study provides an internally consistent, population-specific measure of maturity for prehistoric Ohio valley Native Americans based on the seriation of dental development that may be used as a supplement to age-estimation. The developing dentition of 581 subadults from eight Ohio valley prehistoric-protohistoric groups was seriated within and among individuals resulting in a sequence of tooth development and a sequence of individuals from least to most mature. Dental maturity stages or sorting categories were then defined based on exclusive, easily observable, and highly repeatable tooth-formation stages. Tooth eruption (into occlusion), bone lengths, and fusion of skeletal elements are summarized by dental maturity stage. This procedure provides maturity estimates for skeletal features ordered by dental maturity stages derived from the same sample thus making explicit the relationship between dental and skeletal maturity.     

Natural selection on age of maturity in shrimp

Summary Darwinian fitness with respect to the age of maturity () in stationary populations can be written as the product of two functions: pre- survival times the Fisherian reproductive value of an age (a just mature) individual. This reduces normalizing selection on to the maximization of a simple product,a twodimensional problem (Charnov in press). I apply this products theorem to in Pandalid shrimp and compare the results to previous analysis (Roff, 1986) of in fish.     

Ultrasonographic assessment of bone maturity in newborns

BACKGROUND: Traditionally, the bone maturity at birth has been estimated from the radiological presence and size of the ossified distal femoral epiphysis. This study was conducted in a search for a sonographic tool for the evaluation of neonatal bone maturity. METHODS: We examined sonographically 256 neonates within 24 h of birth. Gestational ages ranged from 36 to 42 weeks (mean: 39.4; median: 40). Birth weights ranged from 1,945 to 5,000 g (mean: 3,175; median: 3,180). The distal femoral epiphysis was imaged on the coronal plane sonogram of the distal femur with the knee at 90 degrees flexion and the distal femoral epiphysis maximal height was recorded. The acetabulum was imaged using Graf's method in the coronal plane image and the acetabular diameter recorded. RESULTS: It was found that plotting the distal femoral epiphysis against neonatal birth weight and gestational age provided a simple method for assessing the bone maturity. According to our study, a neonate can be regarded as bone maturity percentile X when plotting distal femoral epiphysis height or acetabulum diameter against birth weight and gestational age or when averaging the four readings. CONCLUSIONS: We suggest performing sonography of the distal femoral epiphysis as a bedside tool for the assessment of skeletal maturity in newborns.     

A rheological motor model for vertebrate skeletal muscle in due consideration of non-linearity

A rheological motor model that satisfies the major mechanical properties of the skeletal muscle is proposed. The model consists of two Maxwell elements and a Voigt element connected in parallel with each other and has a force generator in it. The model well explains the mechanical behavior in quick and slow recovery phases in the isometric contraction of the muscle and achieves a sufficient isotonic shortening speed. The energy liberation of the motor in isotonic contraction is calculated and a mechanism of control is proposed, which operates so as to decrease the dissipated energy by altering the weights of the elastic and viscous constants in Maxwell elements. And thereby it becomes possible for the motor to possess non-linearity in energy liberation and load-velocity relation alike in muscle. The model would be a base model to be utilized for analyzing the kinetics of human macrosystems and/or for modeling the human neuromuscular system of motion control.     

Human prenatal palatal closure related to skeletal maturity of the jaws

The purpose of the present study was to elucidate the stages of skeletal maturation of the maxilla and the mandible at the time of soft tissue palatal closure. Similar studies were not found in the literature. This investigation was based on maxillae and mandibles from 19 human embryos/fetuses selected by visual inspection of palatal structures, eight fetuses "just before palatal closure," and 11 fetuses "just after palatal closure." The findings are related to formerly described skeletal developmental stages in the maxilla, to stages in the symphysis menti region, and to development in the mandibular condylar region. The present study revealed that elevation of the palatal shelves takes place at a specific stage of maxillary skeletal maturity (stage Max III), at a time of mandibular development characterized by absence of condylar cartilage and by constancy in symphysis menti maturity (stage SM I). Knowledge of the normal sequence of prenatal skeletal development is considered essential for understanding the abnormal sequence of skeletal development.     

Mechanisms underlying the regulation of motor unit contraction in the skeletal muscle.

The control of movements is made posible thanks to the activity of motor units in skeletal muscles. In the present paper the influence of frequency and pattern of motoneuronal firing on the tension of contraction and the tension-time area is presented and discussed. The most resistant to fatigue slow-twitch motor units are low susceptible to changes in a pattern of impulses and therefore they are well prepared to participate in long-lasting movements at low but rather stable levels of tension. Moreover, their contraction is very effective and it is performed at a low metabolic charge. Fast-twitch units have lower resistance to fatigue and they have higher tension but they have high susceptibility to a pattern of pulses and their tension can be effectively regulated by an increase or a decrease in the interpulse interval. Therefore, fast motor units are specialized to participate in the regulation of the movement force. The existence of different functional groups of motor units in skeletal muscles enables the performance of different motor tasks very effectively and at possibly low metabolic costs.     

Integrated morphophysiological assessment of two methods for sperm selection in bovine embryo production in vitro

Extensive work was done regarding the ability of Swim up and Percoll gradient to select functional sperm for in vitro embryo production (IVP) systems. The aim of this work was to compare Swim up and Percoll as methods of sperm selection by ultrastructural, biochemical and functional studies. Frozen-thawed semen from two bulls (Experiments 1 and 2, respectively) were treated using Swim up or Percoll discontinuous gradients. Motility, sperm membrane ultrastructure, sperm proteins, in vitro embryo production (insemination doses, cleavage, embryo yield and quality) and embryo sex ratio were scored and compared. Electron transmission microscopy of outer sperm membranes showed higher (P<0.05) percentage of sperm with lost acrosomes in Percoll treated samples compared to Swim up. A differential protein pattern was also detected. When in vitro embryo production was performed, Percoll gradient produced higher (P<0.05) number of fertilizing doses (7.6 versus 5.9, Bull 1; 13.5 versus 7.8, Bull 2) and higher sperm motility (90% versus 76.6%, Bull 1; 81.7% versus 68.3%, Bull 2) than Swim up. The percentage of cleavage (Day 3) was similar in both treatment groups, whereas embryo production rate (Day 7) was higher (39.4% versus 30.2%, Bull 1; 38% versus 32.4%, Bull 2; P<0.05) when Percoll gradient was used. The percentage of hatched embryos (Day 11) and sex ratio did not differ. Total cell counting and embryo differential staining (inner cell mass and trophoblast cells) of Day 7 embryos showed that Percoll treated sperm produced better quality embryos compared to Swim up. We concluded that Percoll had a better performance selecting sperm and an enhanced capacity for embryo production when compared with the Swim up procedure; this could be attributed to a better acrosome exocytosis, associated to the absence of certain membrane proteins.     

A mathematical model for the validation of gene selection methods

Gene selection methods aim at determining biologically relevant subsets of genes in DNA microarray experiments. However, their assessment and validation represent a major difficulty since the subset of biologically relevant genes is usually unknown. To solve this problem a novel procedure for generating biologically plausible synthetic gene expression data is proposed. It is based on a proper mathematical model representing gene expression signatures and expression profiles through Boolean threshold functions. The results show that the proposed procedure can be successfully adopted to analyze the quality of statistical and machine learning-based gene selection algorithms.     

A comparison of methods for adaptive treatment selection

Traditionally drug development is generally divided into three phases which have different aims and objectives. Recently so-called adaptive seamless designs that allow combination of the objectives of different development phases into a single trial have gained much interest. Adaptive trials combining treatment selection typical for Phase II and confirmation of efficacy as in Phase III are referred to as adaptive seamless Phase II/III designs and are considered in this paper. We compared four methods for adaptive treatment selection, namely the classical Dunnett test, an adaptive version of the Dunnett test based on the conditional error approach, the combination test approach, and an approach within the classical group-sequential framework. The latter two approaches have only recently been published. In a simulation study we found that no one method dominates the others in terms of power apart from the adaptive Dunnett test that dominates the classical Dunnett by construction. Furthermore, scenarios under which one approach outperforms others are described.