Structural evidence for a functionally relevant second camphor binding site in P450cam: model for substrate entry into a P450 active site

P450cam has long served as a prototype for the cytochrome P450 (CYP) gene family. But, little is known about how substrate enters its active site pocket, and how access is achieved in a way that minimizes exposure of the reactive heme. We hypothesize that P450cam may first bind substrate transiently near the mobile F-G helix that covers the active site pocket. Such a two-step binding process is kinetically required if P450cam rarely populates an open conformation-as suggested by previous literature and the inability to obtain a crystal structure of P450cam in an open conformation. Such a mechanism would minimize exposure of the heme by allowing P450cam to stay in a closed conformation as long as possible, since only brief flexing into an open conformation would be required to allow substrate entry. To test this model, we have attempted to dock a second camphor molecule into the crystal structure of camphor-bound P450cam. The docking identified only one potential entry site pocket, a well-defined cavity on the F-helix side of the F-G flap, 16 A from the heme iron. Location of this entry site pocket is consistent with our NMR T1 relaxation-based measurements of distances for a camphor that binds in fast exchange (active site camphor is known to bind in slow exchange). Presence of a second camphor binding site is also confirmed with [(1)H-(13)C] HSQC titrations of (13)CH3-threonine labeled P450cam. To confirm that camphor can bind outside of the active site pocket, (13)CH3-S-pyridine was bound to the heme iron to physically block the active site, and to serve as an NMR chemical shift probe. Titration of this P450cam-pyridine complex confirms that camphor can bind to a site outside the active site pocket, with an estimated Kd of 43 microM. The two-site binding model that is proposed based on these data is analogous to that recently proposed for CYP3A4, and is consistent with recent crystal structures of P450cam bound to tethered-substrates, which force a partially opened conformation.     

On the three-dimensional structure and catalytic mechanism of triose phosphate isomerase

Triose phosphate isomerase is a dimeric enzyme of molecular mass 56 000 which catalyses the interconversion of dihydroxyacetone phosphate (DHAP) and D-glyceraldehyde-3-phosphate. The crystal structure of the enzyme from chicken muscle has been determined at a resolution of 2.5 A, and an independent determination of the structure of the yeast enzyme has just been completed at 3 A resolution. The conformation of the polypeptide chain is essentially identical in the two structures, and consists of an inner cylinder of eight strands of parallel beta-pleated sheet, with mostly helical segments connecting each strand. The active site is a pocket containing glutamic acid 165, which is believed to act as a base in the reaction. Crystallographic studies of the binding of DHAP to both the chicken and the yeast enzymes reveal a common mode of binding and suggest a mechanisms for catalysis involving polarization of the substrate carbonyl group.     

Structural characterization of the complex between alpha-naphthoflavone and human cytochrome P450 1B1

The atomic structure of human P450 1B1 was determined by x-ray crystallography to 2.7 Å resolution with α-naphthoflavone (ANF) bound in the active site cavity. Although the amino acid sequences of human P450s 1B1 and 1A2 have diverged significantly, both enzymes exhibit narrow active site cavities, which underlie similarities in their substrate profiles. Helix I residues adopt a relatively flat conformation in both enzymes, and a characteristic distortion of helix F places Phe²³¹ in 1B1 and Phe²²⁶ in 1A2 in similar positions for π-π stacking with ANF. ANF binds in a distinctly different orientation in P450 1B1 from that observed for 1A2. This reflects, in part, divergent conformations of the helix B′-C loop that are stabilized by different hydrogen-bonding interactions in the two enzymes. Additionally, differences between the two enzymes for other amino acids that line the edges of the cavity contribute to distinct orientations of ANF in the two active sites. Thus, the narrow cavity is conserved in both P450 subfamily 1A and P450 subfamily 1B with sequence divergence around the edges of the cavity that modify substrate and inhibitor binding. The conservation of these P450 1B1 active site amino acid residues across vertebrate species suggests that these structural features are conserved.     

Cytochrome P450 catalyzed nitric oxide synthesis: a theoretical study

Similar to nitric oxide synthase (NOS) cytochrome P450 isoforms (e.g. 3A and 4E) can produce nitric oxide from arginine. Although the active site of both proteins contains a protoporphyrin IX unit having an axial cystein ligand, their effectiveness in the synthesis of NO differs significantly. Now the molecular basis of this functional difference was investigated. A homology model for cytochrome P450 3A4 was refined and compared to the X-ray structure of iNOS. We found the active site of iNOS to be more readily accessible for the substrate than that of P450. Docking calculations were performed using the Monte Carlo conformational analysis technique on all internal and external degrees of freedom of arginine and active site residues as well. The lowest energy conformation of the cytochrome P450 3A4-substrate complex was compared to the high resolution X-ray structure of the iNOS-arginine complex. Comparison of substrate orientations revealed that arginine binds in a similar conformation in both enzymes. In contrast to iNOS we found, however, that in P450 partially negative propionate side chains of protoporphyrin IX are located on the opposite side of the heme plane. As a result of this and the absence of other negatively charged residues the distal (substrate binding) side of P450 should be less negative than that of NOS and therefore its affinity toward the partially positive arginine is reduced. Comparison of molecular electrostatic potentials calculated within the active site of the proteins supports this proposal. Reduced affinity in combination with limited substrate access might be responsible for the less effective NO synthesis of cytochrome P450 observed experimentally.     

The "open" and "closed" structures of the type-C inorganic pyrophosphatases from Bacillus subtilis and Streptococcus gordonii.

Recently, a new class of soluble inorganic pyrophosphatase (type-C PPase) has been described that is not homologous in amino acid sequence or kinetic properties to the well-studied PPases (types A and B) found in many organisms from bacteria to humans and thought to be essential to the cell. Structural studies of the type-C PPases from Streptococcus gordonii and Bacillus subtilis reveal a homodimeric structure, with each polypeptide folding into two domains joined by a flexible hinge. The active site, formed at the interface between the N and C-terminal domains, binds two manganese ions approximately 3.6 A apart in a conformation resembling binuclear metal centres found in other hydrolytic enzymes. An activated water molecule bridging the two metal ions is likely poised for nucleophilic attack of the substrate. Importantly, the S. gordonii and B. subtilis enzymes have crystallised in strikingly different conformations. In both subunits of the S. gordonii crystal structure (1.5 A resolution) the C-terminal domain is positioned such that the active site is occluded, with a sulphate ion bound in the active site. In contrast, in the B. subtilis structure (3.0 A resolution) the C-terminal domain is rotated by about 90 degrees, leaving the active site wide open and accessible for substrate binding.     

Crystal structure of human tryptophanyl-tRNA synthetase catalytic fragment: insights into substrate recognition, tRNA binding, and angiogenesis activity

Human tryptophanyl-tRNA synthetase (hTrpRS) produces a full-length and three N terminus-truncated forms through alternative splicing and proteolysis. The shortest fragment that contains the aminoacylation catalytic fragment (T2-hTrpRS) exhibits the most potent angiostatic activity. We report here the crystal structure of T2-hTrpRS at 2.5 A resolution, which was solved using the multi-wavelength anomalous diffraction method. T2-hTrpRS shares a very low sequence homology of 22% with Bacillus stearothermophilus TrpRS (bTrpRS); however, their overall structures are strikingly similar. Structural comparison of T2-hTrpRS with bTrpRS reveals substantial structural differences in the substrate-binding pocket and at the entrance to the pocket that play important roles in substrate binding and tRNA binding. T2-hTrpRS has a wide opening to the active site and adopts a compact conformation similar to the closed conformation of bTrpRS. These results suggest that mammalian and bacterial TrpRSs might use different mechanisms to recognize the substrate. Modeling studies indicate that tRNA binds with the dimeric enzyme and interacts primarily with the connective polypeptide 1 of hTrpRS via its acceptor arm and the alpha-helical domain of hTrpRS via its anticodon loop. Our results also suggest that the angiostatic activity is likely located at the alpha-helical domain, which resembles the short chain cytokines.     

Phage display and crystallographic analysis reveals potential substrate/binding site interactions in the protein secretion chaperone CsaA from Agrobacterium tumefaciens

The protein CsaA has been proposed to function as a protein secretion chaperone in bacteria that lack the Sec-dependent protein-targeting chaperone SecB. CsaA is a homodimer with two putative substrate-binding pockets, one in each monomer. To test the hypothesis that these cavities are indeed substrate-binding sites able to interact with other polypeptide chains, we selected a peptide that bound to CsaA from a random peptide library displayed on phage. Presented here is the structure of CsaA from Agrobacterium tumefaciens (AtCsaA) solved in the presence and absence of the selected peptide. To promote co-crystallization, the sequence for this peptide was genetically fused to the amino-terminus of AtCsaA. The resulting 1.65 Å resolution crystal structure reveals that the tethered peptide from one AtCsaA molecule binds to the proposed substrate-binding pocket of a symmetry-related molecule possibly mimicking the interaction between a pre-protein substrate and CsaA. The structure shows that the peptide lies in an extended conformation with alanine, proline and glutamine side chains pointing into the binding pocket. The peptide interacts with the atoms of the AtCsaA-binding pocket via seven direct hydrogen bonds. The side chain of a conserved pocket residue, Arg76, has an “up” conformation when the CsaA-binding site is empty and a “down” conformation when the CsaA-binding site is occupied, suggesting that this residue may function to stabilize the peptide in the binding cavity. The presented aggregation assays, phage-display analysis and structural analysis are consistent with AtCsaA being a general chaperone. The properties of the proposed CsaA-binding pocket/peptide interactions are compared to those from other structurally characterized molecular chaperones.     

Functional interpretation and structural insights of Arabidopsis lyrata cytochrome P450 CYP71A13 involved in auxin synthesis

Cytochrome P450 CYP71A13 of Arabidopsis lyrata is a heme protein involved in biosynthesis of indole-3-acetonitrile which leads to the formation of indolyl-3-acetic acid. It catalyzes a unique reaction: formation of a carbon-nitrogen triple bond and dehydration of indolyl-3-acetaldoxime. Homology model of this 57 kDa polypeptide revealed that the heme existed between H-helix and J- helix in the hydrophobic pocket, although both helixes are involved in catalytic activity, where Gly305 and Thr308, 311 of H- helix were involved in its stabilization. The substrate indole-3-acetaldoxime was tightly fitted into the substrate pocket with the aromatic ring being surrounded by amino acid residues creating a hydrophobic environment. The smaller size of the substrate binding pocket in cytochrome P450 CYP71A13 was due to the bulkiness of the two amino acid residues Phe182 and Trp315 pointing into the substrate binding cavity. The apparent role of the heme in cytochrome P450 CYP71A13 was to tether the substrate in the catalysis by indole-3-acetaldoxime dehydratase. Since the crystal structure of cytochrome P450 CYP71A13 has not yet been solved, the modeled structure revealed mechanism of substrate recognition and catalysis.     

Nucleoside binding site of herpes simplex type 1 thymidine kinase analyzed by X-ray crystallography

The crystal structures of the full-length Herpes simplex virus type 1 thymidine kinase in its unligated form and in a complex with an adenine analogue have been determined at 1.9 A resolution. The unligated enzyme contains four water molecules in the thymidine pocket and reveals a small induced fit on substrate binding. The structure of the ligated enzyme shows for the first time a bound adenine analogue after numerous complexes with thymine and guanine analogues have been reported. The adenine analogue constitutes a new lead compound for enzyme-prodrug gene therapy. In addition, the structure of mutant Q125N modifying the binding site of the natural substrate thymidine in complex with this substrate has been established at 2.5 A resolution. It reveals that neither the binding mode of thymidine nor the polypeptide backbone conformation is altered, except that the two major hydrogen bonds to thymidine are replaced by a single water-mediated hydrogen bond, which improves the relative acceptance of the prodrugs aciclovir and ganciclovir compared with the natural substrate. Accordingly, the mutant structure represents a first step toward improving the virus-directed enzyme-prodrug gene therapy by enzyme engineering.     

High resolution crystal structures of free thrombin in the presence of K(+) reveal the molecular basis of monovalent cation selectivity and an inactive slow form

Structural biology has recently advanced our understanding of the molecular mechanisms of activation and selectivity in monovalent cation activated enzymes. Here we report a 1.9 Angstrom resolution crystal structure of free thrombin, a Na(+) selective enzyme, in the presence of KCl. There are two molecules in the asymmetric unit, one with the cation site bound to K(+) and the other with this site free. The K(+)-bound form shows key differences compared with the Na(+)-bound structure that explain the different kinetics of activation. The cation-free form, on the other hand, assumes a conformation where the monovalent cation binding site is completely disordered, the S1 pocket is inaccessible to substrate and binding to exosite I is compromised by an unprecedented >20 Angstrom shift in the position of the autolysis loop. This form, named S(*), corresponds to the inactive Na(+)-free slow form identified by early kinetic studies. A simple model of thrombin allostery that incorporates the contribution of S(*) is proposed.     

Regio- and Stereospecificity of Filipin Hydroxylation Sites Revealed by Crystal Structures of Cytochrome P450 105P1 and 105D6 from Streptomyces avermitilis

The polyene macrolide antibiotic filipin is widely used as a probe for cholesterol and a diagnostic tool for type C Niemann-Pick disease. Two position-specific P450 enzymes are involved in the post-polyketide modification of filipin during its biosynthesis, thereby providing molecular diversity to the “filipin complex.” CYP105P1 and CYP105D6 from Streptomyces avermitilis, despite their high sequence similarities, catalyze filipin hydroxylation at different positions, C26 and C1′, respectively. Here, we determined the crystal structure of the CYP105P1-filipin I complex. The distal pocket of CYP105P1 has the second largest size among P450 hydroxylases that act on macrolide substrates. Compared with previously determined substrate-free structures, the FG helices showed significant closing motion on substrate binding. The long BC loop region adopts a unique extended conformation without a B′ helix. The binding site is essentially hydrophobic, but numerous water molecules are involved in recognizing the polyol side of the substrate. Therefore, the distal pocket of CYP105P1 provides a specific environment for the large filipin substrate to bind with its pro-S side of position C26 directed toward the heme iron. The ligand-free CYP105D6 structure was also determined. A small sub-pocket accommodating the long alkyl side chain of filipin I was observed in the CYP105P1 structure but was absent in the CYP105D6 structure, indicating that filipin cannot bind to CYP105D6 with a similar orientation due to steric hindrance. This observation can explain the strict regiospecificity of these enzymes.     

Monooxygenation by a thermophilic cytochrome P450 via direct electron donation from NADH

The catalysis of cytochrome P450s requires two-electron donation for the activation of an oxygen molecule. Here, we report the enzymatic catalysis of cytochrome P450, CYP119A2 (P450st), from a thermoacidophilic crenarchaeon, Sulfolobus tokodaii strain 7, with NAD(P)H as an electron donor and no redox partners and the crystallographic analysis of P450st at high resolution. P450st can catalyse styrene epoxidation with either NADH or NADPH as an electron donor. The P450st reaction with NADH exhibited a sequential mechanism. X-ray crystallography at a resolution of 1.94 ? revealed a sufficiently large heme pocket for NAD(P)H binding and a novel contiguous channel from the active site to bulk solvent in the distal heme pocket. The narrow channel may transfer protons or water to the heme pocket even when a bulky compound, such as NAD(P)H, binds in the pocket. In addition, the F/G loop region (Leu151-Glu156), located around the substrate channel, was deleted in the mutant and constructed to improve the accessibility of NAD(P)H to the heme pocket. Kinetic properties of the Δ151-156 mutant were compared with those of the wild-type P450st. The K(m) value of the mutant was about 2 times lower than that of the wild-type. The results indicated that NAD(P)H could provide the electrons for P450st within the heme pocket.     

Molecular Modeling of Cytochrome P450 2B1: Mode of Membrane Insertion and Substrate Specificity

A molecular model of a mammalian membrane-bound cytochrome P450, rat P450 2B1, was constructed in order to elucidate its mode of attachment to the endoplasmic reticulum and the structural basis of substrate specificity. The model was primarily derived from the structure of P450BM-3, which as a class II P450 is the most functionally similar P450 of known structure. However, model development was also guided by the conserved core regions of P450cam and P450terp. To optimally align the P450 2B1 and P450BM-3 sequences, multiple alignment was performed using sequences of five P450s in the II family, followed by minor adjustments on the basis of secondary structure predictions. The resulting P450 2B1 homology model structure was refined by molecular dynamics heating, equilibration, simulation, and energy minimization. The model suggests that the F–G loop serves as both a hydrophobic membrane anchor and entrance channel for hydrophobic substrates from the membrane to the P450 active site. To assess the mode of substrate binding, benzphetamine, testosterone, and benzo[a]pyrene were docked into the active site. The hydrophobic substrate-binding pocket is consistent with the preferences of this P450 toward hydrophobic substrates, while the presence of an acidic Glu-105 in this pocket is consistent with the preference of this P450 for the cationic substrate benzphetamine. This model is thus consistent with several known experimental properties of this P450, such as membrane attachment and substrate selectivity.     

Structure of microsomal cytochrome P450 2B4 complexed with the antifungal drug bifonazole: insight into P450 conformational plasticity and membrane interaction

To better understand ligand-induced structural transitions in cytochrome P450 2B4, protein-ligand interactions were investigated using a bulky inhibitor. Bifonazole, a broad spectrum antifungal agent, inhibits monooxygenase activity and induces a type II binding spectrum in 2B4dH(H226Y), a modified enzyme previously crystallized in the presence of 4-(4-chlorophenyl)imidazole (CPI). Isothermal titration calorimetry and tryptophan fluorescence quenching indicate no significant burial of protein apolar surface nor altered accessibility of Trp-121 upon bifonazole binding, in contrast to recent results with CPI. A 2.3 A crystal structure of 2B4-bifonazole reveals a novel open conformation with ligand bound in the active site, which is significantly different from either the U-shaped cleft of ligand-free 2B4 or the small active site pocket of 2B4-CPI. The O-shaped active site cleft of 2B4-bifonazole is widely open in the middle but narrow at the top. A bifonazole molecule occupies the bottom of the active site cleft, where helix I is bent approximately 15 degrees to accommodate the bulky ligand. The structure also defines unanticipated interactions between helix C residues and bifonazole, suggesting an important role of helix C in azole recognition by mammalian P450s. Comparison of the ligand-free 2B4 structure, the 2B4-CPI structure, and the 2B4-bifonazole structure identifies structurally plastic regions that undergo correlated conformational changes in response to ligand binding. The most plastic regions are putative membrane-binding motifs involved in substrate access or substrate binding. The results allow us to model the membrane-associated state of P450 and provide insight into how lipophilic substrates access the buried active site.     

The structure of the exo-beta-(1,3)-glucanase from Candida albicans in native and bound forms: relationship between a pocket and groove in family 5 glycosyl hydrolases

A group of fungal exo-beta-(1,3)-glucanases, including that from the human pathogen Candida albicans (Exg), belong to glycosyl hydrolase family 5 that also includes many bacterial cellulases (endo-beta-1, 4-glucanases). Family members, despite wide sequence variations, share a common mechanism and are characterised by possessing eight invariant residues making up the active site. These include two glutamate residues acting as nucleophile and acid/base, respectively. Exg is an abundant secreted enzyme possessing both hydrolase and transferase activity consistent with a role in cell wall glucan metabolism and possibly morphogenesis. The structures of Exg in both free and inhibited forms have been determined to 1.9 A resolution. A distorted (beta/alpha)8 barrel structure accommodates an active site which is located within a deep pocket, formed when extended loop regions close off a cellulase-like groove. Structural analysis of a covalently bound mechanism-based inhibitor (2-fluoroglucosylpyranoside) and of a transition-state analogue (castanospermine) has identified the binding interactions at the -1 glucose binding site. In particular the carboxylate of Glu27 serves a dominant hydrogen-bonding role. Access by a 1,3-glucan chain to the pocket in Exg can be understood in terms of a change in conformation of the terminal glucose residue from chair to twisted boat. The geometry of the pocket is not, however, well suited for cleavage of 1,4-glycosidic linkages. A second glucose site was identified at the entrance to the pocket, sandwiched between two antiparallel phenylalanine side-chains. This aromatic entrance-way must not only direct substrate into the pocket but also may act as a clamp for an acceptor molecule participating in the transfer reaction.     

Crystal structures of substrate-free and nitrosyl cytochrome p450cin: implications for o(2) activation

The crystal structure of the P450cin substrate-bound nitric oxide complex and the substrate-free form have been determined revealing a substrate-free structure that adopts an open conformation relative to the substrate-bound structure. The region of the I helix that forms part of the O(2) binding pocket shifts from an α helix in the substrate-free form to a π helix in the substrate-bound form. Unique to P450cin is an active site residue, Asn242, in the I helix that H-bonds with the substrate. In most other P450s this residue is a Thr and plays an important role in O(2) activation by participating in an H-bonding network required for O(2) activation. The π/α I helix transition results in the carbonyl O atom of Gly238 moving in to form an H-bond with the water/hydroxide ligand in the substrate-free form. The corresponding residue, Gly248, in the substrate-free P450cam structure experiences a similar motion. Most significantly, in the oxy-P450cam complex Gly248 adopts a position midway between the substrate-free and -bound states. A comparison between these P450cam and the new P450cin structures provides insights into differences in how the two P450s activate O(2). The structure of P450cin complexed with nitric oxide, a close mimic of the O(2) complex, shows that Gly238 is likely to form tighter interactions with ligands than the corresponding Gly248 in P450cam. Having a close interaction between an H-bond acceptor, the Gly238 carbonyl O atom, and the distal oxygen atom of O(2) will promote protonation and hence further reduction of the oxy complex to the hydroperoxy intermediate resulting in heterolytic cleavage of the peroxide O-O bond and formation of the active ferryl intermediate required for substrate hydroxylation.     

A potent peptidomimetic inhibitor of botulinum neurotoxin serotype A has a very different conformation than SNAP-25 substrate

Botulinum neurotoxin serotype A is the most lethal of all known toxins. Here, we report the crystal structure, along with SAR data, of the zinc metalloprotease domain of BoNT/A bound to a potent peptidomimetic inhibitor (K(i)=41 nM) that resembles the local sequence of the SNAP-25 substrate. Surprisingly, the inhibitor adopts a helical conformation around the cleavage site, in contrast to the extended conformation of the native substrate. The backbone of the inhibitor's P1 residue displaces the putative catalytic water molecule and concomitantly interacts with the "proton shuttle" E224. This mechanism of inhibition is aided by residue contacts in the conserved S1' pocket of the substrate binding cleft and by the induction of new hydrophobic pockets, which are not present in the apo form, especially for the P2' residue of the inhibitor. Our inhibitor is specific for BoNT/A as it does not inhibit other BoNT serotypes or thermolysin.     

Refined structure of alkaline phosphatase from Escherichia coli at 2.8 A resolution

The structure of alkaline phosphatase from Escherichia coli has been determined to 2.8 A resolution. The multiple isomorphous replacement electron density map of the dimer at 3.4 A was substantially improved by molecular symmetry averaging and solvent flattening. From these maps, polypeptide chains of the dimer were built using the published amino acid sequence. Stereochemically restrained least-squares refinement of this model against native data, starting with 3.4 A data and extending in steps to 2.8 A resolution, proceeded to a final overall crystallographic R factor of 0.256. Alkaline phosphatase-phosphomonoester hydrolase (EC 3.1.3.1) is a metalloenzyme that forms an isologous dimer with two reactive centers 32 A apart. The topology of the polypeptide fold of the subunit is of the alpha/beta class of proteins. Despite the similarities in the overall alpha/beta fold with other proteins, alkaline phosphatase does not have a characteristic binding cleft formed at the carboxyl end of the parallel sheet, but rather an active pocket that contains a cluster of three functional metal sites located off the plane of the central ten-stranded sheet. This active pocket is located near the carboxyl ends of four strands and the amino end of the antiparallel strand, between the plane of the sheet and two helices on the same side. Alkaline phosphatase is a non-specific phosphomonoesterase that hydrolyzes small phosphomonoesters as well as the phosphate termini of DNA. The accessibility calculations based on the refined co-ordinates of the enzyme show that the active pocket barely accommodates inorganic phosphate. Thus, the alcoholic or phenolic portion of the substrate would have to be exposed on the surface of the enzyme. Two metal sites, M1 and M2, 3.9 A apart, are occupied by zinc. The third site, M3, 5 A from site M2 and 7 A from site M1, is occupied by magnesium or, in the absence of magnesium, by zinc. As with other zinc-containing enzymes, histidine residues are ligands to zinc site M1 (three) and to zinc site M2 (one). Ligand assignment and metal preference indicate that the crystallographically found metal sites M1, M2 and M3 correspond to the spectroscopically deduced metal sites A, B and C, respectively. Arsenate, a product analog and enzyme inhibitor, binds between Ser102 and zinc sites M1 and M2. The position of the guanidinium group of Arg 166 is within hydrogen-bonding distance from the arsenate site.(ABSTRACT TRUNCATED AT 400 WORDS)     

Ketoconazole-induced conformational changes in the active site of cytochrome P450eryF

The azole-based P450 inhibitor ketoconazole is used to treat fungal infections and functions by blocking ergosterol biosynthesis in yeast. Ketoconazole binds to mammalian P450 enzymes and this can result in drug-drug interactions and lead to liver damage. To identify protein-drug interactions that contribute to binding specificity and affinity, we determined the crystal structure of ketoconazole complexed with P450eryF. In the P450eryF/ketoconazole structure, the azole moiety and nearby rings of ketoconzole are positioned in the active site similar to the substrate, 6-deoxyerythronolide B, with the azole nitrogen atom coordinated to the heme iron atom. The remainder of the ketoconazole molecule extends into the active-site pocket, which is occupied by water in the substrate complex. Binding of ketoconazole led to unexpected conformational changes in the I-helix. The I-helix cleft near the active site has collapsed with a helical pitch of 5.4 A compared to 6.6 A in the substrate complex. P450eryF/ketoconazole crystals soaked in 6-deoxyerythronolide B to exchange ligands exhibit a structure identical with that of the original P450eryF/substrate complex, with the I-helix cleft restored to a pitch of 6.6 A. These findings indicate that the I-helix region of P450eryF is flexible and can adopt multiple conformations. An improved understanding of the flexibility of the active-site region of cytochrome P450 enzymes is important to gain insight into determinants of ligand binding/specificity as well as to evaluate models for catalytic mechanism based on static crystal structures.     

X-ray crystal structure of the complex of human leukocyte elastase (PMN elastase) and the third domain of the turkey ovomucoid inhibitor.

Orthorhombic crystals diffracting beyond 1.7 A resolution, have been grown from the stoichiometric complex formed between human leukocyte elastase (HLE) and the third domain of turkey ovomucoid inhibitor (OMTKY3). The crystal and molecular structure has been determined with the multiple isomorphous replacement technique. The complex has been modeled using the known structure of OMTKY3 and partial sequence information for HLE, and has been refined. The current crystallographic R-value is 0.21 for reflections from 25 to 1.8 A resolution. HLE shows the characteristic polypeptide fold of trypsin-like serine proteinases and consists of 218 amino acid residues. However, several loop segments, mainly arranged around the substrate binding site, have unique conformations. The largest deviations from the other vertebrate proteinases of known spatial structure are around Cys168. The specificity pocket is constricted by Val190, Val216 and Asp226 to preferentially accommodate medium sized hydrophobic amino acids at P1. Seven residues of the OMTKY3-binding segment are in specific contact with HLE. This interaction and geometry around the reactive site are similar as observed in other complexes. It is the first serine proteinase glycoprotein analysed, having two sugar chains attached to Asn159 and to residue 109.