Mos1-mediated insertional mutagenesis in Caenorhabditis elegans

We describe a protocol for mutating genes in the nematode Caenorhabditis elegans using the Mos1 transposon of Drosophila mauritiana. Mutated genes containing a Mos1 insertion are molecularly tagged by this heterologous transposable element. Mos1 insertions can therefore be identified in as little as 3 weeks using only basic molecular biology techniques. Mutagenic efficiency of Mos1 is tenfold lower than classical chemical mutagens. However, the ease and speed with which mutagenic insertions can be mapped compares favorably with the vast amount of work involved in classical genetic mapping. Therefore, Mos1 could be the tool of choice when screening procedures are efficient. In addition, Mos1 mutagenesis can greatly simplify the mapping of mutations that exhibit low penetrance, subtle or synthetic phenotypes. The recent development of targeted engineering of C. elegans loci carrying Mos1 insertions further increases the attractiveness of Mos1-mediated mutagenesis.     

Targeted engineering of the Caenorhabditis elegans genome following Mos1-triggered chromosomal breaks

The Drosophila element Mos1 is a class II transposon, which moves by a 'cut-and-paste' mechanism and can be experimentally mobilized in the Caenorhabditis elegans germ line. Here, we triggered the excision of identified Mos1 insertions to create chromosomal breaks at given sites and further manipulate the broken loci. Double-strand break (DSB) repair could be achieved by gene conversion using a transgene containing sequences homologous to the broken chromosomal region as a repair template. Consequently, mutations engineered in the transgene could be copied to a specific locus at high frequency. This pathway was further characterized to develop an efficient tool--called MosTIC--to manipulate the C. elegans genome. Analysis of DSB repair during MosTIC experiments demonstrated that DSBs could also be sealed by end-joining in the germ line, independently from the evolutionarily conserved Ku80 and ligase IV factors. In conjunction with a publicly available Mos1 insertion library currently being generated, MosTIC will provide a general tool to customize the C. elegans genome.     

A semi-automated high-throughput approach to the generation of transposon insertion mutants in the nematode Caenorhabditis elegans

The generation of a large collection of defined transposon insertion mutants is of general interest to the Caenorhabditis elegans research community and has been supported by the European Union. We describe here a semi-automated high-throughput method for mutant production and screening, using the heterologous transposon Mos1. The procedure allows routine culture of several thousand independent nematode strains in parallel for multiple generations before stereotyped molecular analyses. Using this method, we have already generated >17500 individual strains carrying Mos1 insertions. It could be easily adapted to forward and reverse genetic screens and may influence researchers faced with making a choice of model organism.     

Shotgun cloning of transposon insertions in the genome of Caenorhabditis elegans

We present a strategy to identify and map large numbers of transposon insertions in the genome of Caenorhabditis elegans. Our approach makes use of the mutator strain mut-7, which has germline-transposition activity of the Tc1/mariner family of transposons, a display protocol to detect new transposon insertions, and the availability of the genomic sequence of C. elegans. From a pilot insertional mutagenesis screen, we have obtained 351 new Tc1 transposons inserted in or near 219 predicted C. elegans genes. The strategy presented provides an approach to isolate insertions of natural transposable elements in many C. elegans genes and to create a large-scale collection of C. elegans mutants.     

Manipulating the <Emphasis Type="Italic">Caenorhabditis elegans</Emphasis> genome using <Emphasis Type="Italic">mariner</Emphasis> transposons

Tc1, one of the founding members of the Tc1/mariner transposon superfamily, was identified in the nematode Caenorhabditis elegans more than 25 years ago. Over the years, Tc1 and other endogenous mariner transposons became valuable tools for mutagenesis and targeted gene inactivation in C. elegans. However, transposition is naturally repressed in the C. elegans germline by an RNAi-like mechanism, necessitating the use of mutant strains in which transposition was globally derepressed, which causes drawbacks such as uncontrolled proliferation of the transposons in the genome and accumulation of background mutations. The more recent mobilization of the Drosophila mariner transposon Mos1 in the C. elegans germline circumvented the problems inherent to endogenous transposons. Mos1 transposition strictly depends on the expression of the Mos transposase, which can be controlled in the germline using inducible promoters. First, Mos1 can be used for insertional mutagenesis. The mobilization of Mos1 copies present on an extrachromosomal array results in the generation of a small number of Mos1 genomic insertions that can be rapidly cloned by inverse PCR. Second, Mos1 insertions can be used for genome engineering. Triggering the excision of a genomic Mos1 insertion causes a chromosomal break, which can be repaired by transgene-instructed gene conversion. This process is used to introduce specific changes in a given gene, such as point mutations, deletions or insertions of a tag, and to create single-copy transgenes.     

MosSCI and gateway compatible plasmid toolkit for constitutive and inducible expression of transgenes in the C. elegans germline

Here we describe a toolkit for the production of fluorescently tagged proteins in the C. elegans germline and early embryo using Mos1-mediated single copy insertion (MosSCI) transformation. We have generated promoter and 3'UTR fusions to sequences of different fluorescent proteins yielding constructs for germline expression that are compatible with MosSCI MultiSite Gateway vectors. These vectors allow tagged transgene constructs to be inserted as single copies into known sites in the C. elegans genome using MosSCI. We also show that two C. elegans heat shock promoters (Phsp-16.2 and Phsp-16.41) can be used to induce transgene expression in the germline when inserted via MosSCI transformation. This flexible set of new vectors, available to the research community in a plasmid repository, should facilitate research focused on the C. elegans germline and early embryo.     

Insertion and Excision of the Transposable Element Mariner in Drosophila

The transposable element mariner is active in both germline and somatic cells of Drosophila mauritiana. Activity of the element is greatly enhanced in the presence of Mos1, a genetic factor identified as an autonomous copy of mariner. A strain of D. mauritiana containing Mos1 and other copies of mariner was used to initiate a screen for visible mutations. More than 20 mutations were obtained, including alleles of white, yellow and vermilion. Six alleles were characterized at the molecular level, and all were found to contain a mariner element inserted into the affected gene. Four insertions into the white locus were sequenced to determine the exact site of insertion of mariner. There appears to be little sequence specificity requirement for mariner insertion, other than an absolute requirement for the dinucleotide TA, which is duplicated upon insertion. Sequences of phenotypically wild-type germline and somatic revertants obtained from various white alleles, including the previously isolated wpch allele, were obtained using the polymerase chain reaction. Mariner excision is imprecise in both germline and soma, and the most frequent excision events are the same in the two tissues. Mutant derivatives of wpch were also studied, and were found to exhibit a wide range of molecular structures and phenotypes.     

Site-selected transposon mutagenesis at the hcf106 locus in maize.

The High chlorophyll fluorescence106 (Hcf106) gene in maize is required for chloroplast membrane biogenesis, and the hcf106-mum1 allele is caused by the insertion of a Robertson's Mutator Mu1 element into the promoter of the gene. Seedlings homozygous for hcf106-mum1 are pale green and die 3 weeks after germination, but only in the presence of Mutator activity conferred by active, autonomous Mu regulatory transposons elsewhere in the genome. When Mutator activity is lost, the mutant phenotype is suppressed, and homozygous plants have an almost wild-type phenotype. To isolate derivative alleles at the hcf106 locus that no longer require Mutator activity for phenotypic expression, we have developed a method for site-selected transposon mutagenesis in maize. This procedure, first described for Caenorhabditis elegans and Drosophila, involves using polymerase chain reaction (PCR) to screen pools of individuals for insertions and deletions in genes of known sequence. Pools of seedlings segregating for the progenitor allele hcf106-mum1 were screened by PCR for insertions and deletions associated with Robertson's Mutator. In a 360-bp target region, two new insertions and one deletion were identified in only 700 Mu-active gametes screened. One of the insertions was in the progenitor hcf106-mum1 allele and the other was in the wild-type allele, but all three new alleles were found to have break-points at the same nucleotide in the first intron. Unlike the hcf-106-mum1 progenitor allele, the deletion and one of the insertions conferred pale green seedling lethal phenotypes in the absence of mutator activity. However, the second insertion had a weak, viable phenotype under these conditions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Ty1 Transposition in Saccharomyces Cerevisiae Is Nonrandom

A large collection of Ty1 insertions in the URA3 and LYS2 loci was generated using a GAL1-Ty1 fusion to augment the transposition frequency. The sites of insertion of most of these Ty elements were sequenced. There appears to be a gradient of frequency of insertion from the 5' end (highest frequency) to the 3' end (lowest frequency) of both loci. In addition we observed hotspots for transposition. Twelve of the 82 Ty1 insertions in the URA3 locus were inserted in exactly the same site. Hotspots were also observed in the LYS2 locus. All hotspots were in the transcribed part of the genes. Alignment of the sites of insertion and of the neighboring sequences only reveals very weak sequence similarities.     

Yersinia pestis kills Caenorhabditis elegans by a biofilm-independent process that involves novel virulence factors

It is known that Yersinia pestis kills Caenorhabditis elegans by a biofilm-dependent mechanism that is similar to the mechanism used by the pathogen to block food intake in the flea vector. Using Y. pestis KIM 5, which lacks the genes that are required for biofilm formation, we show that Y. pestis can kill C. elegans by a biofilm-independent mechanism that correlates with the accumulation of the pathogen in the intestine. We used this novel Y. pestis-C. elegans pathogenesis system to show that previously known and unknown virulence-related genes are required for full virulence in C. elegans. Six Y. pestis mutants with insertions in genes that are not related to virulence before were isolated using C. elegans. One of the six mutants carried an insertion in a novel virulence gene and showed significantly reduced virulence in a mouse model of Y. pestis pathogenesis. Our results indicate that the Y. pestis-C. elegans pathogenesis system that is described here can be used to identify and study previously uncharacterized Y. pestis gene products required for virulence in mammalian systems.     

Cryptococcus neoformans virulence gene discovery through insertional mutagenesis

Insertional mutagenesis was applied to Cryptococcus neoformans to identify genes associated with virulence attributes. Using biolistic transformation, we generated 4,300 nourseothricin (NAT)-resistant strains, of which 590 exhibited stable resistance. We focused on mutants with defects in established virulence factors and identified two with reduced growth at 37 degrees C, four with reduced production of the antioxidant pigment melanin, and two with an increased sensitivity to nitric oxide (NO). The NAT insertion and mutant phenotypes were genetically linked in five of eight mutants, and the DNA flanking the insertions was characterized. For the strains with altered growth at 37 degrees C and altered melanin production, mutations were in previously uncharacterized genes, while the two NO-sensitive strains bore insertions in the flavohemoglobin gene FHB1, whose product counters NO stress. Because of the frequent instability of nourseothricin resistance associated with biolistic transformation, Agrobacterium-mediated transformation was tested. This transkingdom DNA delivery approach produced 100% stable nourseothricin-resistant transformants, and three melanin-defective strains were identified from 576 transformants, of which 2 were linked to NAT in segregation analysis. One of these mutants contained a T-DNA insertion in the promoter of the LAC1 (laccase) gene, which encodes a key enzyme required for melanin production, while the second contained an insertion in the promoter of the CLC1 gene, encoding a voltage-gated chloride channel. Clc1 and its homologs are required for ion homeostasis, and in their absence Cu+ transport into the secretory pathway is compromised, depriving laccase and other Cu(+)-dependent proteins of their essential cofactor. The NAT resistance cassette was optimized for cryptococcal codon usage and GC content and was then used to disrupt a mitogen-activated protein kinase gene, a predicted gene, and two putative chloride channel genes to analyze their contributions to fungal physiology. Our findings demonstrate that both insertional mutagenesis methods can be applied to gene identification, but Agrobacterium-mediated transformation is more efficient and generates exclusively stable insertion mutations.     

Genetic analysis in Salmonella typhimurium with a small collection of randomly spaced insertions of transposon Tn10 delta 16 delta 17

We report the isolation of a group of 279 Salmonella typhimurium strains carrying randomly spaced insertions of the minitransposon Tn10 delta 16 delta 17 and describe the use of these strains to facilitate genetic analysis. The insertions were isolated initially in individual recombinant lambda clones from a genomic library. Individual insertions were then moved into the S. typhimurium chromosome, where the distribution of insertion sites relative to standard genetic markers was analyzed in a series of transductional crosses. Since a different, randomly chosen clone was used to generate each insertion, the distribution of insertion positions should have been as random as the cloning events leading to the formation of the library. In agreement with this expectation, most S. typhimurium markers tested were cotransducible with one or more of these Tn10 delta 16 delta 17 insertions. We expect that most new mutations will be quickly classified and mapped by determination of the pattern of cotransduction with this set of insertions. This use is illustrated by the analysis of a group of lac operon fusions regulated by anaerobiosis. We also describe several other applications that should make this collection a useful new tool in S. typhimurium genetics.     

Use of Pulsed Field Gel Electrophoresis and Transposon Mutagenesis to Estimate the Minimal Number of Genes Required for Motility in Caulobacter Crescentus

To facilitate the mapping of transposon insertion mutations in Caulobacter crescentus, we have used pulsed field gel electrophoresis to construct a detailed physical and genetic map of the C. crescentus genome. Restriction fragments were generated by DraI, AseI, or SpeI which cleave the C. crescentus 40, 13, and 26 times, respectively, and Tn5 insertions were used to align the restriction fragments generated by each of the enzymes. The utility of the resulting map was demonstrated by determining the chromosomal locations of a collection of flagellar mutations. As a result of this study, we were able to identify ten new flagellar genes at various locations on the chromosome. Thus, at least 48 genes are required for the assembly of a functional flagellum in C. crescentus.     

The Drosophila gene disruption project: progress using transposons with distinctive site specificities

The Drosophila Gene Disruption Project (GDP) has created a public collection of mutant strains containing single transposon insertions associated with different genes. These strains often disrupt gene function directly, allow production of new alleles, and have many other applications for analyzing gene function. Here we describe the addition of ～7600 new strains, which were selected from >140,000 additional P or piggyBac element integrations and 12,500 newly generated insertions of the Minos transposon. These additions nearly double the size of the collection and increase the number of tagged genes to at least 9440, approximately two-thirds of all annotated protein-coding genes. We also compare the site specificity of the three major transposons used in the project. All three elements insert only rarely within many Polycomb-regulated regions, a property that may contribute to the origin of "transposon-free regions" (TFRs) in metazoan genomes. Within other genomic regions, Minos transposes essentially at random, whereas P or piggyBac elements display distinctive hotspots and coldspots. P elements, as previously shown, have a strong preference for promoters. In contrast, piggyBac site selectivity suggests that it has evolved to reduce deleterious and increase adaptive changes in host gene expression. The propensity of Minos to integrate broadly makes possible a hybrid finishing strategy for the project that will bring >95% of Drosophila genes under experimental control within their native genomic contexts.     

Insertion and excision of Caenorhabditis elegans transposable element Tc1.

The transposable element Tc1 is responsible for most spontaneous mutations that occur in Caenorhabditis elegans variety Bergerac. We investigated the genetic and molecular properties of Tc1 transposition and excision. We show that Tc1 insertion into the unc-54 myosin heavy-chain gene was strongly site specific. The DNA sequences of independent Tc1 insertion sites were similar to each other, and we present a consensus sequence for Tc1 insertion that describes these similarities. We show that Tc1 excision was usually imprecise. Tc1 excision was imprecise in both germ line and somatic cells. Imprecise excision generated novel unc-54 alleles that had amino acid substitutions, amino acid insertions, and, in certain cases, probably altered mRNA splicing. The DNA sequences remaining after Tc1 somatic excision were the same as those remaining after germ line excision, but the frequency of somatic excision was at least 1,000-fold higher than that of germ line excision. The genetic properties of Tc1 excision, combined with the DNA sequences of the resulting unc-54 alleles, demonstrated that excision was dependent on Tc1 transposition functions in both germ line and somatic cells. Somatic excision was not regulated in the same strain-specific manner as germ-line excision was. In a genetic background where Tc1 transposition and excision in the germ line was not detectable, Tc1 excision in the soma still occurred at high frequency.     

A Medicago truncatula Tobacco Retrotransposon Insertion Mutant Collection with Defects in Nodule Development and Symbiotic Nitrogen Fixation

A Tnt1-insertion mutant population of Medicago truncatula ecotype R108 was screened for defects in nodulation and symbiotic nitrogen fixation. Primary screening of 9,300 mutant lines yielded 317 lines with putative defects in nodule development and/or nitrogen fixation. Of these, 230 lines were rescreened, and 156 lines were confirmed with defective symbiotic nitrogen fixation. Mutants were sorted into six distinct phenotypic categories: 72 nonnodulating mutants (Nod-), 51 mutants with totally ineffective nodules (Nod+ Fix-), 17 mutants with partially ineffective nodules (Nod+ Fix+/-), 27 mutants defective in nodule emergence, elongation, and nitrogen fixation (Nod+/- Fix-), one mutant with delayed and reduced nodulation but effective in nitrogen fixation (dNod+/- Fix+), and 11 supernodulating mutants (Nod++Fix+/-). A total of 2,801 flanking sequence tags were generated from the 156 symbiotic mutant lines. Analysis of flanking sequence tags revealed 14 insertion alleles of the following known symbiotic genes: NODULE INCEPTION (NIN), DOESN'T MAKE INFECTIONS3 (DMI3/CCaMK), ERF REQUIRED FOR NODULATION, and SUPERNUMERARY NODULES (SUNN). In parallel, a polymerase chain reaction-based strategy was used to identify Tnt1 insertions in known symbiotic genes, which revealed 25 additional insertion alleles in the following genes: DMI1, DMI2, DMI3, NIN, NODULATION SIGNALING PATHWAY1 (NSP1), NSP2, SUNN, and SICKLE. Thirty-nine Nod- lines were also screened for arbuscular mycorrhizal symbiosis phenotypes, and 30 mutants exhibited defects in arbuscular mycorrhizal symbiosis. Morphological and developmental features of several new symbiotic mutants are reported. The collection of mutants described here is a source of novel alleles of known symbiotic genes and a resource for cloning novel symbiotic genes via Tnt1 tagging.     

Tools for Gene-Regulatory Analyses in the Marine Annelid Platynereis dumerilii

The advent of high-throughput sequencing technology facilitates the exploration of a variety of reference species outside the few established molecular genetic model systems. Bioinformatic and gene expression analyses provide new ways for comparative analyses between species, for instance, in the field of evolution and development. Despite these advances, a critical bottleneck for the exploration of new model species remains the establishment of functional tools, such as the ability to experimentally express genes in specific cells of an organism. We recently established a first transgenic strain of the annelid Platynereis, using a Tc1/mariner-type Mos1 transposon vector. Here, we compare Mos1 with Tol2, a member of the hAT family of transposons. In Platynereis, Tol2-based constructs showed a higher frequency of nuclear genome insertion and sustained gene expression in the G0 generation. However, in contrast to Mos1-mediated transgenes, Tol2-mediated insertions failed to retain fluorescence in the G1 generation, suggesting a germ line-based silencing mechanism. Furthermore, we present three novel expression constructs that were generated by a simple fusion-PCR approach and allow either ubiquitous or cell-specific expression of a reporter gene. Our study indicates the versatility of Tol2 for transient transgenesis, and provides a template for transgenesis work in other emerging reference species.