Mesoporous MoS2 as a Transition Metal Dichalcogenide Exhibiting Pseudocapacitive Li and Na‐Ion Charge Storage

The ion insertion properties of MoS₂ continue to be of widespread interest for energy storage. While much of the current work on MoS₂ has been focused on the high capacity four‐electron reduction reaction, this process is prone to poor reversibility. Traditional ion intercalation reactions are highlighted and it is demonstrated that ordered mesoporous thin films of MoS₂ can be utilized as a pseudocapacitive energy storage material with a specific capacity of 173 mAh g^?1 for Li‐ions and 118 mAh g^?1 for Na‐ions at 1 mV s^?1. Utilizing synchrotron grazing incidence X‐ray diffraction techniques, fast electrochemical kinetics are correlated with the ordered porous structure and with an iso‐oriented crystal structure. When Li‐ions are utilized, the material can be charged and discharged in 20 seconds while still achieving a specific capacity of 140 mAh g^?1. Moreover, the nanoscale architecture of mesoporous MoS₂ retains this level of lithium capacity for 10 000 cycles. A detailed electrochemical kinetic analysis indicates that energy storage for both ions in MoS₂ is due to a pseudocapacitive mechanism.     

Black Phosphorus Quantum Dot/Ti3C2 MXene Nanosheet Composites for Efficient Electrochemical Lithium/Sodium‐Ion Storage

The exploration of new and efficient energy storage mechanisms through nanostructured electrode design is crucial for the development of high‐performance rechargeable batteries. Herein, black phosphorus quantum dots (BPQDs) and Ti₃C₂ nanosheets (TNSs) are employed as battery and pseudocapacitive components, respectively, to construct BPQD/TNS composite anodes with a novel battery‐capacitive dual‐model energy storage (DMES) mechanism for lithium‐ion and sodium‐ion batteries. Specifically, as a battery‐type component, BPQDs anchored on the TNSs are endowed with improved conductivity and relieved stress upon cycling, enabling a high‐capacity and stable energy storage. Meanwhile, the pseudocapacitive TNS component with further atomic charge polarization induced by P? O? Ti interfacial bonds between the two components allows enhanced charge adsorption and efficient interfacial electron transfer, contributing a higher pseudocapacitive value and fast energy storage. The DMES mechanism is evidenced by substantial characterizations of X‐ray photoelectron spectroscopy and X‐ray absorption fine structure spectroscopy, density functional theory calculations, and kinetics analyses. Consequently, the composite electrode exhibits superior battery performance, especially for lithium storage, such as high capacity (910 mAh g^?1 at 100 mA g^?1), long cycling stability (2400 cycles with a capacity retention over 100%), and high rate capability, representing the best comprehensive battery performance in BP‐based anodes to date.     

Ordered Network of Interconnected SnO2 Nanoparticles for Excellent Lithium‐Ion Storage

An ordered network of interconnected tin oxide (SnO₂) nanoparticles with a unique 3D architecture and an excellent lithium‐ion (Li‐ion) storage performance is derived for the first time through hydrolysis and thermal self‐assembly of the solid alkoxide precursor. Mesoporous anodes composed of these ≈9 nm‐sized SnO₂ particles exhibit substantially higher specific capacities, rate performance, coulombic efficiency, and cycling stabilities compared with disordered nanoparticles and commercial SnO₂. A discharge capacity of 778 mAh g^–1, which is very close to the theoretical limit of 781 mAh g^–1, is achieved at a current density of 0.1 C. Even at high rates of 2 C (1.5 A g^–1) and 6 C (4.7 A g^–1), these ordered SnO₂ nanoparticles retain stable specific capacities of 430 and 300 mAh g^–1, respectively, after 100 cycles. Interconnection between individual nanoparticles and structural integrity of the SnO₂ electrodes are preserved through numerous charge–discharge process cycles. The significantly better electrochemical performance of ordered SnO₂ nanoparticles with a tap density of 1.60 g cm^–3 is attributed to the superior electrode/electrolyte contact, Li‐ion diffusion, absence of particle agglomeration, and improved strain relaxation (due to tiny space available for the local expansion). This comprehensive study demonstrates the necessity of mesoporosity and interconnection between individual nanoparticles for improving the Li‐ion storage electrochemical performance of SnO₂ anodes.     

Interfacial Incompatibility and Internal Stresses in All‐Solid‐State Lithium Ion Batteries

Rechargeable Li‐ion batteries (LIBs) are electrochemical storage device widely applied in electric vehicles, mobile electronic devices, etc. However, traditional LIBs containing liquid electrolytes suffer from flammability, poor electrochemical stability, and limited operational temperature range. Replacement of the liquid electrolytes with inorganic solid‐state electrolytes (SSEs) would solve this problem. However, several critical issues, such as poor interfacial compatibility, low ionic conductivity at ambient temperatures, etc., need to be surmounted before the commercialization of all‐solid‐state Li‐ion batteries (ASSLIBs). In this review, a brief historical context for the inorganic SSEs is described first. Then, two critical issues in the ASSLIBs are highlighted: interfacial incompatibility of the electrodes and SSEs and internal stresses. For the interfacial incompatibility, the discussion is focused on the dynamic characterization of the electrode/SSE interfaces, the origin and evolution of the interfacial resistance, and interface engineering to minimize the interfacial resistance. The internal stresses in the ASSLIBs are another major concern because rigid contacts are introduced. Stress generation, stress evolution during battery cycling, stress measurement/simulation, and ways to alleviate the stresses are outlined in detail. Finally, current challenges and perspectives for future development of the inorganic SSEs and ASSLIBs are outlined.     

Vertically Aligned MoS2 Nanosheets Patterned on Electrochemically Exfoliated Graphene for High‐Performance Lithium and Sodium Storage

Molybdenum disulfide (MoS₂) has been recognized as a promising anode material for high‐energy Li‐ion (LIBs) and Na‐ion batteries (SIBs) due to its apparently high capacity and intriguing 2D‐layered structure. The low conductivity, unsatisfied mechanical stability, and limited active material utilization are three key challenges associated with MoS₂ electrodes especially at high current rates and mass active material loading. Here, vertical MoS₂ nanosheets are controllably patterned onto electrochemically exfoliated graphene (EG). Within the achieved hierarchical architecture, the intimate contact between EG and MoS₂ nanosheets, interconnected network, and effective exposure of active materials by vertical channels simultaneously overcomes the above three problems, enabling high mechanical integrity and fast charge transport kinetics. Serving as anode material for LIBs, EG‐MoS₂ with 95 wt% MoS₂ content delivered an ultrahigh‐specific capacity of 1250 mA h g^?1 after 150 stable cycles at 1 A g^?1, which is among the highest values in all reported MoS₂ electrodes, and excellent rate performance (970 mA h g^?1 at 5 A g^?1). Moreover, impressive cycling stability (509 mA h g^?1 at 1 A g^?1 after 250 cycles) and rate capability (423 mA h g^?1 at 2 A g^?1) were also achieved for SIBs. The area capacities reached 1.27 and 0.49 mA h cm^?2 at ≈1 mA cm^?2 for LIBs and SIBs, respectively. This work may inspire the development of new 2D hierarchical structures for high efficiency energy storage and conversion.     

Realizing Reversible Conversion‐Alloying of Sb(V) in Polyantimonic Acid for Fast and Durable Lithium‐ and Potassium‐Ion Storage

Finding suitable electrode materials for alkali‐metal‐ion storage is vital to the next‐generation energy‐storage technologies. Polyantimonic acid (PAA, H₂Sb₂O₆ · nH₂O), having pentavalent antimony species and an interconnected tunnel‐like pyrochlore crystal framework, is a promising high‐capacity energy‐storage material. Fabricating electrochemically reversible PAA electrode materials for alkali‐metal‐ion storage is a challenge and has never been reported due to the extremely poor intrinsic electronic conductivity of PAA associated with the highest oxidation state Sb(V). Combining nanostructure engineering with a conductive‐network construction strategy, here is reported a facile one‐pot synthesis protocol for crafting uniform internal‐void‐containing PAA nano‐octahedra in a composite with nitrogen‐doped reduced graphene oxide nanosheets (PAA?N‐RGO), and for the first time, realizing the reversible storage of both Li⁺ and K⁺ ions in PAA?N‐RGO. Such an architecture, as validated by theoretical calculations and ex/in situ experiments, not only fully takes advantage of the large‐sized tunnel transport pathways (0.37 nm²) of PAA for fast solid‐phase ionic diffusion but also leads to exponentially increased electrical conductivity (3.3 S cm^?1 in PAA?N‐RGO vs 4.8 × 10^?10 S cm^?1 in bare‐PAA) and yields an inside‐out buffer function for accommodating volume expansion. Compared to electrochemically irreversible bare‐PAA, PAA?N‐RGO manifests reversible conversion‐alloying of Sb(V) toward fast and durable Li⁺‐ and K⁺‐ion storage.     

High‐Voltage Oxygen‐Redox‐Based Cathode for Rechargeable Sodium‐Ion Batteries

Recently, anionic‐redox‐based materials have shown promising electrochemical performance as cathode materials for sodium‐ion batteries. However, one of the limiting factors in the development of oxygen‐redox‐based electrodes is their low operating voltage. In this study, the operating voltage of oxygen‐redox‐based electrodes is raised by incorporating nickel into P2‐type Na_2/3[Zn_0.3Mn_0.7]O₂ in such a way that the zinc is partially substituted by nickel. As designed, the resulting P2‐type Na_2/3[(Ni_0.5Zn_0.5)_0.3Mn_0.7]O₂ electrode exhibits an average operating voltage of 3.5 V and retains 95% of its initial capacity after 200 cycles in the voltage range of 2.3–4.6 V at 0.1C (26 mA g^?1). Operando X‐ray diffraction analysis reveals the reversible phase transition: P2 to OP4 phase on charge and recovery to the P2 phase on discharge. Moreover, ex situ X‐ray absorption near edge structure and X‐ray photoelectron spectroscopy studies reveal that the capacity is generated by the combination of Ni²⁺/Ni⁴⁺ and O^2?/O^1? redox pairs, which is supported by first‐principles calculations. It is thought that this kind of high voltage redox species combined with oxygen redox could be an interesting approach to further increase energy density of cathode materials for not only sodium‐based rechargeable batteries, but other alkali‐ion battery systems.     

Fast Sodium Storage in TiO2@CNT@C Nanorods for High‐Performance Na‐Ion Capacitors

Na‐ion capacitors have attracted extensive interest due to the combination of the merits of high energy density of batteries and high power density as well as long cycle life of capacitors. Here, a novel Na‐ion capacitor, utilizing TiO₂@CNT@C nanorods as an intercalation‐type anode and biomass‐derived carbon with high surface area as an ion adsorption cathode in an organic electrolyte, is reported. The advanced architecture of TiO₂@CNT@C nanorods, prepared by electrospinning method, demonstrates excellent cyclic stability and outstanding rate capability in half cells. The contribution of extrinsic pseudocapacitance affects the rate capability to a large extent, which is identified by kinetics analysis. A key finding is that ion/electron transfer dynamics of TiO₂@CNT@C could be effectively enhanced due to the addition of multiwalled carbon nanotubes. Also, the biomass‐derived carbon with high surface area displays high specific capacity and excellent rate capability. Owing to the merits of structures and excellent performances of both anode and cathode materials, the assembled Na‐ion capacitors provide an exceptionally high energy density (81.2 W h kg^?1) and high power density (12 400 W kg^?1) within 1.0–4.0 V. Meanwhile, the Na‐ion capacitors achieve 85.3% capacity retention after 5000 cycles tested at 1 A g^?1.     

Defect‐Rich Soft Carbon Porous Nanosheets for Fast and High‐Capacity Sodium‐Ion Storage

Soft carbon has attracted tremendous attention as an anode in rocking‐chair batteries owing to its exceptional properties including low‐cost, tunable interlayer distance, and favorable electronic conductivity. However, it fails to exhibit decent performance for sodium‐ion storage owing to difficulties in the formation of sodium intercalation compounds. Here, microporous soft carbon nanosheets are developed via a microwave induced exfoliation strategy from a conventional soft carbon compound obtained by pyrolysis of 3,4,9,10‐perylene tetracarboxylic dianhydride. The micropores and defects at the edges synergistically leads to enhanced kinetics and extra sodium‐ion storage sites, which contribute to the capacity increase from 134 to 232 mAh g^?1 and a superior rate capability of 103 mAh g^?1 at 1000 mA g^?1 for sodium‐ion storage. In addition, the capacitance‐dominated sodium‐ion storage mechanism is identified through the kinetics analysis. The in situ X‐ray diffraction analyses are used to reveal that sodium ions intercalate into graphitic layers for the first time. Furthermore, the as‐prepared nanosheets can also function as an outstanding anode for potassium‐ion storage (reversible capacity of 291 mAh g^?1) and dual‐ion full cell (cell‐level capacity of 61 mAh g^?1 and average working voltage of 4.2 V). These properties represent the potential of soft carbon for achieving high‐energy, high‐rate, and low‐cost energy storage systems.     

Confined Fe2VO4⊂Nitrogen‐Doped Carbon Nanowires with Internal Void Space for High‐Rate and Ultrastable Potassium‐Ion Storage

Developing low‐cost, high‐capacity, high‐rate, and robust earth‐abundant electrode materials for energy storage is critical for the practical and scalable application of advanced battery technologies. Herein, the first example of synthesizing 1D peapod‐like bimetallic Fe₂VO₄ nanorods confined in N‐doped carbon porous nanowires with internal void space (Fe₂VO₄?NC nanopeapods) as a high‐capacity and stable anode material for potassium‐ion batteries (KIBs) is reported. The peapod‐like Fe₂VO₄?NC nanopeapod heterostructures with interior void space and external carbon shell efficiently prevent the aggregation of the active materials, facilitate fast transportation of electrons and ions, and accommodate volume variation during the cycling process, which substantially boosts the rate and cycling performance of Fe₂VO₄. The Fe₂VO₄?NC electrode exhibits high reversible specific depotassiation capacity of 380 mAh g^?1 at 100 mA g^?1 after 60 cycles and remarkable rate capability as well as long cycling stability with a high capacity of 196 mAh g^?1 at 4 A g^?1 after 2300 cycles. The first‐principles calculations reveal that Fe₂VO₄?NC nanopeapods have high ionic/electronic conductivity characteristics and low diffusion barriers for K⁺‐intercalation. This study opens up new way for investigating high‐capacity metal oxide as high‐rate and robust electrode materials for KIBs.     

Textile‐Based Electrochemical Energy Storage Devices

In the past few years, insensitive attentions have been drawn to wearable and flexible energy storage devices/systems along with the emergence of wearable electronics. Much progress has been achieved in developing flexible electrochemical energy storage devices with high end‐use performance. However, challenges still remain in well balancing the electrochemical properties, mechanical properties, and the processing technologies. In this review, a specific perspective on the development of textile‐based electrochemical energy storage devices (TEESDs), in which textile components and technologies are utilized to enhance the energy storage ability and mechanical properties of wearable electronic devices, is provided. The discussion focuses on the material preparation and characteristics, electrode and device fabrication strategies, electrochemical performance and metrics, wearable compatibility, and fabrication scalability of TEESDs including textile‐based supercapacitors and lithium‐ion batteries.     

MoS2‐Based All‐Purpose Fibrous Electrode and Self‐Powering Energy Fiber for Efficient Energy Harvesting and Storage

Here an all‐purpose fibrous electrode based on MoS₂ is demonstrated, which can be employed for versatile energy harvesting and storage applications. In this coaxial electrode, ultrathin MoS₂ nanofilms are grown on TiO₂ nanoparticles coated carbon fiber. The high electrochemical activity of MoS₂ and good conductivity of carbon fiber synergistically lead to the remarkable performances of this novel composite electrode in fibrous dye‐sensitized solar cells (showing a record‐breaking conversion efficiency of 9.5%) and high‐capacity fibrous supercapacitors. Furthermore, a self‐powering energy fiber is fabricated by combining a fibrous dye‐sensitized solar cell and a fibrous supercapacitor into a single device, showing very fast charging capability (charging in 7 s under AM1.5G solar illumination) and an overall photochemical‐electricity energy conversion efficiency as high as 1.8%. In addition, this wire‐shaped electrode can also be used for fibrous Li‐ion batteries and electrocatalytic hydrogen evolution reactions. These applications indicate that the MoS₂‐based all‐purpose fibrous electrode has great potential for the construction of high‐performance flexible and wearable energy devices.     

Defect Engineering of Oxygen‐Deficient Manganese Oxide to Achieve High‐Performing Aqueous Zinc Ion Battery

A major limitation of MnO₂ in aqueous Zn/MnO₂ ion battery applications is the poor utilization of its electrochemical active surface area. Herein, it is shown that by generating oxygen vacancies (V_O) in the MnO₂ lattice, Gibbs free energy of Zn²⁺ adsorption in the vicinity of V_O can be reduced to thermoneutral value (≈0.05 eV). This suggests that Zn²⁺ adsorption/desorption process on oxygen‐deficient MnO₂ is more reversible as compared to pristine MnO₂. In addition, because of the fact that fewer electrons are needed for Zn? O bonding in oxygen‐deficient MnO₂, more valence electrons can be contributed into the delocalized electron cloud of the material, which aids in enhancing the attainable capacity. As a result, the stable Zn/oxygen‐deficient MnO₂ battery is able to deliver one of the highest capacities of 345 mAh g^?1 reported for a birnessite MnO₂ system. This excellent electrochemical performance suggests that generating oxygen vacancies in MnO₂ may aid in the future development of advanced cathodes for aqueous Zn ion batteries.     

Sodium‐Ion Batteries Paving the Way for Grid Energy Storage

The recent proliferation of renewable energy generation offers mankind hope, with regard to combatting global climate change. However, reaping the full benefits of these renewable energy sources requires the ability to store and distribute any renewable energy generated in a cost‐effective, safe, and sustainable manner. As such, sodium‐ion batteries (NIBs) have been touted as an attractive storage technology due to their elemental abundance, promising electrochemical performance and environmentally benign nature. Moreover, new developments in sodium battery materials have enabled the adoption of high‐voltage and high‐capacity cathodes free of rare earth elements such as Li, Co, Ni, offering pathways for low‐cost NIBs that match their lithium counterparts in energy density while serving the needs for large‐scale grid energy storage. In this essay, a range of battery chemistries are discussed alongside their respective battery properties while keeping metrics for grid storage in mind. Matters regarding materials and full cell cost, supply chain and environmental sustainability are discussed, with emphasis on the need to eliminate several elements (Li, Ni, Co) from NIBs. Future directions for research are also discussed, along with potential strategies to overcome obstacles in battery safety and sustainable recyclability.     

High‐Energy Aqueous Lithium Batteries

Owing to the high voltage of lithium‐ion batteries (LIBs), the dominating electrolyte is non‐aqueous. The idea of an aqueous rechargeable lithium battery (ARLB) dates back to 1994, but it had attracted little attention due to the narrow stable potential window of aqueous electrolytes, which results in low energy density. However, aqueous electrolytes were employed during the 2000s for the fundamental studies of electrode materials in the absence of side reactions such as the decomposition of organic species. The high solubility of lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) in water has introduced new opportunities for high‐voltage ARLBs. Nonetheless, these ideas are somehow overshadowed by the common perception about the essential limitation of the aqueous electrolyte. The electrochemical behaviour of conventional electrode materials can be substantially tuned in the water‐in‐salt electrolytes. The latest idea of utilising a graphite anode in the aqueous water‐in‐salt electrolytes has paved the way towards not only 4‐V ARLB but also a new generation of Li?S batteries with a higher operating voltage and energy efficiency. Furthermore, aqueous electrolytes can provide a cathodically stable environment for Li?O₂ batteries. The present paper aims to highlight these emerging opportunities possibly leading to a new generation of LIBs, which can be substantially cheaper and safer.     

Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have dominated the portable electronics industry and solid‐state electrochemical research and development for the past two decades. In light of possible concerns over the cost and future availability of lithium, sodium‐ion batteries (SIBs) and other new technologies have emerged as candidates for large‐scale stationary energy storage. Research in these technologies has increased dramatically with a focus on the development of new materials for both the positive and negative electrodes that can enhance the cycling stability, rate capability, and energy density. Two‐dimensional (2D) materials are showing promise for many energy‐related applications and particularly for energy storage, because of the efficient ion transport between the layers and the large surface areas available for improved ion adsorption and faster surface redox reactions. Recent research highlights on the use of 2D materials in these future ‘beyond‐lithium‐ion’ battery systems are reviewed, and strategies to address challenges are discussed as well as their prospects.