Proton Ion Exchange Reaction in Li3IrO4: A Way to New H3+xIrO4 Phases Electrochemically Active in Both Aqueous and Nonaqueous Electrolytes

Progress over the past decade in Li‐insertion compounds has led to a new class of Li‐rich layered oxide electrodes cumulating both cationic and anionic redox processes. Pertaining to this new class of materials are the Li/Na iridate phases, which present a rich crystal chemistry. This work reports on a new protonic iridate phase H_3+xIrO₄ having a layered structure obtained by room temperature acid‐leaching of Li₃IrO₄. This new phase shows reversible charge storage properties of 1.5 e^? per Ir atom with high rate capabilities in both nonaqueous (vs Li⁺/Li) and aqueous (vs capacitive carbon) media. It is demonstrated that Li‐insertion in carbonate LiPF₆‐based electrolyte occurs through a classical reduction process (Ir⁵⁺ ? Ir³⁺), which is accompanied by a well‐defined structural transition. In concentrated H₂SO₄ electrolyte, this work provides evidence that the overall capacity of 1.7 H⁺ per Ir results from two additive redox processes with the low potential one showing ohmic limitations. Altogether, the room temperature protonation approach, which can be generalized to various Li‐rich phases containing either 3d, 4d or 5d metals, offers great opportunities for the judicious design of attractive electrode materials.     

Synthesis and Electrochemical Activity of Some Na(Li)‐Rich Ruthenium Oxides with the Feasibility to Stabilize Ru6+

The capacity of Li‐ion cathode materials has recently been greatly improved by the feasibility to trigger both cationic and anionic redox reactions within the same material. This concept has rapidly been implemented to Na‐ion batteries to boost their energy density. The electrochemical properties of Na₃RuO₄ with Li₃RuO₄ are reported and compared herein. Strikingly, it is found that 3 Na can be extracted from Na₃RuO₄ with the charge compensation mechanism enlisting first the oxidation of Ru⁵⁺ to Ru⁶⁺, leading to Na₂RuO₄, and then the oxidation of oxygen during the rest of the charge. This drastically contrasts with the behavior of the Li counterpart since Ru never reaches that high oxidation state during lithium removal. By comparing the phase diagrams of A_xRuO₄ (A being Li, Na, or K) together with density functional theory calculations, this finding is rationalized and it is demonstrated that this difference is mainly rooted in the size of the alkali cation. The bigger the alkali, the lower the coordination of Ru will be, stabilized by the same higher oxidation states. This work highlights the difference between Li and Na materials toward anionic redox and suggests the unusual coexistence of Ru⁶⁺ and (O₂)^n?, hence setting new challenges to theoreticians and opening opportunities for materials design.     

Insights into the Enhanced Cycle and Rate Performances of the F‐Substituted P2‐Type Oxide Cathodes for Sodium‐Ion Batteries

A series of F‐substituted Na_2/3Ni_1/3Mn_2/3O_2?xF_x (x = 0, 0.03, 0.05, 0.07) cathode materials have been synthesized and characterized by solid‐state ¹⁹F and ²³Na NMR, X‐ray photoelectron spectroscopy, and neutron diffraction. The underlying charge compensation mechanism is systematically unraveled by X‐ray absorption spectroscopy and electron energy loss spectroscopy (EELS) techniques, revealing partial reduction from Mn⁴⁺ to Mn³⁺ upon F‐substitution. It is revealed that not only Ni but also Mn participates in the redox reaction process, which is confirmed for the first time by EELS techniques, contributing to an increase in discharge specific capacity. The detailed structural transformations are also revealed by operando X‐ray diffraction experiments during the intercalation and deintercalation process of Na⁺, demonstrating that the biphasic reaction is obviously suppressed in the low voltage region via F‐substitution. Hence, the optimized sample with 0.05 mol f.u.^?1 fluorine substitution delivers an ultrahigh specific capacity of 61 mAh g^?1 at 10 C after 2000 cycles at 30 °C, an extraordinary cycling stability with a capacity retention of 75.6% after 2000 cycles at 10 C and 55 °C, an outstanding full battery performance with 89.5% capacity retention after 300 cycles at 1 C. This research provides a crucial understanding of the influence of F‐substitution on the crystal structure of the P2‐type materials and opens a new avenue for sodium‐ion batteries.     

Fe‐Based Tunnel‐Type Na0.61[Mn0.27Fe0.34Ti0.39]O2 Designed by a New Strategy as a Cathode Material for Sodium‐Ion Batteries

Sodium‐ion batteries are promising for grid‐scale storage applications due to the natural abundance and low cost of sodium. However, few electrodes that can meet the requirements for practical applications are available today due to the limited routes to exploring new materials. Here, a new strategy is proposed through partially/fully substituting the redox couple of existing negative electrodes in their reduced forms to design the corresponding new positive electrode materials. The power of this strategy is demonstrated through the successful design of new tunnel‐type positive electrode materials of Na_0.61[Mn_0.61‐xFe_xTi_0.39]O₂, composed of non‐toxic and abundant elements: Na, Mn, Fe, Ti. In particular, the designed air‐stable Na_0.61[Mn_0.27Fe_0.34Ti_0.39]O₂ shows a usable capacity of ≈90 mAh g^?1, registering the highest value among the tunnel‐type oxides, and a high storage voltage of 3.56 V, corresponding to the Fe³⁺/Fe⁴⁺ redox couple realized for the first time in non‐layered oxides, which was confirmed by X‐ray absorption spectroscopy and Mössbauer spectroscopy. This new strategy would open an exciting route to explore electrode materials for rechargeable batteries.     

High‐Voltage Oxygen‐Redox‐Based Cathode for Rechargeable Sodium‐Ion Batteries

Recently, anionic‐redox‐based materials have shown promising electrochemical performance as cathode materials for sodium‐ion batteries. However, one of the limiting factors in the development of oxygen‐redox‐based electrodes is their low operating voltage. In this study, the operating voltage of oxygen‐redox‐based electrodes is raised by incorporating nickel into P2‐type Na_2/3[Zn_0.3Mn_0.7]O₂ in such a way that the zinc is partially substituted by nickel. As designed, the resulting P2‐type Na_2/3[(Ni_0.5Zn_0.5)_0.3Mn_0.7]O₂ electrode exhibits an average operating voltage of 3.5 V and retains 95% of its initial capacity after 200 cycles in the voltage range of 2.3–4.6 V at 0.1C (26 mA g^?1). Operando X‐ray diffraction analysis reveals the reversible phase transition: P2 to OP4 phase on charge and recovery to the P2 phase on discharge. Moreover, ex situ X‐ray absorption near edge structure and X‐ray photoelectron spectroscopy studies reveal that the capacity is generated by the combination of Ni²⁺/Ni⁴⁺ and O^2?/O^1? redox pairs, which is supported by first‐principles calculations. It is thought that this kind of high voltage redox species combined with oxygen redox could be an interesting approach to further increase energy density of cathode materials for not only sodium‐based rechargeable batteries, but other alkali‐ion battery systems.     

Anionic Redox Activity Regulated by Transition Metal in Lithium‐Rich Layered Oxides

The anionic redox activity in lithium‐rich layered oxides has the potential to boost the energy density of lithium‐ion batteries. Although it is widely accepted that the anionic redox activity stems from the orphaned oxygen energy level, its regulation and structural stabilization, which are essential for practical employment, remain still elusive, requiring an improved fundamental understanding. Herein, the oxygen redox activity for a wide range of 3d transition‐metal‐based Li₂TMO₃ compounds is investigated and the intrinsic competition between the cationic and anionic redox reaction is unveiled. It is demonstrated that the energy level of the orphaned oxygen state (and, correspondingly, the activity) is delicately governed by the type and number of neighboring transition metals owing to the π‐type interactions between Li? O? Li and M t_2g states. Based on these findings, a simple model that can be used to estimate the anionic redox activity of various lithium‐rich layered oxides is proposed. The model explains the recently reported significantly different oxygen redox voltages or inactivity in lithium‐rich materials despite the commonly observed Li? O? Li states with presumably unhybridized character. The discovery of hidden factors that rule the anionic redox in lithium‐rich cathode materials will aid in enabling controlled cumulative cationic and anionic redox reactions.     

Stress Distortion Restraint to Boost the Sodium Ion Storage Performance of a Novel Binary Hexacyanoferrate

Mn‐based hexacyanoferrate Na_xMnFe(CN)₆ (NMHFC) has been attracting more attention as a promising cathode material for sodium ion storage owing to its low cost, environmental friendliness, and its high voltage plateau of 3.6 V, which comes from the Mn²⁺/Mn³⁺ redox couple. In particular, the Na‐rich NMHFC (x > 1.40) with trigonal phase is considered an attractive candidate due to its large capacity of ≈130 mAh g^?1, delivering high energy density. Its unstable cycle life, however, is holding back its practical application due to the dissolution of Mn²⁺ and the trigonal‐cubic phase transition during the charge–discharge process. Here, a novel hexacyanoferrate (Na_1.60Mn_0.833Fe_0.167[Fe(CN)₆], NMFHFC‐1) with Na‐rich cubic structure and dual‐metal active redox couples is developed for the first time. Through multiple structural modulation, the stress distortion is minimized by restraining Mn²⁺ dissolution and the trigonal‐cubic phase transition, which are common issues in manganese‐based hexacyanoferrate. Moreover, NMFHFC‐1 simultaneously retains an abundance of Na ions in the framework. As a result, Na_1.60Mn_0.833Fe_0.167[Fe(CN)₆] electrode delivers high energy density (436 Wh kg^?1) and excellent cycle life (80.2% capacity retention over 300 cycles), paving the way for the development of novel commercial cathode materials for sodium ion storage.     

Suppression of Voltage Decay through Manganese Deactivation and Nickel Redox Buffering in High‐Energy Layered Lithium‐Rich Electrodes

Cobalt‐free layered lithium‐rich nickel manganese oxides, Li[Li_xNi_yMn_1?x?y]O₂ (LLNMO), are promising positive electrode materials for lithium rechargeable batteries because of their high energy density and low materials cost. However, substantial voltage decay is inevitable upon electrochemical cycling, which makes this class of materials less practical. It has been proposed that undesirable voltage decay is linked to irreversible structural rearrangement involving irreversible oxygen loss and cation migration. Herein, the authors demonstrate that the voltage decay of the electrode is correlated to Mn⁴⁺/Mn³⁺ redox activation and subsequent cation disordering, which can be remarkably suppressed via simple compositional tuning to induce the formation of Ni³⁺ in the pristine material. By implementing our new strategy, the Mn⁴⁺/Mn³⁺ reduction is subdued by an alternative redox reaction involving the use of pristine Ni³⁺ as a redox buffer, which has been designed to be widened from Ni³⁺/Ni⁴⁺ to Ni²⁺/Ni⁴⁺, without compensation for the capacity in principle. Negligible change in the voltage profile of modified LLNMO is observed upon extended cycling, and manganese migration into the lithium layer is significantly suppressed. Based on these findings, we propose a general strategy to suppress the voltage decay of Mn‐containing lithium‐rich oxides to achieve long‐lasting high energy density from this class of materials.     

Native Vacancy Enhanced Oxygen Redox Reversibility and Structural Robustness

Cathode materials with high energy density, long cycle life, and low cost are of top priority for energy storage systems. The Li‐rich transition metal (TM) oxides achieve high specific capacities by redox reactions of both the TM and oxygen ions. However, the poor reversible redox reaction of the anions results in severe fading of the cycling performance. Herein, the vacancy‐containing Na_4/7[Mn_6/7(?_Mn)_1/7]O₂ (?_Mn for vacancies in the Mn? O slab) is presented as a novel cathode material for Na‐ion batteries. The presence of native vacancies endows this material with attractive properties including high structural flexibility and stability upon Na‐ion extraction and insertion and high reversibility of oxygen redox reaction. Synchrotron X‐ray absorption near edge structure and X‐ray photoelectron spectroscopy studies demonstrate that the charge compensation is dominated by the oxygen redox reaction and Mn³⁺/Mn⁴⁺ redox reaction separately. In situ synchrotron X‐ray diffraction exhibits its zero‐strain feature during the cycling. Density functional theory calculations further deepen the understanding of the charge compensation by oxygen and manganese redox reactions and the immobility of the Mn ions in the material. These findings provide new ideas on searching for and designing materials with high capacity and high structural stability for novel energy storage systems.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.     

Realizing Three‐Electron Redox Reactions in NASICON‐Structured Na3MnTi(PO4)3 for Sodium‐Ion Batteries

Developing multielectron reaction electrode materials is essential for achieving high specific capacity and high energy density in secondary batteries; however, it remains a great challenge. Herein, Na₃MnTi(PO₄)₃/C hollow microspheres with an open and stable NASICON framework are synthesized by a spray‐drying‐assisted process. When applied as a cathode material for sodium‐ion batteries, the resultant Na₃MnTi(PO₄)₃/C microspheres demonstrate fully reversible three‐electron redox reactions, corresponding to the Ti^3+/4+ (≈2.1 V), Mn^2+/3+ (≈3.5 V), and Mn^3+/4+ (≈4.0 V vs Na⁺/Na) redox couples. In situ X‐ray diffraction results reveals that both solid‐solution and two‐phase electrochemical reactions are involved in the sodiation/desodiation processes. The high specific capacity (160 mAh g^?1 at 0.2 C), outstanding cyclability (≈92% capacity retention after 500 cycles at 2 C), and the facile synthesis make the Na₃MnTi(PO₄)₃/C a prospective cathode material for sodium‐ion batteries.     

Electrochemically Modifying the Electronic Structure of IrO2 Nanoparticles for Overall Electrochemical Water Splitting with Extensive Adaptability

Designing the electrocatalysts that are stable and active for extensively adaptable water splitting is highly desirable for developing hydrogen based energy. IrO₂ is a promising and widely used catalyst for the oxygen evolution reaction in commercial applications, but is rarely used for the hydrogen evolution reaction (HER), due to the high Gibbs free energy for hydrogen adsorption (ΔG_H*). Herein, an approach to modify the electronic structure of IrO₂ via cyclic voltammetry is proposed. In this process, Ir(+4) is partially reduced and trace Pt is simultaneously deposited on IrO₂, which greatly lowers the ΔG_H* and thus accelerates the reaction kinetics. The as‐prepared Pt–IrO₂/CC with low noble metal loading (36.6 µg cm^?2_(Ir+Pt)) exhibits excellent HER activity with overpotentials of 5, 22, and 26 mV at 10 mA cm^?2 in 0.5 m H₂SO₄, 1 m KOH, and 1 m phosphate buffer solution, respectively, making it possible to organize an all‐IrO₂ based water electrolyzer. The Pt–IrO₂/CC||IrO₂/CC couple exhibits a promising activity and stability in pH‐universal conditions as well as natural seawater for H₂ production. Density function theory calculations reveal that the optimized electronic structure of IrO₂ balances the ΔG_H*, resulting in a much enhanced HER performance.     

Na3V2(PO4)3 as the Sole Solid Energy Storage Material for Redox Flow Sodium‐Ion Battery

Redox flow batteries have considerable advantages of system scalability and operation flexibility over other battery technologies, which makes them promising for large‐scale energy storage application. However, they suffer from low energy density and consequently relatively high cost for a nominal energy output. Redox targeting–based flow batteries are employed by incorporating solid energy storage materials in the tank and present energy density far beyond the solubility limit of the electrolytes. The success of this concept relies on paring suitable redox mediators with solid materials for facilitated reaction kinetics and lean electrolyte composition. Here, a redox targeting‐based flow battery system using the NASICON‐type Na₃V₂(PO₄)₃ as a capacity booster for both the catholyte and anolyte is reported. With 10‐methylphenothiazine as the cathodic redox mediator and 9‐fluorenone as anodic redox mediator, an all‐organic single molecule redox targeting–based flow battery is developed. The anodic and cathodic capacity are 3 and 17 times higher than the solubility limit of respective electrolyte, with which a full cell can achieve an energy density up to 88 Wh L^?1. The reaction mechanism is scrutinized by operando and in‐situ X‐ray and UV–vis absorption spectroscopy. The reaction kinetics are analysed in terms of Butler–Volmer formalism.     

Improved Cycling Performance of Li‐Excess Cation‐Disordered Cathode Materials upon Fluorine Substitution

The recent discovery of Li‐excess cation‐disordered rock salt cathodes has greatly enlarged the design space of Li‐ion cathode materials. Evidence of facile lattice fluorine substitution for oxygen has further provided an important strategy to enhance the cycling performance of this class of materials. Here, a group of Mn³⁺–Nb⁵⁺‐based cation‐disordered oxyfluorides, Li_1.2Mn³⁺_0.6+0.5xNb⁵⁺_0.2?0.5xO_2?xF_x (x = 0, 0.05, 0.1, 0.15, 0.2) is investigated and it is found that fluorination improves capacity retention in a very significant way. Combining spectroscopic methods and ab initio calculations, it is demonstrated that the increased transition‐metal redox (Mn³⁺/Mn⁴⁺) capacity that can be accommodated upon fluorination reduces reliance on oxygen redox and leads to less oxygen loss, as evidenced by differential electrochemical mass spectroscopy measurements. Furthermore, it is found that fluorine substitution also decreases the Mn³⁺‐induced Jahn–Teller distortion, leading to an orbital rearrangement that further increases the contribution of Mn‐redox capacity to the overall capacity.     

Controlled Oxygen Redox for Excellent Power Capability in Layered Sodium‐Based Compounds

A high‐rate of oxygen redox assisted by cobalt in layered sodium‐based compounds is achieved. The rationally designed Na_0.6[Mg_0.2Mn_0.6Co_0.2]O₂ exhibits outstanding electrode performance, delivering a discharge capacity of 214 mAh g^?1 (26 mA g^?1) with capacity retention of 87% after 100 cycles. High rate performance is also achieved at 7C (1.82 A g^?1) with a capacity of 107 mAh g^?1. Surprisingly, the Na_0.6[Mg_0.2Mn_0.6Co_0.2]O₂ compound is able to deliver capacity for 1000 cycles at 5C (at 1.3 A g^?1), retaining 72% of its initial capacity of 108 mAh g^?1. X‐ray absorption spectroscopy analysis of the O K‐edge indicates the oxygen‐redox species (O^2?/1?) is active during cycling. First‐principles calculations show that the addition of Co reduces the bandgap energy from ≈2.65 to ≈0.61 eV and that overlapping of the Co 3d and O 2p orbitals facilitates facile electron transfer, enabling the long‐term reversibility of the oxygen redox, even at high rates. To the best of the authors' knowledge, this is the first report on high‐rate oxygen redox in sodium‐based cathode materials, and it is believed that the findings will open a new pathway for the use of oxygen‐redox‐based materials for sodium‐ion batteries.     

Na‐Ion Intercalation and Charge Storage Mechanism in 2D Vanadium Carbide

2D vanadium carbide MXene containing surface functional groups (denoted as V₂CT_x , where T_x are surface functional groups) is synthesized and studied as anode material for Na‐ion batteries. V₂CT_x anode exhibits reversible charge storage with good cycling stability and high rate capability through electrochemical test. The charge storage mechanism of V₂CT_x material during Na⁺ intercalation/deintercalation and the redox reaction of vanadium are studied using a combination of synchrotron based X‐ray diffraction, hard X‐ray absorption near edge spectroscopy (XANES), and soft X‐ray absorption spectroscopy (sXAS). Experimental evidence of a major contribution of redox reaction of vanadium to the charge storage and the reversible capacity of V₂CT_x during sodiation/desodiation process are provided through V K ‐edge XANES and V L _2,3‐edge sXAS results. A correlation between the CO₃^2? content and the Na⁺ intercalation/deintercalation states in the V₂CT_x electrode observed from C and O K ‐edge in sXAS results implies that some additional charge storage reactions may take place between the Na⁺‐intercalated V₂CT_x and the carbonate‐based nonaqueous electrolyte. The results of this study provide valuable information for the further studies on V₂CT_x as anode material for Na‐ion batteries and capacitors.     

Redox Targeting of Anatase TiO2 for Redox Flow Lithium‐Ion Batteries

Anatase TiO₂ is an extensively studied anode material for lithium‐ion batteries because of its superior capability of storing Li⁺ electrochemically. Here reversible lithium storage of TiO₂ is achieved chemically using redox targeting reactions. In the presence of a pair of redox mediators, bis(pentamethylcyclopentadienyl)cobalt (CoCp^* ₂) and cobaltocene (CoCp₂) in an electrolyte, TiO₂ and its lithiated form Li _x TiO₂ can be reduced and oxidized by CoCp^* ₂ and CoCp₂ ⁺, respectively, which accompany Li⁺ insertion and extraction, albeit without attaching the TiO₂ onto the electrode. The reversible chemical lithiation/delithiation and the involved phase transitions are unambiguously confirmed using density functional theory (DFT) calculations, UV‐vis spectroscopy, X‐ray photoelectron spectoscopy (XPS), and Raman spectroscopy. A redox flow lithium‐ion battery (RFLB) half‐cell is assembled and evaluated, which is a critical step towards the development of RFLB full cells.     

High Capacity and High‐Rate NASICON‐Na3.75V1.25Mn0.75(PO4)3 Cathode for Na‐Ion Batteries via Modulating Electronic and Crystal Structures

Sodium superionic conductor (NASICON) cathodes are attractive for Na‐ion battery applications as they exhibit both high structural stability and high sodium ion mobility. Herein, a comprehensive study is presented on the structural and electrochemical properties of the NASICON‐Na_3+yV_2?yMn_y(PO₄)₃ (0 ≤ y ≤ 1) series. A phase miscibility gap is observed at y = 0.5, defining two solid solution domains with low and high Mn contents. Although, members of each of these domains Na_3.25V_1.75Mn_0.25(PO₄)₃ and Na_3.75V_1.25Mn_0.75(PO₄)₃ reversibly exchange sodium ions with high structural integrity, the activity of the Mn³⁺/Mn²⁺ redox couple is found to be absent and present in the former and latter candidate, respectively. Galvanostatic cycling and rate studies reveal higher capacity and rate capability for the Na_3.75V_1.25Mn_0.75(PO₄)₃ cathode (100 and 89 mA h g^?1 at 1C and 5C rate, respectively) in the Na_3+yV_2?yMn_y(PO₄)₃ series. Such a remarkable performance is attributed to optimum bottleneck size (≈5 Ų) and modulated V‐ and Mn‐redox centers as deduced from Rietveld analysis and DFT calculations, respectively. This study shows how important it is to manipulate electronic and crystal structures to achieve high‐performance NASICON cathodes.     

Boosting the Stable Na Storage Performance in 1D Oxysulfide

Exploring new structure prototypes and phases by material design, especially anode materials, is essential to develop high‐performance Na‐ion batteries. This study proposes a new anode, Na₂Cu_2.09O_0.50S₂, with a 1D crystal structure and outstanding Na storage performance. In view of the crystal structure of Na₂Cu_2.09O_0.50S₂, [Cu₄S₄] chains act as electrically conducting units enabling conductivity as high as 0.5 S cm^?1. The residual Na₄[CuO] chains act as ionically conducting units forming rich channels for the fast conduction of Na ions as well as maintaining the structural stability even after Na ion extraction. Additional ball milling on the as‐prepared Na₂Cu_2.09O_0.50S₂ significantly decreases its grain size, achieving a capacity of 588 mA h g^?1 with a high initial Coulombic efficiency of 93% at 0.2 A g^?1. Moreover, the Na₂Cu_2.09O_0.50S₂ anode demonstrates outstanding rate capability (408 mA h g^?1 at 2 A g^?1) and extending cyclic performance (82% of capacity retention after 400 cycles). The general structural design idea based on functional units may offer a new avenue to new electrode materials.     

A 4 V Na+ Intercalation Material in a New Na‐Ion Cathode Family

Large‐scale electrochemical energy storage is a critical factor in the development of renewable energy sources to enable their intermittent power to become dispatchable. In this context, Na‐ion batteries are seen as promising alternatives to Li‐ion batteries, but their advancement requires the discovery of new materials, their electrochemical properties, and a better understanding of structure–property relationships that underpin the electrochemistry. This study presents a new class of Na⁺ insertion materials for Na‐ion batteries. By virtue of its moderately inductive polyanionic framework, the air and moisture stable selenite Na₂Co₂(SeO₃)₃ displays a highly suitable redox potential of ≈ 4 V versus Na/Na⁺ based on the Co²⁺/Co³⁺ couple, rendering it compatible with conventional liquid organic electrolytes. A microwave hydrothermal synthesis route is developed for the rapid synthesis of nanostructured Na₂Co₂(SeO₃)₃ and its conductive graphene oxide composite. The electrochemistry and structural evolution of Na₂Co₂(SeO₃)₃ determined on cycling the cathode in a Na battery was investigated by operando X‐ray diffraction, X‐ray photoelectron spectroscopy, and temperature dependent magnetic susceptibility measurements. These studies reveal good structural and electrochemical reversibility.