Columnar Liquid Crystal Enables In-Situ Dispersing of Excess PbI2 Crystals for Efficient and Stable Perovskite Solar Cells

Excess PbI₂ has been deemed as indispensable component to boost the efficiency of perovskite solar cells (PSCs). However, the random aggregation of PbI₂ crystals seriously disturbs the transport behavior of the carrier and accelerates the degradation of perovskite film. Herein, an effective strategy to in situ disperse excess PbI₂ crystals via the columnar liquid crystal (T6TE) is developed. Rapid self-assembly induced by intermolecular π–π interaction enables T6TE to form the ordered columnar phase with “edge-on” orientation in perovskite. The columnar T6TE can efficiently disperse excess PbI₂ crystals with the merits of strong negative electrostatic potential and highly steric hindrance. Target perovskite deserves preferable crystallization and reconstructed surface, leading to reduced defects density, less residual stress, and efficient carrier transport. Besides, the T6TE significantly impedes the degradation of perovskite film and the formation of Pb⁰ defects. Resultant T6TE-assisted PSCs achieve the champion power conversion efficiency (PCE) of 24.27% for mixed Cs⁺-FA⁺-MA⁺ perovskite. The PCE of a larger area (1 cm²) device reaches to 21.50%. The unencapsulated device maintains ≈85% of the initial PCE after 1500 h storage in the atmosphere with 40–60% relative humidity. This work provides a new strategy to in situ disperse excess PbI₂ by incorporating columnar liquid crystal for the first time.     

Efficient Perovskite Solar Cells Fabricated by Co Partially Substituted Hybrid Perovskite

In the past years, hybrid perovskite materials have attracted great attention due to their superior optoelectronic properties. In this study, the authors report the utilization of cobalt (Co²⁺) to partially substitute lead (Pb²⁺) for developing novel hybrid perovskite materials, CH₃NH₃Pb_1‐xCo_xI₃ (where x is nominal ratio, x = 0, 0.1, 0.2 and 0.4). It is found that the novel perovskite thin films possess a cubic crystal structure with superior thin film morphology and larger grain size, which is significantly different from pristine thin film, which possesses the tetragonal crystal structure, with smaller grain size. Moreover, it is found that the 3d orbital of Co²⁺ ensures higher electron mobilities and electrical conductivities of the CH₃NH₃Pb_1‐xCo_xI₃ thin films than those of pristine CH₃NH₃Pb₄ thin film. As a result, a power conversion efficiency of 21.43% is observed from perovskite solar cells fabricated by the CH₃NH₃Pb_0.9Co_0.1I₃ thin film. Thus, the utilization of Co, partially substituting for Pb to tune physical properties of hybrid perovskite materials provides a facile way to boost device performance of perovskite solar cells.     

Processing‐Performance Evolution of Perovskite Solar Cells: From Large Grain Polycrystalline Films to Single Crystals

Solution‐processable halide perovskites have emerged as strong contenders for next‐generation solar cells owing to their favorable optoelectronic properties. To maintain the efficiency momentum of perovskite solar cells (PSCs), development of advanced processing techniques, particularly for the perovskite layer, is imperative. There is a close correlation between the quality of the perovskite layer and its photophysical properties: Highly crystalline large grains with uniform morphology of the perovskite layer and their interface with charge transporters are crucial for achieving high performance. Significant efforts have been dedicated to achieve perovskite films with large grains reaching the millimeter‐scale for high‐efficiency PSCs. Recent work showcases a transition from large grain polycrystalline to single‐crystalline (SC) PSCs made possible by the facile growth of perovskite single crystals. In this review, the recent progress of the large grain polycrystalline PSCs and grain boundary‐free SC‐PSCs is reported, particularly focusing on the recent approach of depositing large‐grained perovskite layers and single crystal growth technique, that have been adopted for fabrication of efficient PSCs. In addition, prospects of SC‐PSCs and their further development in terms of efficiency, device design, scalability, and stability are discussed.     

Development of Next‐Generation Organic‐Based Solar Cells: Studies on Dye‐Sensitized and Perovskite Solar Cells

Next‐generation organic solar cells such as dye‐sensitized solar cells (DSSCs) and perovskite solar cells (PSCs) are studied at the National Institute of Advanced Industrial Science and Technology (AIST), and their materials, electronic properties, and fabrication processes are investigated. To enhance the performance of DSSCs, the basic structure of an electron donor, π‐electron linker, and electron acceptor, i.e., D–π–A, is suggested. In addition, special organic dyes containing coumarin, carbazole, and triphenylamine electron donor groups are synthesized to find an effective dye structure that avoids charge recombination at electrode surfaces. Meanwhile, PSCs are manufactured using both a coating method and a laser deposition technique. The results of interfacial studies demonstrate that the level of the conduction band edge (CBE) of a compact TiO₂ layer is shifted after TiCl₄ treatment, which strongly affects the solar cell performance. Furthermore, a special laser deposition system is developed for the fabrication of the perovskite layers of PSCs, which facilitates the control over the deposition rate of methyl ammonium iodide used as their precursor.     

Composition Engineering in Doctor‐Blading of Perovskite Solar Cells

Organic–inorganic halide perovskite (OIHP) solar cells with efficiency over 18% power conversion efficiency (PCE) have been widely achieved with lab scale spin‐coating method which is however not scalable for the fabrication of large area solar panels. The PCEs of OIHP solar cells made by scalable deposition methods, such as doctor‐blading or slot‐die coating, have been lagging far behind than spin‐coated devices. In this study the authors report composition engineering in doctor‐bladed OIHP solar cells with p–i–n planar heterojunction structure to enhance their efficiency. Phase purer OIHP thin films are obtained by incorporating a small amount of cesium (Cs⁺) and bromine (Br^?) ions into perovskite precursor solution, which also reduces the required film formation temperature. Pinhole free OIHP thin films with micrometer‐sized grains have been obtained assisted by a secondary grain growth with added methylammonium chloride into the precursor solution. The OIHP solar cells using these bladed thin films achieved PCEs over 19.0%, with the best stabilized PCE reaching 19.3%. This represents a significant step toward scalable manufacture of OIHP solar cells.     

Polymer Doping for High‐Efficiency Perovskite Solar Cells with Improved Moisture Stability

Each component layer in a perovskite solar cell plays an important role in the cell performance. Here, a few types of polymers including representative p‐type and n‐type semiconductors, and a classical insulator, are chosen to dope into a perovskite film. The long‐chain polymer helps to form a network among the perovskite crystalline grains, as witnessed by the improved film morphology and device stability. The dewetting process is greatly suppressed by the cross‐linking effect of the polymer chains, thereby resulting in uniform perovskite films with large grain sizes. Moreover, it is found that the polymer‐doped perovskite shows a reduced trap‐state density, likely due to the polymer effectively passivating the perovskite grain surface. Meanwhile the doped polymer formed a bridge between grains for efficient charge transport. Using this approach, the solar cell efficiency is improved from 17.43% to as high as 19.19%, with a much improved stability. As it is not required for the polymer to have a strict energy level matching with the perovskite, in principle, one may use a variety of polymers for this type of device design.     

Carbon Nanoparticles in High‐Performance Perovskite Solar Cells

In the past few years, organic–inorganic metal halide ABX₃ perovskites (A = Rb, Cs, methylammonium, formamidinium (FA); B = Pb, Sn; X = Cl, Br, I) have rapidly emerged as promising materials for photovoltaic applications. Tuning the film morphology by various deposition techniques and additives is crucial to achieve solar cells with high performance and long‐term stability. In this work, carbon nanoparticles (CNPs) containing functional groups are added to the perovskite precursor solution for fabrication of fluorine‐doped tin oxide/TiO₂/perovskite/spiro‐OMeTAD/gold devices. With the addition of CNPs, the perovskite films are thermally more stable, contain larger grains, and become more hydrophobic. NMR experiments provide strong evidence that the functional groups of the CNPs interact with FA cations already in the precursor solution. The fabricated solar cells show a power‐conversion efficiency of 18% and negligible hysteresis.     

Nonfullerene n‐Type Organic Semiconductors for Perovskite Solar Cells

Compared to inorganic semiconductors and/or fullerene derivatives, nonfullerene n‐type organic semiconductors present some advantages, such as low‐temperature processing, flexibility, and molecule structure diversity, and have been widely used in perovskite solar cells (PSCs). In this research news article, the recent advances in nonfullerene n‐type organic semiconductors which function as electron‐transporting, interface‐modifying, additive, and light‐harvesting materials in PSCs are summarized. The remaining challenges and promising future directions of nonfullerene‐based PSCs are also discussed.     

Fully Solution‐Processed TCO‐Free Semitransparent Perovskite Solar Cells for Tandem and Flexible Applications

Semitransparent perovskite solar cells (st‐PSCs) have received remarkable interest in recent years because of their great potential in applications for solar window, tandem solar cells, and flexible photovoltaics. However, all reported st‐PSCs require expensive transparent conducting oxides (TCOs) or metal‐based thin films made by vacuum deposition, which is not cost effective for large‐scale fabrication: the cost of TCOs is estimated to occupy ≈75% of the manufacturing cost of PSCs. To address this critical challenge, this study reports a low‐temperature and vacuum‐free strategy for the fabrication of highly efficient TCO‐free st‐PSCs. The TCO‐free st‐PSC on glass exhibits 13.9% power conversion efficiency (PCE), and the four‐terminal tandem cell made with the st‐PSC top cell and c‐Si bottom cell shows an overall PCE of 19.2%. Due to the low processing temperature, the fabrication of flexible st‐PSCs is demonstrated on polyethylene terephthalate and polyimide, which show excellent stability under repeated bending or even crumbing.     

Current Collecting Grids for ITO‐Free Solar Cells

Indium‐tin‐oxide (ITO) free polymer solar cells prepared by ink jet printing a composite front electrode comprising silver grid lines and a semitransparent PEDOT:PSS conductor are demonstrated. The effect of grid line density is explored for a large series of devices and a careful modeling study enabling the identification of the most rational grid structure is presented. Both optical and light beam induced current (LBIC) mapping of the devices are used to support the power loss model and to follow the evolution of the performance over time. Current generation is found to be evenly distributed over the active area initially progressing to a larger graduation in areas with different performance. Over time coating defects also become much more apparent in the LBIC images.     

Cold Antisolvent Bathing Derived Highly Efficient Large‐Area Perovskite Solar Cells

Scaling large‐area solar cells is in high demand for the commercialization of perovskite solar cells (PSCs) with a high power‐conversion efficiency (PCE). However, few roll‐to‐roll‐compatible deposition methods for the formation of highly oriented uniform perovskite films are reported. Herein, a facile cold antisolvent bathing approach compatible with large‐area fabrication is introduced. The wet precursor films are submerged in a cold antisolvent bath at 0 °C, and the retarded nucleation and growth kinetics allow highly oriented perovskite to be grown along the [110] and [220] directions, perpendicular to the substrate. The high degree of the preferred crystal orientation benefits the effective charge extraction and reduces the amount of inter‐ and intra‐grain defects inside the perovskite films, improving the PCE from 16.48% (ambient‐bathed solar cell) to 18.50% (cold‐bathed counterpart). The cold antisolvent bathing method is employed for the fabrication of large‐area (8 × 10 cm²) PSCs with uniform photovoltaic device parameters, thereby verifying the scale‐up capability of the method.     

Dual Interfacial Modifications Enable High Performance Semitransparent Perovskite Solar Cells with Large Open Circuit Voltage and Fill Factor

In this work, both anode and cathode interfaces of p‐i‐n CH₃NH₃PbI₃ perovskite solar cells (PVSCs) are simultaneously modified to achieve large open‐circuit voltage (V_oc) and fill factor (FF) for high performance semitransparent PVSCs (ST‐PVSCs). At the anode, modified NiO serves as an efficient hole transport layer with appropriate surface property to promote the formation of smooth perovskite film with high coverage. At the cathode, a fullerene bisadduct, C₆₀(CH₂)(Ind), with a shallow lowest unoccupied molecular orbital level, is introduced to replace the commonly used phenyl‐C₆₁‐butyric acid methyl ester (PCBM) as an alternative electron transport layer in PVSCs for better energy level matching with the conduction band of the perovskite layer. Therefore, the V_oc, FF and power conversion efficiency (PCE) of the PVSCs increase from 1.05 V, 0.74 and 16.2% to 1.13 V, 0.80 and 18.1% when the PCBM is replaced by C₆₀(CH₂)(Ind). With the advantages of high V_oc and FF, ST‐PVSCs are also fabricated using an ultrathin transparent Ag as cathode, showing an encouraging PCEs of 12.6% with corresponding average visible transmittance (AVT) over 20%. These are the highest PCEs reported for ST‐PVSCs with similar AVTs paving the way for using ST‐PVSCs as power generating windows.     

Toward Long‐Term Stable and Highly Efficient Perovskite Solar Cells via Effective Charge Transporting Materials

Perovskite solar cells (PSCs) have advanced quickly with their power conversion efficiency approaching the record of silicon solar cells. However, there is still a big challenge to obtain both high efficiency and long‐term stability for future commercialization of PSCs. The major instability issue is associated with the decomposition or phase transition of perovskite materials that are believed to be intrinsically unstable under outdoor working conditions. Herein, the authors review the approaches that marked important progress in developing new functional electron/hole transporting materials that enabled highly efficient and stable PSCs. The findings that accelerate charge diffusion and that suppress the irrevocable loss of ions diffusing out of perovskite materials and other diffusion processes are highlighted. In addition, derivative interface engineering methods to control the diffusion process of charges/ions/molecules are also reviewed. Finally, the authors propose key research issues in charge transporting materials and interface engineering with regard to the important diffusion processes that will be one of the keys to realize highly efficient and long‐term stable PSCs.