首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
  相似文献   

2.
    
2D Ruddlesden–Popper perovskites (RPPs) have recently drawn significant attention because of their structural variability that can be used to tailor optoelectronic properties and improve the stability of derived photovoltaic devices. However, charge separation and transport in 2D perovskite solar cells (PSCs) suffer from quantum well barriers formed during the processing of perovskites. It is extremely difficult to manage phase distributions in 2D perovskites made from the stoichiometric mixtures of precursor solutions. Herein, a generally applicable guideline is demonstrated for precisely controlling phase purity and arrangement in RPP films. By visually presenting the critical colloidal formation of the single‐crystal precursor solution, coordination engineering is conducted with a rationally selected cosolvent to tune the colloidal properties. In nonpolar cosolvent media, the derived colloidal template enables RPP crystals to preferentially grow along the vertically ordered alignment with a narrow phase variation around a target value, resulting in efficient charge transport and extraction. As a result, a record‐high power conversion efficiency (PCE) of 14.68% is demonstrated for a (TEA)2(MA)2Pb3I10 (n = 3) photovoltaic device with negligible hysteresis. Remarkably, superior stability is achieved with 93% retainment of the initial efficiency after 500 h of unencapsulated operation in ambient air conditions.  相似文献   

3.
    
Organic–inorganic hybrid perovskite solar cells (PSCs) have become a promising candidate in the photovoltaic field due to their high power conversion efficiency and low material cost. However, the development of PSCs is limited by their poor stability under practical conditions in the presence of oxygen, moisture, sunlight, heat, and the current–voltage (I–V) hysteresis. In particular, the hysteretic I–V issue casts doubt on the validity of the photovoltaic performance results that are achieved, making it difficult to evaluate the authentic performance of PSCs. This review article focuses on understanding the I–V hysteresis behavior in PSCs and on exploring the possible reasons leading to this hysteresis phenomenon. The various strategies attempted to suppress the I–V hysteresis in PSCs are summarized, and a brief future recommendation is provided.  相似文献   

4.
    
The discovery of unique optoelectronic properties of 3D ABX3 perovskites has produced a great impact on the field of photovoltaics. In the initial years after the breakthrough, interest has focused on a limited number of 3D ABX3 perovskite materials, including the archetypal CH3NH3PbI3 and its counterparts. Undoubtedly, the main limitation of perovskite devices is their low stability due the fast degradation of the perovskite layer; however, the high toxicity of Pb also poses a concern. Herein, the recent increasing number of articles reporting the theoretical modeling, synthesis, optoelectronic characterization, and implementation of alternative perovskite materials in solar devices is summarized. The extensive variety of perovskite derivatives is classified according to the material dimensionality and the crystal structure. The particular strengths and weaknesses for each novel material are discussed, and the device performance and potential stability enhancements are also highlighted.  相似文献   

5.
    
Organic‐inorganic metal halide perovskite solar cells show hysteresis in their current–voltage curve measured at a certain voltage sweep rate. Coinciding with a slow transient current response, the hysteresis is attributed to a slow voltage‐driven (ionic) charge redistribution in the perovskite solar cell. Thus, the electric field profile and in turn the electron/hole collection efficiency become dependent on the biasing history. Commonly, a positive prebias is beneficial for a high power‐conversion efficiency. Fill factor and open‐circuit voltage increase because the prebias removes the driving force for charge to pile‐up at the electrodes, which screen the electric field. Here, it is shown that the piled‐up charge can also be beneficial. It increases the probability for electron extraction in case of extraction barriers due to an enhanced electric field allowing for tunneling or dipole formation at the perovskite/electrode interface. In that case, an inverted hysteresis is observed, resulting in higher performance metrics for a voltage sweep starting at low prebias. This inverted hysteresis is particularly pronounced in mixed‐cation mixed‐halide systems which comprise a new generation of perovskite solar cells that makes it possible to reach power‐conversion efficiencies beyond 20%.  相似文献   

6.
    
The measurement of the ideality factor (nid) is a popular tool to infer the dominant recombination type in perovskite solar cells (PSC). However, the true meaning of its values is often misinterpreted in complex multilayered devices such as PSC. In this work, the effects of bulk and interface recombination on the nid are investigated experimentally and theoretically. By coupling intensity‐dependent quasi‐Fermi level splitting measurements with drift diffusion simulations of complete devices and partial cell stacks, it is shown that interfacial recombination leads to a lower nid compared to Shockley–Read–Hall (SRH) recombination in the bulk. As such, the strongest recombination channel determines the nid of the complete cell. An analytical approach is used to rationalize that nid values between 1 and 2 can originate exclusively from a single recombination process. By expanding the study over a wide range of the interfacial energy offsets and interfacial recombination velocities, it is shown that an ideality factor of nearly 1 is usually indicative of strong first‐order non‐radiative interface recombination and that it correlates with a lower device performance. It is only when interface recombination is largely suppressed and bulk SRH recombination dominates that a small nid is again desirable.  相似文献   

7.
    
Over 25% efficiencies have been achieved by organic–inorganic hybrid perovskite solar cells (PSCs). However, their practical applications are limited by the instability of the hybrid perovskite materials. Replacing hybrid perovskites with inorganic CsPbX3 perovskites shows great promise to address the above issue and much progress has been made. To achieve high efficiency and stable inorganic CsPbX3 PSCs, organic molecular engineering has been playing a vital role. Herein, the progress of the organic molecular engineering in inorganic CsPbX3 PSCs is systematically reviewed. First, structure evolution induced by organic molecular engineering for inorganic CsPbX3 perovskites is demonstrated. Then, organic molecular engineering in CsPbX3 PSCs is categorized and reviewed (alloying in perovskite structures, as sacrificial agents, forming 2D structures, and modifying surfaces and interfaces). Finally, future research directions are suggested to further improve the performance of inorganic PSCs.  相似文献   

8.
    
State‐of‐the‐art perovskite solar cells (PSCs) have bandgaps that are invariably larger than 1.45 eV, which limits their theoretically attainable power conversion efficiency. The emergent mixed‐(Pb, Sn) perovskites with bandgaps of 1.2–1.3 eV are ideal for single‐junction solar cells according to the Shockley–Queisser limit, and they have the potential to deliver higher efficiency. Nevertheless, the high chemical activity of Sn(II) in these perovskites makes it extremely challenging to control their physical properties and chemical stability, thereby leading to PSCs with relatively low PCE and stability. In this work, the authors employ the Lewis‐adduct SnF2·3FACl additive in the solution‐processing of ideal‐bandgap halide perovskites (IBHPs), and prepare uniform large‐grain perovskite thin films containing continuously functionalized grain boundaries with the stable SnF2 phase. Such Sn(II)‐rich grain‐boundary networks significantly enhance the physical properties and chemical stability of the IBHP thin films. Based on this approach, PSCs with an ideal bandgap of 1.3 eV are fabricated with a promising efficiency of 15.8%, as well as enhanced stability. The concept of Lewis‐adduct‐mediated grain‐boundary functionalization in IBHPs presented here points to a new chemical route for approaching the Shockley–Queisser limit in future stable PSCs.  相似文献   

9.
    
Hybrid halide 2D perovskites deserve special attention because they exhibit superior environmental stability compared with their 3D analogs. The closer interlayer distance discovered in 2D Dion–Jacobson (DJ) type of halide perovskites relative to 2D Ruddlesden–Popper (RP) perovskites implies better carrier charge transport and superior performance in solar cells. Here, the structure and properties of 2D DJ perovskites employing 3‐(aminomethyl)piperidinium (3AMP2+) as the spacing cation and a mixture of methylammonium (MA+) and formamidinium (FA+) cations in the perovskite cages are presented. Using single‐crystal X‐ray crystallography, it is found that the mixed‐cation (3AMP)(MA0.75FA0.25)3Pb4I13 perovskite has a narrower bandgap, less distorted inorganic framework, and larger Pb? I? Pb angles than the single‐cation (3AMP)(MA)3Pb4I13. Furthermore, the (3AMP)(MA0.75FA0.25)3Pb4I13 films made by a solvent‐engineering method with a small amount of hydriodic acid have a much better film morphology and crystalline quality and more preferred perpendicular orientation. As a result, the (3AMP)(MA0.75FA0.25)3Pb4I13‐based solar cells exhibit a champion power conversion efficiency of 12.04% with a high fill factor of 81.04% and a 50% average efficiency improvement compared to the pristine (3AMP)(MA)3Pb4I13 cells. Most importantly, the 2D DJ 3AMP‐based perovskite films and devices show better air and light stability than the 2D RP butylammonium‐based perovskites and their 3D analogs.  相似文献   

10.
    
CsPbI2Br is emerging as a promising all‐inorganic material for perovskite solar cells (PSCs) due to its more stable lattice structure and moisture resistance compared to CsPbI3, although its device performance is still much behind this counterpart. Herein, a preannealing process is developed and systematically investigated to achieve high‐quality CsPbI2Br films by regulating the nucleation and crystallization of perovskite. The preannealing temperature and time are specifically optimized for a dopant‐free poly(3‐hexylthiophene) (P3HT)‐based device to target dopant‐induced drastic performance degradation for spiro‐OMeTAD‐based devices. The resulting P3HT‐based device exhibits comparable power conversion efficiency (PCE) to spiro‐OMeTAD‐based devices but much enhanced ambient stability with over 95% PCE after 1300 h. A diphenylamine derivative is introduced as a buffer layer to improve the energy‐level mismatch between CsPbI2Br and P3HT. A record‐high PCE of 15.50% for dopant‐free P3HT‐based CsPbI2Br PSCs is achieved by alleviating the open‐circuit voltage loss with the buffer layer. These results demonstrate that the preannealing processing together with a suitable buffer layer are applicable strategies for developing dopant‐free P3HT PSCs with high efficiency and stability.  相似文献   

11.
    
  相似文献   

12.
    
Chemical bonding dictates not only the optoelectronic properties of materials, but also the intrinsic and extrinsic stability of materials. Here, the causes of intrinsic and extrinsic instability of perovskite materials are reviewed considering their correlation with the unique chemical‐bonding nature of perovskite materials. There are a number of key standardized stability tests established by the International Electrotechnical Commission for commercialized photovoltaic modules. Based on these procedures, the possible causes and related mechanisms of the material degradation that can arise during the test procedures are identified, which are discussed in terms of their chemical bonds. Based on the understanding of the critical causes, promising strategies for mitigating the causes to enhance the stability of perovskite solar cells are summarized. The stability of the state‐of‐the‐art perovskite solar cells implies a need for the development of improved stability‐testing protocols to move onto the next stage toward commercialization.  相似文献   

13.
    
With the rapid progress in developing hybrid perovskite solar cells, the allure of current density–voltage ( J–V) hysteresis has attracted quite a lot of interest in the research community. It requires feasible approaches that further deepen the fundamental understanding of device physics in specific device architecture in order to solve this problem eventually. Here, perovskite solar cells configured with different counter electrodes are systematically investigated with the focus on charge accumulation within the devices responsible for J–V hysteresis. The results indicate that J–V hysteresis is affected by charge accumulation which can be modulated by carrier extraction efficiency of the electrodes. Through a rationally induced interfacial dipole, the devices have shown improvement in carrier extraction, which thus reduces J–V hysteresis significantly. It provides solid evidence for the proposition that interface charge plays an important role in J–V hysteresis, and demonstrates an applicable strategy that effectively alleviates J–V hysteresis in perovskite solar cells.  相似文献   

14.
    
The preparation of ZnO structured films designed to act as electron transport layers in efficient ZnO/perovskite CH3NH3PbI3/spirobifluorene (spiro‐OMeTAD) solid‐state solar cells by electrochemical deposition is reported. Well‐conducting ZnO layers are deposited in chloride medium and grown with tailored (nano)structures ranging from arrays of nanowires to a compact, well‐covering film. Moreover, the effect of a thin intermediate overlayer of ZnO conformally electrodeposited in nitrate medium and with a low n‐type doping (i‐ZnO) is discussed. The results show higher power conversion efficiencies for the nanostructured oxide layers compared to the dense one. Moreover, the presence of the i‐ZnO layer is shown to markedly improve the cell short‐circuit current and the open‐circuit voltage due to charge recombination reduction. For the best cells, the active layers efficiently absorb light over a large spectral range from near‐UV to near infrared region and exhibit excellent charge collection efficiencies. Solar cells based on an optimized design generate a very large photocurrent and the power conversion efficiency at one sun is as high as 10.28%.  相似文献   

15.
    
Quantum dot sensitized solar cells (QDSSCs) have experienced a continuous performance growth in the past years presenting a photoconversion efficiency > 13%. QDSSCs constitute a smart approach to take advantage of the properties of semiconductor quantum dots (QDs), mitigating the transport constrains. In contrast with other QD solar cell configurations, for QDSSCs, the record efficiencies have been reported with Pb and Cd‐free based sensitizers. The development of techniques in order to provide photoanodes with very high QD loading and the discovery of new electrolytes, including all solid configurations, are the most important future challenges that this technology must address to further increase cell performance and stability.  相似文献   

16.
    
Lead halide perovskites have recently emerged as promising absorbers for fabricating low‐cost and high‐efficiency thin‐film solar cells. The record power conversion efficiency of lead halide perovskite‐based solar cells has rapidly increased from 3.8% in 2009 to 22.1% in early 2016. Such rapid improvement is attributed to the superior and unique photovoltaic properties of lead halide perovskites, such as the extremely high optical absorption coefficients and super‐long photogenerated carrier lifetimes and diffusion lengths that are not seen in any other polycrystalline thin‐film solar cell materials. In the past a few years, theoretical approaches have been extensively applied to understand the fundamental mechanisms responsible for the superior photovoltaic properties of lead halide perovskites and have gained significant insights. This review article highlights the important theoretical results reported in literature for the understanding of the unique structural, electronic, optical, and defect properties of lead halide perovskite materials. For comparison, we also review the theoretical results reported in literature for some lead‐free perovskites, double perovskites, and nonperovskites.  相似文献   

17.
    
The halide perovskite (PVSK) materials (with ABX3 formulation) have emerged as “dream materials” for photovoltaic (PV) applications due to their remarkable physical properties such as high optical absorption coefficient, carrier mobility, long carrier diffusion lengths, etc. These properties have enabled the PV devices to reach higher than 20% power conversion efficiencies (PCE) in record time. The further pursuit of higher PCE and improved stability brings forth increasing interests in so‐called “mixed composition” PVSK materials, consisting of partial substitution of the A, B, and/or X‐sites with alternative elements/molecules of similar size. Herein, we highlight the recent advances in developing mixed PVSK for PVs and their relevant optoelectronic properties. We mainly focus on mixed PVSK materials in the form of polycrystalline thin films, but also discuss nanostructured and two‐dimensional (2D) PVSK materials due to the increasing interest of broad readership. Efforts are exerted to elucidate the design principles of mixed PVSK and fabrication techniques for high performance optoelectronic devices, which help deepen our fundamental understanding of mixed PVSK systems. We hope this review will shed light onto the design and synthesis of mixed PVSK materials to further the progress of PVSK photovoltaics towards higher efficiencies and longer lifetimes.  相似文献   

18.
    
Methylammonium lead iodide (MAPbI3) perovskites are organic–inorganic semiconductors with long carrier diffusion lengths serving as the light‐harvesting component in optoelectronics. Through a substitutional growth of MAPbI3 catalyzed by polar protic alcohols, evidence is shown for their substrate‐ and annealing‐free production and use of toxic solvents and high temperature is prevented. The resulting variable‐sized crystals (≈100 nm–10 µm) are found to be tetragonally single‐phased in alcohols and precipitated as powders that are metallic‐lead‐free. A comparatively low MAPbI3 yield in toluene supports the role of alcohol polarity and the type of solvent (protic vs aprotic). The theoretical calculations suggest that overall Gibbs free energy in alcohols is lowered due to their catalytic impact. Based on this alcohol‐catalyzed approach, MAPbI3 is obtained, which is chemically stable in air up to ≈1.5 months and thermally stable (≤300 °C). This method is amendable to large‐scale manufacturing and ultimately can lead to energy‐efficient, low‐cost, and stable devices.  相似文献   

19.
    
Perovskite solar cells (PSCs) exhibit a series of distinctive features in their optoelectronic response which have a crucial influence on the performance, particularly for long‐time response. Here, a survey of recent advances both in device simulation and optoelectronic and photovoltaic responses is provided, with the aim of comprehensively covering recent advances. Device simulations are included with clarifying discussions about the implications of classical drift–diffusion modeling and the inclusion of ionic charged layers near the outer carrier selective contacts. The outcomes of several transient techniques are summarized, along with the discussion of impedance and capacitive responses upon variation of bias voltage and irradiance level. In relation to the capacitive response, a discussion on the J–V curve hysteresis is also included. Although alternative models and explanations are included in the discussion, the review relies upon a key mechanism able to yield most of the rich experimental responses. Particularly for state‐of‐the‐art solar cells exhibiting efficiencies around or exceeding 20%, outer interfaces play a determining role on the PSC's performance. The ionic and electronic kinetics in the vicinity of the interfaces, coupled to surface recombination and carrier extraction mechanisms, should be carefully explored to progress further in performance enhancement.  相似文献   

20.
    
The disorderly distribution of defects in the perovskite or at the grain boundaries, surfaces, and interfaces, which seriously affect carrier transport through the formation of nonradiative recombination centers, hinders the further improvement on the power conversion efficiency (PCE) of perovskite solar cells (PSCs). Several defect passivation strategies have been confirmed as an efficient approach for promoting the performance of PSCs. Herein, recent progress in the defect passivation toward efficient perovskite solar cells are summarized, and a classification of common passivation strategies that elaborate the mechanism according to the location of the defects and the type of passivation agent is presented. Finally, this review offers likely prospects for future trends in the development of passivation strategies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号