Excitons in Metal‐Halide Perovskites

The unprecedented increase of the power conversion efficiency of metal‐halide perovskite solar cells has significantly outpaced the understanding of their fundamental properties. One of the biggest puzzles of perovskites has been the exciton binding energy, which has proved to be difficult to determine experimentally. Many contradictory reports can be found in the literature with values of the exciton binding energy from a few meV to a few tens of meV. In this review the results of the last few years of intense investigation of the exciton physic in perovskite materials are summarized. In particular a critical overview of the different experimental approaches used to determine exciton binding energy is provided. The problem of exciton binding energy in the context of the polar nature of perovskite crystals and related polaron effects which have been neglected to date in most of work is discussed. It is shown that polaron effects can reconcile at least some of the experimental observations and controversy present in the literature. Finally, the current status of the exciton fine structure in perovskite materials is summarized. The peculiar carrier–phonon coupling can help to understand the intriguing efficiency of light emission from metal‐halide perovskites.     

Optical Absorption‐Based In Situ Characterization of Halide Perovskites

Halide perovskites have emerged as materials for high‐performance optoelectronic devices. Often, progress made to date in terms of higher efficiency and stability is based on increasing material complexity, i.e., formation of multicomponent halide perovskites with multiple cations and anions. In this review article, the use of in situ optical methods, namely, photoluminescence (PL) and UV‐vis, that provide access to the relevant time and length scales to ascertain chemistry–property relationships by monitoring evolving properties is discussed. Additionally, because halide perovskites are electron/ion conductors and prone to solid‐state ion transport under various external stimuli, application of these optical methods in the context of ionic movement is described to reveal mechanistic insights. Finally, examples of using in situ PL and UV‐vis to study degradation and phase transitions are reviewed to demonstrate the wealth of information that can be obtained regarding many different aspects of ongoing research activities in the field of halide perovskites.     

Progress in Theoretical Study of Metal Halide Perovskite Solar Cell Materials

Lead halide perovskites have recently emerged as promising absorbers for fabricating low‐cost and high‐efficiency thin‐film solar cells. The record power conversion efficiency of lead halide perovskite‐based solar cells has rapidly increased from 3.8% in 2009 to 22.1% in early 2016. Such rapid improvement is attributed to the superior and unique photovoltaic properties of lead halide perovskites, such as the extremely high optical absorption coefficients and super‐long photogenerated carrier lifetimes and diffusion lengths that are not seen in any other polycrystalline thin‐film solar cell materials. In the past a few years, theoretical approaches have been extensively applied to understand the fundamental mechanisms responsible for the superior photovoltaic properties of lead halide perovskites and have gained significant insights. This review article highlights the important theoretical results reported in literature for the understanding of the unique structural, electronic, optical, and defect properties of lead halide perovskite materials. For comparison, we also review the theoretical results reported in literature for some lead‐free perovskites, double perovskites, and nonperovskites.     

Tin Halide Perovskites: Progress and Challenges

The chemical composition engineering of lead halide perovskites via a partial or complete replacement of toxic Pb with tin has been widely reported as a feasible process due to the suitable ionic radius of Sn and its possibility of existing in the +2 state. Interestingly, a complete replacement narrows the bandgap while a partial replacement gives an anomalous phenomenon involving a further narrowing of bandgap relative to the pure Pb and Sn halide perovskite compounds. Unfortunately, the merits of this anomalous behavior have not been properly harnessed. Although promising progress has been made to advance the properties and performance of Sn‐based perovskite systems, their photovoltaic (PV) parameters are still significantly inferior to those of the Pb‐based analogs. This review summarizes the current progress and challenges in the preparation, morphological and photophysical properties of Sn‐based halide perovskites, and how these affect their PV performance. Although it can be argued that the Pb halide perovskite systems may remain the most sought after technology in the field of thin film perovskite PV, prospective research directions are suggested to advance the properties of Sn halide perovskite materials for improved device performance.     

Progress of Lead‐Free Halide Double Perovskites

The field of halide metal perovskite photovoltaics has caught widespread interest in the last decade. This is seen in the rapid rise of power conversion efficiency, which is currently over 23%. It has also stimulated a widespread application of halide metal perovskites in other fields, such as light‐emitting diodes, field‐effect transistors, detectors, and lasers. Despite the fascinating characteristics of the halide metal perovskites, the presence of toxic lead (Pb) in their chemical composition is regarded as one of the major limiting factors preventing their commercialization. Addressing the toxicity issues in these compounds by a careful and strategic replacement of Pb²⁺ with other nontoxic candidate elements represents a promising direction to fabricate lead‐free optoelectronic devices. Such attempts yield a halide double perovskite structure which allows flexibility for various compositional adjustments. Here, the authors present the current progress and setbacks in crystal structures, materials preparation, optoelectronic properties, stability, and photovoltaic applications of lead‐free halide double perovskite compounds. Prospective research directions to improve the optoelectronic properties of existing materials are given that may help in the discovery of new lead‐free halide double perovskites.     

Electron‐Beam‐Related Studies of Halide Perovskites: Challenges and Opportunities

Electron beam microscopy and related characterization techniques play an important role in revealing the microstructural, morphological, physical, and chemical information of halide perovskites and their impact on associated optoelectronic devices. However, electron beam irradiation usually causes damage to these beam‐sensitive materials, negatively impacting their device performance, and complicating this interpretation. In this article, the electron microscopy and spectroscopy techniques are reviewed that are crucial for the understanding of the crystallization and microstructure of halide perovskites. In addition, special attention is paid to assessing and mitigating the electron beam‐induced damage caused by these techniques. Since the halide perovskites are fragile, a protocol involving delicate control of both electron beam dose and dose rate, coupled with careful data analysis, is key to enable the acquisition of reliable structural and compositional information such as atomic‐resolution images, chemical elemental mapping and electron diffraction patterns. Limiting the electron beam dose is critical parameter enabling the characterization of various halide perovskites. Novel methods to unveil the mechanisms of device operation, including charge carrier generation, diffusion, and extraction are presented in scanning electron microscopy studies combined with electron‐beam‐induced current and cathodoluminescence mapping. Future opportunities for electron‐beam‐related characterizations of halide perovskites are also discussed.     

The Impact of Atmosphere on Energetics of Lead Halide Perovskites

Solar cells based on metal halide perovskites have emerged as a promising low‐cost photovoltaic technology. In contrast to inert atmospheres where most of the lab‐scale devices are made to date, large‐area low‐cost production of perovskite solar cells often involves processing of perovskites in various atmospheres including ambient air, nitrogen, and/or vacuum. Herein, the impact of atmosphere on the energy levels of methylammonium lead halide perovskite films is systematically investigated. The atmosphere is varied to simulate the typical fabrication process. Through a comprehensive analysis combining the Fermi level evolution, surface photovoltage, photoluminescence properties, photovoltaic performance, and device simulation, an overall landscape of the energy diagram of the perovskite layer is able to be determined. The findings have direct implications for real‐world devices under typical atmospheres, and provide insights into the fabrication‐process design and optimization. Furthermore, a universal Fermi level shift under vacuum for lead halide‐based perovskites revealed in this study, urges a refreshed view on the energetics studies conducted without considering the atmospheric effect.     

The Application of Electron Backscatter Diffraction on Halide Perovskite Materials

Recently, the application of electron backscatter diffraction (EBSD) in halide perovskites has enabled the correlation of the micro‐structural arrangement of polycrystalline grains with other properties (optical, electrical, mechanical, and chemical) in a “pixel‐by‐pixel” approach. Most studies so far have used an ultra‐sensitive electron beam detector that has sensitivity thousands of times higher than a traditional scintillator screen and charge coupled device camera, enabling much lower beam currents. An alternative approach has been the use of low vacuum measurement conditions to avoid charge buildup that leads to damage. This review focuses on introducing the classical EBSD technique to the halide perovskite community, where it has been highly underutilized due to beaminduced damage in these relatively unstable materials. Recent research is used to dispel some common misconceptions about grain boundaries in halide perovskites and highlight what has been learned by comparing and correlating EBSD with other techniques. Additionally, the remaining limitations, development challenges, and future of the EBSD technique for halide perovskites are discussed. Successful utilization of the EBSD technique as a common characterization tool in the halide perovskite community will enable scientists and engineers to develop maps of cross correlated properties, helping to unlock the full potential of this complex material system.     

Metal Oxides as Efficient Charge Transporters in Perovskite Solar Cells

Over the past few years, hybrid halide perovskites have emerged as a highly promising class of materials for photovoltaic technology, and the power conversion efficiency of perovskite solar cells (PSCs) has accelerated at an unprecedented pace, reaching a record value of over 22%. In the context of PSC research, wide‐bandgap semiconducting metal oxides have been extensively studied because of their exceptional performance for injection and extraction of photo‐generated carriers. In this comprehensive review, we focus on the synthesis and applications of metal oxides as electron and hole transporters in efficient PSCs with both mesoporous and planar architectures. Metal oxides and their doped variants with proper energy band alignment with halide perovskites, in the form of nanostructured layers and compact thin films, can not only assist with charge transport but also improve the stability of PSCs under ambient conditions. Strategies for the implementation of metal oxides with tailored compositions and structures, and for the engineering of their interfaces with perovskites will be critical for the future development and commercialization of PSCs.     

Addressing Toxicity of Lead: Progress and Applications of Low‐Toxic Metal Halide Perovskites and Their Derivatives

Metal halide perovskites have been brought to the forefront of research focus in solution‐processable photovoltaics, with the device efficiency swiftly surging to over 22% over the past few years. The state‐of‐the‐art metal halide perovskites that have been intensively investigated include toxic lead, which potentially hampers their commercialization process. To address this toxicity issue, intensive recent research effort has been devoted to developing low‐toxic metal halide perovskites and their derivatives for photovoltaic applications. Herein, the recent research progress achieved so far in addressing the toxicity issue of lead halide perovskites in photovoltaics is summarized. By comparing the merits and drawbacks of different low‐toxic metal halide systems, the current challenges and opportunities in the photovoltaic field are highlighted. Potential low‐toxic metal halide perovskites and their derivatives are also discussed from the perspective of theoretical calculations. Furthermore, promising applications of low‐toxic metal halide perovskites beyond the photovoltaic sector are briefly discussed.     

Interface Engineering Driven Stabilization of Halide Perovskites against Moisture,Heat, and Light for Optoelectronic Applications

Moisture, heat, and light instabilities of halide perovskites (HPs) represent a serious Achilles' heel that must be overcome, to enable future advancements in perovskite‐based optoelectronic devices such as solar cells and light‐emitting diodes. The instabilities are attributed to the unavoidable fragile ionic bonding between cationic and anionic parts of HPs during their formation. Surface passivation of HPs by various surface‐passivating materials has proven to be an attractive approach to stabilize perovskites against moisture, heat, and light, keeping intact their structural integrity and ionic bonding. Herein, the experimental and theoretical background for degradation mechanisms of HPs is reviewed along with various surface passivating materials to stabilize HPs. Finally, the existing challenges associated with thin‐film and device fabrication and an outlook for improving the stability of perovskites in optoelectronics are presented     

“Russian doll” complexes of [n]cycloparaphenylenes: a theoretical study

The formation of "Russian doll" complexes consisting of [n]cycloparaphenylenes was predicted using quantum chemistry tools. The electronic structures of multiple inclusion complexes containing up to four macrocycles were explored at the M06-2X/6-31G* level of theory. The binding energy between the macrocycles increases from the center to the periphery of the complex and can be >60?kcal?mol(-1) for macrocycles containing 14 and 19 repeating units. It has been demonstrated that additional electrostatic interactions originating from the asymmetric electron density distribution observed when comparing the concave and convex macrocycle sides are responsible for the high binding energies in these Russian doll complexes. Oxidation or reduction of the Russian doll complexes creates polarons that are delocalized across the complexes. In the case of polaron cations, most of the polarons are localized at the macrocycle with the smallest ionization potential; for polaron anions, the negative charge is localized across the outer rings of the complex. Because anion polarons are more delocalized than cation polarons, the relaxation energies of the polaron anions were found to be smaller than those of the polaron cations.     

Metal Halide Perovskite Materials for Solar Cells with Long‐Term Stability

Metal halide perovskite solar cells (PSCs) have emerged as promising candidates for photovoltaic technology with their power conversion efficiencies over 23%. For prototypical organic–inorganic metal halide perovskites, their intrinsic instability poses significant challenges to the commercialization of PSCs. Recently, the scientific community has done tremendous work in composition engineering to develop more robust light‐absorbing layers, including mixed‐ion hybrid perovskites, low‐dimensional hybrid perovskites, and all‐inorganic perovskites. This review provides an overview of the impact of these perovskites on the efficiency and long‐term stability of PSCs.     

A Review and Perspective on Cathodoluminescence Analysis of Halide Perovskites

Halide perovskite solar cells have achieved a certified efficiency of 25.2%, surpassing CdTe and CuInGaSe₂, which have long been regarded as the most‐efficient thin‐film photovoltaic materials. As this exciting class of materials continues to mature, researchers will require characterization techniques capable of exposing the interplay among structure, chemistry, and optoelectronic properties to inform processing strategies and increase both device efficiencies and long‐term stability. Cathodoluminescence microscopy is an ideal technique to provide such information due to the high spatial resolution and robust optical information acquired. Here, the current body of work related to cathodoluminescence analysis of halide perovskite materials for optoelectronic applications is surveyed. This review demonstrates how cathodoluminescence can monitor degradation due to environmental stressors, phase segregation resulting from material processing, and other halide perovskite‐centric material issues. A persistent concern associated with e‐beam‐based analysis of halide perovskites is what effect the electron beam has on the material properties being probed. Addressing this, a detailed discussion is provided on the origin of the cathodoluminescence signal and a review of studies focused on revealing changes in the properties of halide perovskites resulting from e‐beam excitation. Finally, a perspective on future opportunities to expand the role of cathodoluminescence analysis for halide perovskites is provided.     

Inorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells

Recently, the stability of organic–inorganic perovskite thin films under thermal, photo, and moisture stresses has become a major concern for further commercialization due to the high volatility of the organic cations in the prototype perovskite composition (CH₃NH₃PbI₃). All inorganic cesium (Cs) based perovskite is an alternative to avoid the release or decomposition of organic cations. Moreover, substituting Pb with Sn in the organic–inorganic lead halide perovskites has been demonstrated to narrow the bandgap to 1.2–1.4 eV for high‐performance perovskite solar cells. In this work, a series of CsPb_1?xSn_xIBr₂ perovskite alloys via one‐step antisolvent method is demonstrated. These perovskite films present tunable bandgaps from 2.04 to 1.64 eV. Consequently, the CsPb_0.75Sn_0.25IBr₂ with homogeneous and densely crystallized morphology shows a remarkable power conversion efficiency of 11.53% and a high V_oc of 1.21 V with a much improved phase stability and illumination stability. This work provides a possibility for designing and synthesizing novel inorganic halide perovskites as the next generation of photovoltaic materials.     

X‐Ray Microscopy of Halide Perovskites: Techniques,Applications, and Prospects

X‐ray microscopy can provide unique chemical, electronic, and structural insights into perovskite materials and devices leveraging bright, tunable synchrotron X‐ray sources. Over the last decade, fundamental understanding of halide perovskites and their impressive performance in optoelectronic devices has been furthered by rigorous research regarding their structural and chemical properties. Herein, studies of perovskites are reviewed that have used X‐ray imaging, spectroscopy, and scattering microscopies that have proven valuable tools toward understanding the role of defects, impurities, and processing on perovskite material properties and device performance. Together these microscopic investigations have augmented the understanding of the internal workings of perovskites and have helped to steer the perovskite community toward promising directions. In many ways, X‐ray microscopy of perovskites is still in its infancy, which leaves many exciting paths unexplored including new ptychographic, multimodal, in situ, and operando experiments. To explore possibilities, pioneering X‐ray microscopy along these lines is briefly highlighted from other semiconductor systems including silicon, CdTe, GaAs, CuIn_xGa_1?xSe₂, and organic photovoltaics. An overview is provided on the progress made in utilizing X‐ray microscopy for perovskites and present opportunities and challenges for future work.     

Structural and Electronic Impact of an Asymmetric Organic Ligand in Diammonium Lead Iodide Perovskites

Reduced dimensionality forms of perovskites with alternating layers of organic ligands are a promising class of materials for achieving stable perovskite solar cells. Most work until now has focused on phases utilizing two ammonium terminated ligands per formula unit. However, phases utilizing a single diammonium ligand per formula unit are advantageous in that they can potentially have a thinner insulating organic layer between Pb‐halide layers, yet the structural effects on their optoelectronic properties are not yet well understood. In this study two organic ligands, butane 1,4‐diammonium (BDA) and N,N‐dimethylpropane diammonium (DMPD), are investigated as spacers in n = 1, 2D perovskites. Using ultraviolet and inverse photoelectron spectroscopies, BDAPbI₄ is shown to have a larger transport gap by 350 meV and a larger exciton binding energy by 140 meV than DMPDPbI₄. Through density functional theory calculations, the cause of this difference is traced to the out‐of‐plane tilting of the Pb‐halide octahedra provoked by the asymmetric ligand in DMPDPbI₄. Parallel channels of nearly straight Pb? I? Pb bonds are formed in one direction, leading to enhanced electronic coupling and higher band dispersion in that direction. In BDAPbI₄, no such channels exist, resulting in greater electronic confinement and a larger bandgap and exciton binding energy.     

Making by Grinding: Mechanochemistry Boosts the Development of Halide Perovskites and Other Multinary Metal Halides

Mechanochemical synthesis has recently emerged as a promising route for the synthesis of functional lead halide perovskites as well as other (lead‐free) metal halides. Mechanochemical synthesis presents several advantages with regards to more commonly used solution‐based processes such as an inherent lower toxicity by avoiding organic solvents and a finer control over stoichiometry of the final products. The ease of implementation, either through the use of a simple mortar and pestle or with an electrically powered ball‐mill, and low amount of side products make mechanochemical synthesis appealing for upscaling the production of halide perovskites. Due to the defect tolerance of lead halide perovskites, they are ideally suited to be prepared by this solvent‐free method. However, the implementation of these semiconductors in high‐efficiency optoelectronic devices requires the transformation of synthesized powder into smooth thin films where still some hurdles remain to be cleared.     

Organic Gelators as Growth Control Agents for Stable and Reproducible Hybrid Perovskite‐Based Solar Cells

Low‐molecular‐weight organic gelators are widely used to influence the solidification of polymers, with applications ranging from packaging items, food containers to organic electronic devices, including organic photovoltaics. Here, this concept is extended to hybrid halide perovskite‐based materials. In situ time‐resolved grazing incidence wide‐angle X‐ray scattering measurements performed during spin coating reveal that organic gelators beneficially influence the nucleation and growth of the perovskite precursor phase. This can be exploited for the fabrication of planar n‐i‐p heterojunction devices with MAPbI₃ (MA = CH₃NH₃⁺) that display a performance that not only is enhanced by ≈ 25% compared to solar cells where the active layer is produced without the use of a gelator but that also features a higher stability to moisture and a reduced hysteresis. Most importantly, the presented approach is straightforward and simple, and it provides a general method to render the film formation of hybrid perovskites more reliable and robust, analogous to the control that is afforded by these additives in the processing of commodity “plastics.”     

Lewis‐Adduct Mediated Grain‐Boundary Functionalization for Efficient Ideal‐Bandgap Perovskite Solar Cells with Superior Stability

State‐of‐the‐art perovskite solar cells (PSCs) have bandgaps that are invariably larger than 1.45 eV, which limits their theoretically attainable power conversion efficiency. The emergent mixed‐(Pb, Sn) perovskites with bandgaps of 1.2–1.3 eV are ideal for single‐junction solar cells according to the Shockley–Queisser limit, and they have the potential to deliver higher efficiency. Nevertheless, the high chemical activity of Sn(II) in these perovskites makes it extremely challenging to control their physical properties and chemical stability, thereby leading to PSCs with relatively low PCE and stability. In this work, the authors employ the Lewis‐adduct SnF₂·3FACl additive in the solution‐processing of ideal‐bandgap halide perovskites (IBHPs), and prepare uniform large‐grain perovskite thin films containing continuously functionalized grain boundaries with the stable SnF₂ phase. Such Sn(II)‐rich grain‐boundary networks significantly enhance the physical properties and chemical stability of the IBHP thin films. Based on this approach, PSCs with an ideal bandgap of 1.3 eV are fabricated with a promising efficiency of 15.8%, as well as enhanced stability. The concept of Lewis‐adduct‐mediated grain‐boundary functionalization in IBHPs presented here points to a new chemical route for approaching the Shockley–Queisser limit in future stable PSCs.