Construction of a comprehensive PCR-based marker linkage map and QTL mapping for fiber quality traits in upland cotton (Gossypium hirsutum L.)

To facilitate marker assisted selection, there is an urgent need to construct a saturated genetic map of upland cotton (Gossypium hirsutum L.). Four types of markers including SSR, SRAP, morphological marker, and intron targeted intron–exon splice junction (IT-ISJ) marker were used to construct a linkage map with 270 F_2:7 recombinant inbred lines derived from an upland cotton cross (T586 × Yumian 1). A total of 7,508 SSR, 740 IT-ISJ and 384 SRAP primer pairs/combinations were used to screen for polymorphism between the two mapping parents, and the average polymorphisms of three types of molecular markers represented 6.8, 6.6 and 7.0%, respectively. The polymorphic primer pairs/combinations and morphological markers were used to genotype 270 recombinant inbred lines, and a map including 604 loci (509 SSR, 58 IT-ISJ, 29 SRAP and 8 morphological loci) and 60 linkage groups was constructed. The map spanned 3,140.9 cM with an average interval of 5.2 cM between two markers, approximately accounting for 70.6% of the cotton genome. Fifty-four of 60 linkage groups were ordered into 26 chromosomes. Multiple QTL mapping was used to identify QTL for fiber quality traits in five environments, and thirteen QTL were detected. These QTL included four for fiber length (FL), two for fiber strength (FS), two for fiber fineness (FF), three for fiber length uniformity (FU), and two for fiber elongation (FE), respectively. Each QTL explained between 7.4 and 43.1% of phenotypic variance. Five out of thirteen QTL (FL1 and FU1 on chromosome 6, FL2, FU2 and FF1 on chromosome7) were detected in five environments, and they explained more than 20% of the phenotypic variance. Eleven QTL were distributed on A genome, while the other two on D genome.     

Genetic mapping and quantitative trait locus analysis of fiber quality traits using a three-parent composite population in upland cotton (Gossypium hirsutum L.)

Composite cross populations (CP) developed from three or more cultivars/lines are frequently used to improve agronomic and economic traits in crop cultivar development programs. Employing CP in linkage map construction and quantitative trait locus (QTL) mapping may increase the marker density of upland cotton (Gossypium hirsutum L.) genetic maps, exploit more adequate gene resources and facilitate marker-assisted selection (MAS). To construct a relatively high-density map and identify QTL associated with fiber quality traits in upland cotton, three elite upland cultivars/lines, Yumian 1, CRI 35 and 7,235, were used to obtain the segregating population, Yumian 1/CRI 35//Yumian 1/7,235. A genetic map containing 978 simple sequence repeat (SSR) loci and 69 linkage groups was constructed; the map spanned 4,184.4 cM, covering approximately 94.1% of the entire tetraploid cotton genome. A total of 63 QTL were detected, explaining 8.1–55.8% of the total phenotypic variance: 11 QTL for fiber elongation, 16 QTL for fiber length, 9 QTL for fiber micronaire reading, 10 QTL for fiber strength and 17 QTL for fiber length uniformity. The genetic map and QTL detected for fiber quality traits are promising for further breeding programs of upland cotton with improved fiber quality.     

Quantitative trait loci mapping and genetic dissection for lint percentage in upland cotton (Gossypium hirsutum)

Lint percentage is an important character of cotton yield components and it is also correlated with cotton fibre development. In this study, we used a high lint percentage variety, Baimian1, and a low lint percentage, TM-1 genetic standard for Gossypium hirsutum, as parents to construct a mapping populations in upland cotton (G. hirsutum). A quantitative trait locus/loci (QTL) analysis of lint percentage was performed by using two mapping procedures; composite interval mapping (CIM), inclusive composite interval mapping (ICIM) and the F_2:3 populations in 2 years. Six main-effect QTL (M-QTL) for lint percentage (four significant and two suggestive) were detected in both years by CIM, and were located on chr. 3, chr. 19, chr. 26 and chr. 5/chr. 19. Of the six QTL, marker intervals and favourable gene sources of the significant M-QTL, qLP-3(2010) and qLP-3(2011) were consistent. These QTL were also detected by ICIM, and therefore, should preferentially be used for marker-assisted selection (MAS) of lint percentage. Another M-QTL, qLP-19(2010), was detected by two mapping procedures, and it could also be a candidate for MAS. We detected the interaction between two M-QTL and environment, and 11 epistatic QTL (E-QTL) and their interaction with environment by using ICIM. The study also found two EST-SSRs, NAU1187 and NAU1255, linked to M-QTL for lint percentage that could be candidate markers affecting cotton fibre development.     

Indirect somatic embryogenesis and plant recovery from cotton (Gossypium hirsutum L.)

Summary We describe a tissue culture procedure for somatic embryogenesis and plantlet regeneration in cotton (Gossypium hirsutum L. cv. Coker 312). Callused explants or individual globular embryos were transferred to basal media to induce somatic embryogenesis. To determine characteristic early indicators of successful germination and conversion, we identified six types of embryos that developed on basal media. Two of the six embryo types, designated as tulip-shaped and trumpet-shaped, could undergo conversion in preliminary tests, whereas the others had little or no developmental potential. Several media treatments designed to enhance the maturation of globular somatic embryos failed to increase the fraction of embryos which matured to form recoverable types. In efforts to improve plantlet recovery, tulip-shaped embryos were used in limited trials to contrast the effects of chemical and physical desiccation treatments on germination and conversion. The selective use of tulip-shaped somatic embryos, coupled with partial desiccation, seems to have augmented plant recovery. Growth habit, flowering, seed set, and lint production of most of the regenerated plants were comparable to seed-derived plants grown under the same conditions. Partial research support was provided by state and federal funds appropriated to the Ohio Agricultural Research and Development Center, The Ohio State University.     

Characterization of somatic embryogenesis and plant regeneration in cotton (Gossypium hirsutum L.)

Summary Seventeen cultivars of cotton (Gossypium hirsutum L.) were evaluated for callus initiation and maintenance using 3 initiation media and 3 maintenance media. After a series of transfers of a 3% glucose media, calli were placed on a 3% sucrose medium. After several weeks calli were observed for the presence of embryo-like structures. Cultivars Coker 201 and Coker 315 were identified as embryogenic. Embryogenic callus has since been routinely obtained within 6 weeks by initiating callus on glucose media for 3–4 weeks followed by transfer to sucrose media. Histological examination has shown that embryos are derived from isodiametric, densely cytoplasmic cells and follow predictable patterns of development. Upon maturity, transfer to auxin-free media with reduced sucrose levels results in embryo germination. Regenerated plants can be transferred to greenhouse within 90 days of callus initiation.The senior author is presently a Research Geneticist, USDA-ARS, and Assistant Professor Present address     

Plant regeneration via somatic embryogenesis in many cultivars of cotton (Gossypium hirsutum L.)

Summary Embryogenic callus was formed from several cultivars of cotton (Gossypium hirsutum L.) when sections of hypocotyl and cotyledon were cultured on medium supplemented with 5 mg/liter 6-(γ, γ-dimethylallyl-amino)-purine (2iP) and 0.1 mg/liter α-naphthaleneacetic acid (NAA) for callus initiation and proliferation, and subcultured on medium supplemented with 5 mg/liter NAA and 0.1 to 1 mg/liter 2iP for embryogenic callus induction. It seems that a high 2iP:auxin ratio is preferred for callus initiation and proliferation, but should be exchanged with a higher NAA:cytokinin ratio before differentiation will occur. Embryogenic calluses were recovered at a frequency of 2 to 85% depending on the cultivar used. Coker cultivars produced embryogenic callus faster and at higher frequencies than other cultivars. Embryogenic callus produced somatic embryos on phytohormone-free medium. This medium was used to maintain and proliferate embryogenic callus for a perid of 18 to 24 mo. Somatic embryos were converted to plants on a lower ionic strength medium supplemented with 0.1 mg/liter gibberellic acid (GA₃) and 0.01 mg/liter NAA. Glucose was the only carbohydrate used through all phases of tissue culture and was much better than sucrose, on which phenolic production was very high. High temperature (30° C) and low light intensity (9 μE · m⁻² · s⁻¹) were optimal conditions for callus initiation, embryogenic callus induction, and maintenance, whereas lower temperature (25° C) and high light intensity (90 μE · m⁻² s⁻¹) were the optimal conditions for somatic embryo maturation, germination, and plantlet development. Plants could be regenerated within 10 to 12 wk in Cokers or 7 to 8 mo. in others.     

Correlation between chiasma frequency and quantitative traits in upland cotton (Gossypium hirsutum L.)

Summary Four locally adapted and high yielding cultivars of upland cotton were examined in order to elucidate the relationship between total chiasma frequency and quantitative traits, including yield and fiber properties. Total chiasma frequency per nucleus was found to correlate positively with boll number (r = 0.4041), seed cotton yield (r = 0.6003), seed index (r = 0.4624), lint yield (r = 0.7325), and lint index (r = 0.9534). The data are discussed from the point of view that the heterozygosity caused by increased chiasma frequency in inbreeding cotton cultivars is an important compensating mechanism for enhancing effective recombination and genetic variability.     

Gene effects for fibre properties in upland cotton (Gossypium hirsutum L.)

Summary Six populations — P₁,P₂,F₁,F₂,B₁ and B₂ — each of five Upland Cotton (Gossypium hirsutum L.) crosses were used to evaluate gene effects in the inheritance of fibre properties by Gamble's six-parameter model for the analysis of generation means. Partial dominance of long fibres over short fibres and of mature fibres over immature fibres was found in the material studied. Overdominance in gene action governed fibre fineness while additive gene action governed the fibre strength. Besides additive and dominance effects, significant epistasis was present in all crosses. These results indicate a significant potential for improving fibre properties through reciprocal recurrent selection.     

A study of heterosis in upland cotton (Gossypium hirsutum L.)

Summary Heterosis (over mid parent) and useful heterosis (over commercial variety H14) estimates were obtained from a line x tester analysis of crosses involving thirteen diverse female parents with two locally adapted varieties H14 (local standard) and J34. Marked heterosis was observed for seed cotton yield, boll number and halo length. The values of positive heterosis and useful heterosis for seed cotton yield ranged from 28.1 to 87.0% and 20.1 to 45.5%, respectively. The overall study of heterosis revealed that female parents PRS-72 (USSR), 5904F (USSR) and MCU-5 (Madras Cambodian Uganda Selection, Coimbatore) were among the top three females, showing considerable heterosis in crosses with H14 and J34 for seed cotton yield and fibre properties. The practical difficulties in exploiting the phenomenon of heterosis and possible experimental approaches in upland cotton are discussed.     

Somatic embryogenesis and plant regeneration in cotton (Gossypium hirsutum L.)

Tissue culture methods for improvement of cotton has lagged seriously compared to other major crops. A method for regeneration of cotton which includes a morphogenetically competent cell suspension was needed to facilitate selection of stress-resistant variants and gene manipulation. Preliminary screening of eight strains of Gossypium hirsutum L. for embryogenic potential resulted in the production of somatic embryos in all strains. Coker 312 was selected for use in the development of a model regeneration system for G. hirsutum. Calli were initiated from hypocotyl tissues of 3-day-old-seedlings. Globular embryos were present after six weeks in culture. Calli were subcultured to liquid suspension in growth regulator-free medium. After three to four weeks, suspensions were sieved to collect globular and heart stage embryos. Collected embryos developed further when plated onto semi-solid medium. To induce germination and plantlet growth, mature embryos were placed on sterile vermiculite saturated with medium. Upon development of roots and two true leaves, plantlets were potted in peat and sand, and hardened. Mature plants and progeny have been obtained with this procedure. A high percentage of infertile plants was observed among the regenerants.Abbreviations NAA 1 naphthaleneacetic acid - IAA indole-3-acetic acid - 2,4-D 2,4-dichlorophenoxyacetic acid - GA₃ gibberellic acid - MS Murashige and Skoog - BA 6 benzylamino purine - 2i P N⁶-(²-isopentenyladenine     

Identification of quantitative trait loci controlling heading date in rice using a high-density linkage map

 Quantitative trait locus (QTL) analysis has been carried out to identify genes conferring heading date in rice. One hundred and eighty six F₂ plants derived from a cross between a japonica variety, Nipponbare, and an indica variety, Kasalath, were used as a segregating population for QTL mapping and more than 850 markers were employed to identify QTLs. Scan-analysis revealed the existence of two QTLs with large effects, Hd-1 and Hd-2, one in the middle of chromosome 6 and one at the end of chromosome 7, respectively. For both loci, the Kasalath alleles reduced days-to-heading. In addition, three QTLs with minor effects, Hd-3, Hd-4 and Hd-5, were found to be located on chromosomes 6, 7 and 8 based on a secondary scan analysis which was carried out by removing the phenotypic effects of Hd-1 and Hd-2. For the three secondary loci, the Nipponbare alleles reduced days-to-heading. The five QTLs explained 84% of the total phenotypic variation in the F₂ population based on a multiple-QTL model. The presence of a digenic interaction between Hd-1 and Hd-2 was clearly suggested. Received: 18 March 1997 / Accepted: 24 June 1997     

Identification of a third fuzzless seed locus in upland cotton (Gossypium hirsutum L.)

Segregating populations were developed to evaluate the inheritance of the fuzzless seed phenotypes in upland cotton (Gossypium hirsutum L.). Accession 143 of the Mississippi Obsolete Variety Collection (MOVC) has a fuzzless seed phenotype. This line carries the n(2) locus which is recessive to the seed fuzz phenotype. Data from the F(2), BC(1)F(1), F(2:3), and BC(1)F(2) populations of DP 5690 x 143 fit a two-loci model for expression of the recessive fuzzless seed phenotype. Fuzzless seeds were obtained in n(2)n(2) plants when a second recessive locus (n(3)) was present. The dominant N(3) allele found in DP 5690 confers the fuzzy seed phenotype in homozygous n(2) plants. Accession 243 of the MOVC carries the N(1) locus, which is dominant to the presence of seed coat fuzz. No variation from expected ratios was observed in the F(2), BC(1)F(1), F(2:3), and BC(1)F(2) populations of the DP 5690 x 243 cross. The N(3) allele had no apparent effect on the expression of the N(1) locus. In a cross between accessions 243 x 143, a few plants were observed which were completely devoid of lint and fuzz fiber (fiberless). A fiberless line was developed from one of these fiberless plants. This line was designated MD 17 fiberless. In a cross between DP 5690 x MD 17 fiberless, we demonstrated that at least three loci were involved in the expression of the fiberless phenotype. The involvement of n(2) and n(3) in the expression of this fiberless phenotype was demonstrated in the F(2) progeny of the cross between 143 x MD 17 fiberless. This is the first demonstration that N(1), n(2), and n(3) interacted to produce fiberless seed.     

Quantitative trait loci analysis of fiber quality traits using a random-mated recombinant inbred population in Upland cotton (Gossypium hirsutum L.)

Background

Upland cotton (Gossypium hirsutum L.) accounts for about 95% of world cotton production. Improving Upland cotton cultivars has been the focus of world-wide cotton breeding programs. Negative correlation between yield and fiber quality is an obstacle for cotton improvement. Random-mating provides a potential methodology to break this correlation. The suite of fiber quality traits that affect the yarn quality includes the length, strength, maturity, fineness, elongation, uniformity and color. Identification of stable fiber quantitative trait loci (QTL) in Upland cotton is essential in order to improve cotton cultivars with superior quality using marker-assisted selection (MAS) strategy.

Results

Using 11 diverse Upland cotton cultivars as parents, a random-mated recombinant inbred (RI) population consisting of 550 RI lines was developed after 6 cycles of random-mating and 6 generations of self-pollination. The 550 RILs were planted in triplicates for two years in Mississippi State, MS, USA to obtain fiber quality data. After screening 15538 simple sequence repeat (SSR) markers, 2132 were polymorphic among the 11 parents. One thousand five hundred eighty-two markers covering 83% of cotton genome were used to genotype 275 RILs (Set 1). The marker-trait associations were analyzed using the software program TASSEL. At p < 0.01, 131 fiber QTLs and 37 QTL clusters were identified. These QTLs were responsible for the combined phenotypic variance ranging from 62.3% for short fiber content to 82.8% for elongation. The other 275 RILs (Set 2) were analyzed using a subset of 270 SSR markers, and the QTLs were confirmed. Two major QTL clusters were observed on chromosomes 7 and 16. Comparison of these 131 QTLs with the previously published QTLs indicated that 77 were identified before, and 54 appeared novel.

Conclusions

The 11 parents used in this study represent a diverse genetic pool of the US cultivated cotton, and 10 of them were elite commercial cultivars. The fiber QTLs, especially QTL clusters reported herein can be readily implemented in a cotton breeding program to improve fiber quality via MAS strategy. The consensus QTL regions warrant further investigation to better understand the genetics and molecular mechanisms underlying fiber development.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-397) contains supplementary material, which is available to authorized users.     

Wide-cross whole-genome radiation hybrid mapping of cotton (Gossypium hirsutum L.)

We report the development and characterization of a "wide-cross whole-genome radiation hybrid" (WWRH) panel from cotton (Gossypium hirsutum L.). Chromosomes were segmented by gamma-irradiation of G. hirsutum (n = 26) pollen, and segmented chromosomes were rescued after in vivo fertilization of G. barbadense egg cells (n = 26). A 5-krad gamma-ray WWRH mapping panel (N = 93) was constructed and genotyped at 102 SSR loci. SSR marker retention frequencies were higher than those for animal systems and marker retention patterns were informative. Using the program RHMAP, 52 of 102 SSR markers were mapped into 16 syntenic groups. Linkage group 9 (LG 9) SSR markers BNL0625 and BNL2805 had been colocalized by linkage analysis, but their order was resolved by differential retention among WWRH plants. Two linkage groups, LG 13 and LG 9, were combined into one syntenic group, and the chromosome 1 linkage group marker BNL4053 was reassigned to chromosome 9. Analyses of cytogenetic stocks supported synteny of LG 9 and LG 13 and localized them to the short arm of chromosome 17. They also supported reassignment of marker BNL4053 to the long arm of chromosome 9. A WWRH map of the syntenic group composed of linkage groups 9 and 13 was constructed by maximum-likelihood analysis under the general retention model. The results demonstrate not only the feasibility of WWRH panel construction and mapping, but also complementarity to traditional linkage mapping and cytogenetic methods.     

Proteomics profiling of fiber development and domestication in upland cotton (Gossypium hirsutum L.)

Comparative proteomic analyses were performed to detail the evolutionary consequences of strong directional selection for enhanced fiber traits in modern upland cotton (Gossypium hirsutum L.). Using two complementary proteomic approaches, 2-DE and iTRAQ LC–MS/MS, fiber proteomes were examined for four representative stages of fiber development. Approximately 1,000 protein features were characterized using each strategy, collectively resulting in the identification and functional categorization of 1,223 proteins. Unequal contributions of homoeologous proteins were detected for over a third of the fiber proteome, but overall expression was balanced with respect to the genome-of-origin in the allopolyploid G. hirsutum. About 30 % of the proteins were differentially expressed during fiber development within wild and domesticated cotton. Notably, domestication was accompanied by a doubling of protein developmental dynamics for the period between 10 and 20 days following pollination. Expression levels of 240 iTRAQ proteins and 293 2-DE spots were altered by domestication, collectively representing multiple cellular and metabolic processes, including metabolism, energy, protein synthesis and destination, defense and stress response. Analyses of homoeolog-specific expression indicate that duplicated gene products in cotton fibers can be differently regulated in response to selection. These results demonstrate the power of proteomics for the analysis of crop domestication and phenotypic evolution.     

Correlation studies on yield and fibre traits in upland cotton (Gossypium hirsutum L.)

Summary Two diverse parents of upland cotton namely J.34 and I.C. 1926 were crossed. A comparison between biparental intermated progenies and F₃ families indicated alteration of correlation coefficient between yield and halo length. The significant negative correlation in F₃ population between these two attributes changed to a positive but non significant one in biparental intermated progenies. A change in correlation coefficients was expected due to breakage of linkage upon intermating. An increase in the correlation coefficients could also be expected when linkages are predominantly in the repulsion phase. It is suggested that intermating in early generations coupled with selection of desirable segregants may prove a useful method for improving yield and quality simultaneously. The diallel selective mating system may also supplement intermating to improve yield and quality in cotton.Part of Ph.D. Thesis submitted to the Haryana Agricultural University. Hissar-125004, India     

Genetic analysis of some seed quality characters in upland cotton (Gossypium hirsutum L.)

Summary A set of diallel crosses involving ten parents was evaluated over two locations to determine the genetic control of protein per cent, oil per cent, seed index, percentage of mature seeds and number of seeds per boll. The analysis of pooled data showed that percentage of mature seeds was controlled by additive (D) and non-additive (H₁ and H₂) genetic effects. Overdominance was noticed. For seed index the D component measuring additive, and the H₂ component measuring dominance, variation were significant. Protein content and oil content were primarily under the control of non-additive (H₁ and H₂) genetic effects, while for number of seeds per boll the variability was accounted for by dominance (H₁) effects only. The development of pure lines through appropriate methods is suggested.Part of the thesis of the senior author, submitted in partial fulfilment for the Ph.D. degree