Enhanced firefly bioluminescence assay of ATP in the presence of ATP extractants by using diethylaminoethyl-dextran

A highly sensitive ATP bioluminescence assay with diethylaminoethyl-dextran (DEAE-Dx) in the presence of ATP extractants such as trichloroacetic acid (TCA) and Triton X-100 is described. These ATP extractants inhibited the activity of firefly luciferase, resulting in a remarkable decrease in the intensity of light emission. However, DEAE-Dx enhanced the intensity of light emission as long as firefly luciferase was active in the presence of the ATP extractants. When DEAE-Dx was used for the assay, the detection limits for ATP in the presence of TCA and Triton X-100 were 0.3 and 0.5 pM, respectively, in aqueous ATP standard solution. The detection limit in the presence of DEAE-Dx was improved 13- to 20-fold compared to that in the absence of DEAE-Dx. The method was applied to the determination of ATP in Escherichia coli extracts. When a 5% solution of TCA was used for the extraction of ATP from E. coli cells, the detection limit corresponded to 250 cells ml(-1) of E. coli.     

ATP生物发光测定试剂研究进展

萤火虫荧光素酶是ATP生物发光试剂的关键组成部分,可通过萤火虫尾提取纯化或基因工程技术制备,酶的活力和纯度决定了ATP生物发光试剂的性能。迄今许多先进技术在ATP生物发光试剂的制备中均有应用,包括酶基因工程改造技术、ATP循环的酶法放大技术、荧光素酶蛋白的活力及发光稳定技术,特异的细胞ATP提取技术等。ATP生物发光试剂的研究焦点主要集中在提高发光试剂的检测灵敏度和性能、增加产品的适应性等方面。     

Assay of ATP in intact cells of the facultative phototroph Rhodobacter capsulatus expressing recombinant firefly luciferase

This study reports on the construction, calibration and use of recombinant cells of Rhodobacter capsulatus expressing the luciferase gene of the North American firefly Photinus pyralis to detect, by bioluminescence, variations of endogenous ATP levels under various physiological conditions. We show that the antibiotic polymyxin B allows luciferin to rapidly move into cell cytosol, but does not make external ATP freely accessible to intracellular luciferase. Notably, in toluene:ethanol-permeabilized cells, the apparent K(mATP) for luciferase (50 microM) is similar to that measured in soluble cell fractions. This finding limits the applicability of the firefly luciferase for monitoring intracellular maximal ATP concentration because dark/aerobic-grown recombinant cells of Rba. capsulatus contain approximately 1.3-2.6+/-0.5 mM ATP. Therefore, the effects of chemical and physical factors such as oxygen, light, carbonyl cyanide m-chlorophenyl hydrazone and antimycin A on ATP synthesis were examined in cells subjected to different starvation periods to reduce the endogenous ATP pool below the luciferase ATP saturation level (< or =0.2 mM). We conclude that the amount of endogenous ATP generated by light is maximal in the presence of oxygen, which is required to optimize the membrane redox poise.     

Enumeration of bacterial cell numbers by amplified firefly bioluminescence without cultivation

We recently developed a novel bioluminescent enzymatic cycling assay for ATP and AMP with the concomitant use of firefly luciferase and pyruvate orthophosphate dikinase (PPDK), where AMP and pyrophosphate produced from ATP by firefly luciferase were converted back into ATP by PPDK. Background luminescence derived from contaminating ATP and AMP in the reagent was reduced using adenosine phosphate deaminase which degrades ATP, ADP, and AMP, resulting in constant and highly amplified bioluminescence with low background luminescence. To detect bacterial cells without cultivation, we applied the above bioluminescent enzymatic cycling reagent to rapid microbe detection system. ATP spots (0.31-5.0 amol/spot) at the level of a single bacterial cell were detected with 5 min signal integration, signifying that integrated luminescence was amplified 43 times in comparison to traditional ATP bioluminescence. Consequently, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Lactobacillus brevis in beer were detected without cultivation. Significant correlation was observed between the number of signal spots obtained using this novel system and the colony-forming units observed with the conventional colony-counting method (R(2)=0.973).     

ATP amplification for ultrasensitive bioluminescence assay: detection of a single bacterial cell

We developed an ultrasensitive bioluminescence assay of ATP by employing (i) adenylate kinase (ADK) for converting AMP + ATP to two molecules of ADP, (ii) polyphosphate (polyP) kinase (PPK) for converting ADP back to ATP (ATP amplification), and (iii) a commercially available firefly luciferase. A highly purified PPK-ADK fusion protein efficiently amplified ATP, resulting in high levels of bioluminescence in the firefly luciferase reaction. The present method, which was approximately 10,000-fold more sensitive to ATP than the conventional bioluminescence assay, allowed us to detect bacterial contamination as low as one colony-forming unit (CFU) of Escherichia coli per assay.     

Bioluminescence determination of enzyme activity of firefly luciferase in the presence of pesticides.

Firefly luciferase (EC 1.13.12.5) (FL) is the key enzyme in the firefly bioluminescence method (FB), which is widely used to determine the viability of living cells. The FB method can also be applied to monitoring the influence of different pollutants, such as pesticides. Firefly luciferase is a hydrophobic enzyme and its activity depends on the type of solvent, pH and substances present in the reaction mixture. The influence of three aromatic pesticides, including fenoxaprop-p-ethyl (I), diclofop-methyl (II) and metsulfuron methyl (III), on the enzyme activity was indirectly evaluated through the measurement of emitted light in the bioluminescence reaction, expressed in relative luminescence units (RLU). The reaction mixture used in the bioluminescence measurements consisted of: Tris buffer (pH 7.75), adenosine triphosphate (ATP) and ATP monitoring reagent, where FL is present. Ethanol-water solutions of each pesticide were then added at concentrations of 2.4 x 10(-4)-2.4 x 10(-8) mol/L. The FL activity inhibition factors (FL In%) were determined. The FL activity was maximally inhibited in the presence of all pesticides under study at a concentration of 2.4 x 10(-4) mol/L and was lowered by about 15-26% for pesticide I at concentrations of 2.4 x 10(-5)-2.4 x 10(-8) mol/L, whereas pesticides II and III, applied in the same concentration range, showed smaller FL inhibition values (5.3-20%). The pesticide degradation products (obtained after a 1 month period), measured in the same experimental conditions, in most cases exhibited a much less inhibitory effect on the enzyme activity than the corresponding initial pesticide.     

Continous monitoring of ATP-converting reactions by purified firefly luciferase.

The time course of the bioluminescence obtained with a partially purified firefly luciferase preparation has been studied. At ATP levels less than 10^?6m the light emission could be maintained essentially constant for several minutes, if the luciferase was not subjected to product inhibition or other inactivating processes. This could be achieved by performing the reaction at appropriate pH and concentration of luciferin and luciferase. Under these conditions continuous measurement of light emission may be used for nondestructive monitoring of ATP-converting reactions, since the emission will be proportional to the ATP concentration in each instant. The continuous monitoring of ATP concentration by firefly luciferase was used for kinetic determination of enzymes and metabolites and for endpoint analysis of metabolites. It was found to be extremely sensitive and convenlent for routine applications.     

Determination of sterilization effectiveness by measuring bacterial growth in a biological indicator through firefly luciferase determination of ATP

A bioluminescence procedure for measurement of microbial ATP allows a rapid determination of the effectiveness of autoclave sterilization. This determination is achieved faster than detection of acid production in a biological indicator via a pH indicator. Bacterial outgrowth from spores on test strips of the biological indicator was detected by measurement of ATP using the firefly luciferase reaction. A measureable increase in ATP was found after 5 hours of incubation of a biological indicator that had been treated under sterilizing conditions that produced 75% sterility of the biological indicator as measured by acid production. This is a marked improvement over the 24-48 hours of incubation currently required.     

The influence of hypoxia on bioluminescence in luciferase-transfected gliosarcoma tumor cells in vitro

Firefly luciferase catalyzes the emission of light from luciferin in the presence of oxygen and adenosine triphosphate. This bioluminescence is commonly employed in imaging mode to monitor tumor growth and treatment responses in vivo. A potential concern is that, since solid tumors are often hypoxic, either constitutively and/or as a result of treatment, the oxygen available for the bioluminescence reaction could be reduced to limiting levels, leading to underestimation of the actual number of luciferase-labeled cells during in vivo experiments. We present studies of the oxygen dependence of bioluminescence in vitro in rat 9 L gliosarcoma cells tagged with the firefly luciferase gene (9L(luc)). We demonstrate that the bioluminescence signal decreases at pO(2) 相似文献   

Application of a bioluminescence ATP assay in brewery wastewater treatment studies

The importance of having a rapid method for determining the viable biomass in activated-sludge wastewater treatment plants (WWTP) for process control and development is well recognized. The firefly bioluminescence ATP assay has been proposed for this purpose. Such an assay using partially purified firefly luciferase and synthetic firefly luciferin for the bioluminescence reaction, a liquid scintillation counter in the out-of-coincidence mode as luminescence detector, and a sludge ATP extraction technique involving dimethyl sulfoxide at room temperature is described. Experiments with several pure bacteria cultures were done to demonstrate the feasibility of applying this assay to activated sludge to activated sludge WWTP investigation and control. The ATP content of samples taken from various points in a 350000 gal/day brewery activated-sludge WWTP was monitored for 4.5 months. Good linear correlation between ATP and mixed-liquor suspended solids, return sludge suspended solids, and effluent suspended solids were observed. Percentage viabilities of the various sludge samples were derived from the ATP results.     

On-line monitoring of intracellular ATP concentration in Escherichia coli fermentations

A method was developed to provide a real-time measurement of intracellular adenosine 5'-triphosophate (ATP) concentrations in growing Escherichia coli. The bacteria to be monitored must first be modified by inserting the cDNA for firefly luciferase expressed from a constitutive promoter. Such a construct leads to constant specific activity of firefly luciferase during both the lag phase and exponential growth. When the luciferase substrate, D-luciferin, is added to the medium, ATP within the cells is utilized in the luciferase-catalyzed reaction that produces light. The light is carried from the bioreactor to a computer-based detector by an optical fiber. The detected per cell light emission varies during exponential growth. Analysis of cytoplasm extracts shows that this variance is related to changes in the ATP concentration, which ranges from 1 to 6 times the literature value for K(M). Experimental analyses demonstrated that inner filter effects are not a significant factor affecting the use of this system. The method was tested in a benchtop fermentor at cell densities above 13 g/L dry cell weight. A correction factor based on the accumulated light data is calculated and used in real time to account for consumption of luciferin from the culture broth by the light producing reaction. Dissolved oxygen concentrations must be kept above 15% of air saturation to ensure constant light output, but no detectable increase in oxygen demand is seen. The method does not significantly affect growth or production rates. (c) 1996 John Wiley & Sons, Inc.     

Homogeneous bioluminescence assay for galactosuria: interference and kinetic analysis

Elevated galactose concentration in urine is an important clinical symptom of galactosemia and other metabolic disorders. A quantitative assay for galactose using firefly luciferase bioluminescence is presented. The assay couples the galactokinase and firefly luciferase reactions. A higher concentration of galactose present in the sample produces a faster decrease in ATP concentration, which is monitored by firefly luciferase bioluminescence. The kinetic assay is modeled and analyzed. The interference between the two reactions, the interference of certain sugars and other components in the urine, the specificity, and the optimal pH for galactokinase were studied. Calibration curves were constructed and compared with a conventional spectrophotometric assay for galactose. The bioluminescence assay is relatively fast and specific for galactose with a linear range from 1 to 20 mM galactose. The effect of other galactose metabolites (galactonate and galactitol) has also been studied.     

Two kinetically distinguishable ATP sites in firefly luciferase

Results are presented which indicate that firefly luciferase has two catalytically active sites. One site, Km of 1.1 X 10(-4) M ATP, is responsible for the initial flash and is apparently product inhibited for further light production. The second site, Km of 2 X 10(-5) M ATP, catalyzes the continuous low production of light. ATP or AMP is a potent inhibitor of the initial flash when LH2-AMP is used to initiate the light reaction but appears to have no affect on the second site low level light emission. Both sites must be occupied by ATP for the formation of one L-AMP. Thus, ATP appears to function both as a catalytically active substrate and a regulator for light emission.     

Choice of buffer anion for the assay of adenosine 5′-triphosphate using firefly luciferase

Anions inhibit firefly luciferase. We have compared the extent of inhibition of luciferase by the anions from various acids used to adjust Tris buffer solutions to pH 7.75, the optimum pH for enzyme activity. Acetate and succinate were the least inhibitory of the anions tested. Tris-acetate buffers are recommended for maximum sensitivity of ATP assays with firefly luciferase.     

Luminometry and PCR-based monitoring of gene-tagged cyanobacteria in Baltic Sea microcosms

Abstract The cyanobacterium Synechocystis 6803 was tagged by chromosomal integration of the firefly luciferase gene, lue , resulting in the modified strain Synechocystis 6803- luc . The tagged cells were monitored in Baltic Sea microcosms both by detection of the luc gene by PCR amplification and by measurement of luc gene expression (bioluminescence) in total protein extracted from sediment and water. A new method was developed for isolation and concentration of total protein from sediment for optimization of luciferase quantitation. The detection limit for Synechocystis with a chromosomal luc insertion by bioluminescence was in the order of 4 × 10³ cells per g sediment, a considerable improvement in sensitivity over previous methods. Another improvement was to use an internal luciferase standard to correct for quenching of light output by impurities in the samples. Baltic sea microcosms were inoculated with Synechocystis 6803- luc , and the luc DNA and luciferase protein specific to the tagged cells were monitored over time. A decrease in luminescence in the microcosm water was observed, simultaneously with an increase in luminescence in the sediment, suggesting settling of the luc -tagged cells in the sediment layer.     

Firefly luciferase is a bifunctional enzyme: ATP-dependent monooxygenase and a long chain fatty acyl-CoA synthetase

Firefly luciferase can catalyze the formation of fatty acyl-CoA via fatty acyl-adenylate from fatty acid in the presence of ATP, Mg²⁺ and coenzyme A (CoA). A long chain fatty acyl-CoA (C₁₆–C₂₀), produced by luciferase from a North American firefly (Photinus pyralis) and a Japanese firefly (Luciola cruciata), was isolated and identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis. Of a number of substrates tested, linolenic acid (C_18:3) and arachidonic acid (C_20:4) appear to be suitable for acyl-CoA synthesis. This evidence suggests that firefly luciferase within peroxisomes of the cells in the photogenic organ may be a bifunctional enzyme, catalyzing not only the bioluminescence reaction but also the fatty acyl-CoA synthetic reaction.     

The influence of insertion of a critical residue (Arg356) in structure and bioluminescence spectra of firefly luciferase

The firefly bioluminescence reaction, which uses luciferin, Mg-ATP, and molecular oxygen to yield an electronically excited oxyluciferin, is carried out by luciferase and visible light is emitted. The bioluminescence color of firefly luciferases is determined by the luciferase structure and assay conditions. Among different beetle luciferases, those from Phrixothrix railroad worm emit either yellow or red bioluminescence colors. Sequence alignment analysis shows that the red-emitter luciferase from Phrixothrix hirtus has an additional Arg residue at 353, which is absent in firefly luciferases. We report here the construction and purification of a mutant at residue Arg(356), which is not conserved in beetle luciferases. By insertion of an additional residue (Arg(356)) using site-specific insertion mutagenesis in a green-emitter luciferase (Lampyris turkestanicus) the color of emitted light was changed to red and the optimum temperature of activity was also increased. Insertion of this Arg in an important flexible loop showed changes of the bioluminescence color and the luciferase reaction took place with relatively retention of its basic kinetic properties such as Km and relative activity. Comparison of native and mutant luciferases using homology modeling reveals a significant conformational change of the flexible loop in the red mutant. Movement of flexible loop brought about a new ionic interaction concomitant with a change in polarity of the emitter site, thereby leading to red emission. It is worthwhile to note that the increased optimum temperature and emission of red light might make mutant luciferase a suitable reporter for the study of gene expression and bioluminescence imaging.     

An enzymatic cycling method using pyruvate orthophosphate dikinase and firefly luciferase for the simultaneous determination of ATP and AMP (RNA)

A novel bioluminescent enzymatic cycling assay for ATP and AMP with concomitant use of firefly luciferase and pyruvate orthophosphate dikinase (PPDK) was developed. In this system, AMP and pyrophosphate produced from ATP by firefly luciferase were converted back into ATP by PPDK. This resulted in constant luminescence once the stable phase had been reached. Background luminescence of the reagent was reduced with adenosine phosphate deaminase by degrading ATP and AMP in the reagent. The maximum recycling ratio calculated from the integrated luminescence value was 2.64 cycles/min. The measurable ranges for ATP and AMP were equal and were between 4 x 10(-13) and 4 x 10(-17) mol/assay. The amount of yeast RNA could be estimated in the range of 1 x 10(-8) to 1 x 10(-12) g/assay by estimating the amount of AMP resulting from the degradation of RNA with nuclease P1. Various food samples were subjected to measurement of the amount of ATP + AMP + RNA to provide an index for hygiene monitoring. For beef extract, sensitivity was improved by more than 20 million compared to the previous methods relying only on the amount of ATP as an index.     

Method for measuring ATP production in isolated mitochondria: ATP production in brain and liver mitochondria of Fischer-344 rats with age and caloric restriction

The production of ATP is vital for muscle contraction, chemiosmotic homeostasis, and normal cellular function. Many studies have measured ATP content or qualitative changes in ATP production, but few have quantified ATP production in vivo in isolated mitochondria. Because of the importance of understanding the energy capacity of mitochondria in biology, physiology, cellular dysfunction, and ultimately, disease pathologies and normal aging, we modified a commercially available bioluminescent ATP determination assay for quantitatively measuring ATP content and rate of ATP production in isolated mitochondria. The bioluminescence assay is based on the reaction of ATP with recombinant firefly luciferase and its substrate luciferin. The stabilities of the reaction mixture as well as relevant ATP standards were quantified. The luminescent signals of the reaction mixture and a 0.5 microM ATP standard decreased linearly at rates of 2.16 and 1.39% decay/min, respectively. For a 25 microM ATP standard, the luminescent signal underwent a logarithmic decay, due to intrinsic deviations from the Beer-Lambert law. Moreover, to test the functionality of isolated mitochondria, they were incubated with 1 and 5 mM oligomycin, an inhibitor of oxidative phosphorylation. The rate of ATP production in the mitochondria declined by 34 and 83%, respectively. Due to the sensitivity and stability of the assay and methodology, we were able to quantitatively measure in vivo the effects of age and caloric restriction on the ATP content and production in isolated mitochondria from the brain and liver of young and old Fischer-344 rats. In both tissues, neither age nor caloric restriction had any significant effect on the ATP content or the rate of ATP production. This study introduces a highly sensitive, reproducible, and quick methodology for measuring ATP in isolated mitochondria.