Enrichment for microbes living in association with plant tissues

AIMS: To investigate a cultivation-independent method of enrichment for microbes living in association with plant tissues. METHODS AND RESULTS: A large quantity of leaves or seeds was enzymatically hydrolyzed, and the pellets were collected by differential centrifugation. Enzyme concentration, buffer and incubation time were optimized for release of plant-associated microbes. The relative abundance of plant nuclear DNA and bacterial DNA in the enriched sample was estimated by PCR amplification of genome-specific marker genes. The efficiency of microbe enrichment was estimated from the proportion of bacterium-derived clones and their restriction fragment length polymorphism (RFLP) types as detected by 16S rRNA gene-based techniques. With a higher ratio of bacterial to plant nuclear DNA, the enriched samples showed a considerably enhanced proportion of bacterium-derived clones and a wider sequence diversity of those clones. CONCLUSIONS: The method described here proved to be remarkably effective in enriching for bacteria living in association with plant tissues. SIGNIFICANCE AND IMPACT OF THE STUDY: The method can be applied to study plant-associated microbes in the field of environmental molecular ecology and environmental metagenomics.     

Rapid preparation of cyanobacterial DNA for real-time PCR analysis

AIMS: To develop a rapid preparation method for real-time PCR analysis of cyanobacteria from cultures or field samples. METHODS AND RESULTS: Field samples and cultures containing Anabaena circinalis, Cylindrospermopsis raciborskii or Microcystis aeruginosa were subjected to three cell disruption treatments: (i) heating during thermocycling, (ii) microwave irradiation in the presence of detergent and (iii) probe sonication. Treated samples were directly added to the PCR reaction and analysed on two different real-time devices. A statistically significant difference was evident in the cycle thresholds for each of the treatments in all but one culture and one environmental sample, sonication and microwave treatments performing better than direct addition. The microwave treatment was also compared to the Qiagen DNA Mini kit and performance was equivalent when treated samples were analysed as above. CONCLUSIONS: Whilst microwave treatment was slightly less effective than probe sonication across all samples, it was more amenable to processing multiple samples and significantly better than heat treating the sample during thermocycling. SIGNIFICANCE AND IMPACT OF THE STUDY: The microwave method described here is a simple, rapid and effective preparation method for cyanobacterial DNA that can be easily deployed in the field, making the most of the speed and flexibility offered by fixed and portable real-time PCR devices.     

Comparative analysis of environmental DNA extraction and purification methods from different humic acid-rich soils

AIM: To establish a rapid, improved soil environmental DNA extraction and purification protocol. METHODS AND RESULTS: Three different soil DNA isolation and four purification strategies were compared on different soil samples with variable rates of success. Bead beating extraction gave significantly higher DNA yields than microwave-based and liquid nitrogen grinding DNA extraction methods. The inclusion of soil washing prior to cell lysis decreased the amount of purification steps required. Although these soil types differed, polyvinylpolypyrrolidone (PVPP)-sepharose 2B column elution was sufficient for all three samples, yielding DNA pure enough for successful application in molecular studies. One soil sample retained 80% of the initial DNA after successful purification. CONCLUSIONS: Optimization of a purification protocol confirmed that only a combination of previously described methods proved sufficient in yielding pure environmental DNA from humic-rich soils. Total processing time for DNA extraction and subsequent purification from multiple samples was considerably more rapid than the previously described methods. SIGNIFICANCE AND IMPACT OF THE STUDY: This study developed a new optimized soil DNA extraction and purification protocol that is suitable for different environmental sources that are rich in humic acid content.     

An efficient purification and fractionation of genomic DNA from soil by modified troughing method

AIMS: The aim of this study was to utilize a modified troughing method for purification of large genomic DNA obtained from microbiota in natural environment and for fractionation of genomic DNA into many size ranges that facilitates construction of metagenomic library. METHODS AND RESULTS: Genomic DNA extracted from soil or termite gut was purified by the modified troughing method which utilized gel electrophoresis in the presence of 30% PEG8000. The method performed better than various purification kits and allowed no significant loss in the amount of DNA recovered. In addition, the efficiency of the modified troughing method for DNA size fractionation was investigated. DNA size fractionation was achieved with repetitive rounds of electrophoresis and DNA collection to obtain DNA with many size ranges. CONCLUSIONS: The modified troughing method is a simple and efficient method for purification of genomic DNA and for DNA size fractionation. SIGNIFICANCE AND IMPACT OF THE STUDY: The modified troughing method is a straightforward and inexpensive technique readily available for anyone working with environmental genomic DNA. It facilitates cloning of genomic DNA and enhances rapid discovery of useful bioactive compounds from microbial resources.     

Screening and purification for novel cytochrome b5 from uncultured environmental micro-organisms

AIMS: We describe a sequence-based PCR method suitable for the isolation of a novel soluble heme-binding domain of cytochrome b(5) (cyt b(5)) gene directly from metagenomic DNA is described. METHODS AND RESULTS: Using the degenerate primer set, a cyt b(5) gene was isolated directly from metagenomic DNA. Based on the sequence-based PCR method, the similar conserved motif of cyt b(5) from Rhodopseudomonas palustris strain makes the novel target gene. The gene encoding cyt b(5) was cloned and expressed in Escherichia coli BL21 (DE3) using pET expression system. The expressed recombinant enzyme was purified by Ni-nitrilotriacetic acid affinity chromatography and characterized. CONCLUSIONS: Sequence-based strategy is an effective method for application of the novel gene from metagenomic DNA. SIGNIFICANCE AND IMPACT OF THE STUDY: Investigation of novel genes from metagenome, most of the micro-organism species are largely untapped, could represent an interesting and useful reservoir for biological processes.     

Capture probe conjugated to paramagnetic nanoparticles for purification of Alexandrium species (Dinophyceae) DNA from environmental samples

AIMS: To develop a rapid, cost-effective and selective Alexandrium DNA extraction procedure from environmental samples in order to provide good-quality template for the downstream PCR-based detection assay. METHODS AND RESULTS: In this study, we tested a DNA extraction method based on silica-coated, superparamagnetic nanoparticles conjugated to a DNA-capture sequence (probe) complementary to a specific region of 5.8S rDNA of the genus Alexandrium. Cultured Alexandrium catenella cells were used as the harmful algal bloom species for the DNA extraction. Then, a PCR assay was performed with primers specific for the genus Alexandrium to assess the specificity and sensitivity of the nucleic acid extraction method. This method was applied to both cultured and field samples, reaching in both cases a detection limit of one A. catenella cell. CONCLUSIONS: The results suggest that the use of probe-conjugated paramagnetic nanoparticles could be effective for the specific purification of microalgal DNA in cultured or environmental samples, ensuring sensitivity and specificity of the subsequent PCR assays. SIGNIFICANCE AND IMPACT OF THE STUDY: The DNA extraction method optimized in this study represents a progress towards the rapid and efficient direct detection of Alexandrium cells in seawater monitoring. In fact, this method requires no other equipment than a magnet and a hybridization oven and, in principle, can be adapted to different toxic microalgal species and can be automated, allowing the processing of a high number of samples.     

Identification of Fusarium graminearum in cereal samples by DNA Detection Test Strips

AIMS: Development of a fast, sensitive and easy to handle method for the detection of Fusarium graminearum contamination in cereal samples by PCR. METHODS AND RESULTS: DNA Detection Test Strips were used for PCR-product detection and the method was compared to agarose gel electrophoresis. A minimum of 0.26 ng of purified target DNA was detectable with the Test Strip Detection limit in less contaminated samples was slightly lower when gel electrophoresis was used for amplicon detection. In highly contaminated samples, detection limits of both methods were similar. CONCLUSIONS: Detection of PCR products was performed in 20 min without the need of special technical equipment or hazardous fluorescent DNA dyes. SIGNIFICANCE AND IMPACT OF THE STUDY: The new method described is useful for the screening of cereals in industrial quality control.     

Development of a SYBR Green I real-time PCR for quantitative detection of Vibrio alginolyticus in seawater and seafood

AIM: Vibrio alginolyticus is an economically important micro-organism. The main aim of the present study was to develop a real-time polymerase chain reaction (PCR) assay for rapid, sensitive and effective quantification of V. alginolyticus in seawater and seafood. METHODS AND RESULTS: Purified DNA of V. alginolyticus, artificially inoculated seawater and seafood tissue homogenates were subjected to the gyrB-targeted real-time PCR assay. Natural seawater and seafood samples were analysed by this real-time PCR protocol. Specificity tests showed that positive result was obtained only with V. alginolyticus strains. The detection sensitivity was determined to be 0.4 pg of genomic DNA equivalent to 72 cells per PCR in pure culture and 100 cells in 1 ml of seawater or seafood tissue homogenates. Single cell detection is achieved after 3 h of sample enrichment. CONCLUSIONS: A sensitive and specific SYBR Green I-based real-time PCR assay targeting gyrB gene was successfully developed to quantify V. alginolyticus within 6 h in seawater and seafood samples. SIGNIFICANCE AND IMPACT OF THE STUDY: No report on the molecular-based method was available for quantitative detection of V. alginolyticus. This work will provide a novel method for evaluation of the risk of V. alginolyticus to marine environmental health and seafood safety.     

Direct PCR detection of Escherichia coli O157:H7

AIMS: This paper reports a simple, rapid approach for the detection of Shiga toxin (Stx)-producing Escherichia coli (STEC). METHODS AND RESULTS: Direct PCR (DPCR) obviates the need for the recovery of cells from the sample or DNA extraction prior to PCR. Primers specific for Stx-encoding genes stx1 and stx2 were used in DPCR for the detection of E. coli O157:H7 added to environmental water samples and milk. CONCLUSIONS: PCR reactions containing one cell yielded a DPCR product. SIGNIFICANCE AND IMPACT OF THE STUDY: This should provide an improved method to assess contamination of environmental and other samples by STEC and other pathogens.     

DNA extraction method for PCR in mycorrhizal fungi

AIMS: To develop a simple and rapid DNA extraction protocol for PCR in mycorrhizal fungi. METHODS AND RESULTS: The protocol combines the application of rapid freezing and boiling cycles and passage of the extracts through DNA purification columns. PCR amplifiable DNA was obtained from a number of endo- and ecto-mycorrhizal fungi using minute quantities of spores and mycelium, respectively. CONCLUSION: DNA extracted following the method, was used to successfully amplify regions of interest from high as well as low copy number genes. The amplicons were suitable for further downstream applications such as sequencing and PCR-RFLPs. SIGNIFICANCE AND IMPACT OF THE STUDY: The protocol described is simple, short and facilitates rapid isolation of PCR amplifiable genomic DNA from a large number of fungal isolates in a single day. The method requires only minute quantities of starting material and is suitable for mycorrhizal fungi as well as a range of other fungi.     

Extraction and detection of baculoviral DNA from lake water, detritus and forest litter

AIMS: This paper describes a quick, reproducible, sensitive method for baculoviral DNA extraction, purification and detection from freshwater and forest litter environments. METHODS AND RESULTS: The extraction protocol utilizes enzymatic and chemical lysis and physical disruption. To assess the efficiency of the extraction and purification protocol, PCR was used to detect a 530 bp DNA fragment from the genome of a genetically-modified baculovirus, Choristoneura fumiferana NPVegt-/lacZ+. The detection limit of PCR amplification was routinely about 4.1 x 102 occlusion bodies (OBs) 450 microl-1 lake water. Template DNA from the detritus and forest litter samples required 100-fold dilutions before use in PCR reactions. The detection limits for detritus and forest litter samples were routinely about 7.41 x 103 and 2.08 x 104 OBs 0.5 g-1 dry weight, respectively. CONCLUSION: The DNA extraction and purification methodology is reproducible, sensitive and can be used in lieu of, or in conjunction with, insect bioassays. SIGNIFICANCE AND IMPACT OF THE STUDY: The DNA extraction and purification protocol described in this paper will facilitate risk assessment and ecological studies of both wild-type and genetically-modified baculoviruses.     

Correlation between DNA of trichothecene-producing Fusarium species and deoxynivalenol concentrations in wheat-samples

AIMS: Correlations between DNA content of trichothecene-producing Fusarium spp. and concentration of the key mycotoxin deoxynivalenol (DON) in cereal samples. METHODS AND RESULTS: A LightCycler PCR-based assay was used to quantify the DNA from trichothecene-producing Fusarium spp. in 300 wheat samples. DNA concentrations ranged from not detectable to 16.3 mg kg-1 whereas DON concentrations (GC/MS data) varied from not detectable to 34.3 mg kg-1. Data analysis revealed a coefficient of correlation r=0.9557 between DON concentrations and DNA-amounts over all samples. An interval of confidence for P=95% was calculated based on samples with DON concentrations < or = 1.5 mg kg-1 (n=234). CONCLUSIONS: Quantification of 32 samples of Fusarium-contaminated wheat was performed within 45 min. Data analysis allowed estimation of DON contamination from quantitative PCR data in the wheat samples. SIGNIFICANCE AND IMPACT OF THE STUDY: The method described is useful for the screening of cereals in industrial quality control.     

Campylobacter spp. subtype analysis using gel-based repetitive extragenic palindromic-PCR discriminates in parallel fashion to flaA short variable region DNA sequence analysis

AIMS: The repetitive extragenic palindromic-PCR (rep-PCR) subtyping technique, which targets repetitive extragenic DNA sequences in a PCR, was optimized for Campylobacter spp. These data were then used for comparison with the established genotyping method of flaA short variable region (SVR) DNA sequence analysis as a tool for molecular epidemiology. METHODS AND RESULTS: Uprime Dt, Uprime B1 or Uprime RI primers were utilized to generate gel-based fingerprints from a set of 50 Campylobacter spp. isolates recovered from a variety of epidemiological backgrounds and sources. Analysis and phenogram tree construction, using the unweighted pair group method with arithmetic mean, of the generated fingerprints demonstrated that the Uprime Dt primers were effective in providing reproducible patterns (100% typability, 99% reproducibility) and at placing isolates into epidemiological relevant groups. Genetic stability of the rep-PCR Uprime Dt patterns under nonselective, short-term transfer conditions revealed a Pearson's correlation approaching 99%. These same 50 Campylobacter spp. isolates were analysed by flaA SVR DNA sequence analysis to obtain phylogenetic relationships. CONCLUSIONS: The Uprime Dt primer-generated rep-PCR phenogram was compared with a phenogram generated from flaA SVR DNA sequence analysis of the same isolates. Comparison of the two sets of resulting genomic relationships revealed that both methods segregated isolates into similar groups. SIGNIFICANCE AND IMPACT OF THE STUDY: These results indicate that rep-PCR analysis performed using the Mo Bio Ultra Clean Microbial Genomic DNA Isolation Kit for DNA isolation and the Uprime DT primer set for amplification is a useful and effective tool for accurate differentiation of Campylobacter spp. for subtyping and epidemiological analyses.     

Evaluation and applicability of a purification method coupled with nested PCR for the detection of Toxoplasma oocysts in water

AIMS: To describe the development, evaluation and applicability of a complete method for the detection of Toxoplasma gondii in water. METHODS AND RESULTS: The method incorporated concentration of water samples by Al(2)(SO(4))(3)-flocculation, purification by discontinuous sucrose gradients and detection of toxoplasmic DNA by 18S-rRNA nested PCR. Tap water replicates and natural water samples were seeded with defined numbers of Toxoplasma oocysts and processed for evaluation studies. When applied to environmental samples, the method gave highest detection sensitivities of 100 oocysts in river water and 10 oocysts in well- and sea water. The method was finally applied in 60 water samples of different quality and origin collected over a 14-month period. Toxoplasmic DNA was detected in four samples. CONCLUSIONS: The method offers an alternative towards improving current methods that can be used for the detection of Toxoplasma oocysts in environmental water samples. SIGNIFICANCE AND IMPACT OF THE STUDY: The method in its current form will be helpful for assessment of Toxoplasma contamination in water resources, particularly after outbreak events.     

A nucleic acid sequence-based amplification assay for real-time detection of norovirus genogroup II

AIMS: To use molecular beacon based nucleic acid sequence-based amplification (NASBA) to develop a rapid, sensitive, specific detection method for norovirus (NV) genogroupII (GII). METHODS AND RESULTS: A method to detect NV GII from environmental samples using real-time NASBA was developed. This method was routinely sensitive to 100 copies of target RNA and intermittent amplification occurred with as few as 10 copies. Quantitative estimates of viral load were possible over at least four orders of magnitude. CONCLUSIONS: The NASBA method described here is a reliable and sensitive assay for the detection of NV. This method has the potential to be linked to a handheld NASBA device that would make this real-time assay a portable and inexpensive alternative to bench-top, lab-based assays. SIGNIFICANCE AND IMPACT OF THE STUDY: The development of the real-time NASBA assay described here has resulted in a simple, rapid (<1 h), convenient testing format for NV. To our knowledge, this is the first example of a molecular beacon based NASBA assay for NV.     

Relationship between size and mass transfer resistance in aerobic granules

AIMS: To investigate the size effect of aerobic granules on mass transfer efficiency by introducing the effective factor and the modified Thiele modulus. METHODS AND RESULTS: Batch experiments of aerobic granules with different sizes were conducted to study the size effect of granules on mass transfer resistance. Results showed that both specific substrate removal and biomass growth rates were size dependent, i.e. reduced rates were observed at big sizes. It was found that the diffusion resistance described by the effective factor and the Thiele modulus increased with the increase of the size of aerobic granules. CONCLUSIONS: The effective factor should be controlled at values higher than 0.44 and the Thiele modulus lower than 1.05 for efficient mass transfer in aerobic granules. SIGNIFICANCE AND IMPACT OF THE STUDY: Based on the coupled effective factor and Thiele modulus, an operation guidance including granule radius, kinetics of biomass and environmental conditions could be proposed for stable aerobic granulation.     

Optimization of DNA isolation from legume nodules

AIMS: The aim of this study was to optimize DNA extraction from legume nodules to obtain large amounts of high-quality genomic DNA. METHODS AND RESULTS: Nodules of different legume species were used. Varied concentrations of guanidine thiocyanate (from 6 mol l(-1) to 0.05 mmol l(-1)), a component of DNAzol, were tested. The quality of DNA extract was determined by PCR-RFLP. The best results were obtained with 0.5 mmol l(-1) guanidine thiocyanate, which resulted in greater DNA yield than with higher and lower concentrations or with DNAzol. CONCLUSION: The procedure using 0.5 mmol l(-1) guanidine thiocyanate yields the highest DNA amount when compared with previously described protocols and offers a reliable method to isolate DNA from nodules of different origins. SIGNIFICANCE AND IMPACT OF THE STUDY: Irrespective of nodule origin, DNA yield was increased significantly, by two (e.g., Vigna nodules) to seven (Acacia auricoliformis nodules) times. In addition, the proposed procedure's costs are lower than those using the DNAzol.     

Contaminant yeast detection in industrial ethanol fermentation must by rDNA-PCR

AIMS: The present work focuses on the possibility to use conserved primers that amplify yeast ITS1-5.8S-ITS2 ribosomal DNA locus (rDNA) to detect the presence of non-Saccharomyces cerevisiae yeast in fermentation must of bioethanol fermentation process. METHODS AND RESULTS: Total DNA was extracted from pure or mixed yeast cultures containing different cell concentrations and different contaminant/fermenting yeast concentrations and submitted to PCR. Upon improvement of detection limits and DNA extraction protocol, must samples of distillery were checked for the presence of contaminant yeast. Contaminant rDNA bands were detected only in industrial samples during contamination episodes, but not in noncontaminated must. CONCLUSIONS: The method described here could detect the presence of contaminant yeast from industrial must in eight hours after sampling. SIGNIFICANCE AND IMPACT OF THE STUDY: The improved procedure may help to avoid severe contamination episodes at fermentation industries by decreasing the detection time from 5 days to 8 h and possible quantification of contaminant yeasts that can impose economical loss to the process.