Stability and activity of alcohol dehydrogenases in W/O-microemulsions: enantioselective reduction including cofactor regeneration

Microemulsions provide an interesting alternative to classical methods for the conversion of less water-soluble substrates by alcohol dehydrogenase, but until now stability and activity were too low for economically useful processes. The activity and stability of the enzymes are dependent on the microemulsion composition, mostly the water and the surfactant concentration. Therefore, it is necessary to know the exact phase behavior of a given microemulsion reaction system and the corresponding enzyme behavior therein. Because of their economic and ecologic suitability polyethoxylated fatty alcohols were investigated concerning their phase behavior and their compatibility with enzymes in ternary mixtures. The phase behavior of Marlipal O13-60 (C13EO6 in industrial quality)/cyclohexane/water and its effect on the activity and stability of alcohol dehydrogenase from Yeast (YADH) and horse liver (HLADH) and the carbonyl reductase from Candida parapsilosis (CPCR) is presented in this study. Beside the macroscopic phase behavior of the reaction system, the viscosity of the system indicates structural changes of aggregates in the microemulsion. The changes of the enzyme activities with the composition are discussed on the basis of transitions from reverse micelles to swollen reverse micelles and finally, the transition to the phase separation. The formate dehydrogenase from Candida boidinii was used for the NADH-regeneration during reduction reactions. While the formate dehydrogenase did not show any kinetic effect on the microemulsion composition, the other enzymes show significant changes of activity and stability varying the water or surfactant concentration of the microemulsion. Under certain conditions, stability could be maintained with HLADH for several weeks. Successful experiments with semi-batch processes including cofactor regeneration and product separation were performed.     

Enzyme and organic solvents: horse liver alcohol dehydrogenase in non-ionic microemulsion: stability and activity

In a microemulsion made with Triton X-100, the stability of the enzymatic activity was higher than in ionic microemulsions. The stability increased with water content. The kinetic constants (Michaelis constant of NAD+ and maximum velocity) were close to those found in the previously studied microemulsions. The Michaelis constant of NAD+ expressed with respect to the buffer volume was higher than in water. The pH dependence of the kinetic constants in this microemulsion was determined. The activity determined by NAD+ reduction decreased with water content, whereas the redox activity determined via butanol oxidation coupled to retinal reduction was only slightly reduced.     

Three Systems Used for Biocatalysis in Organic Solvents a Comparative Study

The activity and operational stability of horse liver alcohol dehydrogenase (HLADH) and α-chymotrypsin were investigated in three systems commonly used for biocatalysis in organic solvents:

1. enzyme adsorbed on a solid support (celite) and added to the organic solvent (isooctane)

2. enzyme powder directly added to the organic solvent (isooctane).

3. enzyme dissolved in a microemulsion (AOT/isooctane).

The activity and the operational stability in all systems were strongly dependent on the water content. The initial reaction rate was high in both the microemulsion and the celite system, but was much lower when adding the enzymes directly to the organic solvent. HLADH was observed to be more stable when added directly to the organic solvent or dissolved in the microemulsion than when adsorbed on celite, whereas for α-chymotrypsin stability was higher when adsorbed on celite or added directly to the organic solvent. For a hydrolytic reaction, a microemulsion was preferred due to the high water content. When adding the enzymes directly to the organic solvent both HLADH and chymotrypsin were adsorbed strongly to the glass walls of the reaction vessel. None of the systems were superior in all respects for the two enzymes studied.     

Formulation,Characterization, and Clinical Evaluation of Microemulsion Containing Clotrimazole for Topical Delivery

The objective of the present study was to formulate and evaluate microemulsion systems for topical delivery of clotrimazole (CTM). The solubility of CTM in various oils was determined to select the oil phase of the microemulsion systems. Pseudoternary phase diagrams were constructed to identify the area of microemulsion existence. Five CTM microemulsion formulations (M1–M5) were prepared and evaluated for their thermodynamic stability, pH, refractive index, droplet size, viscosity, and in vitro release across cellulose membrane. Among the prepared microemulsion formulations, M3 (lemon oil/Tween 80/n-butanol/water) and M4 (isopropyl myristate/Tween 80/n-butanol/water) microemulsion systems were found to be promising according to their physical properties and CTM cumulative percentage release. Gel form of M3 and M4 were prepared using 1% Carbopol 940 as the hydrogel matrix. Both formulations were evaluated in the liquid and gel forms for drug retention in the skin in comparison to the marketed CTM topical cream and their stability examined after storage at 40°C for 6 months. Microemulsion formulations achieved significantly higher skin retention for CTM over the CTM cream. Stability studies showed that M4 preparations were more stable than M3. The in vitro anti-fungal activity of M4 against Candida albicans was higher than that of the conventional cream. Moreover, clinical evaluation proved the efficacy and tolerability of this preparation in the treatment of various topical fungal infections.     

非离子反胶束中木素过氧化物酶催化性能研究

木素过氧化物酶（LiP）在环己烷/Brij30/水反胶束体系中可体现催化活力,然而在水/醇/TritonX100/环己烷反胶束体系中却没有催化活力。对影响Brij30反胶束中LiP催化活力各主要因素进行了优化并测定了LiP在其中的时间稳定性;结果表明,20℃下,使LiP体现最佳活力的Brij30反胶束介质条件为：ω₀＝8.5,pH＝2.2,［Brij30］＝600mmol/L;在此条件下,LiP的半衰期可达到50h;与水介质相比,酶活力下降了,但稳定性却提高了。直链醇是TritonX100形成反胶束的必要组分,为揭示醇的作用,还考察了戊醇对Brij30 反胶束中LiP催化活力的影响,发现高浓度戊醇对LiP有失活作用。据此推测助表面活性剂醇可能是LiP在环己烷/TritonX100/戊醇/水反胶束中不能体现催化活力的主要原因。     

Micellar catalysis of polyphenol oxidase in AOT/cyclohexane

The catalytic behaviour of mushroom polyphenol oxidase has been studied in dioctylsulphosuccinate (AOT)/cyclohexane reverse micelles. The steady-state conditions were accomplished up to 20 min and 17 μg protein in the assay towards 4-methylcatechol and no loss of specific activity was observed relative to aqueous medium. The pH activity profile of the enzyme was kept in reverse micelles as in water, showing a plateau between 5 and 6.5. The stability of polyphenol oxidase to pH was also studied and about 20% inactivation was found in reverse micelles relative to aqueous medium at neutral pHs. Moreover there was a decrease of stability at acidic pHs. The optimum W_o obtained was 20 and the enzyme was nearly independent of the surfactant concentration at constant W_o.

Kinetic studies of polyphenol oxidase towards several substrates showed that the substrate inhibition by p-cresol and 4-methylcatechol observed in buffer was not kept in AOT/cyclohexane reverse micelles. Moreover, the K_m increased and the catalytic efficiency (V/K_m) of the enzyme decreased as the hydrophobicity of substrates was increased.     

Photosynthetic activity of cyanobacteria in water-in-oil microemulsions

The solubilization and the photosynthetic activity of cyanobacteria (Anabaena variabilis) in water-in-oil microemulsions consisting of (Tween85/Span80)/hexadecane/water is investigated. Transparent and stable solutions containing up to 10(8) cells/mL could be obtained. The physical state and stability of the cells in the microemulsion, as evidenced from optical and electron microscopy, is dependent upon the physical parameters of the system, and in particular on the hydrophylic-lypophilic balance (HLB) of the surfactant system. Conditions could be found, under which the cells in the microemulsion system display photosynthetic activity This was judged by measuring polarographically the oxygen evolution and by studying the photosynthetic activity in the presence of specific inhinbitors.     

Synthesis of pentylferulate by a feruloyl esterase from Aspergillus niger using water-in-oil microemulsions

Pentylferulate synthesis was achieved at high yields (50–60%) with Aspergillus niger feruloyl esterase using a water-in-oil microemulsion system. The initial rate of synthesis decreased by 15–20% when the water content of the microemulsion was increased from 1.8 to 2.4% (v/v), although a concomitant decrease in conversion was not observed. The enzyme stability was significantly higher in the microemulsion than in an aqueous solution.     

Development of W/O Microemulsion for Transdermal Delivery of Iodide Ions

The objective of this study was to develop a water-in-oil (w/o) microemulsion which can be utilized as a transdermal delivery for iodide ions. Several w/o microemulsion formulations were prepared utilizing Span 20, ethanol, Capryol 90®, and water. The selected formulations had 5%, 10%, 15%, 20%, and a maximum of 23% w/w water content. Potassium iodide (KI) was incorporated in all formulations at 5% w/v. Physicochemical characterizations were conducted to evaluate the structure and stability. These studies included: mean droplet size, pH, viscosity, conductivity, and chemical stability tests. In vitro human skin permeation studies were conducted to evaluate the diffusion of the iodide ion through human skin. The w/o microemulsion formulations were stable and compatible with iodide ions with water content ranging from 5% to 23% w/w. The addition of KI influenced the physicochemical properties of microemulsion as compared to blank microemulsion formulations. In vitro human skin permeation studies indicated that selected formulations improved iodide ion diffusion significantly as compared to control (KI solution; P value < 0.05). Iodide ions were entrapped within the aqueous core of w/o microemulsion. Span 20, ethanol and Capryol 90 protected the iodide ions against oxidation and formed a stable microemulsion. It is worth to note that according to Hofmeister series, iodide ions tend to lower the interfacial tension between water and oil and consequently enhance overall stability. This work illustrates that microemulsion system can be utilized as a vehicle for the transdermal administration of iodide.KEY WORDS: iodide, microemulsion, skin permeation, transdermal     

Influence of Igepal reverse micellar and micellar systems on activity and stability of heme peroxidases

The activities of horseradish peroxidase (HRP) and lactoperoxidase (LPO) entrapped in reverse micelles of Igepal CO-520 in cyclohexane were studied. When the molar ratio of water to surfactant, w ₀ was ≥13, the activity of HRP encapsulated in the water pool of the reverse micelle was comparable with that measured in buffer. For LPO, however, lower activity was observed after its incorporation into the same system.

The activity of the investigated peroxidases was also measured in an aqueous solution of Igepal CO-720 or after incubation with this surfactant. The enzymes became inactivated in an aqueous micellar solution of Igepal CO-720, although this process was reversible.

The stability of HRP and LPO at 37 or 50°C was lower in the micellar systems than in buffer with the exception for HRP in reverse micelles at 50°C.     

Stability and Enzymatic Studies of Glucose Dehydrogenase from the Archaeon Haloferax mediterranei in reverse micelles

Reverse micelles were used as a cytoplasmic model to study the kinetics of an extreme halophilic enzyme such as the recombinant glucose dehydrogenase from the Archaeon Haloferax mediterranei. This enzyme was solubilized in reverse micelles of hexadecyltrimethylammoniumbromide in cyclohexane, with 1-butanol as co-surfactant. Glucose dehydrogenase retained its catalytic properties in this organic medium, showing good stability at low water content, even at low salt concentration (125 mM NaCl). The dependence of the enzymatic activity on the molar water surfactant ratio (w₀=[H₂O]/[surfactant]) increased with rising water content. Surprisingly, the activity of this extreme halophilic enzyme did not depend on the salt concentration in reverse micelles. The kinetic of the enzymatic oxidation of β-D-glucose to D-glucono-1,5-lactone using NADP⁺ as coenzyme for the glucose dehydrogenase from Haloferax mediterranei was also studied in the reverse micellar system.     

Structure-Activity Relationship of a U-Type Antimicrobial Microemulsion System

The structure-activity relationship of a U-type antimicrobial microemulsion system containing glycerol monolaurate and ethanol at a 1∶1 mass ratio as oil phase and Tween 20 as surfactant were investigated along a water dilution line at a ratio of 80∶20 mass% surfactant/oil phase, based on a pseudo-ternary phase diagram. The differential scanning calorimetry results showed that in the region of up to 33% water, all water molecules are confined to the hydrophilic core of the reverse micelles, leading to the formation of w/o microemulsion. As the water content increases, the water gains mobility, and transforms into bicontinuous in the region of 33–39% water, and finally the microemulsion become o/w in the region of above 39% water. The microstructure characterization was confirmed by the dynamic light scattering measurements and freeze-fracture transmission electron microscope observation. The antimicrobial activity assay using kinetics of killing analysis demonstrated that the microemulsions in w/o regions exhibited relatively high antimicrobial activity against Escherichia coli and Staphylococcus aureus due to the antimicrobial oil phase as the continuous phase, while the antimicrobial activity started to decrease when the microemulsions entered the bicontinuous region, and decreased rapidly as the water content increased in the o/w region, as a result of the dilution of antimicrobial oil droplets in the aqueous continuous phase.     

Effect of Formulation Components on the In Vitro Permeation of Microemulsion Drug Delivery System of Fluconazole

The purpose of this study was to evaluate the effect of formulation components on the in vitro skin permeation of microemulsion drug delivery system containing fluconazole (FLZ). Lauryl alcohol (LA) was screened as the oil phase of microemulsions. The pseudo-ternary phase diagrams for microemulsion regions were constructed using LA as the oil, Labrasol (Lab) as the surfactant and ethanol (EtOH) as the cosurfactant. The formulation which showed a highest permeation rate of 47.15 ± 1.12 μg cm⁻² h⁻¹ and appropriate physicochemical properties was optimized as containing 2% FLZ, 10% LA, 20% Lab/EtOH (1:1), and 68% double-distilled water (w/w). The efficiency of microemulsion formulation in the topical delivery of FLZ was dependent upon the contents of water and LA as well as Lab/EtOH mixing ratio. It was concluded that the percutaneous absorption of FLZ from microemulsions was enhanced with increasing the LA and water contents, and with decreasing the Lab/EtOH ratio in the formulation. Candida albicans was used as a model fungus to evaluate the antifungal activity of the best formula achieved, which showed the widest zone of inhibition as compared to FLZ reference. The studied microemulsion formulation showed a good stability for a period of 3 months. These results indicate that the studied microemulsion formulation might be a promising vehicle for topical delivery of FLZ.     

Characteristics of Lipase-Catalyzed Glycerolysis of Triglyceride in AOT-Isooctane Reversed Micelles

Chromobacterium viscosum lipase, solubilized in microemulsion droplets of glycerol containing small amounts of water and stabilized by a surfactant, could catalyze the glycerolysis of triolein. Kinetic analysis of the lipase-catalyzed reaction was possible in the reversed micellar system. Among surfactants and organic solvents tested, bis(2-ethylhexyl)sodiumsulfosuccinate (AOT) and isooctane were respectively most effective, for the glycerolysis of triolein in reversed micelles. Temperature effects, pH profile, K_m,app, and V_max,app were determined. Among various chemical compounds, Fe³⁺, Cu²⁺, and Hg²⁺ inhibited the lipase-catalyzed glycerolysis severely. However, the glycerolysis activity was partially restorable by adding histidine or glycine to the system containing these metal ions. The glycerolysis activity was dependent on water content and maximum activity was obtained at an R value of 1.21. Higher stability of the lipase was obtained in the reversed micellar system.     

Stability of a Fusarium solani pisi recombinant cutinase in phosphatidylcholine reversed micelles

Summary A Fusarium solani pisi recombinant cutinase solubilized in phosphatidylcholine/isooctane reversed micelles was used to catalyse the esterification reaction of butyric acid with 2-butanol at pH 10.7. The influence of temperature, Wo and substrates on lipase stability was evaluated. The enzyme displays a better stability, with a half-life over 125 days, at a temperature of 22°C and for a low water content (W_O= 6.5). Butyric acid increased the cutinase deactivation (t_1/2=0.56h), while 2-butanol led to a similar half-life (t_1/2=14h) as without substrate.     

Detergentless microemulsions as media for enzymatic reactions. Cholesterol oxidation catalyzed by cholesterol oxidase

Catalytic activity and stability of cholesterol oxidase dissolved in ternary systems composed of n-hexane, isopropanol, and water were studied. The dependence of catalytic activity on the composition of the system revealed two maxima, in contrast to the behaviour of previously studied enzymes where a single maximum has been observed. The stability profile of cholesterol oxidase showed a single sharp maximum coinciding with the microemulsion region of the phase diagram. Both catalytic activity and the first-order inactivation rate constant of cholesterol oxidase dissolved in n-hexane/isopropanol/water ternary systems were found to decrease with decreasing temperature. This decrease was more rapid for the inactivation rate constant than for catalytic activity, the activation energies being 200 and 60 kJ.mol-1, respectively. Preparative conversion of cholesterol to cholestenone catalyzed by cholesterol oxidase in n-hexane/isopropanol/water ternary systems was carried out with 100% yield. Decreased temperature and the presence of catalase were required to achieve high degrees of cholesterol conversion. A simple procedure suitable for rapid separation of the reaction product and recovery of the enzyme was developed.     

Microemulsion-Based Vaginal Gel of Clotrimazole: Formulation, In Vitro Evaluation, and Stability Studies

The objective of the present investigation was to develop and evaluate microemulsion-based gel for the vaginal delivery of clotrimazole (CMZ). The solubility of CMZ in oils and surfactants was evaluated to identify components of the microemulsion. The ternary diagram was plotted to identify the area of microemulsion existence. Various gelling agents were evaluated for their potential to gel the CMZ microemulsion without affecting its structure. The bioadhesive potential and antifungal activity of the CMZ microemulsion-based gel (CMZ-MBG) was determined in comparison to the marketed clotrimazole gel (Candid-V® gel) by in vitro methods. The chemical stability of CMZ in CMZ-MBG was determined as per the International Conference on Harmonization guidelines. The CMZ microemulsion exhibited globule size of 48.4 nm and polydispersity index of 0.75. Carbopol® ETD 2020 could successfully gel the CMZ microemulsion without disturbing the structure. The CMZ-MBG showed significantly higher (P < 0.05) in vitro bioadhesion and antifungal activity as compared to that of Candid-V® gel. The stability studies indicated that CMZ undergoes acidic pH-catalyzed degradation at all the storage conditions at the end of 3 months.Key words: clotrimazole, microemulsion, microemulsion-based vaginal gel, stability studies, vaginal delivery     

Measurements of hydrodynamic diameter of AOT reverse micelles containing lipase in supercritical ethane and its enzymatic reaction

The enzymatic reaction by aerosol-OT (AOT)reverse micelles containing lipase in supercritical ethane was examined and is the focus of this paper. The reverse micelles were formed under various conditions at which their hydrodynamic diameters were measured by using the dynamic light scattering spectrophotometer. The reverse micelles in supercritical ethane were formed in the range of Wo (water/surfactant) less than six. The hydrodynamic diameter of the reverse micelles ranged from 2 to 5 microm. The hydrolysis reaction of triolein by the lipase in reverse micelles was also examined. The observations indicate that lipase in AOT reverse micelles in supercritical ethane showed activity. The conversion of triolein increased with the increase in size of reverse micelles and Wo, and reached its maximum near the critical temperature. Moreover, although the conversion of triolein increased with pressure, it was independent of pressure near the critical temperature.     

Kinetics in microemulsion V. Glucose oxidase catalyzed oxidation of beta-D-glucose in aqueous, micellar and water-in-oil microemulsion media

The oxidation of beta-D-glucose by the enzyme glucose oxidase was studied in aqueous medium, in solutions of surfactants AOT (2-ethylhexylsulfosuccinate, sodium salt) TX-100 (polyethylene glycol p-tert octyl phenyl ether) and in w/o microemulsion medium (water/AOT/decane) at different water/AOT mole ratio (omega), pH, temperature and in presence of additives. The time-dependent activities of the enzyme in aqueous and microemulsion media were determined. The catalytic process was retarded in the presence of TX-100 and AOT. In microemulsion medium, kcat values exhibited a deformed W-shaped profile with omega. At pH 7, a maximum value of kcat was observed at omega = 10.6. The kcat values were found to be higher in microemulsion medium than in aqueous medium at both pH's 7 and 8. Activation parameters for the kinetic process were evaluated together with the thermodynamics of the enzyme-substrate Michaelis complex. The deltaG* was lower, whereas deltaH* and deltaS* were higher in microemulsion than in water. The Michaelis constant, KM was also lower in microemulsion. The inhibition effects of the additives, NaNO3 and NaC were studied in both aqueous and microemulsion media by examining their influences on catalytic constant, kcat and Michaelis constant KM. In microemulsion, both the additives NaNO3 and NaC produced non-competitive inhibition.