Structure and function of the hairpin ribozyme

The hairpin ribozyme belongs to the family of small catalytic RNAs that cleave RNA substrates in a reversible reaction that generates 2',3'-cyclic phosphate and 5'-hydroxyl termini. The hairpin catalytic motif was discovered in the negative strand of the tobacco ringspot virus satellite RNA, where hairpin ribozyme-mediated self-cleavage and ligation reactions participate in processing RNA replication intermediates. The self-cleaving hairpin, hammerhead, hepatitis delta and Neurospora VS RNAs each adopt unique structures and exploit distinct kinetic and catalytic mechanisms despite catalyzing the same chemical reactions. Mechanistic studies of hairpin ribozyme reactions provided early evidence that, like protein enzymes, RNA enzymes are able to exploit a variety of catalytic strategies. In contrast to the hammerhead and Tetrahymena ribozyme reactions, hairpin-mediated cleavage and ligation proceed through a catalytic mechanism that does not require direct coordination of metal cations to phosphate or water oxygens. The hairpin ribozyme is a better ligase than it is a nuclease while the hammerhead reaction favors cleavage over ligation of bound products by nearly 200-fold. Recent structure-function studies have begun to yield insights into the molecular bases of these unique features of the hairpin ribozyme.     

Ion-induced folding of the hammerhead ribozyme: a fluorescence resonance energy transfer study.

The ion-induced folding transitions of the hammerhead ribozyme have been analysed by fluorescence resonance energy transfer. The hammerhead ribozyme may be regarded as a special example of a three-way RNA junction, the global structure of which has been studied by comparing the distances (as energy transfer efficiencies) between the ends of pairs of labelled arms for the three possible end-to-end vectors as a function of magnesium ion concentration. The data support two sequential ion-dependent transitions, which can be interpreted in the light of the crystal structures of the hammerhead ribozyme. The first transition corresponds to the formation of a coaxial stacking between helices II and III; the data can be fully explained by a model in which the transition is induced by a single magnesium ion which binds with an apparent association constant of 8000-10 000 M-1. The second structural transition corresponds to the formation of the catalytic domain of the ribozyme, induced by a single magnesium ion with an apparent association constant of approximately 1100 M-1. The hammerhead ribozyme provides a well-defined example of ion-dependent folding in RNA.     

Sequence elements outside the hammerhead ribozyme catalytic core enable intracellular activity

The hammerhead ribozyme (HHRz) is a small, naturally occurring ribozyme that site-specifically cleaves RNA and has long been considered a potentially useful tool for gene silencing. The minimal conserved HHRz motif derived from natural sequences consists of three helices that intersect at a highly conserved catalytic core of 11 nucleotides. The presence of this motif is sufficient to support cleavage at high Mg2+ concentrations, but not at the low Mg2+ concentrations characteristic of intracellular environments. Here we demonstrate that natural HHRzs require the presence of additional nonconserved sequence elements outside of the conserved catalytic core to enable intracellular activity. These elements may stabilize the HHRz in a catalytically active conformation via tertiary interactions. HHRzs stabilized by these interactions cleave efficiently at physiological Mg2+ concentrations and are functional in vivo. The proposed role of these tertiary interacting motifs is supported by mutational, functional, structural and molecular modeling analysis of natural HHRzs.     

The influence of imperfectly paired helices I and III on the catalytic activity of hammerhead ribozymes.

Several catalytic antisense RNAs directed against different regions of the genomic or antigenomic RNA of Sendai virus were constructed. All RNAs contained the same catalytic domain based on hammerhead ribozymes but some had deletions or mutations resulting in imperfect helices I and III. Pre-annealed substrate/ribozyme complexes were used to determine the rates of the cleavage process for the different ribozymes under single-turnover conditions. It was found that the sequence context surrounding the cleavable motif influenced the cleavage efficiencies. Deletions or mutations of nucleotides 2.1 or 15.1 and 15.2 according to the numbering system for hammerhead ribozymes of Hertel et al. destroyed catalytic activity. Deletions of nucleotide 2.2 or additional nucleotides in the helix I-forming region of the ribozyme did not destruct, but only reduced the cleavage efficiencies. Similar results were observed for a deletion of nucleotide 15.3. Simultaneous deletions within helices I and III resulted in alternative cleavage sites. The potential consequences for the specificity of the ribozyme reaction are discussed.     

The effect of structure in a long target RNA on ribozyme cleavage efficiency.

Inhibition of gene expression by catalytic RNA (ribozymes) requires that ribozymes efficiently cleave specific sites within large target RNAs. However, the cleavage of long target RNAs by ribozymes is much less efficient than cleavage of short oligonucleotide substrates because of higher order structure in the long target RNA. To further study the effects of long target RNA structure on ribozyme cleavage efficiency, we determined the accessibility of seven hammerhead ribozyme cleavage sites in a target RNA that contained human immunodeficiency virus type 1 (HIV-1) vif - vpr . The base pairing-availability of individual nucleotides at each cleavage site was then assessed by chemical modification mapping. The ability of hammerhead ribozymes to cleave the long target RNA was most strongly correlated with the availability of nucleotides near the cleavage site for base pairing with the ribozyme. Moreover, the accessibility of the seven hammerhead ribozyme cleavage sites in the long target RNA varied by up to 400-fold but was directly determined by the availability of cleavage sites for base pairing with the ribozyme. It is therefore unlikely that steric interference affected hammerhead ribozyme cleavage. Chemical modification mapping of cleavage site structure may therefore provide a means to identify efficient hammerhead ribozyme cleavage sites in long target RNAs.     

Chimeric DNA-RNA hammerhead ribozymes have enhanced in vitro catalytic efficiency and increased stability in vivo.

Subsequent to the discovery that RNA can have site specific cleavage activity, there has been a great deal of interest in the design and testing of trans-acting catalytic RNAs as both surrogate genetic tools and as therapeutic agents. We have been developing catalytic RNAs or ribozymes with target specificity for HIV-1 RNA and have been exploring chemical synthesis as one method for their production. To this end, we have chemically synthesized and experimentally analyzed chimeric catalysts consisting of DNA in the non-enzymatic portions, and RNA in the enzymatic core of hammerhead type ribozymes. Substitutions of DNA for RNA in the various stems of a hammerhead ribozyme have been analyzed in vitro for kinetic efficiency. One of the chimeric ribozymes used in this study, which harbors 24 bases of DNA capable of base-pairing interactions with an HIV-1 gag target, but maintains RNA in the catalytic center and in stem-loop II, has a sixfold greater kcat value than the all RNA counterpart. This increased activity appears to be the direct result of enhanced product dissociation. Interestingly, a chimeric ribozyme in which stem-loop II (which divides the catalytic core) is comprised of DNA, exhibited a marked reduction in cleavage activity, suggesting that DNA in this region of the ribozyme can impart a negative effect on the catalytic function of the ribozyme. DNA-RNA chimeric ribozymes transfected by cationic liposomes into human T-lymphocytes are more stable than their all-RNA counterparts. Enhanced catalytic turnover and stability in the absence of a significant effect on Km make chimeric ribozymes favorable candidates for therapeutic agents.     

HIV-1 TAR as anchoring site for optimized catalytic RNAs

Ribozymes have a great potential for developing specific gene silencing molecules. One of the main limitations to ensure the efficient application of ribozymes is to achieve effective binding to the target. Stem-loop domains support efficient formation of the kissing complex between natural antisense molecules and their target sequence. We have characterized catalytic antisense RNA hybrid molecules composed of a hammerhead ribozyme and a stem-loop antisense domain. A series of artificial RNA substrates containing the TAR-RNA stem-loop and a target for the hammerhead ribozyme were constructed and challenged with a catalytic antisense RNA carrying the TAR complementary stem-loop. The catalytic antisense RNA cleaves each of these substrates significantly more efficiently than the parental hammerhead ribozyme. Deletion of the TAR domain in the substrate abolishes the positive effect. These results suggest that the enhancement is due to the interaction of both complementary stem-loop motifs. A similar improvement was corroborated when targeting the LTR region of HIV-1 with either hammerhead- and hairpin-based catalytic antisense RNAs. Our results indicate that the TAR domain can be used as an anchoring site to facilitate the access of ribozymes to their specific target sequences within TAR-containing RNAs. Finally, we propose the addition of stable stem-loop motifs to the ribozyme domain as a rational way for constructing catalytic antisense RNAs.     

Unbiased in vitro selection reveals the unique character of the self-cleaving antigenomic HDV RNA sequence

In order to revisit the architecture of the catalytic center of the antigenomic hepatitis delta virus (HDV) ribozyme we developed an unbiased in vitro selection procedure that efficiently selected novel variants from a relatively small set of sequences. Using this procedure we examined all possible variants from a pool of HDV ribozymes that had been randomized at 25 positions (4²⁵). The isolated set of sequences shows more variability than do the natural variants. Nucleotide variations were found at all randomized positions, even at positions when the general belief was that the specific base was absolutely required for catalytic activity. Covariation analysis supports the presence of several base pairs, although it failed to propose any new tertiary contacts. HDV ribozyme appears to possess a greater number of constraints, in terms of sequences capable of supporting the catalysed cleavage, than do other catalytic RNAs. This supports the idea that the appearance of this catalytic RNA structure has a low probability (i.e. is a rare event), which may explain why to date it has been found in nature only in the HDV. These contrasts with the hammerhead self-cleaving motif that is proposed to have multiple origins, and that is widespread among different organisms. Thus, just because a self-cleaving RNA motif is small does not imply that it occurs easily.     

Inhibition of hepatitis B virus by hammerhead ribozyme targeted to the poly(A) signal sequence in cultured cells

The deviant poly(A) signal of hepatitis B virus (HBV) not only controls the formation of the 3' end of all the viral RNA, but is also crucial for HBV replication. Hence, a cis-releasing hammerhead ribozyme (RzA) targeted to the poly(A) signal region of HBV subtype adr was investigated for its antiviral effects. In vitro, RzA cleaved HBV RNA at its target site up to 70%, while the disabled ribozyme (dRzA), which had a one-base mutation in the catalytic site, did not cleave the target RNA at all. When the ribozymes were cotransfected into HepG2 cells with the HBV genome-containing plasmid p3.6II, the wild-type ribozyme RzA could effectively decrease HBV RNA levels and inhibit HBV replication, whereas its disabled form, dRzA, had much weaker effects, indicating that the active catalytic domain of the hammerhead ribozyme could markedly increase the extent of antisense-mediated inhibition. In addition, there was a gradient of effectiveness: the higher the amount of released ribozyme, the more the reduction in target HBV RNA in cells as well as progeny DNA reduction. These results suggest the possibility of the hammerhead ribozyme RzA to be used for the gene therapy of HBV infection.     

Predicting candidate genomic sequences that correspond to synthetic functional RNA motifs

Riboswitches and RNA interference are important emerging mechanisms found in many organisms to control gene expression. To enhance our understanding of such RNA roles, finding small regulatory motifs in genomes presents a challenge on a wide scale. Many simple functional RNA motifs have been found by in vitro selection experiments, which produce synthetic target-binding aptamers as well as catalytic RNAs, including the hammerhead ribozyme. Motivated by the prediction of Piganeau and Schroeder [(2003) Chem. Biol., 10, 103–104] that synthetic RNAs may have natural counterparts, we develop and apply an efficient computational protocol for identifying aptamer-like motifs in genomes. We define motifs from the sequence and structural information of synthetic aptamers, search for sequences in genomes that will produce motif matches, and then evaluate the structural stability and statistical significance of the potential hits. Our application to aptamers for streptomycin, chloramphenicol, neomycin B and ATP identifies 37 candidate sequences (in coding and non-coding regions) that fold to the target aptamer structures in bacterial and archaeal genomes. Further energetic screening reveals that several candidates exhibit energetic properties and sequence conservation patterns that are characteristic of functional motifs. Besides providing candidates for experimental testing, our computational protocol offers an avenue for expanding natural RNA's functional repertoire.     

Minimum ribonucleotide requirement for catalysis by the RNA hammerhead domain.

Several mixed DNA/RNA and 2'-O-methylribonucleotide/RNA analogues derived from the "hammerhead" domain of RNA catalysis have been prepared to study the minimum ribonucleotide requirement for catalytic activity. Oligodeoxyribonucleotides containing from seven to as few as four ribonucleotides are active in cleaving a substrate RNA. Predominantly deoxyribonucleotide-containing analogues have kcat values 20-300 and kcat/KM values approximately 100-2000 times lower than those of all-RNA ribozyme. In the case of predominantly 2'-O-methyl analogues, at least five ribonucleotides are needed to assure catalytic activity. In addition, both predominantly deoxyribonucleotide and 2'-O-methyl oligomers are at least 3 orders of magnitude more stable than an all-RNA ribozyme in incubations with RNase A and a yeast extract. These results suggest that the ribophosphate backbone is not a strict requirement for ribozyme-type catalysis. The identification of the four required ribonucleotides in the hammerhead catalytic domain provides valuable information for the rational design of chemical species having ribonuclease activities.     

The genomic HDV ribozyme utilizes a previously unnoticed U-turn motif to accomplish fast site-specific catalysis

The genome of the human hepatitis delta virus (HDV) harbors a self-cleaving catalytic RNA motif, the genomic HDV ribozyme, whose crystal structure shows the dangling nucleotides 5′ of the cleavage site projecting away from the catalytic core. This 5′-sequence contains a clinically conserved U − 1 that we find to be essential for fast cleavage, as the order of activity follows U − 1 > C − 1 > A − 1 > G − 1, with a >25-fold activity loss from U − 1 to G − 1. Terbium(III) footprinting detects conformations for the P1.1 stem, the cleavage site wobble pair and the A-minor motif of the catalytic trefoil turn that depend on the identity of the N − 1 base. The most tightly folded catalytic core, resembling that of the reaction product, is found in the U − 1 wild-type precursor. Molecular dynamics simulations demonstrate that a U − 1 forms the most robust kink around the scissile phosphate, exposing it to the catalytic C75 in a previously unnoticed U-turn motif found also, for example, in the hammerhead ribozyme and tRNAs. Strikingly, we find that the common structural U-turn motif serves distinct functions in the HDV and hammerhead ribozymes.     

Ubiquitous presence of the hammerhead ribozyme motif along the tree of life

Examples of small self-cleaving RNAs embedded in noncoding regions already have been found to be involved in the control of gene expression, although their origin remains uncertain. In this work, we show the widespread occurrence of the hammerhead ribozyme (HHR) motif among genomes from the Bacteria, Chromalveolata, Plantae, and Metazoa kingdoms. Intergenic HHRs were detected in three different bacterial genomes, whereas metagenomic data from Galapagos Islands showed the occurrence of similar ribozymes that could be regarded as direct relics from the RNA world. Among eukaryotes, HHRs were detected in the genomes of three water molds as well as 20 plant species, ranging from unicellular algae to vascular plants. These HHRs were very similar to those previously described in small RNA plant pathogens and, in some cases, appeared as close tandem repetitions. A parallel situation of tandemly repeated HHR motifs was also detected in the genomes of lower metazoans from cnidarians to invertebrates, with special emphasis among hematophagous and parasitic organisms. Altogether, these findings unveil the HHR as a widespread motif in DNA genomes, which would be involved in new forms of retrotransposable elements.     

Structure—function studies of the hammerhead ribozyme

Elucidation of the catalytic mechanism and structure—function relationship studies of the hammerhead ribozyme continue to be an area of intensive research. A combination of diverse approaches, such as X ray crystallography, spectral studies, chemical modifications, sequence variations and kinetic analyses, have provided valuable insight into the cleavage mechanism of this ribozyme. The hammerhead ribozyme crystal structures have provided valuable insight into conformational deformations needed to attain the catalytically active structure. Similarly, determination of ribozyme solution structure by spectroscopic analyses and the effect of divalent metal ions on RNA folding has further aided in the construction of a model for hammerhmead catalysis.     

Identification and characterization of a novel high affinity metal-binding site in the hammerhead ribozyme.

A novel metal-binding site has been identified in the hammerhead ribozyme by 31P NMR. The metal-binding site is associated with the A13 phosphate in the catalytic core of the hammerhead ribozyme and is distinct from any previously identified metal-binding sites. 31P NMR spectroscopy was used to measure the metal-binding affinity for this site and leads to an apparent dissociation constant of 250-570 microM at 25 degrees C for binding of a single Mg2+ ion. The NMR data also show evidence of a structural change at this site upon metal binding and these results are compared with previous data on metal-induced structural changes in the core of the hammerhead ribozyme. These NMR data were combined with the X-ray structure of the hammerhead ribozyme (Pley HW, Flaherty KM, McKay DB. 1994. Nature 372:68-74) to model RNA ligands involved in binding the metal at this A13 site. In this model, the A13 metal-binding site is structurally similar to the previously identified A(g) metal-binding site and illustrates the symmetrical nature of the tandem G x A base pairs in domain 2 of the hammerhead ribozyme. These results demonstrate that 31P NMR represents an important method for both identification and characterization of metal-binding sites in nucleic acids.     

Morphing the minimal and full-length hammerhead ribozymes: implications for the cleavage mechanism

The hammerhead ribozyme is a small, intensively studied catalytic RNA, and has been used as a prototype for understanding how RNA catalysis works. In 2003, the importance of a set of tertiary contacts that appear in natural sequences of the hammerhead RNA was finally understood. The presence of these contact regions in stems I and II in 'full-length hammerhead ribozymes' is accompanied by an up to 1000-fold catalytic rate enhancement, indicating a profound structural effect upon the active site. Although the new structure resolved most of what appeared to be irreconcilable differences with mechanistic studies in solution, it did so in a way that is simultaneously reconcilable with earlier crystallographic mechanistic studies, within the limits imposed by the truncated sequence of the minimal hammerhead. Here we present an analysis of the correspondence between the full-length and minimal hammerhead crystal structures, using adiabatic morphing calculations that for the first time test the hypothesis that the minimal hammerhead structure occasionally visits the active conformation, both in solution and in the crystalline state in a sterically allowed manner, and argue that this is the simplest hypothesis that consistently explains all of the experimental observations.     

Generation and application of asymmetric hammerhead ribozymes.

Most researchers who intend to suppress a particular gene are interested primarily in the application of ribozyme technology rather than its mechanistic details. This article provides some background information and describes a straightforward strategy to generate and test a special design of a ribozyme: the asymmetric hammerhead ribozyme. This version of a hammerhead ribozyme carries at its 5' end the catalytic domain and at its 3' end a relatively long antisense flank that is complementary to the target RNA. Asymmetric hammerhead ribozymes can be constructed via polymerase chain reaction amplification, and rules are provided on how to select the DNA oligonucleotides required for this reaction. In addition to details on construction, we describe how to test asymmetric hammerhead ribozymes for association with the target RNA in vitro, so that RNA constructs can be selected and optimized for fast hybridization with their target RNA. This test can allow one to minimize association problems caused by the secondary structure of the target RNA. Additionally, we describe the in vitro cleavage assay and the determination of the cleavage rate constant. Testing for efficient cleavage is also a prerequisite for reliable and successful application of the technology. A carefully selected RNA will be more promising when eventually used for target suppression in living cells.     

The effect of universal fluorinated nucleobases on the catalytic activity of ribozymes

Four fluoro modified universal nucleobases have been synthesized. The universal nucleobases 1 and 2, containing a 2,4-difluorobenzene as nucleobase and a 4,6-difluorobenzimidazole, respectively, were chemically incorporated into a selected hammerhead ribozyme sequence which has already been retrovirally expressed as an anti-HIV ribozyme to investigate their effect on the catalytic activity of the ribozymes. The substitution of the natural nucleosides with either 1 or 2 results only in a small decrease of the catalytic activity. The Km value for the monosubstituted ribozyme with a 2,4-difluorobenzene is 309 nM(-1), the corresponding kcat is 2.91 x 10(-3) min(-1). A disubstituted hammerhead ribozyme carrying one of each modification has also been synthesized. For a further stabilization of the ribozyme/substrate complex 2'-(beta-aminoethoxy) modified fluorinated nucleosides 15 and 16 have been developed.     

A three-nucleotide helix I is sufficient for full activity of a hammerhead ribozyme: advantages of an asymmetric design.

Trans-cleaving hammerhead ribozymes with long target-specific antisense sequences flanking the catalytic domain share some features with conventional antisense RNA and are therefore termed 'catalytic antisense RNAs'. Sequences 5' to the catalytic domain form helix I and sequences 3' to it form helix III when complexed with the target RNA. A catalytic antisense RNA of more than 400 nucleotides, and specific for the human immunodeficiency virus type 1 (HIV-1), was systematically truncated within the arm that constituted originally a helix I of 128 base pairs. The resulting ribozymes formed helices I of 13, 8, 5, 3, 2, 1 and 0 nucleotides, respectively, and a helix III of about 280 nucleotides. When their in vitro cleavage activity was compared with the original catalytic antisense RNA, it was found that a helix I of as little as three nucleotides was sufficient for full endonucleolytic activity. The catalytically active constructs inhibited HIV-1 replication about four-fold more effectively than the inactive ones when tested in human cells. A conventional hammerhead ribozyme having helices of just 8 nucleotides on either side failed to cleave the target RNA in vitro when tested under the conditions for catalytic antisense RNA. Cleavage activity could only be detected after heat-treatment of the ribozyme substrate mixture which indicates that hammerhead ribozymes with short arms do not associate as efficiently to the target RNA as catalytic antisense RNA. The requirement of just a three-nucleotide helix I allows simple PCR-based generation strategies for asymmetric hammerhead ribozymes. Advantages of an asymmetric design will be discussed.