Isolation and characterization of a component of the surface sheath of Dictyostelium discoideum

Aggregates of Dictyostelium discoideum are surrounded by a surface sheath which functions to maintain polarity and integrity during development. We have isolated and partially characterized a component of the surface sheath. It is composed of 60% cellulose, 15% protein, 3% heteropolysaccharide (heteropolymer), 5% lipid, and 1% sulfate when isolated from migrating slugs. The sheath, isolated from aggregates prior to tip formation, has less protein, a different heteropolymer, and cellulose of a lower crystallinity than the sheath of migrating slugs. The increase in crystallinity of the cellulose during development may be important in determining the strength of the surface sheath.     

Modelling Dictyostelium discoideum morphogenesis: the culmination

The culmination of the morphogenesis of the cellular slime mould Dictyostelium discoideum involves complex cell movements which transform a mound of cells into a globule of spores on a slender stalk. We show that cyclic AMP signalling and differential adhesion, combined with cell differentiation and slime production, are sufficient to produce the morphogenetic cell movements which lead to culmination. We have simulated the process of culmination using a hybrid cellular automata/partial differential equation model. With our model we have been able to reproduce the main features that occur during culmination, namely the straight downward elongation of the stalk, its anchoring to the substratum and the formation of the long thin stalk topped by the spore head. We conclude that the cyclic AMP signalling system is responsible for the elongation and anchoring of the stalk, but in a roundabout way: pressure waves that are induced by the chemotaxis towards cyclic AMP squeeze the stalk through the cell mass. This mechanism forces the stalk to elongate precisely in the direction opposite to that of the chemotactically moving cells. The process turns out to be ‘guided’ by inactive ‘pathfinder’ cells, which form the tip of the stalk. We show that the entire development is enacted by means of the aforementioned building blocks. This means that no global gradients or different modes of chemotaxis are needed to complete the culmination. MPEG movies of the simulations are available on-line: http://www-binf.bio. uu.nl/stan/bmb.     

Cell-cell adhesion and morphogenesis in Dictyostelium discoideum

During development of Dictyostelium discoideum, cells acquire EDTA-resistant cell-cell adhesion at the aggregation stage. The EDTA-resistant cell binding activity is associated with a cell surface glycoprotein of Mr 80,000 (gp80), which mediates cell-cell binding via homophilic interaction. Analysis of the structure of gp80 deduced from cDNA sequence reveals the presence of three internally homologous segments in the NH2-terminal domain, which also contains regions with homology to the neural cell adhesion molecule. Secondary structure predictions show an abundance of beta-structures and very few alpha-helices. This is confirmed by circular dichroism measurements. It is likely that the homologous segments are organized into globular structures, extended from the cell surface by a Pro-rich stalk domain. The cell binding activity of gp80 resides within the first globular repeat of the NH2-terminal domain and has been mapped to a 51 amino acid region between Val123 and Leu173. Synthetic oligopeptides corresponding to sequences within this region have been prepared and assayed for their ability to bind to cell surface gp80. Results lead to identification of the homophilic binding site to an octapeptide sequence within this region. Synthetic peptides containing this octapeptide sequence and univalent antibodies directed against this site block the formation of organized cell streams during aggregation. Although cell aggregates are eventually formed, most fail to undergo further development to give rise to slugs and fruiting bodies, indicating that cell-cell adhesion involving gp80 is an important step in normal morphogenesis.     

The trishanku gene and terminal morphogenesis in Dictyostelium discoideum

SUMMARY Multicellular development in the social amoeba Dictyostelium discoideum is triggered by starvation. It involves a series of morphogenetic movements, among them being the rising of the spore mass to the tip of the stalk. The process requires precise coordination between two distinct cell types—presumptive (pre-) spore cells and presumptive (pre-) stalk cells. Trishanku ( triA ) is a gene expressed in prespore cells that is required for normal morphogenesis. The triA⁻ mutant shows pleiotropic effects that include an inability of the spore mass to go all the way to the top. We have examined the cellular behavior required for the normal ascent of the spore mass. Grafting and mixing experiments carried out with tissue fragments and cells show that the upper cup, a tissue that derives from prestalk cells and anterior-like cells (ALCs), does not develop properly in a triA⁻ background. A mutant upper cup is unable to lift the spore mass to the top of the fruiting body, likely due to defective intercellular adhesion. If wild-type upper cup function is provided by prestalk and ALCs, trishanku spores ascend all the way. Conversely, Ax2 spores fail to do so in chimeras in which the upper cup is largely made up of mutant cells. Besides proving that under these conditions the wild-type phenotype of the upper cup is necessary and sufficient for terminal morphogenesis in D. discoideum , this study provides novel insights into developmental and evolutionary aspects of morphogenesis in general. Genes that are active exclusively in one cell type can elicit behavior in a second cell type that enhances the reproductive fitness of the first cell type, thereby showing that morphogenesis is a cooperative process.     

Effect of extracellular Ca2+ on the morphogenesis of Dictyostelium discoideum.

Effect of extracellular Ca²⁺ on the morphogenesis of the cellular slime mold Dictyostelium discoideum was examined on agar plate. The concentration of Ca²⁺ in agar plate was controlled by keeping the concentration of a chelating reagent EGTA constant and varying the concentration of total calcium. From experiments in which EGTA concentration was kept at 2.0 × 10^?3 M, it was found that by decreasing Ca²⁺ concentration the morphogenesis was modified so that development of the aggregating amebae into fruiting bodies was accelerated and the period of migrating slugs was shortened. Below 1.0 × 10^?3 M of Ca²⁺ concentration, the total number of aggregates initially increased with decreasing Ca²⁺ concentration, reached a maximum at about 3.0 × 10^?7 M of Ca²⁺ concentration and hereafter decreased with decreasing Ca²⁺ concentration. The number of mature fruiting bodies obtained at 36 h period after starvation depends on Ca²⁺ concentration and the total number of aggregates. The cell aggregation initiated at the same time period after starvation even at an extreme case of 1.0 × 10^?8 M of Ca²⁺ concentration as under enough Ca²⁺ supply, while the formation of mature fruiting body was seriously inhibited. These observation suggested that the cAMP-mediated cell aggregation in D. discoideum is a Ca²⁺-independent phenomena, although extracellular Ca²⁺ is necessary for the normal development of the aggregated amebae.     

Monoclonal antibody characterisation of slime sheath: the extracellular matrix of Dictyostelium discoideum

Proteins can be extracted from the slime sheath of Dictyostelium discoideum slugs by denaturing agents. A subset of these proteins is also released by cellulase digestion of the sheath, implying that protein-protein and protein-cellulose interactions are involved in sheath protein retention. It seems probable that the cellulose-associated sheath proteins are also associated with the cellulose of mature stalk cells. Monoclonal antibodies directed against sheath demonstrate extensive sharing of antigenic determinants between sheath proteins and a limited degree of antigenic sharing between sheath and slug cell proteins. All of the proteins recognised by these monoclonal antibodies are developmentally regulated. These results are discussed in terms of the structure of the sheath and its possible role(s) in D. discoideum development.     

Proteomic profiling of the extracellular matrix (slime sheath) of Dictyostelium discoideum

Dictyostelium discoideum has historically served as a model system for cell and developmental biology, but recently it has gained increasing attention as a model for the study of human diseases. The extracellular matrix (ECM) of this eukaryotic microbe serves multiple essential functions during development. It not only provides structural integrity to the moving multicellular pseudoplasmodium, or slug, it also provides components that regulate cell motility and differentiation. An LC/MS/MS analysis of slug ECM revealed the presence of a large number of proteins in two wild‐type strains, NC4 and WS380B. GO annotation identified a large number of proteins involved in some form of binding (e.g. protein, polysaccharide, cellulose, carbohydrate, ATP, cAMP, ion, lipid, vitamin), as well as proteins that modulate metabolic processes, cell movement, and multicellular development. In addition, this proteomic analysis identified numerous expected (e.g. EcmA, EcmD, discoidin I, discoidin II), as well as unexpected (e.g. ribosomal and nuclear proteins) components. These topics are discussed in terms of the structure and function of the ECM during the development of this model amoebozoan and their relevance to ongoing biomedical research.     

The role of diffusible molecules in regulating the cellular differentiation of Dictyostelium discoideum

A central problem in developmental biology is to understand how morphogenetic fields are created and how they act to direct regionalized cellular differentiation. This goal is being pursued in organisms as diverse as moulds, worms, flies, frogs and mice. Each organism has evolved its own solution to the challenge of multicellularity but there appear to be common underlying principles and, once pattern formation is fully understood in any system, some general truths seem certain to be revealed. As a non-obligate metazoan, Dictyostelium discoideum has proven a particularly tractable system in which to identify and characterize cellular morphogens. Cyclic AMP and ammonia stimulate prespore cell differentiation and ammonia plays an additional role in repressing terminal cellular differentiation. Differentiation Inducing Factor (DIF) acts to direct prestalk cell differentiation and adenosine may play a synergistic role in repressing prespore cell differentiation. This review summarizes the evidence for these interactions and describes a number of models which show how this small repertoire of diffusible molecules, acting in concert, may direct the formation of a differentiated structure.     

Trishanku, a novel regulator of cell-type stability and morphogenesis in Dictyostelium discoideum

We have identified a novel gene, trishanku (triA), by random insertional mutagenesis of Dictyostelium discoideum. TriA is a Broad complex Tramtrack bric-a-brac domain-containing protein that is expressed strongly during the late G2 phase of cell cycle and in presumptive spore (prespore (psp)) cells. Disrupting triA destabilizes cell fate and reduces aggregate size; the fruiting body has a thick stalk, a lowered spore: stalk ratio, a sub-terminal spore mass and small, rounded spores. These changes revert when the wild-type triA gene is re-expressed under a constitutive or a psp-specific promoter. By using short- and long-lived reporter proteins, we show that in triA(-) slugs the prestalk (pst)/psp proportion is normal, but that there is inappropriate transdifferentiation between the two cell types. During culmination, regardless of their current fate, all cells with a history of pst gene expression contribute to the stalk, which could account for the altered cell-type proportion in the mutant.     

The centrosomal component CEP161 of Dictyostelium discoideum interacts with the Hippo signaling pathway

CEP161 is a novel component of the Dictyostelium discoideum centrosome which was identified as binding partner of the pericentriolar component CP250. Here we show that the amino acids 1-763 of the 1381 amino acids CEP161 are sufficient for CP250 binding, centrosomal targeting and centrosome association. Analysis of AX2 cells over-expressing truncated and full length CEP161 proteins revealed defects in growth and development. By immunoprecipitation experiments we identified the Hippo related kinase SvkA (Hrk-svk) as binding partner for CEP161. Both proteins colocalize at the centrosome. In in vitro kinase assays the N-terminal domain of CEP161 (residues 1-763) inhibited the kinase activity of Hrk-svk. A comparison of D. discoideum Hippo kinase mutants with mutants overexpressing CEP161 polypeptides revealed similar defects. We propose that the centrosomal component CEP161 is a novel player in the Hippo signaling pathway and affects various cellular properties through this interaction.     

Cell migrations during morphogenesis: Some clues from the slug of Dictyostelium discoideum

Starvation induces free-living Dictyostelium discoideum amoebae to form slugs that typically contain 100,000 cells. Only recently have sufficient clues become available to suggest how coordinated cell actions might result in slug movement. We propose a “squeeze-pull” model that involves circumferential cells squeezing forward a cellular core, followed by pulling up of the rear. This model takes into account the different classes of cells in the slug; it is proposed that prestalk cells are engines and prespore cells are the cargo.     

Altered cyclic-AMP receptor activity and morphogenesis in a chemosensory mutant of Dictyostelium discoideum

The functional properties of the cell-surface cyclic-AMP receptor that controls chemotaxis were found to be altered in an aggregation mutant of Dictyostelium discoideum. The mutant aggregated without stream formation and had a tenfold increased cell-density requirement for the initiation of aggregation. After aggregation, mounds formed multiple tips and subsequently subdivided to give multiple fruits that were small and abnormally proportioned. Cyclic-AMP-induced light-scattering changes in cell suspensions indicated that the mutant had a diminished response to external cyclic-AMP signals. Associated with these altered functional responses was a physical change in the cyclic-AMP sensory system. Cyclic-AMP-binding studies showed that the parent had two classes of cyclic-AMP binding sites, i.e., Kd = 32 and 110 nM. In contrast, the mutant had two- to threefold or more high-affinity sites (Kd = 25 nM) and altered low-affinity sites (Kd less than 3 microM). These results indicate that both affinity classes of binding site are independently mutable. This observation suggests that the two affinity classes can be interconverted by mutation, or the mutation alters a single molecular species and its equilibrium between binding sites with different affinities for cyclic AMP, as postulated in receptor cycling models.     

The cell adhesion molecule DdCAD-1 regulates morphogenesis through differential spatiotemporal expression in Dictyostelium discoideum

During development of Dictyostelium, multiple cell types are formed and undergo a coordinated series of morphogenetic movements guided by their adhesive properties and other cellular factors. DdCAD-1 is a unique homophilic cell adhesion molecule encoded by the cadA gene. It is synthesized in the cytoplasm and transported to the plasma membrane by contractile vacuoles. In chimeras developed on soil plates, DdCAD-1-expressing cells showed greater propensity to develop into spores than did cadA-null cells. When development was performed on non-nutrient agar, wild-type cells sorted from the cadA-null cells and moved to the anterior zone. They differentiated mostly into stalk cells and eventually died, whereas the cadA-null cells survived as spores. To assess the role of DdCAD-1 in this novel behavior of wild-type and mutant cells, cadA-null cells were rescued by the ectopic expression of DdCAD-1-GFP. Morphological studies have revealed major spatiotemporal changes in the subcellular distribution of DdCAD-1 during development. Whereas DdCAD-1 became internalized in most cells in the post-aggregation stages, it was prominent in the contact regions of anterior cells. Cell sorting was also restored in cadA(-) slugs by exogenous recombinant DdCAD-1. Remarkably, DdCAD-1 remained on the surface of anterior cells, whereas it was internalized in the posterior cells. Additionally, DdCAD-1-expressing cells migrated slower than cadA(-) cells and sorted to the anterior region of chimeric slugs. These results show that DdCAD-1 influences the sorting behavior of cells in slugs by its differential distribution on the prestalk and prespore cells.     

Altered cyclic-AMP receptor activity and morphogenesis in a chemosensory mutant of Dictyostelium discoideum

Abstract. The functional properties of the cell-surface cyclic-AMP receptor that controls chemotaxis were found to be altered in an aggregation mutant of Dictyostelium discoideum. The mutant aggregated without stream formation and had a tenfold increased cell-density requirement for the initiation of aggregation. After aggregation, mounds formed multiple tips and subsequently subdivided to give multiple fruits that were small and abnormally proportioned. Cyclic-AMP-induced light-scattering changes in cell suspensions indicated that the mutant had a diminished response to external cyclic-AMP signals. Associated with these altered functional responses was a physical change in the cyclic-AMP sensory system. Cyclic-AMP-binding studies showed that the parent had two classes of cyclic-AMP binding sites, i.e., Kd = 32 and 110 nM. In contrast, the mutant had two- to threefold or more high-affinity sites (Kd = 25n M ) and altered low-affinity sites (Kd < 3μ M ). These results indicate that both affinity classes of binding site are independently mutable. This observation suggests that the two affinity classes can be interconverted by mutation, or the mutation alters a single molecular species and its equilibrium between binding sites with different affinities for cyclic AMP, as postulated in receptor cycling models.     

Specific photoaffinity labeling of the cAMP surface receptor in Dictyostelium discoideum

The recent observation that ammonium sulfate stabilizes cell-surface [3H]cyclic AMP binding in Dictyostelium discoideum (Van Haastert, P., and Kien, E. (1983) J. Biol. Chem. 258, 9636-9642) led us to attempt to identify the surface cAMP receptor by photoaffinity labeling with 8-azido-[32P]cAMP using this stabilization technique. 8-azido-[32P]cAMP specifically labeled a polypeptide which migrates as a closely spaced doublet (Mr = 40,000 to 43,000) on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Greater than 60% of the labeled polypeptide was found associated with membranes. This protein was distinguished from the cytosolic regulatory subunit of the cAMP-dependent protein kinase (Mr = 41,000) by differences in developmental regulation, specificity, and subcellular localization. No kinase regulatory subunit was detected in membranes by western blot analysis. Our preliminary observations show that labeling of this doublet correlates closely with cAMP-binding activity, suggesting that it is the surface receptor which mediates chemotaxis and cAMP signaling.     

4D confocal microscopy of Dictyostelium discoideum morphogenesis and its presentation on the Internet

 Methods to present three-dimensional (3D) and time series of 3D datasets (4D) are demonstrated using the recent advances in confocal microscopy and computer visualization. The process of cell sorting during tip formation in the slime mould Dictyostelium discoideum is examined as an example by in vivo confocal microscopy of spectrally different green fluorescent protein (GFP) variants as reporters of cell-type specific gene expression. Also, cell sorting of the co-aggregating slime mould species D. discoideum and D. mucoroides is observed using a GFP variant and a spectrally distinguishable fluorescent vital stain. The confocal data are handled as 3D and 4D datasets, their processing and the advantages of different methods of visualization are discussed step by step. Selected sequences of the experiments can be viewed on the Internet, giving a much better impression of the complex cellular movements during Dictyostelium morphogenesis than printed photographs. Received: 17 February 1998 / Accepted: 14 June 1998