Lignin Depletion Enhances the Digestibility of Cellulose in Cultured Xylem Cells

Plant lignocellulose constitutes an abundant and sustainable source of polysaccharides that can be converted into biofuels. However, the enzymatic digestion of native plant cell walls is inefficient, presenting a considerable barrier to cost-effective biofuel production. In addition to the insolubility of cellulose and hemicellulose, the tight association of lignin with these polysaccharides intensifies the problem of cell wall recalcitrance. To determine the extent to which lignin influences the enzymatic digestion of cellulose, specifically in secondary walls that contain the majority of cellulose and lignin in plants, we used a model system consisting of cultured xylem cells from Zinnia elegans . Rather than using purified cell wall substrates or plant tissue, we have applied this system to study cell wall degradation because it predominantly consists of homogeneous populations of single cells exhibiting large deposits of lignocellulose. We depleted lignin in these cells by treating with an oxidative chemical or by inhibiting lignin biosynthesis, and then examined the resulting cellulose digestibility and accessibility using a fluorescent cellulose-binding probe. Following cellulase digestion, we measured a significant decrease in relative cellulose content in lignin-depleted cells, whereas cells with intact lignin remained essentially unaltered. We also observed a significant increase in probe binding after lignin depletion, indicating that decreased lignin levels improve cellulose accessibility. These results indicate that lignin depletion considerably enhances the digestibility of cellulose in the cell wall by increasing the susceptibility of cellulose to enzymatic attack. Although other wall components are likely to contribute, our quantitative study exploits cultured Zinnia xylem cells to demonstrate the dominant influence of lignin on the enzymatic digestion of the cell wall. This system is simple enough for quantitative image analysis, but realistic enough to capture the natural complexity of lignocellulose in the plant cell wall. Consequently, these cells represent a suitable model for analyzing native lignocellulose degradation.     

Advanced biorefinery in lower termite-effect of combined pretreatment during the chewing process

Background

Currently the major barrier in biomass utilization is the lack of an effective pretreatment of plant cell wall so that the carbohydrates can subsequently be hydrolyzed into sugars for fermentation into fuel or chemical molecules. Termites are highly effective in degrading lignocellulosics and thus can be used as model biological systems for studying plant cell wall degradation.

Results

We discovered a combination of specific structural and compositional modification of the lignin framework and partial degradation of carbohydrates that occurs in softwood with physical chewing by the termite, Coptotermes formosanus, which are critical for efficient cell wall digestion. Comparative studies on the termite-chewed and native (control) softwood tissues at the same size were conducted with the aid of advanced analytical techniques such as pyrolysis gas chromatography mass spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy and thermogravimetry. The results strongly suggest a significant increase in the softwood cellulose enzymatic digestibility after termite chewing, accompanied with utilization of holocellulosic counterparts and an increase in the hydrolysable capacity of lignin collectively. In other words, the termite mechanical chewing process combines with specific biological pretreatment on the lignin counterpart in the plant cell wall, resulting in increased enzymatic cellulose digestibility in vitro. The specific lignin unlocking mechanism at this chewing stage comprises mainly of the cleavage of specific bonds from the lignin network and the modification and redistribution of functional groups in the resulting chewed plant tissue, which better expose the carbohydrate within the plant cell wall. Moreover, cleavage of the bond between the holocellulosic network and lignin molecule during the chewing process results in much better exposure of the biomass carbohydrate.

Conclusion

Collectively, these data indicate the participation of lignin-related enzyme(s) or polypeptide(s) and/or esterase(s), along with involvement of cellulases and hemicellulases in the chewing process of C. formosanus, resulting in an efficient pretreatment of biomass through a combination of mechanical and enzymatic processes. This pretreatment could be mimicked for industrial biomass conversion.     

Aromatic compound degradation by the wood-feeding termite Coptotermes formosanus (Shiraki)

Wood-feeding termites (WFT) have proven to be highly efficient for wood digestion. There is evidence to support the hypothesis that there are ligninolytic enzymes existing in the gut of WFT responsible for wood pretreatment toward cellulose utilization. Elucidating the mechanism of biomass pretreatment through lignin modification in termites will help to develop more efficient lignocellulosic biofuel production processes. The in-vivo degradation of aromatic compounds with different substructures, including dyes, lignin model monomers and dimers, and lignin sulfonate, by Coptotermes formosanus (Shiraki) was investigated. The degradation of aromatic compounds was determined using pyrolysis-gas chromatography/mass spectrometry. The results revealed that WFT were able to metabolize the conjugated aromatic structures and that the degradation efficiency is higher in the foregut and midgut regions than in the hindgut. This is the first time that evidence has been provided to show different aromatic compound degradation in the separate gut segments of a termite. This study provides information on the C. formosanus (Shiraki) lignin modification phenomenon, and it demonstrates that phenomenon’s potential in the breakdown of the plant cell wall. Understanding this lignin modification could contribute to technology that will supplant current harsh pretreatment protocols for plant cell walls and thereby better facilitate the conversion of cellulose and hemicellulose.     

不同碳源条件下广叶绣球菌转录组分析

【背景】广叶绣球菌(Sparassis latifolia)是一种名贵的食用菌,其木质纤维素降解的分子机制尚不明确。【目的】了解广叶绣球菌在不同碳源条件下木质纤维素降解相关基因表达动态。【方法】通过转录组测序技术对分别以葡萄糖、纤维素+木质素、纤维素及松木屑为碳源的广叶绣球菌基因表达谱进行分析。以葡萄糖为碳源的样本为对照,分别对不同碳源下广叶绣球菌显著差异表达的基因进行功能分析。【结果】Geneontology(Go)富集分析表明,以葡萄糖为碳源的样本为对照,差异表达基因主要富集在碳水化合物利用的过程,如多糖催化过程、碳水化合物催化过程、碳水化合物代谢过程及多糖代谢过程等。碳水化合物活性酶(Carbohydrate-activeenzymes,CAZymes)功能注释表明,碳源种类主要影响了半纤维素和纤维素降解相关糖苷水解酶家族基因的表达,其中涉及半纤维素降解的相关酶基因上调幅度最大。同时,在纤维素+木质素、松木屑为碳源的处理组中一些转录因子基因上调表达显著。【结论】不同碳源显著影响了广叶绣球菌基因表达谱,这种对碳源的适应也可能反映了广叶绣球菌攻击植物细胞壁的机制,研究结果为深入了解广叶绣球菌木质纤维素降解的分子机理和相关功能基因提供了一些参考。     

High‐level hemicellulosic arabinose predominately affects lignocellulose crystallinity for genetically enhancing both plant lodging resistance and biomass enzymatic digestibility in rice mutants

Rice is a major food crop with enormous biomass residue for biofuels. As plant cell wall recalcitrance basically decides a costly biomass process, genetic modification of plant cell walls has been regarded as a promising solution. However, due to structural complexity and functional diversity of plant cell walls, it becomes essential to identify the key factors of cell wall modifications that could not much alter plant growth, but cause an enhancement in biomass enzymatic digestibility. To address this issue, we performed systems biology analyses of a total of 36 distinct cell wall mutants of rice. As a result, cellulose crystallinity (CrI) was examined to be the key factor that negatively determines either the biomass enzymatic saccharification upon various chemical pretreatments or the plant lodging resistance, an integrated agronomic trait in plant growth and grain production. Notably, hemicellulosic arabinose (Ara) was detected to be the major factor that negatively affects cellulose CrI probably through its interlinking with β‐1,4‐glucans. In addition, lignin and G monomer also exhibited the positive impact on biomass digestion and lodging resistance. Further characterization of two elite mutants, Osfc17 and Osfc30, showing normal plant growth and high biomass enzymatic digestion in situ and in vitro, revealed the multiple GH9B candidate genes for reducing cellulose CrI and XAT genes for increasing hemicellulosic Ara level. Hence, the results have suggested the potential cell wall modifications for enhancing both biomass enzymatic digestibility and plant lodging resistance by synchronically overexpressing GH9B and XAT genes in rice.     

Inhibition of enzymatic cellulolysis by phenolic compounds

Phenolics derived from lignin and other plant components can pose significant inhibition on enzymatic conversion of cellulosic biomass materials to useful chemicals. Understanding the mechanism of such inhibition is of importance for the development of viable biomass conversion technologies. In native plant cell wall, most of the phenolics and derivatives are found in polymeric lignin. When biomass feedstocks are pretreated (prior to enzymatic hydrolysis), simple or oligomeric phenolics and derivatives are often generated from lignin modification/degradation, which can inhibit biomass-converting enzymes. To further understand how such phenolic substances may affect cellulase reaction, we carried out a comparative study on a series of simple and oligomeric phenolics representing or mimicking the composition of lignin or its degradation products. Consistent to previous studies, we observed that oligomeric phenolics could exert more inhibition on enzymatic cellulolysis than simple phenolics. Oligomeric phenolics could inactivate cellulases by reversibly complexing them. Simple and oligomeric phenolics could also inhibit enzymatic cellulolysis by adsorbing onto cellulose. Individual cellulases showed different susceptibility toward these inhibitions. Polyethylene glycol and tannase could respectively bind and degrade the studied oligomeric phenolics, and by doing so mitigate the oligomeric phenolic's inhibition on cellulolysis.     

Microplate-based high throughput screening procedure for the isolation of lipid-rich marine microalgae

Background

Termites are highly effective at degrading lignocelluloses, and thus can be used as a model for studying plant cell-wall degradation in biological systems. However, the process of lignin deconstruction and/or degradation in termites is still not well understood.

Methods

We investigated the associated structural modification caused by termites in the lignin biomolecular assembly in softwood tissues crucial for cell-wall degradation. We conducted comparative studies on the termite-digested (i.e. termite feces) and native (control) softwood tissues with the aid of advanced analytical techniques: ¹³C crosspolarization magic angle spinning and nuclear magnetic resonance (CP-MAS-NMR) spectroscopy, flash pyrolysis with gas chromatography mass spectrometry (Py-GC/MS), and Py-GC-MS in the presence of tetramethylammonium hydroxide (Py-TMAH)-GC/MS.

Results

The ¹³C CP/MAS NMR spectroscopic analysis revealed an increased level of guaiacyl-derived (G unit) polymeric framework in the termite-digested softwood (feces), while providing specific evidence of cellulose degradation. The Py-GC/MS data were in agreement with the ¹³C CP/MAS NMR spectroscopic studies, thus indicating dehydroxylation and modification of selective intermonomer side-chain linkages in the lignin in the termite feces. Moreover, Py-TMAH-GC/MS analysis showed significant differences in the product distribution between control and termite feces. This strongly suggests that the structural modification in lignin could be associated with the formation of additional condensed interunit linkages.

Conclusion

Collectively, these data further establish: 1) that the major β-O-4' (β-aryl ether) was conserved, albeit with substructure degeneracy, and 2) that the nature of the resulting polymer in termite feces retained most of its original aromatic moieties (G unit-derived). Overall, these results provide insight into lignin-unlocking mechanisms for understanding plant cell-wall deconstruction, which could be useful in development of new enzymatic pretreatment processes mimicking the termite system for biochemical conversion of lignocellulosic biomass to fuels and chemicals.     

In situ FT-IR microscopic study on enzymatic treatment of poplar wood cross-sections

The feasibility of Fourier transform infrared (FT-IR) microscopy to monitor in situ the enzymatic degradation of wood was investigated. Cross-sections of poplar wood were treated with cellulase Onozuka RS within a custom-built fluidic cell. Light-optical micrographs and FT-IR spectra were acquired in situ from normal and tension wood fibers. Light-optical micrographs showed almost complete removal of the gelatinous (G) layer in tension wood. No structural and spectral changes were observed in the lignified cell walls. The accessibility of cellulose within the lignified cell wall was found to be the main limiting factor, whereas the depletion of the enzyme due to lignin adsorption could be ruled out. The fast, selective hydrolysis of the crystalline cellulose in the G-layer, even at room temperature, might be explained by the gel-like structure and the highly porous surface. Young plantation grown hardwood trees with a high proportion of G-fibers thus represent an interesting resource for bioconversion to fermentable sugars in the process to bioethanol.     

Lignin modification <Emphasis Type="Italic">in planta</Emphasis> for valorization

Lignocellulose polysaccharides are encrusted by lignin, which has long been considered an obstacle for efficient use of polysaccharides during processes such as pulping and bioethanol fermentation. Hence, numerous transgenic plant lines with reduced lignin contents have been generated, leading to more efficient enzymatic saccharification and forage digestion. However, lignin is also a potential feedstock for aromatic products and an important direct-combustion fuel, or a by-product fuel in polysaccharide utilization such as pulping and bioethanol production. For aromatic feedstock production, the complicated structure of lignin along with its occlusion within polysaccharide matrices makes lignin utilization intractable. To alleviate these difficulties, simplification of the lignin structure is an important breeding objective for future high-value utilization of lignin. In addition, higher lignin contents are beneficial for increasing heating values of lignocellulose, because lignin has much larger heating values than polysaccharides, cellulose and hemicelluloses. Structural modification of lignin may also be effective in increasing heating values of lignocellulose biomass, because the heating value of p-hydroxyphenyl lignin is highest, followed by those of guaiacyl lignin and of syringyl lignin in this order. Herein, recent developments for augmenting lignin contents and for lignin structural modifications, to improve its utilization by metabolic engineering, are outlined.     

Comprehensive Compositional Analysis of Plant Cell Walls (Lignocellulosic biomass) Part I: Lignin

The need for renewable, carbon neutral, and sustainable raw materials for industry and society has become one of the most pressing issues for the 21st century. This has rekindled interest in the use of plant products as industrial raw materials for the production of liquid fuels for transportation¹ and other products such as biocomposite materials⁷. Plant biomass remains one of the greatest untapped reserves on the planet⁴. It is mostly comprised of cell walls that are composed of energy rich polymers including cellulose, various hemicelluloses (matrix polysaccharides, and the polyphenol lignin⁶ and thus sometimes termed lignocellulosics. However, plant cell walls have evolved to be recalcitrant to degradation as walls provide tensile strength to cells and the entire plants, ward off pathogens, and allow water to be transported throughout the plant; in the case of trees up to more the 100 m above ground level. Due to the various functions of walls, there is an immense structural diversity within the walls of different plant species and cell types within a single plant⁴. Hence, depending of what crop species, crop variety, or plant tissue is used for a biorefinery, the processing steps for depolymerization by chemical/enzymatic processes and subsequent fermentation of the various sugars to liquid biofuels need to be adjusted and optimized. This fact underpins the need for a thorough characterization of plant biomass feedstocks. Here we describe a comprehensive analytical methodology that enables the determination of the composition of lignocellulosics and is amenable to a medium to high-throughput analysis. In this first part we focus on the analysis of the polyphenol lignin (Figure 1). The method starts of with preparing destarched cell wall material. The resulting lignocellulosics are then split up to determine its lignin content by acetylbromide solubilization³, and its lignin composition in terms of its syringyl, guaiacyl- and p-hydroxyphenyl units⁵. The protocol for analyzing the carbohydrates in lignocellulosic biomass including cellulose content and matrix polysaccharide composition is discussed in Part II².     

Distribution of lignin and its coniferyl alcohol and coniferyl aldehyde groups in Picea abies and Pinus sylvestris as observed by Raman imaging

Wood cell wall consists of several structural components, such as cellulose, hemicelluloses and lignin, whose concentrations vary throughout the cell wall. It is a composite where semicrystalline cellulose fibrils, acting as reinforcement, are bound together by amorphous hemicelluloses and lignin matrix. Understanding the distribution of these components and their functions within the cell wall can provide useful information on the biosynthesis of trees. Raman imaging enables us to study chemistry of cell wall without altering the structure by staining the sample or fractionating it. Raman imaging has been used to analyze distributions of lignin and cellulose, as well as the functional groups of lignin in wood. In our study, we observed the distribution of cellulose and lignin, as well as the amount of coniferyl alcohol and aldehyde groups compared to the total amount of lignin in pine (Pinus sylvestris) and spruce (Picea abies) wood samples. No significant differences could be seen in lignin and cellulose distribution between these samples, while clear distinction was observed in the distribution of coniferyl alcohols and coniferyl aldehyde in them. These results could provide valuable insight on how two similar wood species control biosynthesis of lignin differently during the differentiation of cell wall.     

Lignocellulosic biomass: Biosynthesis,degradation, and industrial utilization

Lignocellulose biomass derived from plant cell walls is a rich source of biopolymers, chemicals, and sugars, besides being a sustainable alternative to petrochemicals. A natural armor protecting living protoplasts, the cell wall is currently the target of intense study because of its crucial importance in plant development, morphogenesis, and resistance to (a)biotic stresses. Beyond the intrinsic relevance related to the overall plant physiology, plant cell walls constitute an exquisite example of a natural composite material that is a constant source of inspiration for biotechnology, biofuel, and biomaterial industries. The aim of the present review is to provide the reader with an overview of the current knowledge concerning lignocellulosic biomass synthesis and degradation, by focusing on its three principal constituents, i.e. cellulose, hemicellulose (in particular xylan), and lignin. Furthermore, the current industrial exploitation of lignocellulose from fast growing fibre crops (such as hemp) is highlighted. We conclude this review by suggesting approaches for further research to fill gaps in our current knowledge and to highlight the potential of biotechnology and bioengineering in improving both biomass biosynthesis and degradation.     

Biodegradation of kraft lignin by a newly isolated bacterial strain, <Emphasis Type="Italic">Aneurinibacillus aneurinilyticus</Emphasis> from the sludge of a pulp paper mill

A kraft lignin-degrading bacterium (ITRC S ₇ ) was isolated from sludge of pulp and paper mill and characterized as Aneurinibacillus aneurinilyticus by biochemical tests and 16SrRNA gene sequencing. The bacterium did not utilize kraft lignin (KL) as the sole source of carbon and energy. However, this strain reduced the color (58%) and lignin content (43%) from kraft lignin-mineral salt medium when supplemented with glucose at pH 7.6 and 30°C after 6 days. The degradation on addition of glucose in culture medium is clear evidence of co-metabolism of KL by A. aneurinilyticus. The analysis of lignin degradation products by GC-MS in ethyl acetate extract from an A. aneurinilyticus-inoculated sample revealed the formation of low molecular weight aromatic compounds such as guaiacol, acetoguaiacone, gallic acid and ferulic acid, indicating that the bacterium can oxidize of the sinapylic (G units) and coniferylic (S units) alcohol units which are the basic moieties that build the hardwood lignin structure. The low molecular weight aromatic compounds identified in extracts of the inoculated sample favors the idea of biochemical modification of the KL to a single aromatic unit.     

Solution-state 2D NMR of Ball-milled Plant Cell Wall Gels in DMSO-d 6

Although finely divided ball-milled whole cell walls do not completely dissolve in dimethylsulfoxide (DMSO), they readily swell producing a gel. Solution-state two-dimensional (2D) nuclear magnetic resonance (NMR) of this gel, produced directly in the NMR tube, provides an interpretable structural fingerprint of the polysaccharide and lignin components of the wall without actual solubilization, and without structural modification beyond that inflicted by the ball milling and ultrasonication steps. Since the cellulose is highly crystalline and difficult to swell, the component may be under-represented in the spectra. The method however provides a more rapid method for comparative structural evaluation of plant cell walls than is currently available. With the new potential for chemometric analysis using the 2D NMR fingerprint, this method may find application as a secondary screen for selecting biomass lines and for optimizing biomass processing and conversion efficiencies.     

Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose,Lignin, and a Synthetic Polycation

Woody materials are comprised of plant cell walls that contain a layered secondary cell wall composed of structural polymers of polysaccharides and lignin. Layer-by-layer (LbL) assembly process which relies on the assembly of oppositely charged molecules from aqueous solutions was used to build a freestanding composite film of isolated wood polymers of lignin and oxidized nanofibril cellulose (NFC). To facilitate the assembly of these negatively charged polymers, a positively charged polyelectrolyte, poly(diallyldimethylammomium chloride) (PDDA), was used as a linking layer to create this simplified model cell wall. The layered adsorption process was studied quantitatively using quartz crystal microbalance with dissipation monitoring (QCM-D) and ellipsometry. The results showed that layer mass/thickness per adsorbed layer increased as a function of total number of layers. The surface coverage of the adsorbed layers was studied with atomic force microscopy (AFM). Complete coverage of the surface with lignin in all the deposition cycles was found for the system, however, surface coverage by NFC increased with the number of layers. The adsorption process was carried out for 250 cycles (500 bilayers) on a cellulose acetate (CA) substrate. Transparent free-standing LBL assembled nanocomposite films were obtained when the CA substrate was later dissolved in acetone. Scanning electron microscopy (SEM) of the fractured cross-sections showed a lamellar structure, and the thickness per adsorption cycle (PDDA-Lignin-PDDA-NC) was estimated to be 17 nm for two different lignin types used in the study. The data indicates a film with highly controlled architecture where nanocellulose and lignin are spatially deposited on the nanoscale (a polymer-polymer nanocomposites), similar to what is observed in the native cell wall.     

Biomass Enzymatic Saccharification Is Determined by the Non-KOH-Extractable Wall Polymer Features That Predominately Affect Cellulose Crystallinity in Corn

Corn is a major food crop with enormous biomass residues for biofuel production. Due to cell wall recalcitrance, it becomes essential to identify the key factors of lignocellulose on biomass saccharification. In this study, we examined total 40 corn accessions that displayed a diverse cell wall composition. Correlation analysis showed that cellulose and lignin levels negatively affected biomass digestibility after NaOH pretreatments at p<0.05 & 0.01, but hemicelluloses did not show any significant impact on hexoses yields. Comparative analysis of five standard pairs of corn samples indicated that cellulose and lignin should not be the major factors on biomass saccharification after pretreatments with NaOH and H₂SO₄ at three concentrations. Notably, despite that the non-KOH-extractable residues covered 12%–23% hemicelluloses and lignin of total biomass, their wall polymer features exhibited the predominant effects on biomass enzymatic hydrolysis including Ara substitution degree of xylan (reverse Xyl/Ara) and S/G ratio of lignin. Furthermore, the non-KOH-extractable polymer features could significantly affect lignocellulose crystallinity at p<0.05, leading to a high biomass digestibility. Hence, this study could suggest an optimal approach for genetic modification of plant cell walls in bioenergy corn.     

Screening Wood Decayed by White Rot Fungi for Preferential Lignin Degradation

A screening procedure in which scanning electron microscopy was used indicated that 26 white rot fungi selectively removed lignin from various coniferous and hardwood tree species. Delignified wood from field collections had distinct micromorphological characteristics that were easily differentiated from other types of decay. The middle lamella was degraded, and the cells were separated from one another. Secondary cell wall layers that remained had a fibrillar appearance. Chemical analyses of delignified wood indicated that the cells were composed primarily of cellulose. Only small percentages of lignin and hemicellulose were evident. Delignified wood was not uniformly distributed throughout the decayed wood samples. White-pocket and white-mottled areas of the various decayed wood examined contained delignified cells, but adjacent wood had a nonselective removal of lignin where all cell wall components had been degraded simultaneously. This investigation demonstrates that selective delignification among white rot fungi is more prevalent than previously realized and identifies a large number of fungi for use in studies of preferential lignin degradation.     

Ectopic lignification in primary cellulose-deficient cell walls of maize cell suspension cultures

Maize(Zea mays L.) suspension-cultured cells with up to 70% less cellulose were obtained by stepwise habituation to dichlobenil(DCB), a cellulose biosynthesis inhibitor. Cellulose de ficiency was accompanied by marked changes in cell wall matrix polysaccharides and phenolics as revealed by Fourier transform infrared(FTIR) spectroscopy.Cell wall compositional analysis indicated that the cellulosede ficient cell walls showed an enhancement of highly branched and cross-linked arabinoxylans, as well as an increased content in ferulic acid, diferulates and p-coumaric acid, and the presence of a polymer that stained positive for phloroglucinol. In accordance with this, cellulose-de ficient cell walls showed a fivefold increase in Klason-type lignin.Thioacidolysis/GC-MS analysis of cellulose-de ficient cell walls indicated the presence of a lignin-like polymer with a Syringyl/Guaiacyl ratio of 1.45, which differed from the sensu stricto stress-related lignin that arose in response to shortterm DCB-treatments. Gene expression analysis of these cells indicated an overexpression of genes specific for the biosynthesis of monolignol units of lignin. A study of stress signaling pathways revealed an overexpression of some of the jasmonate signaling pathway genes, which might trigger ectopic lignification in response to cell wall integrity disruptions. In summary, the structural plasticity of primary cell walls is proven, since a lignification process is possible in response to cellulose impoverishment.     

In situ label-free imaging of hemicellulose in plant cell walls using stimulated Raman scattering microscopy

Background

Plant hemicellulose (largely xylan) is an excellent feedstock for renewable energy production and second only to cellulose in abundance. Beyond a source of fermentable sugars, xylan constitutes a critical polymer in the plant cell wall, where its precise role in wall assembly, maturation, and deconstruction remains primarily hypothetical. Effective detection of xylan, particularly by in situ imaging of xylan in the presence of other biopolymers, would provide critical information for tackling the challenges of understanding the assembly and enhancing the liberation of xylan from plant materials.

Results

Raman-based imaging techniques, especially the highly sensitive stimulated Raman scattering (SRS) microscopy, have proven to be valuable tools for label-free imaging. However, due to the complex nature of plant materials, especially those same chemical groups shared between xylan and cellulose, the utility of specific Raman vibrational modes that are unique to xylan have been debated. Here, we report a novel approach based on combining spectroscopic analysis and chemical/enzymatic xylan removal from corn stover cell walls, to make progress in meeting this analytical challenge. We have identified several Raman peaks associated with xylan content in cell walls for label-free in situ imaging xylan in plant cell wall.

Conclusion

We demonstrated that xylan can be resolved from cellulose and lignin in situ using enzymatic digestion and label-free SRS microscopy in both 2D and 3D. We believe that this novel approach can be used to map xylan in plant cell walls and that this ability will enhance our understanding of the role played by xylan in cell wall biosynthesis and deconstruction.