Fermentative lactic acid production with a metabolically engineered yeast immobilized in photo-crosslinkable resins

In this study, the immobilization technique involving photo-crosslinkable resin gels was used for lactic acid production. Saccharomyces cerevisiae OC-2T T165R, a metabolically engineered yeast that produces optically pure l(+)-lactic acid, was immobilized in hydrophilic photo-crosslinked resin gels as a biocatalyst. Three resin gels, TEP 1, TEP 2 and TEP 3, were examined and all of them showed high performance as to lactic acid production. Resin gel TEP 1, which exhibited the highest productivity among the resin gels was used for 15 consecutive batch fermentations without decreases in productivity and mechanical deformation, indicating that it was a suitable carrier for long-term lactic acid fermentation. Moreover, the use of the immobilization technique can improve the productivity of the metabolically engineered yeast in the fermentation with or without extraction, showing promise for using the immobilized engineered yeast for lactic acid production.     

Quantitation of oligosaccharides released by the β-elimination reaction

A quantitative micromethod has been described for monitoring the rate and extent of the β-elimination reaction as applied to O-glycosyl-glycoproteins utilizing alkaline tritiated borohydride. The procedure simultaneously labels the released oligosaccharides by their reduction to the corresponding tritiated alditols. The alkaline tritiated borohydride treatment also results in the labeling of the protein moiety of the glycoprotein and this can be quantitatively separated from the carbohydrate moiety on a cation exchange resin; the carbohydrate moiety is not adsorbed, while the protein moiety is adsorbed and then eluted with HCl. The radioactivity in the aqueous eluate of the resin is therefore a direct measure of the amount of oligosaccharides released by the β-elimination reaction. The sensitivity of the method is dependent on the specific activity of the tritiated sodium borohydride used. The stoichiometry of the reaction has been established by the use of N-acetylgalactosaminyl-O-glycoproteins, demonstrating that at the completion of the β-elimination reaction: (a) none of the radioactivity attributable to the protein moiety contaminates the carbohydrate moiety, (b) all the carbohydrate components of the glycoprotein are found in the aqueous eluate from the cationic exchange resin, (c) all the radioactivity in this aqueous eluate is associated with the sugar known to be at the reducing end of the oligosaccharide chain bound to serine or threonine of the glycoprotein (in the examples discussed, N-acetylgalactosamine), and (d) there is no additional hydrolysis of the oligosaccharide chains during the processing.     

In situ RNA hybridization using Technovit resin in Arabidopsis thaliana

A protocol is described for RNA in situ hybridization using thin sections prepared by Technovit resin. Technovit is a widely used resin for histological examinations. Since it does not require time-consuming processes such as removal of the resin and can be performed without high temperature treatment, a high resolution of sections could be possible compared to other resins and paraffin. Thin sections (approximately 4 m) were made from inflorescences of Arabidopsis thaliana embedded in Technovit 8100 resin, and in situ hybridization was performed using the protocol described in this article. Hybridization signals were observed using LEAFY and other genes as probes, showing that this resin can be used for in situ analysis. In our experiments, the most important factor for a successful in situ hybridization pattern was to optimize the RNase A concentration after hybridization. We routinely used RNase A at a concentration of 2–5 ng/ml, a concentration much lower than that used for paraffin embedding method. Thus, the use of the Technovit resin for plant tissue embedding results in a faster protocol and greater quality than allowed by paraffin sections.     

Metabolomics Reveals the Origins of Antimicrobial Plant Resins Collected by Honey Bees

The deposition of antimicrobial plant resins in honey bee, Apis mellifera, nests has important physiological benefits. Resin foraging is difficult to approach experimentally because resin composition is highly variable among and between plant families, the environmental and plant-genotypic effects on resins are unknown, and resin foragers are relatively rare and often forage in unobservable tree canopies. Subsequently, little is known about the botanical origins of resins in many regions or the benefits of specific resins to bees. We used metabolomic methods as a type of environmental forensics to track individual resin forager behavior through comparisons of global resin metabolite patterns. The resin from the corbiculae of a single bee was sufficient to identify that resin''s botanical source without prior knowledge of resin composition. Bees from our apiary discriminately foraged for resin from eastern cottonwood (Populus deltoides), and balsam poplar (P. balsamifera) among many available, even closely related, resinous plants. Cottonwood and balsam poplar resin composition did not show significant seasonal or regional changes in composition. Metabolomic analysis of resin from 6 North American Populus spp. and 5 hybrids revealed peaks characteristic to taxonomic nodes within Populus, while antimicrobial analysis revealed that resin from different species varied in inhibition of the bee bacterial pathogen, Paenibacillus larvae. We conclude that honey bees make discrete choices among many resinous plant species, even among closely related species. Bees also maintained fidelity to a single source during a foraging trip. Furthermore, the differential inhibition of P. larvae by Populus spp., thought to be preferential for resin collection in temperate regions, suggests that resins from closely related plant species many have different benefits to bees.     

Development of a micelle-fractional precipitation hybrid process for the pre-purification of paclitaxel from plant cell cultures

A micelle-fractional precipitation hybrid process was developed for the effective pre-purification of the anticancer agent paclitaxel extracted from plant cell cultures. First, it was found that the efficiency of such a developed process could be remarkably enhanced by removing waxy substances originating from plant cells using the adsorbent sylopute. Paclitaxel yield was improved and the fractional precipitation time was shortened by increasing the surface area per working volume (S/V) of the reacting solution through the addition of a cation exchange resin (Amberlite IR120 or Amberlite 200), an anion exchange resin (Amberlite IRA400 or Amberlite IRA96), or glass beads. Most of the paclitaxel (>98%) could be obtained after about 12 h of fractional precipitation using Amberlite 200. Purity increased with increasing fractional precipitation time up to 9 h to about 85%, after which it showed little change. On the other hand, no paclitaxel precipitate was formed using either of the nonionic exchange resins because paclitaxel, which is hydrophobic, was strongly adsorbed on the hydrophobic resin surface. Since high-purity paclitaxel can be obtained in high yield and the precipitation time can be reduced by combining micelle formation with fractional precipitation, this hybrid method is expected to significantly enhance the final purification process.     

Effects of Mechanical and Chemical Pretreatments of Zirconia or Fiber Posts on Resin Cement Bonding

The bonding strength between resin cement and posts is important for post and core restorations. An important method of improving the bonding strength is the use of various surface pretreatments of the post. In this study, the surfaces of zirconia (fiber) posts were treated by mechanical and/or chemical methods such as sandblasting and silanization. The bonding strength between the zirconia (fiber) post and the resin cement was measured by a push-out method after thermocycling based on the adhesion to Panavia F 2.0 resin cement. The zirconia and fiber posts exhibited different bonding strengths after sandblasting and/or silanization because of the different strengths and chemical structures. The zirconia post showed a high bonding strength of up to 17.1 MPa after a combined treatment of sandblasting and silanization because of the rough surface and covalent bonds at the interface. This effect was also enhanced by using 1,2-bis(trimethoxysilyl)ethane for the formation of a flexible layer at the interface. In contrast, a high bonding strength of 13.9 MPa was obtained for the fiber post treated by silane agents because the sandblasting treatment resulted in damage to the fiber post, as observed by scanning electron microscopy. The results indicated that the improvement in the bonding strength between the post and the resin cement could be controlled by different chemical and/or mechanical treatments. Enhanced bonding strength depended on covalent bonding and the surface roughness. A zirconia post with high bonding strength could potentially be used for the restoration of teeth in the future.     

Improvement of the biocatalytic properties of one phenylacetone monooxygenase mutant in hydrophilic organic solvents

The presence of different hydrophilic organic solvents or a water soluble polymer such as PEG 4000 led to an enhancement in the enzymatic activity of the M446G mutant of phenylacetone monooxygenase when it is employed in enantioselective sulfoxidations and Baeyer-Villiger reactions. By solvent engineering new substrates were found to be effectively converted by this Baeyer-Villiger monooxygenase. The use of 5% methanol together with the weak anion exchange resin Lewatit MP62 also allows the dynamic kinetic resolution of a set of racemic benzylketones. By this approach (S)-benzylesters could be obtained with high yields and optical purities.     

Genotoxicity assessment of Copaiba oil and its fractions in Swiss mice

Copaiba oil-resin, extracted from the trunk of Copaifera, and traditionally used in folk medicine in the treatment of various disorders, has been shown to be an effective antiinflamatory, antitumor, antitetanus, antiseptic and anti-blenorrhagea agent. As, there are few studies evaluating its genotoxicity, this aspect of the commercial oil-resin, and its volatile and resinous fractions, were evaluated in mice by comet assay and micronucleus (MN) test. A single dose of oil resin, volatile or resin fractions (500; 1,000 or 2,000 mg/kg b.w.) was administered by gavage. The chemical compositions of Copaiba oil resin and its fractions was analyzed by gas chromatography. According to comet assaying, treatment with either one did not increase DNA damage, and as to MN testing, there was no alteration in the incidence of micronucleated polychromatic erythrocytes. Chromatographic analysis of the oil-resin itself revealed sesquiterpenes, diterpenic carboxylic acid methyl esters and high levels of β-caryophyllene. Thus, it can be assumed that the oil resin and volatile and resinous fractions from the commercial product are not genotoxic or mutagenic.     

Extraction of High Quality DNA from Seized Moroccan Cannabis Resin (Hashish)

The extraction and purification of nucleic acids is the first step in most molecular biology analysis techniques. The objective of this work is to obtain highly purified nucleic acids derived from Cannabis sativa resin seizure in order to conduct a DNA typing method for the individualization of cannabis resin samples. To obtain highly purified nucleic acids from cannabis resin (Hashish) free from contaminants that cause inhibition of PCR reaction, we have tested two protocols: the CTAB protocol of Wagner and a CTAB protocol described by Somma (2004) adapted for difficult matrix. We obtained high quality genomic DNA from 8 cannabis resin seizures using the adapted protocol. DNA extracted by the Wagner CTAB protocol failed to give polymerase chain reaction (PCR) amplification of tetrahydrocannabinolic acid (THCA) synthase coding gene. However, the extracted DNA by the second protocol permits amplification of THCA synthase coding gene using different sets of primers as assessed by PCR. We describe here for the first time the possibility of DNA extraction from (Hashish) resin derived from Cannabis sativa. This allows the use of DNA molecular tests under special forensic circumstances.     

Immunofluorescence localization of levopimaradiene/abietadiene synthase in methyl jasmonate treated stems of Sitka spruce (Picea sitchensis) shows activation of diterpenoid biosynthesis in cortical and developing traumatic resin ducts

Conifers produce terpenoid-rich oleoresin in specialized resin ducts as a main line of defence against pests and pathogens. In spruce species (Picea spp.), axial resin ducts are either present constitutively in the cortex tissue (cortical resin ducts, CRDs) or are formed de novo as traumatic resin ducts (TRDs) in the cambial zone upon attack by insects, fungi or treatment with methyl jasmonate (MeJA). Using immunofluorescence localization we tested if previously formed CRDs respond to MeJA treatment with increased capacity for diterpenoid biosynthesis. We also tested the dynamics of diterpene synthase localization in the cambial zone. Immunofluorescence localization was performed using an antibody against a diterpene synthase, levopimaradiene/abietadiene synthase (LAS), in stem cross-sections of untreated and 0.1% MeJA-treated 4-year old Sitka spruce (P. sitchensis) trees. No fluorescence signal was observed in untreated stem cross-sections; however, signal was present 2 days after treatment with MeJA exclusively in the epithelial cells of CRDs. Fluorescence steadily increased in the CRD epithelial cells 4 and 8 days after treatment. At 8 days, additional fluorescence was observed in developing epithelial cells of traumatic resin ducts TRDs in the cambial zone. These results confirm that resin duct epithelial cells are the main site of diterpene biosynthesis in Sitka spruce, diterpenoid biosynthesis is induced in CRD epithelial cells early upon treatment with MeJA, and immature developing TRD epithelial cells produce diterpene synthase enzyme. Overall, the results of this work improve our understanding of spatial and temporal patterns of induced diterpene resin acid biosynthesis in conifers.     

The propolis of stingless bees: terpenes from the tibia of three Frieseomelitta species

The posterior tibia of foraging workers of three species of Frieseomelitta (Hymenoptera: Meliponinae) stingless bees have been shown to carry complex mixtures of plant-derived mono-, sesqui-, di- and tri-terpenes. These subtances were not found on the fore- or mid-legs, nor on other parts of the hind legs. F. silvestrii and F. silvestrii languida, when collecting, appear to exploit different plants for their resin even when housed in the same area. F. varia were found to be not collecting resin at the time of the initial sampling and were therefore sampled later. Mature foragers carry the resin. In the samples studied here, particularly prominent were the monoterpene α-pinene, the sesquiterpenes β-caryophyllene, α-cubebene, α- and γ-muurolene, γ-cadinene, germacrene-D, and elemol and the diterpenes manool and totarol The collected material is used for the resin placed around the entrance to their nests and is also mixed with wax, to produce the cerum used for the structures in the nest.     

Characteristics of Zymomonas mobilis immobilized by photo-crosslinkable resin in ethanol fermentation

Zymomonas mobilis, an ethanol-producing bacterium, was immobilized in hydrophilic photo-crosslinked resin gels to form a biocatalyst. The molecular structure of the photo-crosslinkable resin could be modulated so as to minimize a disadvantage of this bacterium—poor-tolerance to salts in molasses. Characteristics of Z. mobilis immobilized by photo-crosslinkable resin gel, such as fermentability, cell growth in gel, the potential of gel materials, diffusion of materials, and salt distribution are discussed. ENTG-3800 photo-crosslinkable resin was selected as the most suitable entrapping material for Z. mobilis, especially in using molasses.     

High-performance liquid chromatography of N,O-acylated sialic acids

A rapid, isocratic high-performance liquid chromatographic method for the analysis of N-acetylneuraminic acid, N-glycolylneuraminic acid, and their O-acetylated derivatives is described. Separation of sialic acids and of other monosaccharides as sugar-borate complexes is achieved on an anion-exchange resin. The sialic acids elute as individual peaks after the other sugars tested. The method allows quantitative determination, for example, of amounts of N-acetylneuraminic acid as small as 10 nmol. On cation-exchange resin sialic acids cannot be differentiated, but can be separated from neutral and amino sugars, allowing the determination of as little as 3 nmol of total sialic acids.     

Kinetics of lipase recovery from the aqueous phase of biodiesel production by macroporous resin adsorption and reuse of the adsorbed lipase for biodiesel preparation

A commercial macroporous resin (D3520) was screened for lipase recovery by adsorption from the aqueous phase of biodiesel production. The influences of several factors on the adsorption kinetics were investigated. It was found that the kinetic behavior of lipase adsorption by macroporous resin could be well described by pseudo-first-order model. Temperature had no significant effects on lipase adsorption, while resin-to-protein ratio (R) significantly affected both rate constant (k₁) and equilibrium adsorption capacity (Q_e). No lipase was adsorbed when mixing (shaking) was not performed; however, protein recovery reached 98% after the adsorption was conducted at 200 rpm for 5 h in a shaker. The presence of methanol and glycerol showed significant negative influence on lipase adsorption kinetics. Particularly, increasing glycerol concentration could dramatically decrease k₁ but not impact Q_e. Biodiesel was found to dramatically decrease Q_e even present at a concentration as low as 0.02%, while k₁ was found to increase with biodiesel concentration. The adsorbed lipase showed a relatively stable catalytic activity in tert-butanol system, but poor stability in solvent-free system when used for biodiesel preparation. Oil and biodiesel were also found to adsorb onto resin during transesterification in solvent-free system. Therefore, the resin had to be washed by anhydrous methanol before re-used for lipase recovery.     

Bioengineering of Bacteria To Assemble Custom-Made Polyester Affinity Resins

Proof of concept for the in vivo bacterial production of a polyester resin displaying various customizable affinity protein binding domains is provided. This was achieved by engineering various protein binding domains into a bacterial polyester-synthesizing enzyme. Affinity binding domains based on various structural folds and derived from molecular libraries were used to demonstrate the potential of this technique. Designed ankyrin repeat proteins (DARPins), engineered OB-fold domains (OBodies), and V_HH domains from camelid antibodies (nanobodies) were employed. The respective resins were produced in a single bacterial fermentation step, and a simple purification protocol was developed. Purified resins were suitable for most lab-scale affinity chromatography purposes. All of the affinity domains tested produced polyester beads with specific affinity for the target protein. The binding capacity of these affinity resins ranged from 90 to 600 nmol of protein per wet gram of polyester affinity resin, enabling purification of a recombinant protein target from a complex bacterial cell lysate up to a purity level of 96% in one step. The polyester resin was efficiently produced by conventional lab-scale shake flask fermentation, resulting in bacteria accumulating up to 55% of their cellular dry weight as polyester. A further proof of concept demonstrating the practicality of this technique was obtained through the intracellular coproduction of a specific affinity resin and its target. This enables in vivo binding and purification of the coproduced “target protein.” Overall, this study provides evidence for the use of molecular engineering of polyester synthases toward the microbial production of specific bioseparation resins implementing previously selected binding domains.     

Terpene composition of Pinus pinaster seedlings and plants

-The production of essential oils in Pinus pinaster increases with the age of the seedlings, being higher in plants grown under continuous illumination. In the seedlings, nearly all the terpene is α- and β-pinene, the relative proportions of which are completely reversed between the 6th and 10th days of growth, regardless of the illumination period. Another reversion takes place after 60–65 days, the proportion found in the adult pine being very constant with α-pinene as the main component. The amount of oil in seedlings from high resin yielding parent trees was 4-fold higher than that in seedlings of normal (wild type) seeds. This finding is interesting because it can be employed for the preselection at the early stage of seedling of seeds to be used in forestry to obtain plantations of a high resin yield.     

In Vitro Antibacterial Activity of a Novel Resin-Based Pulp Capping Material Containing the Quaternary Ammonium Salt MAE-DB and Portland Cement

Background

Vital pulp preservation in the treatment of deep caries is challenging due to bacterial infection. The objectives of this study were to synthesize a novel, light-cured composite material containing bioactive calcium-silicate (Portland cement, PC) and the antimicrobial quaternary ammonium salt monomer 2-methacryloxylethyl dodecyl methyl ammonium bromide (MAE-DB) and to evaluate its effects on Streptococcus mutans growth in vitro.

Methods

The experimental material was prepared from a 2∶1 ratio of PC mixed with a resin of 2-hydroxyethylmethacrylate, bisphenol glycerolate dimethacrylate, and triethylene glycol dimethacrylate (4∶3∶1) containing 5 wt% MAE-DB. Cured resin containing 5% MAE-DB without PC served as the positive control material, and resin without MAE-DB or PC served as the negative control material. Mineral trioxide aggregate (MTA) and calcium hydroxide (Dycal) served as commercial controls. S. mutans biofilm formation on material surfaces and growth in the culture medium were tested according to colony-forming units (CFUs) and metabolic activity after 24 h incubation over freshly prepared samples or samples aged in water for 6 months. Biofilm formation was also assessed by Live/Dead staining and scanning electron microscopy.

Results

S. mutans biofilm formation on the experimental material was significantly inhibited, with CFU counts, metabolic activity, viability staining, and morphology similar to those of biofilms on the positive control material. None of the materials affected bacterial growth in solution. Contact-inhibition of biofilm formation was retained by the aged experimental material. Significant biofilm formation was observed on MTA and Dycal.

Conclusion

The synthesized material containing HEMA-BisGMA-TEGDMA resin with MAE-DB as the antimicrobial agent and PC to support mineralized tissue formation inhibited S. mutans biofilm formation even after aging in water for 6 months, but had no inhibitory effect on bacteria in solution. Therefore, this material shows promise as a pulp capping material for vital pulp preservation in the treatment of deep caries.     

The occurrence of vertical resin canals in Keteleeria, with reference to its systematic position in Pinaceae

The variation in the number of resin canals in the secondary xylem of Keteleeria fortunei (A. Murray bis) Carrière is determined. At all levels from base to top of a tree, resin canals are absent rearer the pith, but they (sporadically) appear after a certain cambial age. In addition, the occurrence of resin canals in seven named species of Keteleeria was surveyed. It was confirmed that normal vertical resin canals do occur in the mature parts of secondary xylem, but that they may be absent in the juvenile parts of secondary xylem of stems, as well as in branches and in seedlings or saplings. Earlier investigations reporting the absence of resin canals altogether in this genus may have been misled by the use of younger (immature) specimens instead of mature stems of trees. The distribution pattern of resin canals found in Keteleeria is systematically significant because it supports a new system of classification of Pinaceae, in which Keteleeria is believed to have a close relationship with Nothotsuga.     

Apparent Contradiction: Psychrotolerant Bacteria from Hydrocarbon-Contaminated Arctic Tundra Soils That Degrade Diterpenoids Synthesized by Trees

Resin acids are tricyclic terpenoids occurring naturally in trees. We investigated the occurrence of resin acid-degrading bacteria on the Arctic tundra near the northern coast of Ellesmere Island (82°N, 62°W). According to most-probable-number assays, resin acid degraders were abundant (10³ to 10⁴ propagules/g of soil) in hydrocarbon-contaminated soils, but they were undetectable (<3 propagules/g of soil) in pristine soils from the nearby tundra. Plate counts indicated that the contaminated and the pristine soils had similar populations of heterotrophs (10⁶ to 10⁷ propagules/g of soil). Eleven resin acid-degrading bacteria belonging to four phylogenetically distinct groups were enriched and isolated from the contaminated soils, and representative isolates of each group were further characterized. Strains DhA-91, IpA-92, and IpA-93 are members of the genus Pseudomonas. Strain DhA-95 is a member of the genus Sphingomonas. All four strains are psychrotolerant, with growth temperature ranges of 4°C to 30°C (DhA-91 and DhA-95) or 4°C to 22°C (IpA-92 and IpA-93) and with optimum temperatures of 15 to 22°C. Strains DhA-91 and DhA-95 grew on the abietanes, dehydroabietic and abietic acids, but not on the pimaranes, isopimaric and pimaric acids. Strains IpA-92 and IpA-93 grew on the pimaranes but not the abietanes. All four strains grew on either aliphatic or aromatic hydrocarbons, which is unusual for described resin acid degraders. Eleven mesophilic resin acid degraders did not use hydrocarbons, with the exception of two Mycobacterium sp. strains that used aliphatic hydrocarbons. We conclude that hydrocarbon contamination in Arctic tundra soil indirectly selected for resin acid degraders, selecting for hydrocarbon degraders that coincidentally use resin acids. Psychrotolerant resin acid degraders are likely important in the global carbon cycle and may have applications in biotreatment of pulp and paper mill effluents.     

Properties of rat liver plasma membrane adenylate cyclase after chromatography on O-diethylaminoethyl-cellulose and agarose-hexane-GTP: Sensitivity of partially purified and purified enzyme to Lubrol-PX, 5′-guanylylimidodiphosphate,and glucagon

Partially purified rat liver plasma membranes were enriched to yield a more glucagon-sensitive membrane fraction which was solubilized with Lubrol-PX. The supernate obtained after centrifugation at 165,000g was subjected to O-diethylaminoethyl anion exchange chromatography. An adenylate cyclase fraction was eluted and purified further by chromatography on agarose-hexane-GTP. The enzyme adsorbed to the affinity resin and was eluted with 0.5 m Tris-HCl. The protein isolated by chromatography on the affinity resin was homogenous by conventional acrylamide gel electrophoresis; one band was observed in sodium dodecyl sulfate. The purified enzyme was free of nucleotide phosphohydrolases found in the parent solubilized membrane preparation. The anion exchange product was not sensitive to glucagon; Lubrol-PX and 5′-guanylylimidodiphosphate [Gpp(NH)p] decreased the activity of this fraction. In the presence of detergent or guanyl nucleotide, glucagon, at 10^?6m, increased enzyme activity by 30 and 21%, respectively, to a statistically significant degree, but not above basal levels. Adenylate cyclase was also purified by subjecting the 165,000g supernate directly to agarose-hexane-GTP; agarose-hexane-ATP or agarose-hexane was not effective. The affinity-derived material was associated with 85 nmol of Lubrol-PX/mg of protein. When calculated on the basis of a molecular weight of 150,000 for detergent-free protein after gel filtration on Bio-Gel A-0.5 m, there was 13 mol of detergent/mol of the enzyme obtained by chromatography on the affinity resin. The direct affinity product was insensitive to glucagon and Gpp(NH)p; enzyme activity varied as a function of Lubrol concentration.