Nanostructured synthetic carbons obtained by pyrolysis of spherical acrylonitrile/divinylbenzene copolymers

Novel carbon materials have been prepared by the carbonization of acrylonitrile (AN)/divinylbenzene (DVB) suspension porous copolymers having nominal crosslinking degrees in the range of 30-70% and obtained in the presence of various amounts of porogens. The carbons were obtained by pre-oxidation of AN/DVB copolymers at 250-350°C in air followed by pyrolysis at 850°C in an N(2) atmosphere. Both processes were carried out in one furnace and the resulting material needed no further activation. Resulting materials were characterized by XPS and low temperature nitrogen adsorption/desorption. It was found that maximum pyrolysis yield was ca. 50% depending on the oxidation conditions but almost independent of the crosslinking degree of the polymers. Porous structure of the carbons was characterized for the presence of micropores and macropores, when obtained from highly crosslinked polymers or polymers oxidized at 350°C and meso- and macropores in all other cases. The latter pores are prevailing in the structure of carbons obtained from less porous AN/DVB resins. Specific surface area (BET) of polymer derived carbons can vary between 440 m(2)/g and 250 m(2)/g depending on the amount of porogen used in the synthesis of the AN/DVB polymeric precursors.     

Biodiesel production from canola oil by using lipase immobilized onto hydrophobic microporous styrene–divinylbenzene copolymer

In this study, the methyl esters of the long chain fatty acids (biodiesel) were synthesized by methanolysis of canola oil by immobilized lipase. Lipase from Thermomyces lanuginosus was immobilized by both physical adsorption and covalent attachment onto polyglutaraldehyde activated styrene–divinylbenzene (STY–DVB) copolymer, which is synthesized by using high internal phase emulsion (polyHIPE). Two different STY–DVB copolymers were evaluated: STY–DVB copolymer and STY–DVB copolymer containing polyglutaraldehyde (STY–DVB–PGA). Lipase from T. lanuginosus was immobilized with 60% and 85% yield on the hydrophobic microporous STY–DVB and STY–DVB–PGA copolymer, respectively. Biodiesel production using the latter lipase preparation was realized by a three-step addition of methanol to avoid strong substrate inhibition. Under the optimized conditions, the maximum biodiesel yield was 97% at 50 °C in 24 h reaction. The immobilized enzyme retained its activity during the 10 repeated batch reactions.     

A biofuel cell with enhanced performance by multilayer biocatalyst immobilized on highly ordered macroporous electrode

A one-compartment glucose/O(2) biofuel cell based on an electrostatic layer-by-layer (LbL) technique on three-dimensional ordered macroporous (3DOM) gold electrode was described. A 3DOM gold electrode was synthesized electrochemically by an inverted colloidal crystal template technique. Then the macroporous gold electrodes were functionalized with Au nanoparticles (AuNPs) and enzyme, glucose dehydrogenase (GDH) or laccase. The (AuNPs/GDH)(n) multilayer modified macroporous gold electrode showed excellent bioelectrocatalytic activity towards glucose. The direct electroreduction towards oxygen was realized at (AuNPs/laccase)(n) films on 3DOM gold electrodes. The maximum power density of the cell with the macroporous film as matrix was 178muWcm(-2) at 226mV, which was 16 times larger than that of the biofuel cell with the flat electrode under the same condition. The proposed method is simple and would be applicable to enhance the power output of miniaturized biofuel cell.     

Inhibition of angiogenesis in vitro with soluble copolymers monitored with a quartz crystal resonator

A quartz crystal resonator was used to monitor specific, integrin-mediated adhesion of human umbilical vein endothelial cells (HUVEC) to distinct water-soluble copolymers on a gold quartz crystal surface. This technique used transverse propagation of an acoustic shear wave generated by a sinusoidal electric field through the quartz crystal and the foreign material provides powerful and non-destructive means for characterizing cell-material interfacial properties. Measurements of the time-variation of the electrical motional resistance near the mechanical sensor resonant frequency were performed to test soluble copolymer plus cell suspensions. Cell adhesion in contact with various soluble copolymers was assessed by the quartz crystal resonator-based technique and compared with cell counting. Inhibition of HUVEC adhesion with different soluble copolymers of various chemical compositions was analyzed and discussed in the perspective of a possible application of these soluble copolymers to anti-angiogenesis. We have shown that bioactive methacrylic acid (MA)/sodium styrene sulfonate (NaSS) based copolymers, bearing both sulfonate and carboxylate groups inhibit adhesion of HUVEC when compared to HUVEC alone. The copolymers tested are excellent candidates for biomedical applications where inhibition of cell adhesion and proliferation is needed: these copolymers can be tested as bioactive molecules or agents against solid tumors, such as anti-angiogenic drugs.     

The use of immobilized Saccharomyces cerevisiae on radiation crosslinked acrylamide–maleic acid hydrogel carriers for production of ethyl alcohol

Radiation crosslinked acrylamide/maleic acid (AAm/MA) copolymers were prepared by γ-irradiation. They were used in experiments on swelling, diffusion, and immobilization of yeast cells (Saccharomyces cerevisiae) for the production of ethyl alcohol. AAm/MA hydrogels containing different amount of MA, irradiated at different doses, were used for swelling and diffusion studies. The parameters of swelling, diffusional exponents, network constants, diffusion coefficients and percent porosity of the hydrogel/penetrant systems were calculated and evaluated. Yeast cells were immobilized on to the hydrogels by adsorption during multiplication, and ethyl alcohol production by the hydrogels was investigated. Swelling of AAm/MA increased with increase in MA content. Ethyl alcohol production also increased with increasing MA in the hydrogels but decreased with an increase of irradiation dose.     

Characterisation of tyrosinase immobilised onto spacer-arm attached glycidyl methacrylate-based reactive microbeads

Immobilisation of tyrosinase onto modified poly(methyl methacrylate–glycidyl methacrylate–divinyl benzene), poly(MMA–GMA–DVB), microbeads was studied. The epoxy group containing poly(MMA–MMA–DVB) microbeads were prepared by suspension polymerisation. The epoxy groups of the poly(MMA–GMA–DVB) microbeads was converted into amino groups with either ammonia or 1,6-diaminohexane (i.e., spacer-arm). Tyrosinase was then covalently immobilised on aminated and the spacer-arm-attached poly(MMA–GMA–DVB) microbeads using glutaric dialdehyde as a coupling agent. Incorporation of the spacer-arm resulted an increase in the apparent activity of the immobilised tyrosinase with respect to the enzyme immobilised on the aminated microbeads. The activity yield of the immobilised tyrosinase on the spacer-arm-attached poly(MMA–GMA–DVB) microbeads was 68%, and this was 51% for the enzyme, which was immobilised on the aminated microbeads. Both immobilised tyrosinase preparation has resistance to temperature inactivation as compared to that of the free form. The temperature profiles were broader for both immobilised preparations than that of the free enzyme. Kinetic parameters were determined for immobilised tyrosinase preparations as well as for the free enzyme. The values of the Michaels constants (K_m) for all the immobilised tyrosinase preparations were significantly larger, indicating decreased affinity by the enzyme for its substrate, whereas V_max values were smaller for the both immobilised tyrosinase preparations. In a 40 h continuous operation with spacer-arm-attached poly(MMA–GMA–DVB) microbeads at 30 °C, only 3% of immobilised tyrosinase activity was lost. The operational inactivation rate constant (k_opi) of the immobilised tyrosinase was 1.25×10⁻⁵ min⁻¹.     

Preparation of polyelectrolyte-coated pH-sensitive poly(styrene) microcapsules and their application to initiation-cessation control of an enzyme reaction

Poly(styrene) microcapsules, prepared by depositing the polymer around emulsified aqueous droplets, were coated with a synthesized polyelectrolyte; i.e., copolymer of maleic acid (MA) with methyl vinyl ether (MVE), co-poly(MA, MVE), or with styrene (St), copoly(Ma, St). The permeability of the capsule membrane was investigated under various pHs of the outer medium using n-propyl alcohol as a permeant. It became apparent that either copoly(MA, St)- or copoly(MA, MVE)-coated microcapsules function as a pH-sensitive capsule. In particular, the former showed a dramatic change of the permeability in response to small differences in pH (5-6). By reference to the viscometric and electrophoretic studies of both copolymers, these were interpreted as being due to a pH-induced alteration of the configuration of the copolymer coating on the surface of the capsule membrane. When sucrose was hydrolyzed in an aqueous suspension of the copoly(MA, St)-coated capsules into which invertase was loaded, the hydrolytic reaction was initiated at pH 5. 5 and stopped at pH 4. 5. Such initiation-cessation control was repeated reversibly without damaging the capsules.     

Oligonucleotide analysis by anion exchange HPLC.

The ability to resolve and purify synthetic oligonucleotides by high performance anion exchange chromatography was evaluated using two wide pore polymeric HPLC matrices. The materials used are rigid macroporous copolymers which have a fully quaternised polyethyleneimine coating to provide a strong anion exchange, quaternary amine, functionality. Oligomers of poly(rA), poly(rC) and RNA produced by alkaline hydrolysis of the polymers were chromatographed to evaluate the selectivity of the system prior to the analysis of synthetic oligonucleotides produced using a commercial oligonucleotide synthesizer.     

Immobilization of cells via activated cell walls

Summary Cell walls of Saccharomyces cerevisiae and S. uvarum were activated by periodate oxidation of vicinal diol groups in cell wall polysaccharides. The aldehyde groups thus generated allow the yeast cells to be covalently bound to modified bead cellulose or macroporous glycidyl methacrylate supports, or to enzymes such as glucose oxidase and catalase.     

Selective isolation of bacteria from soil with hydrophobic materials

Bacterial strains having a hydrophobic cell surface have often been considered as degraders of hydrophobic organic pollutants in soil. In this study, bacterial strains were isolated using hydrophobic materials from 12 soil samples, and their cell surface hydrophobicity was determined by evaluating their adherence to n-hexane. Bacterial strains isolated using polytetrafluoroethylene (PTFE) membrane were more hydrophobic on an average than those isolated with styrene–divinylbenzene (DVB) particles or octadecylsilyl silica gel (ODS) particles. Strains closely related to Burkholderia cepacia could be selectively isolated using the PTFE membrane; those closely related to Ralstonia pickettii, using ODS and DVB particles; and those closely related to B. fungorum, using DVB. These results indicate that bacterial strains having a hydrophobic cell surface or within certain phyla can be selectively isolated from soils using hydrophobic materials, and that this isolation method would be useful for collecting candidates for bioremediation of hydrophobic pollutants.     

Thiol-yne and thiol-ene "click" chemistry as a tool for a variety of platinum drug delivery carriers, from statistical copolymers to crosslinked micelles

Statistical and block copolymers based on poly(2-hydroxyethyl methacrylate) (PHEMA) and poly[oligo(ethylene glycol) methylether methacrylate] (POEGMEMA) were modified with 4-pentenoic anhydride or 4-oxo-4-(prop-2-ynyloxy)butanoic anhydride to generate polymers with pendant vinyl or acetylene, respectively. Subsequent thiol-ene or thiol-yne reaction with thioglycolic acid or 2-mercaptosuccinic acid leads to polymers with carboxylate functionalities, which were conjugated with cisplatin (cis-diamminedichloroplatinum(II) (CDDP)) to generate a drug carrier for Pt-drugs. Only the polymers modified with 2-mercaptosuccinic acid resulted in the formation of soluble well-defined polymers with gel formation being prevented. Due to the hydrophobicity of the drug, the block copolymers took on amphiphilic character leading to micelle formation. The micelles were in addition crosslinked to further stabilize their structure. Pt-containing statistical copolymer, micelles, and crosslinked micelles were then tested regarding their cellular uptake by the A549 lung cancer cell line to show a superior uptake of crosslinked micelles. However, due to the better Pt release of the statistical copolymer, the highest cytotoxicity was observed with this type of polymer architecture.     

Preparation of photolithographically patterned inverse opal hydrogel microstructures and its application to protein patterning

Protein pattern has played an important role in biosensors, bioMEMS, tissue engineering, fundamental studies of cell biology, and basic proteomics research. Here, we developed a straightforward and effective protein patterning technique using macroporous poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel micropatterns as a three-dimensional (3D) template for protein immobilization. Micropatterns of macroporous hydrogels with inverse opal structures were prepared on poly(ethylene glycol) (PEG)-coated silicon substrates by combining a colloidal crystal templating method with photopatterning. The resultant inverse opal hydrogel (IOH) micropatterns were modified with 3-aminopropyltriethoxysilane using the hydroxyl groups in PHEMA for the covalent immobilization of proteins. Proteins were selectively immobilized only on the hydrogel micropatterns, while the PEG regions served as an effective barrier to protein adsorption. Because of their highly ordered and interconnected 3D macroporous structures and large internal surface areas, protein loading in the IOH micropattern was about six times greater than that on a non-porous hydrogel micropattern, which consequently improved the protein activity. The porosity of the hydrogel micropatterns could be controlled using different sizes of colloidal nanoparticles, and using smaller nanoparticles produced hydrogel micropatterns with higher protein loading capacities and activities. To demonstrate the potential use of IOH micropatterns in biosensor systems, biotin was micropatterned on the hydrogels and the specific binding of streptavidin was successfully assayed using IOH micropatterns with better fluorescence signals and sensitivity than that of the corresponding non-porous hydrogel micropatterns.     

Protective effects of a modified apelin-12 and dinitrosyl iron complexes in experimental cardioplegic ischemia and reperfusion

The maintenance of nitric oxide (NO) bioavailability has been recognized as an important component of myocardial protection during cardiac surgery. This study was designed to evaluate the efficacy of using two NO-donating compounds in cardioplegia and reperfusion: (i) a modified peptide apelin-12 (MA12) that activates endothelial NO synthase (eNOS) and (ii) dinitrosyl iron complexes with reduced glutathione (DNIC-GS), a natural NO vehicle. Isolated perfused working rat hearts were subjected to normothermic global ischemia and reperfusion. St. Thomas’ Hospital cardioplegic solution (STH) containing 140 μM MA12 or 100 μM DNIC-GS was used. In separate series, 140 μM MA12 or 100 μM DNIC-GS was administered at early reperfusion. Metabolic state of the hearts was evaluated by myocardial content of high-energy phosphates and lactate. Lactate dehydrogenase (LDH) activity in myocardial effluent was used as an index of cell membrane damage. Cardioplegia with MA12 or DNIC-GS improved recovery of coronary flow and cardiac function, and reduced LDH leakage in perfusate compared with STH without additives. Cardioplegic arrest with MA12 significantly enhanced preservation of high-energy phosphates and decreased accumulation of lactate in reperfused hearts. The overall protective effect of cardioplegia with MA12 was significantly greater than with DNIC-GS. The administration of MA12 or DNIC-GS at early reperfusion also increased metabolic and functional recovery of reperfused hearts. In this case, recovery of cardiac contractile and pump function indices was significantly higher if reperfusion was performed with DNIC-GS. The results show that MA12 and DNIC-GS are promising adjunct agents for protection of the heart during cardioplegic arrest and reperfusion.     

Role of intercellular contacts in generating an asymmetric mitotic apparatus in the Tubifex embryo

The 2-cell stage embryo of Tubifex is composed of a smaller cell, AB, and a larger cell, CD. At the second cleavage, the CD-cell divides unequally. The mitotic apparatus (MA) involved in this division is organized asymmetrically: the MA pole to be segregated to a smaller cell is flattened and truncated, and associated with the anterior cortex facing the AB-cell, while the other pole is symmetric and located more centrally. The present study was undertaken to elucidate the mechanism that generates asymmetry in the MA organization in CD-cells. When CD-cell nuclei, which are normally located near the anterior cortex, were displaced toward the posterior end of the cell (i.e. opposite AB-cells) by centrifugation, MA assembled ectopically there, and were bilaterally symmetric in organization. Similar symmetric MA were formed in isolated CD-cells, which divided more equally than intact cells. This equality of cell division was dramatically reduced if the anterior surface of isolated CD-cells formed contact with other cells, such as AB-, C- and 4D-cells. The MA that formed in these reconstituted embryos were asymmetric in organization; one MA pole was always found to be truncated and apposed to the cortical site at the cell contact. Symmetric MA were also observed in cytochalasin-treated embryos. Together with the finding that one of the MA poles is physically attached to the anterior cortex of the intact CD-cell, these results suggest that factors generating asymmetry in the spatial organization of MA poles reside at the anterior cortex of the CD-cell and that this cortical mechanism is dependent upon cell contacts.     

A Curtin–Hammett mechanism for the copolymerization of ethylene and methyl acrylate monomer using a PymNox nickel catalyst as revealed by DFT computational studies

In this work, the copolymerization of ethylene and methyl acrylate (MA) as catalyzed by a new Ni-based PymNox organometallic compound was studied computationally. We recently tested the behavior of this type of catalyst in ethylene homopolymerization. Experimental results show that the unsubstituted catalyst Ni2 (aldimino PymNox catalyst) is unable to incorporate the MA monomer, whereas methyl-substituted Ni1 (acetaldimino PymNox catalyst) is able to achieve copolymerization. The reactivities of both catalysts were examined using density functional theory (DFT) models. Based on energy profiles calculated at the BP86 level, a Curtin–Hammett mechanism was proposed to explain the different reactivities of the catalysts in ethylene/MA copolymerization. Our results indicate that the methyl substituent Ni1 introduces additional steric hindrance that results in a catalyst conformation that is better suited to polar monomer incorporation. This model provides insights into the design of new catalysts to produce polar functionalized copolymers based on ethylene.     

Growth of Listeria monocytogenes and Yersinia enterocolitica colonies under modified atmospheres at 4 and 8 degrees C using a model food system

The growth of Listeria monocytogenes and Yersinia enterocolitica colonies was studied on solid media at 4 and 8 degrees C under modified atmospheres (MAs) of 5% O2: 10% CO2: 85% N2 (MA1), 30% CO2: 70% N2 (MA2) and air (control). Colony radius, determined using computer image analysis, allowed specific growth rates (mu) and the time taken to detect bacterial colonies to be estimated, after colonies became visible. At 4 degrees C both MAs decreased the growth rates of L. monocytogenes by 1.5- and 3.0-fold under MA1 (mu = 0.02 h(-1)) and MA2 (mu = 0.01 h(-1)), respectively, as compared with the control (mu = 0.03 h(-1)). The time to detection of bacterial colonies was increased from 15 d (control) to 24 (MA1) and 29 d (MA2). At 8 degrees C MA2 decreased the growth rate by 1.5-fold (mu = 0.04 h(-1)) as compared with the control (mu = 0.06 h(-1)) and detection of colonies increased from 7 (control) to 9 d (MA2). At 4 degrees C both MAs decreased the growth rates of Y. enterocolitica by 1.5- and 2.5-fold under MA1 (mu = 0.03 h(-1)) and MA2 (mu = 0.02 h(-1)), respectively, as compared with the control (mu = 0.05 h(-1)). At 8 degrees C identical growth rates were obtained under MA1 and the control (mu = 0.07 h(-1)) whilst a decrease in the growth rate was obtained under MA2 (mu = 0.04 h(-1)). The detection of colonies varied from 6 (8 degrees C, aerobic) to 19 d (4 degrees C, MA2). Refrigerated modified atmosphere packaged foods should be maintained at 4 degrees C and below to ensure product safety.     

Saccharification and adsorption characteristics of modified cellulases with hydrophilic/hydrophobic copolymers.

Saccharification and adsorption characteristics of native and modified cellulases were investigated. Copolymers, containing polyoxyalkylene and maleic anhydride (MA) were used to modify cellulase. Amino groups of the cellulase were covalently coupled with the MA. As the degree of modification (DM) increased, the activity of modified cellulase slightly decreased. At the maximum DM, the modified cellulase activity retained more than 75% of the unmodified native cellulase activity. In saccharification, native cellulase rapidly adsorbed onto the substrate at initial reaction time. Native cellulase adsorbed tightly onto the substrate surface and did not desorb as reaction time proceeded. The strong adsorption of cellulase onto the substrate can, however, be controlled by the modification. As the hydrophilicity of modified cellulase increased, free modified enzyme concentration also increased. As a result, the conversion rate of modified cellulase was higher than the native one.     

Low molecular weight polyethylenimine grafted N-maleated chitosan for gene delivery: properties and in vitro transfection studies

To develop chitosan-based efficient gene vectors, chitosans with different molecular weights were chemically modified with low molecular weight polyethylenimine. The molecular weight and composition of polyethylenimine grafted N-maleated chitosan (NMC-g-PEI) copolymers were characterized using gel permeation chromatography (GPC) and (1)H NMR, respectively. Agarose gel electrophoresis assay showed that NMC-g-PEI had good binding ability with DNA, and the particle size of the NMC-g-PEI/DNA complexes was 200-400 nm, as determined by a Zeta sizer. The nanosized complexes observed by scanning electron microscopy (SEM) exhibited a compact and spherical morphology. The NMC-g-PEI copolymers showed low cytotoxicity and good transfection activity, comparable to PEI (25 KDa) in both 293T and HeLa cell lines, except for NMC 50K-g-PEI. The results indicated that the molecular weight of NMC-g-PEI has an important effect on cytotoxicity and transfection activity, and low molecular weight NMC-g-PEI has a good potential as efficient nonviral gene vectors.     

Immobilization of β-galactosidase on modified polypropilene membranes

A new immobilized system: β-galactosidase-modified polypropylene membrane was created. It was obtained 13 different carriers by chemical modification of polypropylene membranes by two stages. The first stage is treatment with K(2)Cr(2)O(7) to receive carboxylic groups on membrane surface. The second stage is treatment with different modified agents ethylendiamine, hexamethylenediamine, hydrazine dihydrochloride, hydroxylamine, o-phenylenediamine, p-phenylenediamine, N,N'-dibenzyl ethylenediamine diacetate to receive amino groups. The quantity of the amino groups, carboxylic groups and the degree of hydrophilicity of unmodified and modified polypropilene membranes were determined. β-Galactosidase was chemically immobilized on the obtained carries by glutaraldehyde. The highest relative activity of immobilized enzyme was recorded at membrane modified with 10% hexamethylenediamine (Membrane 5) - 92.77%. The properties of immobilized β-galactosidase on different modified membranes - pH optimum, temperature optimum, pH stability and thermal stability were investigated and compared with those of free enzyme. The storage stability of all immobilized systems was studied. It was found that the most stable system is immobilized enzyme on Membrane 5. The system has kept 90% of its initial activity at 300th day (pH=6.8; 4°C). The stability of the free and immobilized β-galactosidase on the modified membrane 5 with 10% HMDA in aqueous solutions of alcohols - mono-, diol and triol was studied. The kinetics of enzymatic reaction of free and immobilized β-galactosidase on the modified membrane 5 at 20°C and 40°C and at the optimal pH for both forms of the enzyme were investigated. It was concluded that the modified agent - hexamethylenediamine, with long aliphatic chain ensures the best immobilized β-galactosidase system.     

蓝舌病毒HbC3株对小鼠乳腺癌MA-782细胞的感染特性

体外研究蓝舌病毒湖北株3(BTV-HbC3)对鼠乳腺癌细胞MA782的感染性并探讨BTV-HbC3靶向性溶癌的机制。观察MA782细胞感染BTV-HbC3的病变效应(CPE);MTT法研究病毒致细胞病变率的特征;透射电镜观察感染病毒后细胞超微结构的变化;免疫组化研究病毒蛋白在细胞内的表达特点;凋亡染色(TUNEL法)观察病毒诱导细胞凋亡的情况;流式细胞仪测定病毒对MA782细胞周期的影响。结果证明BTV-HbC3感染MA782细胞后有明显的细胞病变效应;病毒蛋白主要表达在细胞的胞膜及胞浆内;凋亡染色发现大量的凋亡细胞;流式细胞仪可见明显的亚二倍体峰。故认为BTV-HbC3在体外能有效的感染MA782细胞,并能诱导MA782细胞凋亡。