Structure and function of the glucose PTS transporter from Escherichia coli

The glucose transporter IICB of the Escherichia coli phosphotransferase system (PTS) consists of a polytopic membrane domain (IIC) responsible for substrate transport and a hydrophilic C-terminal domain (IIB) responsible for substrate phosphorylation. We have overexpressed and purified a triple mutant of IIC (mut-IIC), which had recently been shown to be suitable for crystallization purposes. Mut-IIC was homodimeric as determined by blue native-PAGE and gel-filtration, and had an eyeglasses-like structure as shown by negative-stain transmission electron microscopy (TEM) and single particle analysis. Glucose binding and transport by mut-IIC, mut-IICB and wildtype-IICB were compared with scintillation proximity and in vivo transport assays. Binding was reduced and transport was impaired by the triple mutation. The scintillation proximity assay allowed determination of substrate binding, affinity and specificity of wildtype-IICB by a direct method. 2D crystallization of mut-IIC yielded highly-ordered tubular crystals and made possible the calculation of a projection structure at 12 Å resolution by negative-stain TEM. Immunogold labeling TEM revealed the sidedness of the tubular crystals, and high-resolution atomic force microscopy the surface structure of mut-IIC. This work presents the structure of a glucose PTS transporter at the highest resolution achieved so far and sets the basis for future structural studies.     

The G protein-coupled receptor rhodopsin in the native membrane

The higher-order structure of G protein-coupled receptors (GPCRs) in membranes may involve dimerization and formation of even larger oligomeric complexes. Here, we have investigated the organization of the prototypical GPCR rhodopsin in its native membrane by electron and atomic force microscopy (AFM). Disc membranes from mice were isolated and observed by AFM at room temperature. In all experimental conditions, rhodopsin forms structural dimers organized in paracrystalline arrays. A semi-empirical molecular model for the rhodopsin paracrystal is presented validating our previously reported results. Finally, we compare our model with other currently available models describing the supramolecular structure of GPCRs in the membrane.     

Direct evidence for membrane pore formation by the apoptotic protein Bax

Direct imaging of the interaction of the apoptotic protein, Bax, with membrane bilayers shows the presence of toroidal-shaped pores using atomic force microscopy. These pores are sufficiently large to allow passage of proteins from the intermitochondrial space. Both the perturbation of the membrane and the amount of protein bound to the bilayer are increased in the presence of calcium. The results from the imaging are consistent with leakage studies from liposomes of the same composition. The work shows that Bax by itself can form pores in membrane bilayers.     

Reconstitution of mitochondrial ATP synthase into lipid bilayers for structural analysis

Mitochondrial F₁F_o-ATP synthase is a molecular motor that couples the energy generated by oxidative metabolism to the synthesis of ATP. Direct visualization of the rotary action of the bacterial ATP synthase has been well characterized. However, direct observation of rotation of the mitochondrial enzyme has not been reported yet. Here, we describe two methods to reconstitute mitochondrial F₁F_o-ATP synthase into lipid bilayers suitable for structure analysis by electron and atomic force microscopy (AFM). Proteoliposomes densely packed with bovine heart mitochondria F₁F_o-ATP synthase were obtained upon detergent removal from ternary mixtures (lipid, detergent and protein). Two-dimensional crystals of recombinant hexahistidine-tagged yeast F₁F_o-ATP synthase were grown using the supported monolayer technique. Because the hexahistidine-tag is located at the F₁ catalytic subcomplex, ATP synthases were oriented unidirectionally in such two-dimensional crystals, exposing F₁ to the lipid monolayer and the F_o membrane region to the bulk solution. This configuration opens a new avenue for the determination of the c-ring stoichiometry of unknown hexahistidine-tagged ATP synthases and the organization of the membrane intrinsic subunits within F_o by electron microscopy and AFM.     

Role of ceramide in membrane protein organization investigated by combined AFM and FCS

Ceramide-induced alterations in the lateral organization of membrane proteins can be involved in several biological contexts, ranging from apoptosis to viral infections. In order to investigate such alterations in a simple model, we used a combined approach of atomic force microscopy, scanning fluorescence correlation spectroscopy and confocal fluorescence imaging to study the partitioning of different membrane components in sphingomyelin/dioleoyl-phosphatidylcholine/cholesterol/ceramide supported bilayers. Such model membranes exhibit coexistence of liquid-disordered, liquid-ordered (raft-like) and ceramide-rich lipid phases. Our results show that components with poor affinity toward the liquid-ordered phase, such as several fluorescent lipid analogues or the synaptic protein Synaptobrevin 2, are excluded from ceramide-rich domains. Conversely, we show for the first time that the raft-associated protein placental alkaline phosphatase (GPI-PLAP) and the ganglioside G_M1 are enriched in such domains, while exhibiting a strong decrease in lateral diffusion. Analogue modulation of the local concentration and dynamics of membrane proteins/receptors by ceramide can be of crucial importance for the biological functions of cell membranes.     

Atomic force microscopy differentiates discrete size distributions between membrane protein containing and empty nanolipoprotein particles

To better understand the incorporation of membrane proteins into discoidal nanolipoprotein particles (NLPs) we have used atomic force microscopy (AFM) to image and analyze NLPs assembled in the presence of bacteriorhodopsin (bR), lipoprotein E4 n-terminal 22k fragment scaffold and DMPC lipid. The self-assembly process produced two distinct NLP populations: those containing inserted bR (bR-NLPs) and those that did not (empty-NLPs). The bR-NLPs were distinguishable from empty-NLPs by an average increase in height of 1.0 nm as measured by AFM. Streptavidin binding to biotinylated bR confirmed that the original 1.0 nm height increase corresponds to br-NLP incorporation. AFM and ion mobility spectrometry (IMS) measurements suggest that NLP size did not vary around a single mean but instead there were several subpopulations, which were separated by discrete diameters. Interestingly, when bR was present during assembly the diameter distribution was shifted to larger particles and the larger particles had a greater likelihood of containing bR than smaller particles, suggesting that membrane proteins alter the mechanism of NLP assembly.     

Mini review on the structure and supramolecular assembly of VDAC

The Voltage Dependent Anion Channel (VDAC) is the most abundant protein in the outer membrane of mitochondria. This strategic localization puts it at the heart of a great number of phenomena. Its recent implication in apoptosis is an example of the major importance of this protein and has created a surge of interest in VDAC. There is no atomic-resolution structure allowing a better understanding of the function of VDAC, so alternative techniques to X-ray diffraction have been used to study VDAC. Here we discuss structural models from folding predictions and review data acquired by Atomic Force Microscopy (AFM) imaging that allowed to observe VDAC’s structure and supramolecular organization in the mitochondrial outer membrane.     

Membrane protein reconstitution and crystallization by controlled dilution

Efficient reconstitution of membrane proteins for functional analyses can be achieved by dilution of a ternary mixture containing proteins, lipids and detergents. Once the dilution reaches the point where the free detergent concentration would become lower than the critical micellar concentration, detergent is recruited from the bound detergent pool, and association of proteins and lipids is initiated. Here we show that dilution is also suitable for the assembly of two-dimensional crystals. A device has been designed that allows controlled dilution of a protein-lipid-detergent mixture to induce formation of densely packed or crystalline proteoliposomes. Turbidity is used to monitor the progress of reconstitution on-line, while dilution is achieved by computer-controlled addition of buffer solution in sub-microliter steps. This system has mainly been tested with porin OmpF, a typical beta-barrel protein, and aquaporin-1, a typical alpha-helical protein. The results demonstrate that large, highly ordered two-dimensional crystals can be produced by the dilution method.     

Surface topography of membrane domains

Elucidating origin, composition, size, and lifetime of microdomains in biological membranes remains a major issue for the understanding of cell biology. For lipid domains, the lack of a direct access to the behaviour of samples at the mesoscopic scale has constituted for long a major obstacle to their characterization, even in simple model systems made of immiscible binary mixtures. By its capacity to image soft surfaces with a resolution that extends from the molecular to the microscopic level, in air as well as under liquid, atomic force microscopy (AFM) has filled this gap and has become an inescapable tool in the study of the surface topography of model membrane domains, the first essential step for the understanding of biomembranes organization. In this review we mainly focus on the type of information on lipid microdomains in model systems that only AFM can provide. We will also examine how AFM can contribute to understand data acquired by a variety of other techniques and present recent developments which might open new avenues in model and biomembrane AFM applications.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Coarse-grained molecular dynamics simulations of membrane proteins and peptides

Molecular dynamics (MD) simulations provide a valuable approach to the dynamics, structure, and stability of membrane-protein systems. Coarse-grained (CG) models, in which small groups of atoms are treated as single particles, enable extended (>100 ns) timescales to be addressed. In this study, we explore how CG-MD methods that have been developed for detergents and lipids may be extended to membrane proteins. In particular, CG-MD simulations of a number of membrane peptides and proteins are used to characterize their interactions with lipid bilayers. CG-MD is used to simulate the insertion of synthetic model membrane peptides (WALPs and LS3) into a lipid (PC) bilayer. WALP peptides insert in a transmembrane orientation, whilst the LS3 peptide adopts an interfacial location, both in agreement with experimental biophysical data. This approach is extended to a transmembrane fragment of the Vpu protein from HIV-1, and to the coat protein from fd phage. Again, simulated protein/membrane interactions are in good agreement with solid state NMR data for these proteins. CG-MD has also been applied to an M3-M4 fragment from the CFTR protein. Simulations of CFTR M3-M4 in a detergent micelle reveal formation of an alpha-helical hairpin, consistent with a variety of biophysical data. In an I231D mutant, the M3-M4 hairpin is additionally stabilized via an inter-helix Q207/D231 interaction. Finally, CG-MD simulations are extended to a more complex membrane protein, the bacterial sugar transporter LacY. Comparison of a 200 ns CG-MD simulation of LacY in a DPPC bilayer with a 50 ns atomistic simulation of the same protein in a DMPC bilayer shows that the two methods yield comparable predictions of lipid-protein interactions. Taken together, these results demonstrate the utility of CG-MD simulations for studies of membrane/protein interactions.     

Setting up and running molecular dynamics simulations of membrane proteins

Molecular dynamics simulations have become a popular and powerful technique to study lipids and membrane proteins. We present some general questions and issues that should be considered prior to embarking on molecular dynamics simulation studies of membrane proteins and review common simulation methods. We suggest a practical approach to setting up and running simulations of membrane proteins, and introduce two new (related) methods to embed a protein in a lipid bilayer. Both methods rely on placing lipids and the protein(s) on a widely spaced grid and then 'shrinking' the grid until the bilayer with the protein has the desired density, with lipids neatly packed around the protein. When starting from a grid based on a single lipid structure, or several potentially different lipid structures (method 1), the bilayer will start well-packed but requires more equilibration. When starting from a pre-equilibrated bilayer, either pure or mixed, most of the structure of the bilayer stays intact, reducing equilibration time (method 2). The main advantages of these methods are that they minimize equilibration time and can be almost completely automated, nearly eliminating one time consuming step in MD simulations of membrane proteins.     

A high-throughput assay of membrane protein stability

The preparation of purified, detergent-solubilized membrane proteins in a monodisperse and stable form is usually a prerequisite for investigation not only of their function but also for structural studies by X-ray crystallography and other approaches. Typically, it is necessary to explore a wide range of conditions, including detergent type, buffer pH, and the presence of additives such as glycerol, in order to identify those optimal for stability. Given the difficulty of expressing and purifying membrane proteins in large amounts, such explorations must ideally be performed on as small a scale as practicable. To achieve this objective in the UK Membrane Protein Structure Initiative, we have developed a rapid, economical, light-scattering assay of membrane protein aggregation that allows the testing of 48 buffer conditions in parallel on 6 protein targets, requiring less than 2 mg protein for each target. Testing of the assay on a number of unrelated membrane transporters has shown that it is of generic applicability. Proteins of sufficient purity for this plate-based assay are first rapidly prepared using simple affinity purification procedures performed in batch mode. Samples are then transferred by microdialysis into each of the conditions to be tested. Finally, attenuance at 340 nm is monitored in a 384-well plate using a plate reader. Optimal conditions for protein stability identified in the assay can then be exploited for the tailored purification of individual targets in as stable a form as possible.     

A comparative study of the membrane proteins from Naegleria species: A 23-kDa protein participates in the virulence of Naegleria fowleri

The plasma membrane is essential in the pathogenicity of several microorganisms. However, to date, there are few studies related to the plasma membrane proteins in Naegleria fowleri; this amoeba produces a fatal disease called primary amoebic meningoencephalitis. In the present study, we analyzed the electrophoretic pattern of the membrane proteins of N. fowleri and compared it with the nonpathogenic N. lovaniensis and N. gruberi. We detected a 23-kDa protein (Nf23) present at a higher level in N. fowleri than in the nonpathogenic amoebae. The mass spectrometry analysis showed that the Nf23 protein has a sequence of 229 amino acids that corresponds to a membrane protein. The mRNA level of nf23 was overexpressed 4-fold and 40,000-fold in N. fowleri compared with N. lovaniensis and N. gruberi, respectively. Moreover, we found a 5-fold overexpression of nf23 in N. fowleri trophozoites recovered from mouse brains compared with trophozoites axenically cultivated. In addition, the cytopathic effect on Madin-Darby Canine Kidney cells coincubated with N. fowleri diminished in the presence of antibodies against Nf23; nevertheless, the nonpathogenic amoebae did not produce damage to the monolayer cells. These results suggest that the plasma membrane protein Nf23 is probably involved in the virulence of N. fowleri.     

Nanoscale orientation and lateral organization of chimeric metal-binding green fluorescent protein on lipid membrane determined by epifluorescence and atomic force microscopy

Epifluorescence microscopy as well as atomic force microscopy was successfully applied to explore the orientation and lateral organization of a group of chimeric green fluorescent proteins (GFPs) on lipid membrane. Incorporation of the chimeric GFP carrying Cd-binding region (His6CdBP4GFP) to the fluid phase of DPPC monolayer resulted in a strong fluorescence intensity at the air-water interface. Meanwhile, non-specific adsorption of the GFP having hexahistidine (His6GFP) led to the perturbation of the protein structure in which very low fluorescence was observed. Specific binding of both of the chimeric GFPs to immobilized zinc ions underneath the metal-chelating lipid membrane was revealed. This specific binding could be reversibly controlled by addition of metal ions or metal chelator. Binding of the chimeric GFPs to the metal-chelating lipid membrane was proven to be the end-on orientation while the side-on adsorption was contrarily noted in the absence of metal ions. Increase of lateral mobility owing to the fluidization effect on the chelating lipid membrane subsequently facilitated crystal formation. All these findings have opened up a potential approach for a specific orientation of immobilization of protein at the membrane interface. This could have accounted for a better opportunity of sensor development.     

Profiling of gene-dependent translational progress in cell-free protein synthesis by real-space imaging

In general, gene-dependent translational progress affects the efficiency of protein expression. To evaluate the translational progress of protein synthesis, it is necessary to trace the time course of translation as well as the quantity of products. Here we present a new method for tracking translation steps in cell-free protein synthesis using atomic force microscopy (AFM). The cell-free protein synthesis system is useful to track the inherent translational progress of a target gene, whereas conventional UV absorption measurement coupled with density gradient fractionation is difficult to analyze such small sample quantities. Because the high resolution of AFM enables us to clearly count the number of ribosomes included in polysomes, polysome profiles can be obtained directly without complicated fractionation. With this method, we could elucidate the detailed polysome profile with only 1 μl of sample solution. We observed the translational progress of green fluorescent protein synthesis, a model of high-expression protein, as well as human retinoid X receptor. Detailed polysome profiles showed different patterns of translational progress and were clearly associated with the results of time-dependent protein expression. Our study suggests the possibility for comprehensive character analysis of inherent gene-dependent translational progress.     

Structural analysis of membrane protein complexes by single particle electron microscopy

Single particle electron microscopy (EM) is an increasingly important tool for the structural analysis of macromolecular complexes. The main advantage of the technique over other methods is that it is not necessary to precede the analysis with the growth of crystals of the sample. This advantage is particularly important for membrane proteins and large protein complexes where generating crystals is often the main barrier to structure determination. Therefore, single particle EM can be employed with great utility in the study of large membrane protein complexes. Although the construction of atomic resolution models by single particle EM is possible in theory, currently the highest resolution maps are still limited to approximately 7-10A resolution and 15-30 A resolution is more typical. However, by combining single particle EM maps with high-resolution models of subunits or subcomplexes from X-ray crystallography and NMR spectroscopy it is possible to build up an atomic model of a macromolecular assembly. Image analysis procedures are almost identical for micrographs of soluble protein complexes and detergent solubilized membrane protein complexes. However, electron microscopists attempting to prepare specimens of a membrane protein complex for imaging may find that these complexes require different handling than soluble protein complexes. This paper seeks to explain how high-quality specimen grids of membrane protein complexes may be prepared to allow for the determination of their structure by EM and image analysis.     

Resolving the molecular structure of microtubules under physiological conditions with scanning force microscopy

We have imaged microtubules, essential structural elements of the cytoskeleton in eukaryotic cells, in physiological conditions by scanning force microscopy. We have achieved molecular resolution without the use of cross-linking and chemical fixation methods. With tip forces below 0.3 nN, protofilaments with ~6 nm separation could be clearly distinguished. Lattice defects in the microtubule wall were directly visible, including point defects and protofilament separations. Higher tip forces destroyed the top half of the microtubules, revealing the inner surface of the substrate-attached protofilaments. Monomers could be resolved on these inner surfaces.Abbreviations APTS (3-aminopropyl)triethoxysilane - DETA N¹-[3-(trimethoxysilyl)propyl]diethylenetriamine - EM electron microscopy - MT microtubule - SFM scanning force microscopy     

Insights into protein structure and function from disorder-complexity space

Intrinsically disordered proteins have a wide variety of important functional roles. However, the relationship between sequence and function in these proteins is significantly different than that for well-folded proteins. In a previous work, we showed that the propensity to be disordered can be recognized based on sequence composition alone. Here that analysis is furthered by examining the relationship of disorder propensity to sequence complexity, where the metrics for these two properties depend only on composition. The distributions of 40 amino acid peptides from both ordered and disordered proteins are graphed in this disorder-complexity space. An analysis of Swiss-Prot shows that most peptides have high complexity and relatively low disorder. However, there are also an appreciable number of low complexity-high disorder peptides in the database. In contrast, there are no low complexity-low disorder peptides. A similar analysis for peptides in the PDB reveals a much narrower distribution, with few peptides of low complexity and high disorder. In this case, the bounds of the disorder-complexity distribution are well defined and might be used to evaluate the likelihood that a peptide can be crystallized with current methods. The disorder-complexity distributions of individual proteins and sets of proteins grouped by function are also examined. Among individual proteins, there is an enormous variety of distributions that in some cases can be rationalized with regard to function. Groups of functionally related proteins are found to have distributions that are similar within each group but show notable differences between groups. Finally, a pattern matching algorithm is used to search for proteins with particular disorder-complexity distributions. The results suggest that this approach might be used to identify relationships between otherwise dissimilar proteins.     

Crystallization of the membrane protein hVDAC1 produced in cell-free system

Structural studies of membrane proteins are in constant evolution with the development of new improvements for their expression, purification, stabilization and crystallization. However, none of these methods still provides a universal approach to solve the structure of membrane proteins. Here we describe the crystallization of the human voltage-dependent anion channel-1 produced by a bacterial cell-free expression system. While VDAC structures have been recently solved, we propose an alternative strategy for producing the recombinant protein, which can be applied to other membrane proteins reluctant to expression, purification and crystallization by classical approaches. Despite a lot of efforts to crystallize a cell-free expressed membrane protein, this study is to our knowledge one of the first reports of a successful crystallization. Focusing on expression in a soluble and functional state, in a detergent environment, is the key to get crystals. Although the diffraction of VDAC crystals is limited, the simplicity and the rapidity to set-up and optimize this technology are drastic advantages in comparison to other methods.