Mechanical behavior of coronary stents investigated through the finite element method

Intravascular stents are small tube-like structures expanded into stenotic arteries to restore blood flow perfusion to the downstream tissues. The stent is mounted on a balloon catheter and delivered to the site of blockage. When the balloon is inflated, the stent expands and is pressed against the inner wall of the coronary artery. After the balloon is deflated and removed, the stent remains in place, keeping the artery open. Hence, the stent expansion defines the effectiveness of the surgical procedure: it depends on the stent geometry, it includes large displacements and deformations and material non-linearity.In this paper, the finite element method is applied (i) to understand the effects of different geometrical parameters (thickness, metal-to-artery surface ratio, longitudinal and radial cut lengths) of a typical diamond-shaped coronary stent on the device mechanical performance, (ii) to compare the response of different actual stent models when loaded by internal pressure and (iii) to collect suggestions for optimizing the device shape and performance.The stent expansion and partial recoil under balloon inflation and deflation were simulated. Results showed the influence of the geometry on the stent behavior: a stent with a low metal-to-artery surface ratio has a higher radial and longitudinal recoil, but a lower dogboning. The thickness influences the stent performance in terms of foreshortening, longitudinal recoil and dogboning.In conclusion, a finite element analysis similar to the one herewith proposed could help in designing new stents or analyzing actual stents to ensure ideal expansion and structural integrity, substituting in vitro experiments often difficult and unpractical.     

Numerical study of the uniformity of balloon-expandable stent deployment

Stents are small tubelike structures, implanted in coronary and peripheral arteries to reopen narrowed vessel sections. This endovascular intervention remains suboptimal, as the success rate is limited by restenosis. This renarrowing of a stented vessel is related to the arterial injury caused by stent-artery and balloon-artery interactions, and a local subsequent inflammatory process. Therefore, efforts to optimize the stent deployment remain very meaningful. Several authors have studied with finite element modeling the mechanical behavior of balloon-expandable stents, but none of the proposed models incorporates the folding pattern of the balloon. We developed a numerical model in which the CYPHER stent is combined with a realistic trifolded balloon. In this paper, the impact of several parameters such as balloon length, folding pattern, and relative position of the stent with respect to the balloon catheter on the free stent expansion has been investigated. Quantitative validation of the modeling strategy shows excellent agreement with data provided by the manufacturer and, therefore, the model serves as a solid basis for further investigations. The parametric analyses showed that both the balloon length and the folding pattern have a considerable influence on the uniformity and symmetry of the transient stent expansion. Consequently, this approach can be used to select the most appropriate balloon length and folding pattern for a particular stent design in order to optimize the stent deployment. Furthermore, it was demonstrated that small positioning inaccuracies may change the expansion behavior of a stent. Therefore, the placement of the stent on the balloon catheter should be accurately carried out, again in order to decrease the endothelial damage.     

Modeling of stents exhibiting negative Poisson's ratio effect

Intravascular stents are metallic scaffolding structures deployed in the stenotic arteries to restore the lumen for the blood flow to the down stream tissues. Most stents are balloon expandable and are deployed from its crimped state through a balloon catheter. The efficacy of the stenting procedure mainly depends on the way the stent is deployed. Both numerical and experimental evaluations show that almost all the present day stents undergo the most undesirable effects namely: (i) longitudinal foreshortening: the axial contraction in the length, and (ii) dogboning: flaring of the distal edges, during the radial expansion of the stents. Due to the foreshortening effect, clinicians are forced to select stents longer than the plaque. Still, the final length of the stent depends on the amount of radial expansion, which is subjective during the procedure. This paper introduces a new stent model called “Murugan”, which exhibits negative Poisson's ratio effect. That is, the stent may have zero axial contraction or can have extension when under radial expansion. The presence of hyperelastic balloon and the stent–balloon friction is also considered to study their effects in mechanical properties of the stents under consideration. Free expansion analysis is done using finite element method (FEM) to compare the new stent model with the present day stent geometries.     

On the effects of different strategies in modelling balloon-expandable stenting by means of finite element method

In recent years, computational structural analyses have emerged as important tools to investigate the mechanical response of stent placement into arterial walls. Although most coronary stents are expanded by inflating a polymeric balloon, realistic computational balloon models have been introduced only recently. In the present study, the finite element method is applied to simulate three different approaches to evaluate stent-free expansion and stent expansion inside an artery. Three different stent expansion modelling techniques were analysed by: (i) imposing a uniform pressure on the stent internal surface, (ii) a rigid cylindrical surface expanded with displacement control and (iii) modelling a polymeric deformable balloon. The computational results showed differences in the free and confined-stent expansions due to different expansion techniques. The modelling technique of the balloon seems essential to estimate the level of injury caused on arterial walls during stent expansion.     

Modeling of stents exhibiting negative Poisson's ratio effect

Intravascular stents are metallic scaffolding structures deployed in the stenotic arteries to restore the lumen for the blood flow to the down stream tissues. Most stents are balloon expandable and are deployed from its crimped state through a balloon catheter. The efficacy of the stenting procedure mainly depends on the way the stent is deployed. Both numerical and experimental evaluations show that almost all the present day stents undergo the most undesirable effects namely: (i) longitudinal foreshortening: the axial contraction in the length, and (ii) dogboning: flaring of the distal edges, during the radial expansion of the stents. Due to the foreshortening effect, clinicians are forced to select stents longer than the plaque. Still, the final length of the stent depends on the amount of radial expansion, which is subjective during the procedure. This paper introduces a new stent model called "Murugan", which exhibits negative Poisson's ratio effect. That is, the stent may have zero axial contraction or can have extension when under radial expansion. The presence of hyperelastic balloon and the stent-balloon friction is also considered to study their effects in mechanical properties of the stents under consideration. Free expansion analysis is done using finite element method (FEM) to compare the new stent model with the present day stent geometries.     

Long period of balloon inflation and the implantation of stents potentiate smooth muscle cell death. Possible role of chronic vascular injury in restenosis

BACKGROUND: It has been suggested that the severity of acute vascular injury immediately after percutaneous transluminal coronary angioplasty (PTCA) or stent implantation correlates with the extent of neointimal hyperplasia and restenosis. However, the influence of prolonged or chronic vessel injury on the pathogenesis of restenosis is unclear. METHODS: Rabbit iliac arteries were balloon dilated for a short (1 min) or prolonged (10 min) period of time, or were chronically dilated and received a Palmaz-Schatz stent (balloon inflation for 1 min). All arteries were overexpanded to a balloon:artery ratio of 1.2:1 as determined by angiography. The arteries were removed 30 min and 4 weeks after the angioplasty procedures. The sites of injury were evaluated by gross histology and transmission electron microscopy (TEM). Cell death of medial smooth muscle cells (SMCs) was specified by TEM images 30 min after the procedures. Computer-assisted quantification of the neointimal cross-sectional areas was performed after 4 weeks using a light microscope connected to a digital image analyser. RESULTS: The results show that prolonged balloon dilatation and stent implantation increased necrotic SMC death compared with balloon dilatation for 1 min. After 30 min, increased staining of SMC nuclei, enlarged intercellular spaces and changes in SMC shape in the media indicated cell death induced by prolonged balloon dilatation or chronic stent injury. Stent implantation markedly augmented vessel damage by persistent compression of the media, compared with a balloon dilatation for 1 or 10 min. Both prolonged balloon dilatation and stent implantation increased neointimal hyperplasia at 4 weeks compared with balloon dilatation for 1 min (0.6 3 0.2 and 1.0 3 0.2 mm(2) versus 0.2 3 0.1 mm(2), P < 0.001 versus dilatation for 1 min). CONCLUSION: Prolonged or chronic vascular expansion due to long balloon-inflation periods or the implantation of stents increases medial SMC death, which subsequently stimulates neointimal growth in this restenosis model. Chronic vascular injury may be an important stimulus for restenosis after angioplasty procedures.     

Mechanical and hydrodynamic effects of stent expansion in tapered coronary vessels

Percutaneous coronary intervention (PCI) has become the primary treatment for patients with coronary heart disease because of its minimally invasive nature and high efficiency. Anatomical studies have shown that most coronary vessels gradually shrink, and the vessels gradually become thinner from the proximal to the distal end. In this paper, the effects of different stent expansion methods on the mechanical and hemodynamic behaviors of coronary vessels and stents were studied. To perform a structural-mechanical analysis of stent implantation, the coronary vessels with branching vessels and the coronary vessels with large bending curvature are selected. The two characteristic structures are implanted in equal diameter expansion mode and conical expansion mode, and the stress and mechanical behaviors of the coronary vessels and stents are analyzed. The results of the structural-mechanical analysis showed that the mechanical behaviors and fatigue performance of the cobalt-chromium alloy stent were good, and the different expansion modes of the stent had little effect on the fatigue performance of the stent. However, the equal diameter expansion mode increased distal coronary artery stress and the risk of vascular injury. The computational fluid dynamics analysis results showed that different stent expansion methods had varied effects on coronary vessel hemodynamics and that the wall shear stress distribution of conical stent expansion is more uniform compared with equal diameter expansion. Additionally, the vortex phenomenon is not apparent, the blood flow velocity is slightly increased, the hydrodynamic environment is more reasonable, and the risk of coronary artery injury is reduced.

     

Realistic finite element-based stent design: the impact of balloon folding

At present, the deployment of an intravascular stent has become a common and widely used minimally invasive treatment for coronary heart disease. To improve these coronary revascularization procedures (e.g. reduce in-stent restenosis rates) the optimal strategy lies in the further development of stent design, material and coatings. In the context of optimizing the stent design, computational models can provide an excellent research tool. In this study, the hypothesis that the free expansion of a stent is determined by the unfolding and expansion of the balloon is examined. Different expansion modeling strategies are studied and compared for a new generation balloon-expandable coronary stent. The trifolded balloon methodology presented in this paper shows very good qualitative and quantitative agreement with both manufacturer's data and experiments. Therefore, the proposed numerical expansion strategy appears to be a very promising optimization methodology in stent design.     

Simulation of a balloon expandable stent in a realistic coronary artery—Determination of the optimum modelling strategy

Computational models of stent deployment in arteries have been widely used to shed light on various aspects of stent design and optimisation. In this context, modelling of balloon expandable stents has proved challenging due to the complex mechanics of balloon–stent interaction and the difficulties involved in creating folded balloon geometries. In this study, a method to create a folded balloon model is presented and utilised to numerically model the accurate deployment of a stent in a realistic geometry of an atherosclerotic human coronary artery. Stent deployment is, however, commonly modelled by applying an increasing pressure to the stent, thereby neglecting the balloon. This method is compared to the realistic balloon expansion simulation to fully elucidate the limitations of this procedure. The results illustrate that inclusion of a realistic balloon model is essential for accurate modelling of stent deformation and stent stresses. An alternative balloon simulation procedure is presented however, which overcomes many of the limitations of the applied pressure approach by using elements which restrain the stent as the desired diameter is achieved. This study shows that direct application of pressure to the stent inner surface may be used as an optimal modelling strategy to estimate the stresses in the vessel wall using these restraining elements and hence offer a very efficient alternative approach to numerically modelling stent deployment within complex arterial geometries. The method is limited however, in that it can only predict final stresses in the stented vessel and not those occurring during stent expansion, in which case the balloon expansion model is required.     

Modelling of the provisional side-branch stenting approach for the treatment of atherosclerotic coronary bifurcations: effects of stent positioning

The most common approach to treat atherosclerosis in coronary bifurcations is the provisional side-branch (PSB) stenting, which consists sequentially of the insertion of a stent in the main branch (MB) of the bifurcation and a dilatation of the side branch (SB) passing through the struts of the stent at the bifurcation. This approach can be followed by a redilatation of the MB only or by a Final Kissing Balloon (FKB) inflation, both strategies leading to a minor stent distortion in the MB. The positioning of the stent struts in the bifurcation and the stresses generated in the stent and vessel wall are worthy of investigation for a better understanding of the mechanobiology of the system. For this purpose, a computer model of an atherosclerotic coronary bifurcation based on the finite element method was developed; the effects of performing the final redilatation with the two strategies utilising one or two balloons and those created by a different stent strut positioning around the SB were investigated. Results correlate well with previous experimental tests regarding the deformation following balloon expansion. Furthermore, results confirm firstly that the re-establishment of an optimal spatial configuration of the stent after the PSB approach is achieved with both strategies; secondly, results show that case of stent positioning with one cell placed centrally (with regard to the SB) should be preferred, avoiding the presence of struts inside the vessel lumen, which may reduce hemodynamic disturbances. The central positioning also resulted in a better solution in terms of lower stresses in the stent struts and, more importantly, in the vascular tissues.     

Finite element modeling of a progressively expanding shape memory stent

Cardiovascular stents are small cylindrical devices introduced in stenosed arteries to reopen the lumen and restore blood flow. However, this treatment presents complications, including restenosis, which is the reclosing of the artery's diameter after the insertion of a stent. The structure of the prosthesis penetrates into and injures the walls of the patient's artery. There then follows a proliferation of cells and the formation of scar tissue around the injury, similar to the scarring of other organic tissues. This reaction to the trauma subjects the artery to close. The proposed solution is to develop a Nitinol stent with a progressive expansion device made of polyethylene, allowing smooth and gradual contact between the stent and the artery's wall by creep effect. The purpose of this paper is to describe the technology and methodology for the numerical study of this kind of stent through the finite element method. ANSYS 8.0 software is used to perform the analysis. The Nitinol is modeled with a superelastic law and the polyethylene with a yield hardening law. A first simulation determines the final geometry of the stent laser cut from a small tube. A second simulation examines the behavior of the prosthesis during surgery and over the 4 weeks following the operation. The results demonstrate that a compromise can be reached between a limited expansion prior the inflation of the expandable balloon and a significant expansion by creep of the polymer rings.     

The effects of stenting on coronary endothelium from a molecular biological view: Time for improvement?

Coronary artery stenting following balloon angioplasty represents the gold standard in revascularization of coronary artery stenoses. However, stent deployment as well as percutaneous transluminal coronary angioplasty (PTCA) alone causes severe injury of vascular endothelium. The damaged endothelium is intrinsically repaired by locally derived endothelial cells and by circulating endothelial progenitor cells from the blood, leading to re‐population of the denuded regions within several weeks to months. However, the process of re‐endothelialization is often incomplete or dysfunctional, promoting in‐stent thrombosis and restenosis. The molecular and biomechanical mechanisms that influence the process of re‐endothelialization in stented segments are incompletely understood. Once the endothelium is restored, endothelial function might still be impaired. Several strategies have been followed to improve endothelial function after coronary stenting. In this review, the effects of stenting on coronary endothelium are outlined and current and future strategies to improve endothelial function after stent deployment are discussed.     

Aging exacerbates negative remodeling and impairs endothelial regeneration after balloon injury

Many older patients, because of their high prevalence of coronary artery disease, are candidates for percutaneous coronary interventions (PCI), but the effects of vascular aging on restenosis after PCI are not yet well understood. Balloon injury to the right carotid artery was performed in adult and old rats. Vascular smooth muscle cell (VSMC) proliferation, apoptotic cell death, together with Akt induction, telomerase activity, p27kip1, and endothelial nitric oxide synthase (eNOS) expression was assessed in isolated arteries. Neointima hyperplasia and vascular remodeling along with endothelial cell regeneration were also measured after balloon injury. Arteries isolated from old rats exhibited a significant reduction of VSMC proliferation and an increase in apoptotic death after balloon injury when compared with adult rats. In the vascular wall of adult rats, balloon dilation induced Akt phosphorylation, and this was barely present in old rats. In arteries from old rats, Akt-modulated cell cycle check points like telomerase activity and p27kip1 expression were decreased and increased, respectively, compared with adults. After balloon injury, old rats showed a significant reduction of neointima formation and an increased vascular negative remodeling compared with adults. These results were coupled by a marked delay in endothelial regeneration in aged rats, partially mediated by a decreased eNOS expression and phosphorylation. Interestingly, chronic administration of L-arginine prevented negative remodeling and improved reendothelialization after balloon injury in aged animals. A decreased neointimal proliferation, an impaired endothelial regeneration, and an increase in vascular remodeling after balloon injury were observed in aged animals. The molecular mechanisms underlying these responses seem to be a reduced Akt and eNOS activity.     

Stresses in peripheral arteries following stent placement: a finite element analysis

The success of stents to restore blood flow in atherosclerotic peripheral arteries is low relative to coronary arteries. It has been shown that joint flexion induces a mechanical environment that makes stent placement in these arteries highly incompatible, and damage and destruction of stents has been recorded. However, the effect of this environment on the stresses in the arteries is unknown. It is hypothesised that the stresses induced in arteries as a result of this mechanical environment could be sufficient to explain the relatively low success rates. To investigate this hypothesis, a finite element model of the stent-artery interaction was developed. Following stent expansion, bending was simulated by applying a displacement boundary condition to the artery. It is found that high stresses occur at the proximal/distal ends of the stent. As high stress and vascular injury are hypothesised to cause restenosis, the results presented here suggest that the mechanical environment of peripheral arteries could be the predominant cause of high restenosis rates.     

Cardiovascular stent design and vessel stresses: a finite element analysis

Intravascular stents of various designs are currently in use to restore patency in atherosclerotic coronary arteries and it has been found that different stents have different in-stent restenosis rates. It has been hypothesized that the level of vascular injury caused to a vessel by a stent determines the level of restenosis. Computational studies may be used to investigate the mechanical behaviour of stents and to determine the biomechanical interaction between the stent and the artery in a stenting procedure. In this paper, we test the hypothesis that two different stent designs will provoke different levels of stress within an atherosclerotic artery and hence cause different levels of vascular injury. The stents analysed using the finite-element method were the S7 (Medtronic AVE) and the NIR (Boston Scientific) stent designs. An analysis of the arterial wall stresses in the stented arteries indicates that the modular S7 stent design causes lower stress to an atherosclerotic vessel with a localized stenotic lesion compared to the slotted tube NIR design. These results correlate with observed clinical restenosis rates, which have found higher restenosis rates in the NIR compared with the S7 stent design. Therefore, the testing methodology outlined here is proposed as a pre-clinical testing tool, which could be used to compare and contrast existing stent designs and to develop novel stent designs.     

Efficiency of endovascular re-interventions for evolving restenosis of different types of stents

The paper compares the results of different treatment options (balloon angioplasty and restenting) for in-stent restenosis in case of evolving restenosis of drug- and nondrug eluting stents. The investigation enrolled 496 coronary heart disease patients with clinical presentation of angina pectoris and/or signs of myocardial ischemia, as well as hemodynamic restenosis of a previously implanted stent. Of them, 216 and 280 patients had restenosis of previously implanted drug- and nondrug-eluting stents, respectively. In the patients with non-drug-eluting stent restenosis, recurrent angina pectoris and the frequency of repeated restenosis were significantly more frequently observed after balloon dilatation than after drug-eluting stent implantation (28.4 and 10.2%; p < 0.05; 19.9 and 8.7%; p < 0.05). In those with drug-eluting stent restenosis, recurrent angina pectoris and the frequency of repeated restenosis did not differ significantly between balloon dilatation of restenosis and implantation of a second drug-eluting stent.     

G-CSF prevents the progression of atherosclerosis and neointimal formation in rabbits

Granulocyte colony-stimulating factor (G-CSF) prevents left ventricular remodeling after myocardial infarction, but its effect on atherosclerosis is unknown. We examined two kinds of rabbit atherosclerosis models. Myocardial infarction-prone Watanabe heritable hyperlipidemic (WHHL-MI) rabbits were treated with G-CSF or saline for 7 days from 14 months old. The vascular injury models were created by inflating angioplasty balloon in the iliac artery of rabbits and were divided into G-CSF and saline group. G-CSF significantly reduced the stenosis score of coronary artery and lipid plaque area of thoracic aorta in WHHL-MI rabbits at 4 weeks after the treatment. In the vascular injury model, G-CSF significantly prevented an increase in neointima/media ratio at 4 weeks after the treatment. G-CSF accelerated the reendothelialization of denuded arteries, and the pretreatment with nitric oxide synthase inhibitor significantly inhibited it. These results suggest that G-CSF has a therapeutic potential for the progression of atherosclerosis.     

冠状动脉支架植入术后高凝状态的研究进展

支架内血栓形成是冠状动脉支架植入术后的重要并发症之一,尽管发生率较低,但严重者可危及生命。冠心病支架植入术后高凝状态源自患者的自身因素及支架植入所导致的一系列病理生理反应,包括斑块破裂、血管内皮损伤、组织因子大量表达、微粒生成增多等,进一步可激活血细胞和凝血系统,重者可导致局部血栓形成。及时检测及防治支架术后的高凝状态对降低支架内血栓的发生率有积极作用。本文主要对冠状动脉支架植入术后高凝状态的研究进展进行了综述。     

Oxidative stress in myocardial ischaemia reperfusion injury: a renewed focus on a long-standing area of heart research

Advances in the treatment of coronary artery disease have seen a significant drop in mortality and morbidity particularly amongst patients with acute myocardial infarction (MI). In particular, percutaneous trans-luminal balloon angioplasty (PTCA) with stenting to re-open atherosclerotic coronary arteries has yielded marked improvement in clinical outcome for patients with acute MI. Furthermore, with the advent of drug-eluting stents occurrence rates for coronary artery restenosis, one common clinical problem associated with angioplasty and stent deployment, have declined markedly. However, coronary restenosis in diabetic patients remains an on-going problem. The success of drug-eluting stents has seen a renewed focus on myocardial ischaemia reperfusion (IR) injury as this represents one area of research where many questions remain unanswered. In particular, the relationship between myocardial IR injury and decreased myocardial micro-vasculature re-flow post PTCA (that ultimately leads to poor clinical outcome and myocardial damage/dysfunction) is one area of research with the potential to decrease current complication rates further in patients suffering myocardial IR injury sustained during MI. This review discusses the role for oxidative stress, oxidant source(s) and both gene regulation and stem-cell therapy as potential strategic targets in the ischaemic myocardium, with the ultimate aim of providing significant cardioprotection in the setting of acute MI.