Modeling distraction osteogenesis: analysis of the distraction rate

Distraction osteogenesis is a useful technique aimed at inducing bone formation in widespread clinical applications. One of the most important factors that conditions the success of bone regeneration is the distraction rate. Since the mechanical environment around the osteotomy site is one of the main factors that affects both quantity and quality of the regenerated bone, we have focused on analyzing how the distraction rate influences on the mechanical conditions and tissue regeneration. Therefore, the aim of the present work is to explore the potential of a mathematical algorithm to simulate clinically observed distraction rate related phenomena that occur during distraction osteogenesis. Improvements have been performed on a previous model (Gómez-Benito et al. in J Theor Biol 235:105–119, 2005) in order to take into account the load history. The results obtained concur with experimental findings: a slow distraction rate results in premature bony union, whereas a fast rate results in a fibrous union. Tension forces in the interfragmentary gap tissue have also been estimated and successfully compared with experimental measurements.     

Sustained expression of transforming growth factor-beta1 by distraction during distraction osteogenesis

Distraction osteogenesis is a well-established clinical treatment for limb length discrepancy and skeletal deformities. In our previous studies, we have shown that the tension at the distraction gap correlated with the plasma bone specific alkaline phosphatase activity during distraction. Transforming growth factor-beta1 (TGF-beta1) has been shown to have a regulatory role in alkaline phosphatase activity during fracture healing. This study is to investigate the expression of TGF-beta1 during distraction as a biological response to mechanically stimulated osteoblastic activity by immunohistochemistry. The expression of TGF-beta1 in the distraction callus was compared with that in the fracture callus. During the distraction phase, the osteoblasts and osteocytes expressed a high level of TGF-beta1. Moderate expression of TGF-beta1 was observed in fibroblast-like cells in the fibrous zone of the distraction callus. After the distraction stopped, the expression of TGF-beta1 in different cell types decreased. In fracture healing, the strong expression of TGF-beta1 declined after the first week. Our results showed that the mechanical force induced and sustained TGF-beta1 expression in osteoblasts and fibroblasts-like cells of the distraction callus. Transforming growth factor-beta1 may play a role in transducing mechanical stimulation to biological tissue during in distraction osteogenesis.     

Rat mandibular distraction osteogenesis: part III. Gradual distraction versus acute lengthening

Distraction osteogenesis is a well-established method of endogenous tissue engineering. This technique has significantly augmented our armamentarium of reconstructive craniofacial procedures. Although the histologic and ultrastructural changes associated with distraction osteogenesis have been extensively described, the molecular mechanisms governing successful membranous distraction remain unknown. Using an established rat model, the molecular differences between successful (i.e., osseous union with gradual distraction) and ineffective (i.e., fibrous union with acute lengthening) membranous bone lengthening was analyzed. Herein, the first insight into the molecular mechanisms of successful membranous bone distraction is provided. In addition, these data provide the foundation for future targeted therapeutic manipulations designed to improve osseous regeneration. Vertical mandibular osteotomies were created in 52 adult male Sprague-Dawley rats, and the animals were fitted with customized distraction devices. Twenty-six animals underwent immediate acute lengthening (3 mm; a length previously shown to result in fibrous union) and 26 animals were gradually distracted (after a 3-day latency period, animals were distracted 0.25 mm twice daily for 6 days; total = 3 mm). Four mandibular regenerates were harvested from each group for RNA analysis on 5, 7, 9, 23, and 37 days postoperatively (n = 40). Two mandibular regenerates were also harvested from each group and prepared for immunohistochemistry on postoperative days 5, 7, and 37 (n = 12). In addition to the 52 experimental animals, 4 control rats underwent sham operations (skin incision only) and mandibular RNA was immediately collected. Control and experimental specimens were analyzed for collagen I, osteocalcin, tissue inhibitor of metalloproteinase-1, and vascular endothelial growth factor mRNA and protein expression. In this study, marked elevation of critical extracellular matrix molecules (osteocalcin and collagen I) during the consolidation phase of gradual distraction compared with acute lengthening is demonstrated. In addition, the expression of an inhibitor of extracellular matrix turnover, tissue inhibitor of metalloproteinase-1, remained strikingly elevated in gradually distracted animals. Finally, this study demonstrated that neither gradual distraction nor acute lengthening appreciably alters vascular endothelial growth factor expression. These results suggest that gradual distraction osteogenesis promotes successful osseous bone repair by regulating the expression of bone-specific extracellular matrix molecules. In contrast, decreased production or increased turnover of bone scaffolding proteins (i.e., collagen) or regulators of mineralization (i.e., osteocalcin) may lead to fibrous union during acute lengthening.     

Computer planning for distraction osteogenesis

Distraction osteogenesis of the mandible has found an application in the treatment of patients with a variety of different mandibular deformities. Compared with the relatively simple unidirectional distraction of long bones as described by Ilizarov, the three-dimensional distraction of the mandible is extremely complex. Whereas experience with orthognathic surgery clearly demonstrates that careful presurgical planning is necessary to achieve predictable outcomes, there are few reported methods for the planning of mandibular distraction. The authors have developed a method for planning distraction osteogenesis of the mandible that involves the use of three-dimensional modeling and animation to simulate distraction osteogenesis in virtual reality. The first step in the authors' treatment planning process is to obtain a three-dimensional computerized scan of the facial skeleton. From this scan, a three-dimensional wire-mesh model is built using animation software. With the same software, a virtual distractor is built and installed on the wire-mesh model. The osteotomies and the distraction process are then simulated. Finally, a recipe for sequencing the linear and angular changes of the distractor is calculated. The authors have used this planning process in seven patients (age range, 4 to 10 years): four with unilateral mandibular deformities and three with bilateral. The planning process has yielded predictable and reproducible results.     

Callus stimulation in distraction osteogenesis

Distraction osteogenesis has been described as in vivo tissue engineering. The ability to stimulate this process for the repair of bony defects or lengthening of congenitally shortened facial structures is likely to significantly impact the field of craniofacial surgery. The purpose of this study was to determine whether mechanical stimulation of the distracted rabbit mandible would accelerate the maturation of the bony callus when applied during the early consolidation period. Twenty adult New Zealand White rabbits underwent unilateral mandibular osteotomy. A uni-directional internal distractor device (Synthes, Paoli, Pa.) was positioned along a plane perpendicular to the line of osteotomy. After a 7-day latency period, distraction was commenced at a rate of 1.0 mm/day for 12 days in all animals. In a control group of 10 rabbits, a consolidation period of 8 weeks was observed before they were killed. In the experimental group of 10 rabbits, daily alternate compression and distraction of 1 mm (sequential compression and distraction) was performed for 3 weeks followed by a 5-week period of rigid fixation. Each animal received a dose of a fluorescent label at three different time points during the study: at the end of the distraction period, 3 weeks after the completion of the distraction phase, and 3 days before it was killed. All animals were killed 8 weeks after the completion of the distraction phase. Undecalcified histologic analysis and 3-point bending tests to failure were performed on the extracted mandibles. The results of the experimental and control groups were compared.Four animals in the control group and three animals in the experimental group were excluded from the study because of screw loosening resulting in distractor dislodgment or because of infection. On histologic analysis, cortical thickness at the center of the callus was found to be significantly greater in the experimental group compared with the control group when normalized to the contralateral hemimandible (83 percent versus 49 percent, respectively; p < 0.007). The ratio of cortical to cancellous bone in the distracted callus was uniformly found to be greater in the experimental specimens. The mineral apposition rate was calculated by using fluorescence microscopy and found to be significantly greater in the experimental group both during the period of sequential compression and distraction (3.2 microm/day versus 2.1 microm/day, p = 0.02) and after the period of sequential compression and distraction (1.4 microm/day versus 1.1 microm/day, p = 0.006). Mechanical testing revealed no significant differences in bending strength or stiffness between experimental or control groups (p = 0.54 and 0.47, respectively). This study has demonstrated that daily alternating compression and distraction of 1 mm amplitude during the early consolidation period has a stimulatory impact on callus formation with respect to osteoblastic activity, remodeling, and maturation of bone. Optimal timing and amplitude of sequential movement, long-term biomechanical differences, and molecular pathways have yet to be elucidated.     

Craniofacial distraction with a modular internal distraction system: evolution of design and surgical techniques.

The present report summarizes the evolution of design for a modular internal distraction system that is applicable throughout the craniofacial region. Eleven patients (5 boys, 6 girls), whose ages ranged from 4 months to 10 years at the time of distraction, constitute the basis for this study. The clinical indications for distraction were exorbitism with corneal exposure (n = 1), obstructive sleep apnea (n = 4), tracheostomy decannulation (n = 1), severe maxillary hypoplasia with class III malocclusion (n = 3), severe vertical and sagittal maxillary deficiency with anophthalmia (n = 1), and relapse following frontoorbital advancement in a case of rare craniofacial clefting (n = 1). Twenty-two distraction devices were used in these 11 patients. Two initial prototypes were tested (prototype 1 = 8 devices; prototype 2 = 2 devices) until the modular internal distraction system (MIDS, Howmedica-Leibinger, Inc.) was developed (n = 12 devices). The craniofacial osteotomies used were Le Fort III (n = 4), monobloc (n = 3), mandibular (n = 3), Le Fort I (n = 2), and cranial (n = 1). The distraction distances ranged from 11 to 28 mm. One patient undergoing mandibular distraction developed transient swelling in the left mandibular region, which responded to antibiotics. There were no other complications. Depending on the age of the patient and the length of distraction, the distraction gap was allowed to consolidate from 6 weeks to 3 months. The devices were then removed on either an outpatient or a 23-hour-stay basis. The modular internal distraction system permits widespread application of easily customizable, buried distraction devices throughout the craniofacial region.     

Mandibular distraction in temporomandibular joint ankylosis

Condylar damage during childhood can produce ankylosis and alteration of the mandibular growth. In case of unilateral ankylosis occurring in early childhood, a mandibular hypoplasia of the affected side may develop. The patients have limitation of mouth opening, facial asymmetry, and chin deviation toward the affected side. The aims of this study are to show the use of distraction osteogenesis in mandibular hypoplasia associated with ankylosis and to present our experience with a new therapeutic option for the treatment of mandibular hypoplasia with unilateral ankylosis in the childhood consisting of the association of arthroplasty to treat the ankylosis and mandibular distraction to correct the facial asymmetry, both accomplished in the same surgical procedure. From November of 1996 to November of 1997, three male patients aged 2, 7, and 13 years with mandibular hypoplasia and ankylosis were treated by distraction osteogenesis. An arthroplasty consisting of the resection of the ankylotic block and interposition of a temporalis muscle flap, plus coronoidectomy was done in two of them and mandibular distraction was done in all three patients. Articular functional rehabilitation began on the first postoperative day. Mandibular distraction began on the fifth postoperative day with a rate of 1 mm per day, ending when the facial symmetry was achieved. From the first postoperative day, an increase in the mouth opening was achieved; this increase continued until ending the distraction. The average duration of distraction was 22 days. Average duration of consolidation was 6 weeks. Oral opening increased from 10 mm to 35 mm in the 7-year-old patient, from 9 mm to 27 mm in the 2-year-old patient, and from 14 mm to 38 mm in the 13-year-old patient. To date, oral opening and facial symmetry persist. Osseous mandibular distraction together with arthroplasty offers an excellent new alternative for treatment of patients with mandibular hypoplasia and associated ankylosis, with minimal morbidity and complications.     

Avian distraction displays: a review

Distraction displays are conspicuous behaviours functioning to distract a predator's attention away from the displayer's nest or young, thereby reducing the chance of offspring being discovered and predated. Distraction is one of the riskier parental care tactics, as its success derives from the displaying parent becoming the focus of a predator's attention. Such displays are prominent in birds, primarily shorebirds, but the last comprehensive review of distraction was in 1984. Our review aims to provide an updated synthesis of what is known about distraction displays in birds, and to open up new areas of study by highlighting some of the key avenues to explore and the broadened ecological perspectives that could be adopted in future research. We begin by drawing attention to the flexibility of form that distraction displays can take and providing an overview of the different avian taxa known to use anti-predator distraction displays, also examining species-specific sex differences in use. We then explore the adaptive value and evolution of distraction displays, before considering the variation seen in the timing of their use over a reproductive cycle. An evaluation of the efficacy of distraction compared with alternative anti-predator tactics is then conducted via a cost–benefit analysis. Distraction displays are also found in a handful of non-avian taxa, and we briefly consider these unusual cases. We conclude by postulating why distraction is primarily an avian behaviour and set out our suggestions for future research into the evolution and ecology of avian distraction displays.     

Increased visual distraction can impair landing biomechanics

Failed jump landings represent a key mechanism of musculoskeletal trauma. It has been speculated that cognitive dual-task loading during the flight phase may moderate the injury risk. This study aimed to explore whether increased visual distraction can compromise landing biomechanics. Twenty-one healthy, physically active participants (15 females, 25.8 ± 0.4 years) completed a series of 30 counter-movement jumps (CMJ) onto a capacitive pressure platform. In addition to safely landing on one leg, they were required to memorize either one, two or three jersey numbers shown during the flight phase (randomly selected and equally balanced over all jumps). Outcomes included the number of recall errors as well as landing errors and three variables of landing kinetics (time to stabilization/TTS, peak ground reaction force/pGRF, length of the centre of pressure trace/COPT). Differences between the conditions were calculated using the Friedman test and the post hoc Bonferroni-Holm corrected Wilcoxon test. Regardless of the condition, landing errors remained unchanged (p = .46). In contrast, increased visual distraction resulted in a higher number of recall errors (chi² = 13.3, p = .001). Higher cognitive loading, furthermore, appeared to negatively impact mediolateral COPT (p < .05). Time to stabilization (p = .84) and pGRF (p = .78) were unaffected. A simple visual distraction in a controlled experimental setting is sufficient to adversely affect landing stability and task-related short-term memory during CMJ. The ability to precisely perceive the environment during movement under time constraints may, hence, represent a new injury risk factor and should be investigated in a prospective trial.     

Long-term skeletal stability after maxillary advancement with distraction osteogenesis using a rigid external distraction device in cleft maxillary deformities

Rigid external distraction is a highly effective technique for correction of maxillary hypoplasia in patients with orofacial clefts. The clinical results after correction of sagittal maxillary deformities in both the adult and pediatric age groups have been stable. The purpose of this retrospective longitudinal cephalometric study was to review the long-term stability of the repositioned maxilla in cleft patients who underwent maxillary advancement with rigid external distraction. Between April 1, 1995, and April 1, 1999, 17 consecutive patients with cleft maxillary hypoplasia underwent maxillary advancement using rigid external distraction. There were 13 male patients and four female patients, with ages ranging from 5.2 to 23.6 years (mean, 12.6 years). After a modified complete high Le Fort I osteotomy and a latency period of 3 to 5 days, patients underwent maxillary advancement with rigid external distraction until proper facial convexity and dental overjet and overbite were obtained. After active distraction, a 3- to 4-week period of rigid retention was undertaken; this was followed by removable elastic retention for 6 to 8 weeks using, during sleep time, an orthodontic protraction face mask. Cephalometric radiographs were obtained preoperatively, after distraction, at 1 year after distraction, and 2 or more years after distraction. The mean follow-up was 3.3 years (minimum, 2.1 years; maximum, 5.3 years). The following measurements were obtained in each cephalogram: three linear horizontal and two linear vertical maxillary measurements, two angular craniomaxillary measurements, and one craniomandibular measurement. Differences between the preoperative and postoperative cephalometric values were analyzed by paired t tests (p < 0.05). The cephalometric analysis demonstrated postoperatively significant advancement of the maxilla. In addition, the mandibular plane angle opened 1.2 degrees after surgery. After the 1- to 3-year follow-up period, the maxilla was stable in the sagittal plane. Minimal anteroposterior growth was observed in the maxilla compared with that exhibited in the anterior cranial base. However, there was significant vertical maxillary growth over the 3-year observation period. The mandibular plane angle tended to decrease during the follow-up period. The cephalometric data from this study support the clinical impression of maxillary stability after maxillary advancement with rigid external distraction in cleft patients. This effective and stable technique is now considered for all pediatric patients with severe cleft maxillary hypoplasia and for adolescent and adult patients with moderate to severe deformities.     

The effects of magnitude and frequency of distraction forces on tissue regeneration in distraction osteogenesis of the mandible.

Callus distraction has become an accepted treatment procedure to lengthen hypoplastic mandibles in humans. For this purpose, extraoral and intraoral devices have been applied successfully. The effects of the distraction vector, distractor stability, and rate and frequency of callus distraction on the regenerating tissues have been examined in various studies. In an experimental animal trial on pigs (n = 12), a newly developed microhydraulic osteodistractor was tested. The animals were evenly assigned to two groups to perform a continuous and noncontinuous osteodistraction of the mandible. Initially, the forces necessary to distract the pig mandibles were recorded from a noncontinuous distraction procedure; the results were then used to perform continuous bone distraction. Besides testing the new distractor, the study proved that in continuous osteodistraction, intramembranous bone regeneration occurred, whereas in noncontinuous osteodistraction the bone regeneration process followed a chondroid ossification. In continuous osteodistraction, the bone regeneration proceeded at a higher speed with the lower distraction forces compared with noncontinuous distraction, thereby reducing the consolidation period. Clinical and microscopical results are presented.