Quantitative analysis of plasmid forms by agarose and capillary gel electrophoresis.

Plasmids may appear in different forms: circular with different degrees of coiling, partially cleaved or linear, and multimeric as concatamers or catenates. Capillary gel electrophoresis (CGE) of plasmid samples allows the determination of plasmid form distribution. Monomeric and dimeric plasmid DNA forms were separated by both CGE and agarose gel electrophoresis (AGE). The pattern of isoform bands from AGE was compared to the corresponding peak pattern from CGE, and differences in the relative mobility of the plasmid forms between the two methods were found. The comparison of AGE and CGE allows the assignment of AGE bands to CGE peaks. Additionally, the different isoforms can now be quantified by CGE. Routine plasmid form analysis by CGE may be automated, allowing easy, fast, and highly reliable quantification. CGE also offers high resolution and the amount of DNA required is very low. Therefore this method is very useful for the analysis of therapeutics based on plasmid DNA during their production, isolation, and formulation.     

Oligonucleotide analysis by gel capillary electrophoresis

Several million oligonucleotides are synthesized each year for a broad variety of molecular biology applications. Steady improvements in the synthesis chemistry efficiency and the automated DNA synthesizers have made production of oligonucleotides routine and reliable. Many applications, such as PCR and sequencing, are often successful when the primers have not been rigorously purified. To ensure an adequate level of quality and purity, rapid and convenient analytical methods are necessary for the dozens of oligonucleotides produced each day by a DNA synthesis laboratory. Traditional methods of analysis have been HPLC and polyacrylamide slab tel electrophoresis (PAGE). Gel capillary electrophoresis is a new option, combining the advantages of the HPLC and PAGE, with unprecedented resolution and speed.     

Quantitative metabolome analysis using capillary electrophoresis mass spectrometry

A new approach for the comprehensive and quantitative analysis of charged metabolites by capillary electrophoresis mass spectrometry (CE-MS) is proposed. Metabolites are first separated by CE based on charge and size and then selectively detected using MS by monitoring over a large range of m/z values. This method enabled the determination of 352 metabolic standards and its utility was demonstrated in the analysis of 1692 metabolites from Bacillus subtilis extracts, revealing significant changes in metabolites during B. subtilis sporulation.     

Quantitative analysis of propofol in whole blood using capillary electrophoresis

We have developed a straightforward capillary electrophoresis method capable of quantifying clinically relevant propofol concentrations in whole blood from patients undergoing aortocoronary bypass grafting with cardiopulmonary bypass. The method utilizes 400 μL of whole blood and is capable of detecting propofol in the ng/mL range. Factors affecting reproducibility and reliability of analytical results for clinically relevant samples are discussed. The method was used to evaluate propofol concentrations in blood samples from 30 patients. The distribution in the whole blood concentration achieved in patients advocates the need for target-achieved monitoring techniques.     

Evaluation of capillary HPLC/mass spectrometry as an alternative analysis method for gel electrophoresis of oligonucleotides

A method has been developed to monitor the enzymatic incorporation of nucleotides in DNA by electrospray HPLC mass spectrometry. The main advantages of mass spectrometry over electrophoresis are the ability to directly characterize the reaction products and the shorter analysis time.     

Quantitative analysis of one-dimensional gel electrophoresis profiles

Ageneral method for the one-dimensional quantitative analysisof band profiles from an autoradiographed or stained gel isdescribed. Curved lanes may be tracked, noise across the widthof theband reduced by local averaging of densities within aselected window, and background–corrected density profilesproduced. Sections of each profile can be subjected to a choiceof three methods of peak-area determination, depending on thetype of gel and the requirements of the analysis being carriedout. In the first method, simple integration is used to measurethe area under the profile between any two positions. The secondmethod integrates a Gaussian distribution fitted to a singlepeak. Where bands overlap, the third method resolves peaks intotheir component areas, taking into account the observed increasein the width of the band in the direction of electrophoreticmigration. This is incorporated into a least-squares profile–fittingmethod, which is shown to be both accurate and efficient. Received on November 22, 1989; accepted on December 8, 1989     

High-throughput glycosylation analysis of therapeutic immunoglobulin G by capillary gel electrophoresis using a DNA analyzer

The Fc glycosylation of therapeutic antibodies is crucial for their effector functions and their behavior in pharmacokinetics and pharmacodynamics. To monitor the Fc glycosylation in bioprocess development and characterization, high-throughput techniques for glycosylation analysis are needed. Here, we describe the development of a largely automated high-throughput glycosylation profiling method with multiplexing capillary-gel-electrophoresis (CGE) with laser induced fluorescence (LIF) detection using a DNA analyzer. After PNGaseF digestion, the released glycans were labeled with 9-aminopyrene-1,3,6-trisulfonic acid (APTS) in 96-well plates, which was followed by the simultaneous analysis of up to 48 samples. The peak assignment was conducted by HILIC-UPLC-MS/MS of the APTS-labeled glycans combined with peak fractionation and subsequent CGE-LIF analysis of the MS-characterized fractions. Quantitative data evaluation of the various IgG glycans was performed automatically using an in-house developed software solution. The excellent method accuracy and repeatability of the test system was verified by comparison with two UPLC-based methods for glycan analysis. Finally, the practical value of the developed method was demonstrated by analyzing the antibody glycosylation profiles from fermentation broths after small scale protein A purification.     

Quantitative analysis of sugar constituents of glycoproteins by capillary electrophoresis

A method for quantitative analysis of monosaccharides including N- acetylneuraminic acid derived from sialic acid-containing oligosaccharides and glycoproteins is presented. The analysis is based on the combination of chemical and enzymatic methods coupled with capillary electrophoretic (CE) separation and laser-induced fluorescence (LIF) detection. The present method utilizes a simplified acid hydrolysis procedure consisting of mild hydrolysis (0.1 M TFA) to release sialic acid and strong acid hydrolysis (2.0 N TFA) to produce amino and neutral sugars. Amino sugars released from strong acid hydrolysis of oligosaccharides and glycoproteins were reacetylated and derivatized with 8-aminopyrene-1,3,6-trisulfonate (APTS) along with neutral sugars in the presence of sodium cyanoborohydride to yield quantitatively the highly stable fluorescent APTS adducts. N- acetylneuraminic acid (Neu5Ac), a major component of most mammalian glycoproteins, was converted in a fast specific reaction by the action of neuraminic acid aldolase (N-acylneuraminate pyruvate-lyase EC 4.1.3.3) to N-acetylmannosamine (ManNAc) and pyruvate. ManNAc was then derivatized with APTS in the same manner as the other monosaccharides. This method was demonstrated for the quantitation of pure Neu5Ac and the species derived from mild acid hydrolysis of 6'-sialyl-N- acetyllactosamine and bovine fetuin glycan. Quantitative recovery of the N-acetylmannosamine was obtained from a known amount of Neu5Ac in a mixture of seven other monosaccharides or from the sialylated oligosaccharides occurring in glycoproteins. The sequence of procedures consists of acid hydrolysis, enzymatic conversion and APTS derivatization which produced quantitative recovery of APTS- monosaccharide adducts. The detection limits for sugars derivatized with APTS and detected by CE-LIF are 100 pmol for Neu5Ac and 50 pmol for the other sugars.      

Quantitative analysis of DNA aberrations amplified by competitive polymerase chain reaction using capillary electrophoresis

We compared the use of capillary electrophoresis (CE) in a polymer network with the use of slab gel electrophoresis for the quantitative analysis of polymerase chain reaction (PCR)-amplified DNA samples. We quantified residual lymphoma cells carrying a translocation between chromosomes 14 and 18, in consecutive patient peripheral blood samples that were amplified by competitive PCR. For CE analysis we used a 4% linear polyacrylamide network. Results show that the calculated number of translocations in patient samples using both analyses were comparable. We conclude that CE is a sensitive, non-radioactive, fast and accurate method for quantitation of competitive PCR products.     

Culture-independent analysis of probiotic products by denaturing gradient gel electrophoresis

In order to obtain functional and safe probiotic products for human consumption, fast and reliable quality control of these products is crucial. Currently, analysis of most probiotics is still based on culture-dependent methods involving the use of specific isolation media and identification of a limited number of isolates, which makes this approach relatively insensitive, laborious, and time-consuming. In this study, a collection of 10 probiotic products, including four dairy products, one fruit drink, and five freeze-dried products, were subjected to microbial analysis by using a culture-independent approach, and the results were compared with the results of a conventional culture-dependent analysis. The culture-independent approach involved extraction of total bacterial DNA directly from the product, PCR amplification of the V3 region of the 16S ribosomal DNA, and separation of the amplicons on a denaturing gradient gel. Digital capturing and processing of denaturing gradient gel electrophoresis (DGGE) band patterns allowed direct identification of the amplicons at the species level. This whole culture-independent approach can be performed in less than 30 h. Compared with culture-dependent analysis, the DGGE approach was found to have a much higher sensitivity for detection of microbial strains in probiotic products in a fast, reliable, and reproducible manner. Unfortunately, as reported in previous studies in which the culture-dependent approach was used, a rather high percentage of probiotic products suffered from incorrect labeling and yielded low bacterial counts, which may decrease their probiotic potential.     

High-throughput glycosylation analysis of therapeutic immunoglobulin G by capillary gel electrophoresis using a DNA analyzer

The Fc glycosylation of therapeutic antibodies is crucial for their effector functions and their behavior in pharmacokinetics and pharmacodynamics. To monitor the Fc glycosylation in bioprocess development and characterization, high-throughput techniques for glycosylation analysis are needed. Here, we describe the development of a largely automated high-throughput glycosylation profiling method with multiplexing capillary-gel-electrophoresis (CGE) with laser induced fluorescence (LIF) detection using a DNA analyzer. After PNGaseF digestion, the released glycans were labeled with 9-aminopyrene-1,3,6-trisulfonic acid (APTS) in 96-well plates, which was followed by the simultaneous analysis of up to 48 samples. The peak assignment was conducted by HILIC-UPLC-MS/MS of the APTS-labeled glycans combined with peak fractionation and subsequent CGE-LIF analysis of the MS-characterized fractions. Quantitative data evaluation of the various IgG glycans was performed automatically using an in-house developed software solution. The excellent method accuracy and repeatability of the test system was verified by comparison with two UPLC-based methods for glycan analysis. Finally, the practical value of the developed method was demonstrated by analyzing the antibody glycosylation profiles from fermentation broths after small scale protein A purification.     

An investigation of pectin methylesterification patterns by two independent methods: capillary electrophoresis and polysaccharide analysis using carbohydrate gel electrophoresis

The analysis of partially methylesterified oligogalacturonides plays a key role both in the elucidation of the fine structure of the polysaccharide pectin and in the study of pectin-acting enzymes. Experimental methods performing the separation, detection and quantification of oligogalacturonides are, therefore, of crucial importance in the drive to understand structure-function relationships in pectin containing systems, both in vitro and in vivo. In this work standard samples of unesterified and partially methylesterifed galacturonides, and enzymatic digests of several pectin samples possessing distinct intramolecular patterns of methylesterification were studied using capillary electrophoresis (CE) and polysaccharide analysis using carbohydrate gel electrophoresis (PACE). In addition to yielding interesting information regarding the fine structures of the different pectic substrates digested, the study has been used as a vehicle in order to compare the two recently reported methods.     

Single-based resolution for oligodeoxynucleotides and their phosphorothioate modifications by replaceable capillary gel electrophoresis

A replaceable capillary gel electrophoretic (replaceable CGE) method was developed for the separation of two sets of model compounds of single-stranded oligodeoxynucleotide mixtures (18-20 mers), phosphodiester oligodeoxynucleotides (PO-ODNs) and their phosphorothioate modifications (PS-ODNs), with equal sequences differing in a single base. Polyethylene glycol (PEG) 35000 was chosen as the sieving matrix. It was confirmed that PEG polymer solution less influenced resolutions of the PS-ODNs compared with those of the PO-ODNs, while acetonitrile used as an additive in the system improved the separation significantly. It was also noticed that the effect of temperature on separation was much larger than that of denaturant urea.     

Multiple-locus variable-number tandem-repeats analysis of Listeria monocytogenes using multicolour capillary electrophoresis and comparison with pulsed-field gel electrophoresis typing

The multiple-locus variable-number tandem-repeats analysis (MLVA) method for genotyping has proven to be a fast and reliable typing tool in several bacterial species. MLVA is in our laboratory the routine typing method for Salmonella enterica subsp. enterica serovar Typhimurium and Escherichia coli O157. The gram-positive bacteria Listeria monocytogenes, while not isolated as frequent as S. Typhimurium and E. coli, causes severe illness with an overall mortality rate of 30%. Thus, it is important that any outbreak of this pathogen is detected early and a fast trace to the source can be performed. In view of this, we have used the information provided by two fully sequenced L. monocytogenes strains to develop a MLVA assay coupled with high-resolution capillary electrophoresis and compared it to pulsed-field gel electrophoresis (PFGE) in two sets of isolates, one Norwegian (79 isolates) and one Swedish (61 isolates) set. The MLVA assay could resolve all of the L. monocytogenes serotypes tested, and was slightly more discriminatory than PFGE for the Norwegian isolates (28 MLVA profiles and 24 PFGE profiles) and opposite for the Swedish isolates (42 MLVA profiles and 43 PFGE profiles).     

Quantitation of polymerase chain reaction products by capillary electrophoresis using laser fluorescence

In samples where the amount of DNA is limited, the polymerase chain reaction (PCR) can amplify specific regions of the DNA. A quantitative analysis of the PCR product would be desirable to ensure sufficient DNA is available for analysis. In this study, we examine the use of capillary electrophoresis (CE) with laser fluorescence detection for quantitation of PCR products. A coated open tubular capillary was used with a non-gel sieving buffer and a fluorescent intercalating dye to obtain results within 20 minutes. Using an internal standard, peak migration time was below 0.1% relative standard deviation (R.S.D.) with a peak area precision of 3% R.S.D. In comparison to quantitation by hybridization, (i.e., slot blot) and spectrophotometric analysis, capillary electrophoresis shows distinct advantages due to its ability to separate unincorporated primers and PCR byproducts from the targeted PCR product. The results demonstrate that CE can be used to monitor the quality and quantity of the PCR product.     

Determination of antisense phosphorothioate oligonucleotides and catabolites in biological fluids and tissue extracts using anion-exchange high-performance liquid chromatography and capillary gel electrophoresis

Chemically modified phosphorothioate oligodeoxynucleotides (ODNs) have become critical tools for research in the fields of gene expression and experimental therapeutics. Bioanalytical assays were developed that utilized fast anion-exchange high-performance liquid chromatography (HPLC) and capillary gel electrophoresis (CGE) for the determination of 20-mer ODNs in biological fluids (plasma and urine) and tissues. A 20 mer ODN in the antisense orientation directed against DNA methyltransferase (denoted as MT-AS) was studied as the model ODN. The anion-exchange HPLC method employed a short column packed with non-porous polymer support and a ternary gradient elution with 2 M lithium bromide containing 30% formamide. Analysis of the MT-AS is accomplished within 5 min with a detection limit of approximately 3 ng on-column at 267 nm. For plasma and urine, samples were diluted with Nonidet P-40 in 0.9% NaCl and directly injected onto the column, resulting in 100% recovery. For tissue homogenates, a protein kinase K digestion and phenol–chloroform extraction were used, with an average recovery of about 50%. Since the HPLC assay cannot provide one-base separation, biological samples were also processed by an anion-exchange solid-phase extraction and a CGE method to characterize MT-AS and its catabolites of 15–20-mer, species most relevant to biological activity. One base separation, under an electric field of 400 V/cm at room temperature, was achieved for a mixture of 15–20-mer with about 50 pg injected. Assay validation studies revealed that the combined HPLC–CGE methods are accurate, reproducible and specific for the determination of MT-AS and its catabolites in biological fluids and tissue homogenates, and can be used for the pharmacokinetic characterization of MT-AS.     

High-performance separation of polynucleotides by capillary gel electrophoresis.

Capillary gel electrophoresis was applied to the high speed separation of DNA and RNA. Factors affecting resolution and speed were optimized for the single base resolution of polynucleotides. Polynucleotides up to 350 bases were completely resolved within 38 min under optimum conditions.     

Quantitative characterization of specific genomic promoters using agarose gel electrophoresis

Over the past decade a large number of studies have focused attention on the role of nucleosomes as negative and positive regulators of specific nuclear functions. Due to the lack of an analytical method to determine the higher order conformation of the nucleosomal arrays that encompass specific genetic loci (e.g., promoters, enhancers), research emphasis has mostly been centered on chromatin remodeling and histone posttranslational modifications. We have recently developed an agarose gel electrophoresis method that permits us to analyze the higher order structure of specific in vivo assembled chromatin fragments. After calibration using a well-defined in vitro system, we have been able to experimentally determine the size, shape, and conformational flexibility of the Mouse Mammary Tumor Virus long-terminal repeat promoter region in its repressed and activated states. These studies pave the way for widespread analyses of the higher order structure of specific, functionally important chromosomal loci, and in so doing enhance our understanding of the roles that the higher order structure of chromatin play in genome regulations.     

Proteome analysis of rat hippocampal neurons by multiple large gel two-dimensional electrophoresis

The goal of the present study was to detect as many protein spots as possible in mammalian cells using two-dimensional gel electrophoresis (2-DE). For proteome analysis, it is of importance to reveal as many proteins as possible. A single standard 2-DE gel (pH 3-10, 18 cm x 20 cm, 13.5% gel) could detect 853 spots from proteins of cultured rat hippocampal neurons when visualized by silver staining. To increase the resolution of the separation and the number of detectable proteins by 2-DE, we utilized seven different narrow pH range immobilized pH gradients in the first dimension. In the second dimension, fourteen long SDS polyacrylamide gels were used: seven 7.5% gels for the separation of high molecular mass proteins (> or = 40 kDa) and seven 13.5% gels for the separation of low molecular mass proteins (< or = 40 kDa). Three hundred and sixty microg of proteins from cultured hippocampal neurons were loaded on to individual gels and visualized by silver staining. All 14 gel images were assembled into a 70 cm x 67 cm cybergel that contained 6677 protein spots, thereby indicating that the utilization of the present strategy led to a 783% increase in the number of detected spots in comparison to the standard procedure. Loading double the amount (720 microg) of proteins on to a 13.5% gel led to a 184% increase in the number of detected spots, thereby indicating that the present strategy has a potential to display more protein spots in the cybergels.